Crystal structure of mixed sodium-potassium paradodecatungstate 6-hydrate

The crystal structure of K7Na3[H2W12O42]3 . 6H(2)O was determined by X-ray crystallography,and refined to R=0.0864 based on 7024 observed reflections (I>2 sigma(I)). The crystallographic parameters are a=11.755(2), b=13.0493(3), c=16.289(3) Angstrom; alpha=77.13(3)degrees, beta=82.92(3)degrees, gamma=89.65(3)degrees, triclinic, space group, P (1) over bar, V=2416.7(8) Angstrom(3), Z=2, M-r=3330.98, D-cal=4.578Mg/m(3), F(000)=2904; mu (MoK alpha)=29.170mm(-1), T=293K. Two independent polyanions are centered respectively at 1,1,1/2 and 1/2, 1/2, 0, approximately perpendicular to each other with dihedral angle between the equatorial planes of the molecules at 96 degrees. K+ and Na+ respectively occupy the clefts of the two discrete polyanions.

Hydrothermal synthesis and crystal structure of sandwich-like heteropolymolybdophosphates

Sandwich-like heteropoly molybdochromophosphates of supermolecular compound [NH3(CH2)(6)NH3](2)H-3{Cr[Mo6O15(HPO4)(H2PO4)(3)](2)}. 4H(2)O has been hydrothermally synthesized and the single crystal structure has been determined by X-ray diffraction. The crystal data are has follows: triclinic, space group P (1) over bar a=12.156(2), b=12.809(3), c=13.530(3) Angstrom, alpha=102.46(3)degrees, beta=93.67(3)degrees, gamma=93.46(3)degrees, V=2046.9(7) Angstrom(3), Z=1, M-r=2768.69, D-c=2.246 g/cm(-3), F(000)=1337, mu=2.162 mm(-1). The structure has been refined to R=0.0666 and wR=0.1745 by full-matrix least-squares method. The title compound is composed of 1, 6-diaminohexane, water molecules, and {Cr[Mo6O15(HPO4)(H2PO4)(3)](2)}(7-) anion which consists of six oxygen atoms from two [Mo6P4] units with a sandwich-like transition metal atom Cr located at the center of symmetry.

Synthesis and crystal structure of a novel butterfly-like complex, [WOS3Cu2(PPh3)(2)(Py)(2)] (Py = pyridine)

A new butterfly-like cluster [WOS3Cu2(PPh3)(2)(Py)(2)] was obtained by reacting [WOS3Cu2(PPb3)(3)] with pyridine. The crystal structure of the cluster has been determined by X-ray diffraction. The compound shows an unusual folded structure, in which two 4-coordinate Cu atoms are bound to the WOS3 moiety via two S-S edges.

Synthesis, crystal structure and luminescence studies of a lanthanide coordination polymer with a new double betaine ligand

A novel europium(III) coordination polymer with a new double betaine derivative, {[Eu(L')(NO3)(H2O)(3)](NO3)(2). 3.5H(2)O}(n) (L-1 = 1,3-bis(pyridinio-4-carboxylato)-propane) has been synthesized and its structure determined. Its luminescence properties have also been studied. The title metal carboxylate coordination polymer contains centrosymmetric dimeric units in which each pair of metal ions is linked by a pair of syn-anti carboxylato-O,O' groups, and each pair of such dimeric units is bridged by the backbones of L-1 ligands to form infinite double chains in the b direction. These metal carboxylate chains are further cross-linked by hydrogen bonds among both coordinated and discrete nitrate anions, aqua ligands and lattice water molecules to form a three-dimensional network. Luminescent data show that the L-1 ligand is a good energy donor and the complex has a relatively long luminescent lifetime.

The NMR-spectroscopic and X-ray crystal-structural characterization of two Cp*Ir halfsandwich complexes containing the 1,2-dicarba-closo-dodecaborane-1,2-diselenolato ligand

The reaction of [Cp*IrCl2](2) with dilithium 1,2-orthocarborane-1,2-diselenolate 3 leads to the green 16-electron diselenolene complex [Cp*Ir{Se2C2(B10H10)}] (4) which takes up two-electron ligands such as trimethylphosphane to give the 18-electron diselenolate derivative [Cp*Ir(PMe3)-{Se2C2(B10H10)}] (5). The molecular structures of 4 and 5 were determined by X-ray crystal structure analysis. The Se-77-nuclear shielding in 4 is lower by almost 500 ppm relative to that in 5.

