White electrolumineseence from a single-polymer system with simultaneous two-color emission: Polyfluorene as the blue host and a 2,1,3-benzothiadiazole derivative as the orange dopant on the main chain

New single-polymer electroluminescent systems containing two individual emission species - polyfluorenes as a blue host and 2,1,3-benzothiadiazole derivative units as an orange dopant on the main chain - have been designed and synthesized. The resulting single polymers are found to have highly efficient white electroluminescence with simultaneous blue(lambda(max) = 421 nm/445 nm) and orange emission (lambda(max) = 564 nm)from the corresponding emitting species. The influence of the photoluminescence (PL) efficiencies of both the blue and orange species on the electroluminescence (EL) efficiencies of white polymer light-emitting diodes (PLEDs) based on the single-polymer systems has been investigated. The introduction of the highly efficient 4,7-bis(4-(N-phenyl-N-(4-methylphenyl)amino)phenyl)-2,1,3-benzothiadiazole unit to the main chain of polyfluorene provides significant improvement in EL efficiency. For a single-layer device fabricated in air (indium tin oxide/poly(3,4-ethylenedioxythiophene): poly(styrene sulfonic acid/polymer/Ca/Al), pure-white electroluminescence with Commission Internationale de l'Eclairage (CIE) coordinates of (0.35,0.32), maximum brightness of 12 300 cd m(-2), luminance efficiency of 7.30 cd A(-1), and power efficiency of 3.34 lm W-1 can be obtained.

Characterization and properties of biodegradable poly(hydroxyalkanoates) and 4,4-dihydroxydiphenylpropane blends: Intermolecular hydrogen bonds, miscibility and crystallization

Intermolecular hydrogen bonds, miscibility, crystallization and thermal stability of the blends of biodegradable poly(3-hydroxybutyrate) (PHB), poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(3HB-3HHx)] with 4,4-dihydroxydiphenylpropane (DOH2) were investigated by FTIR, C-13 Solid state NMR, DSC, WAXD and TGA. Intermolecular hydrogen bonds were found in both blend systems, which resulted from the carbonyl groups in the amorphous phase of both polyesters and the hydroxyl groups of DOH2. The intermolecular interaction between P(3HB-3HHx) and DOH2 is weaker than that between PHB and DOH2 owing to the steric hindrance of longer 3HHx side chains. Because of the effect of the hydrogen bonds, the chain mobility of both PHB and P(3HB-3HHx) components was limited after blending with DOH2 molecules. Single glass transition temperature depending on the composition was observed in all blends, indicating that those blends were miscible in the melt. The addition of DOH2 suppressed the crystallization of PHB and P(3HB-3HHx) components. Moreover, the crystallinity of PHB and P(3HB-3HHx) components also decreased with increasing DOH2 content in the blends.

Thermotropic liquid crystallinity, thermal decomposition behavior, and aggregated structure of poly(propylene carbonate)/ethyl cellulose blends

Maleic anhydride end capped poly(propylene carbonate) (PPC-MA) was blended with ethyl cellulose (EC) by casting from dichloromethane solutions. The thermotropic liquid crystallinity, thermal decomposition behavior, and aggregated structure were investigated by differential scanning calorimetry (DSC), thermogravimetry (TGA), and wide angle X-ray diffraction (WAXD). DSC exhibits thermotropic liquid crystallinity in the rich EC composition range. TGA shows that thermal decomposition temperatures were elevated upon interfusing EC into PPC-MA. WAXD corroborates that EC and PPC-MA/EC blend films cast from dilute dichloromethane solution possessed cholesteric liquid crystalline structure in the rich EC composition range, and that dilution of PPC-MA with EC increased the dimension of noncrystalline region, leading to a more ordered packed structure.

Synthesis and characterization of poly(beta-hydroxybutyrate) and poly(epsilon-caprolactone) copolyester by transesterification

To synthesize the copolyester of poly(beta-hydroxybutyrate) (PHB) and poly(epsilon-caprolactone) (PCL), the transesterification of PHB and PCL was carried out in the liquid phase with stannous octoate as the catalyzer. The effects of reaction conditions on the transesterification, including catalyzer concentration, reaction temperature, and reaction time, were investigated. The results showed that both rising reaction temperature and increasing reaction time were advantageous to the transesterification. The sequence distribution, thermal behavior, and thermal stability of the copolyesters were investigated by C-13 NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry, wide-angle X-ray diffraction, optical microscopy, and thermogravimetric analysis. The transesterification of PHB and PCL was confirmed to produce the block copolymers. With an increasing PCL content in the copolyesters, the thermal behavior of the copolyesters changed evidently. However, the introduction of PCL segments into PHB chains did not affect its crystalline structure. Moreover, thermal stability of the copolyesters was little improved in air as compared with that of pure PHB.