Crystal Structure of [PrAl(CF3COO)(2)(CF3CHOO)(C2H5)(2)(C4H8O)(2)](2)

[PrAl (CF3COO)(2) (CF3CHOO) (C2H5)(2) (C4H8O)(2)](2) M-r = 1420. 56, monoclinic, P2(1)/n, a = 10. 651 (6) , b = 24. 276(9), c = 11. 110(5) Angstrom, beta = 107. 650 (4)degrees , V = 2737. 4(1) Angstrom (3) , Z = 2, D-c = 3. 45 g/cm(3) , F(000) = 2816 , T = 233K, MoK alpha radiation (lambda= 0. 71069 Angstrom), mu(MoK alpha) = 38. 017 cm(-1) , R = 0. 048 for 2847 observed reflections (I greater than or equal to 3 sigma(I)). It is isostructural with [LnAl (CF3COO)(2) (CF3CHOO) -R-2 (C4H8O)(2)](2) (Ln = Ho, R = Et; Ln = Ndt Y, R = Bu-1). Pr3+ is coordinated by eight oxygen atoms from five bridging ligands and two THF forming a distorted bicap-prism.

Synthesis of the first mono(cyclopentadienyl)lanthanide Schiff base complex bearing C-2-symmetric tetradentate ligand: crystal structure of [(eta(5)-C5H5)Yb(mu-OC20H20N2O)](2)(mu-THF)(THF)

Reaction of YbCl3 with 3 equimolar CpNa (Cp = cyclopentadienide) in THF, followed by treatment with trans-(+/-)-N,N'-bis(salicylidene)-1,2-cyclohexanediamine led to the isolation of first mono(cyclopentadienyl) lanthanide Schiff base complex, [(eta(5)-C5H5)Yb(mu-OC20H20N2O)](2) (mu-THF)(THF) (1). The molecular structure of 1 shows that it is a dimer in which the two [(eta(5)-C5H5)Yb(mu-OC20H20N2O)] units connecting via a bridging THF oxygen and two bridging oxygen atoms from Schiff base ligands. (C) 1998 Elsevier Science S.A.

Electrochemical scanning tunneling microscopy and electrochemical quartz crystal microbalance study of the adsorption of phenanthraquinone accompanied by an electrochemical redox reaction on the Au electrode

In situ electrochemical scanning tunneling microscopy (ECSTM) and an electrochemical quartz crystal microbalance (EQCM) have been employed to follow the adsorption/desorption processes of phenanthraquinone (PQ sat. in 0.1 mol l(-1) HClO4, solution) accompanied with an electrochemical redox reaction on the Au electrode. The result shows that: (1) the reduced form PQH(2) adsorbed at the Au electrode and the desorption occurred when PQH(2) was oxidized to PQ; (2) the adsorption process initiates at steps or kinks which provide high active sites on the electrode surface for adsorption, and as the potential shifts to negative, a multilayer of PQH(2) may be formed at the Au electrode; (3) the reduced PQH(2) adsorbed preferentially in the area where the tip had been scanned continually; this result suggests that the tip induction may accelerate the adsorption of PQH(2) on the Au(111) electrode. Two kinds of possible reason have been discussed; (4) high resolution STM images show the strong substrate lattice information and the weak monolayer adsorbate lattice information simultaneously. The PQH(2) molecules pack into a not perfectly ordered condensed physisorbed layer at potentials of 0.1 and 0.2 V with an average lattice constant a = 11.5 +/- 0.4 Angstrom, b = 11.5 +/- 0.4 Angstrom, and gamma = 120 +/- 2 degrees; the molecular lattice is rotated with respect to the substrate lattice by about 23 +/- 2 degrees. (C) 1997 Elsevier Science S.A.

Electrochemical quartz crystal microbalance study for vanadium hexacyanoferrates: monitoring of film growth and ion effects during redox reactions

An electrochemical quartz crystal microbalance was employed to monitor directly the growth of vanadium hexacyanoferrate (VHF) films on platinum substrates during electrodeposition and interfacial coagulation in the solution containing sulfuric acid electrolyte, vanadium(IV) and hexacyanoferrate(III). Mass changes of the gold/crystal working electrode were correlated with cyclic voltammetry data. Effects of cations (NH4+, Li+, Na+ and K+), anions (SO42- and NO3-) and solvent during redox reactions of the films were studied. The results show that cations were incorporated into the film during reduction and expelled from the film during oxidation. Solvent also participates in VHF electrochemistry, and its role cannot be neglected. Anions play no role in VHF electrochemistry. (C) 1997 Elsevier Science S.A.

Synthesis, properties and crystal structure of a heteropoly compound containing titanium

K4H2CoW12O40. 2Ti02 . 9H(2)O crystallizes from an aqueous solution of Na2WO4, Co(OAc)(2) and Ti(SO4)(2). The compound has very similar i.r. and u.v. spectra to those of [CoW12O40](6-) and [CoW11TiO40](8-) but its polarographic behaviour is different from that of [CoW11TiO40](8-) and exhibits only reduction of tungsten(VI). A single crystal structural analysis indicates that this compound consists of the heteropolyanion [CoW12O40](6-), titanium-oxygen chain, potassium ions and water molecules.

Chemical bond analysis of nonlinearity of urea crystal

A novel and quantitative study on structure-property relationships has been carried out in urea crystal, based on the dielectric theory of complex crystals and the modified Levine bond charge model, mainly from the chemical bond viewpoint. For the first time, it was treated like this, and the bond parameters and linear and nonlinear characteristics of constituent chemical bonds were presented quantitatively. The theoretical result agrees satisfactorily with the experimental datum and can reasonably explain the nonlinear origin of urea crystal, that is, the C-N bond in the conjugated system of bonds O double left arrow C<--N-H. At the same time, the novel method should be a useful tool toward the future development of the search for new nonlinear optical (NLO) materials in the organic crystal field.

Synthesis, crystal structure and magnetic properties of a series of polymeric lanthanoid-copper complexes [Ln(2)Cu(3){O(CH2-CO2)(2)}(6)].nH(2)O (Ln=La, Nd, n=9; Ln=Er, n=6)

The reaction of diglycolic acid, O(CH2CO2H)(2), with Cu(NO3)(2) . H2O and lanthanoid nitrate hydrate produces a series of novel Ln-Cu mixed metal complexes, [Ln(2)CU(3){O(CH2CO2)(2)}(6)]. nH(2)O (Ln = La, Nd, n = 9; Ln = Er, n = 6), which have been characterized by elemental analysis, i.r. spectroscopy, magnetic measurements and X-ray crystallography. The Ln(3+) and Cu2+ ions are connected by the carboxylate groups of the ligands, resulting in the formation of a complicated network.

The crystal structure and drawing-induced polymorphism in poly(aryl ether ketone)s .2. Poly(ether ether ketone ketone), PEEKK

The crystal structure, morphology and polymorphism induced by uniaxial drawing of poly(ether ether ketone ketone) [PEEKK] have been studied by transmission electron microscopy (TEM), electron diffraction (ED) and wide angle X-ray diffraction (WAXD). On the basis of WAXD and ED patterns,the crystal structure of unoriented PEEKK is determined to have two-chain orthorhombic packing with unit cell parameters of a 0.772 nm, b = 0.600 nm, c = 1.004 nm (form I), A stress-induced crystal modification (form II) is identified and found to possess a two-chain orthorhombic lattice with unit cell dimensions of a = 0.461 nm, b = 1.074 nm, c = 1.080 nm. The 7.5% increase in c-axis dimension for form II is attributed to an overextended chain conformation, arising from extensional deformation during uniaxial drawing and fixed ''in-situ'' through strain-induced crystallization. The average ether-ketone bridge bond angles in form II crystal are determined to be 148.9 degrees by using standard bond lengths. The crystal morphology of PEEKK bears a great similarity to that of PEEK. The crystals grow in the form of spherulites and have the b-axis of unit cell radial. The effects of draw rate on strain-induced crystallization and induction of form II structure are also discussed.

A carbon single crystal electrode for an electrochemical quartz crystal microbalance study

A highly ordered single crystal carbon material, highly oriented pyrolytic graphite (HOPG) has been successfully employed as a working electrode in an electrochemical quartz crystal microbalance study. RTV silicone rubber is selected to adhere the HOPG film onto the quartz crystal surface. Such modified quartz crystal can oscillate with stable frequency. The electrode modified in this way has good electrochemical properties.

The crystal structure and drawing-induced polymorphism in poly(aryl ether ketone)s .1. Poly(oxybiphenyl-4-4'-diyloxy-1,4-phenylenecarbonyl-1,3-phenylenecarbonyl-1,4-phenylene)

Crystal structure and polymorphism induced by uniaxial drawing of a poly(aryl ether ketone) [PEDEKmK] prepared from 1,3-bis(4-fluorobenzoyl)benzene and biphenyl-4,4'-diol have been investigated by means of transmission electron microscopy (TEM), electron diffraction (ED), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC) techniques. The melting and recrystallization process in the temperature range of 250-260 degrees C, far below the next melting temperature (306 degrees C), was identified and found to be responsible for the remarkable changes in lamellar morphology. Based on WAXD and ED patterns, it was found that crystal structure of isotropic-crystalline PEDEKmK obtained under different crystallization conditions (melt-crystallization, cold-crystallization, solvent-induced crystallization, melting-recrystallization, and crystallization from solution) keeps the same mode of packing, i.e., a two-chain orthorhombic unit cell with the dimensions a = 0.784 nm, b = 0.600 nm, and c = 4.745 nm (form I). A second crystal modification (form II) can be induced by uniaxial drawing above the glass transition temperature, and always coexists with form I. This form also possesses an orthorhombic unit cell but with different dimensions, i.e., a = 0.470 nm, b = 1.054 nm, c = 5.064 nm. The 0.32 nm longer c-axis of form II as compared with form I is attributed to an overextended chain conformation due to the expansion of ether and ketone bridge bond angles during uniaxial drawing. The temperature dependence of WAXD patterns for the drawn PEDEKmK suggests that form II can be transformed into the more stable form I by relaxation of overextended chains and relief of internal stress at elevated temperature in absence of external tension.