Miscibility, crystallization kinetics, and morphology of poly(beta-hydroxybutyrate) and poly(methyl acrylate) blends

The miscibility, spherulite growth kinetics, and morphology of binary blends of poly(beta-hydroxybutyrate) (PHB) and poly(methyl acrylate) (PMA) were studied with differential scanning calorimetry, optical microscopy, and small-angle X-ray scattering (SAXS). As the PMA content increases in the blends, the glass-transition temperature and cold-crystallization temperature increase, but the melting point decreases. The interaction parameter between PHB and PMA, obtained from an analysis of the equilibrium-melting-point depression, is -0.074. The presence of an amorphous PMA component results in a reduction in the rate of spherulite growth of PRE. The radial growth rates of spherulites were analyzed with the Lauritzen-Hoffman model. The spherulites of PHB were volume-filled, indicating the inclusion of PMA within the spherulites. The long period obtained from SAXS increases with increased PMA content, implying that the amorphous PMA is entrapped in the interlamellar region of PHB during the crystallization process of PHB. All the results presented show that PHB and PMA are miscible in the melt. (C) 2000 John Wiley & Sons, Inc.

Study on the properties of poly(beta-hydroxybutyrate) grafted with maleic anhydride

The thermal stability, crystallization behavior and biodegradability of poly(beta -hydroxybutyrate) (PHB) grafted with maleic anhydride (MA) were studied by DSC,TGA, optical microscopy and WAXD. The results showed that thermal stability of maleated PHB was obviously improved, comparing with that of pure PHB. The temperature of decomposition was enhanced about 20 degreesC After grafting MA, the crystallization behavior of PHB changed evidently. The rate of spherulite growth decreased, the crystallization temperature from the melt state reduced, and the cold crystallization temperature from the glass state increased. With the increase in graft degree, the banding texture of spherulite became more distinct and orderly. Moreover, the introduction of MA groups promoted the biodegradation of PHB.

Miscibility and crystallization of poly(beta-hydroxybutyrate) and poly(p-vinylphenol) blends

The miscibility and crystallization behavior of poly(beta-hydroxybutyrate) (PHB) and poly(p-vinylphenol) (PVPh) blends were studied by differential scanning calorimetry and optical microscopy (OM). The blends exhibit a single composition-dependent glass transition temperature, characteristic of miscible systems, A depression of the equilibrium melting temperature of PHB is observed. The interaction parameter values obtained from analysis of the melting point depression are of large negative values, which suggests that PHB and PVPh blends are thermodynamically miscible in the melt. Isothermal crystallization kinetics in the miscible blend system PHB/PVPh was examined by OM. The presence of the amorphous PVPh component results in a reduction in the rate of spherulite growth of PHB. The spherulite growth rate is analyzed using the Lauritzen-Hoffman model, The isothermally crystallized blends of PHB/PVPh were examined by wide-angle X-ray diffraction and smell-angle X-ray scattering (SAXS). The long period obtained from SAXS increases with the increase in PVPh component, which implies that the amorphous PVPh is squeezed into the interlamallar region of PHB.

The Heterogeneous Growth of P(3MeTh)--An Ellipsometric Study

Successive thicker P(3MeTh) layers are analysed by ex situ conventional and imaging ellipsometry. Thin films display a smooth surface, are compact and homogeneous while for a growth charge above 20 mC cm(-2) the polymer structure modifies to a still uniform but less dense layer. A two-layer model is used and a mathematical procedure is developed to obtain, simultaneously, from the experimental ellipsometric parameters, Delta and Psi, the thickness and the complex refractive index of P(3MeTh) films grown up to 80 mC cm(-2). Thicker polymer layers are disordered and present a high degree of surface roughness. 

植物生产生物可降解塑料PHB的研究：真养产碱杆菌H16的phbB和phbC的基因克隆、植物表达载体构建和转基因马铃薯植株的获得

利用聚合酶链式反应(PCR)技术从Alcaligenes eutrophus H16染色体DNA中扩增并克隆了调控聚-3-羟基丁酸(poly-3-hydroxy-butyrate，PHB)生物合成的两个关键酶基因：依赖NADPH的乙酰乙酰CoA还原酶基因(phbB)和PHB合成酶基因(phbC)。限制性内切酶图谱和核苷酸序列分析证实了克隆结果，并表明克隆的基因与国外所报道的有很高的同源性。经过基因拼接，构建了块茎特异性表达的高等植物表达载体pPSAGB（嵌合phbB）、pBIBGC(嵌合phbC)和pPSAGCB（嵌合phbB和phbC）。并以试管薯(microtuber)为外植体经Agrobacterium介导转化了虎头、京丰、Bintje、Favorita、高原4号和88-5共6个马铃薯品种，获得49个株系。经PCR检测导入phbB的株系共有44个，对其中30个株系进行DNA dot blot分析，结果表明phbC导入呈阳性的株系有20个。深入的鉴定工作还在进行中。

转基因植物生产生物可降解塑料PHB的研究-phbA功能鉴定、多价表达载体的构建及转基因植物的获得

聚-β-羟基链烷酸（PHA）是许多微生物作为碳源、能源的一类贮藏性聚酯，具有广泛的应用价值。该聚酯可被微生物完全降解且有与塑料相似的性质，因而研究并提高PHA在植物中的合成为解决环境污染提供了新的解决途径。 聚-β-羟基于酸酯（PHB）是研究的最早、研究的最清楚的一种PHA。用聚合酶链式反应扩增并克隆了真养产碱杆菌（Alcaligenes eutrophus）中合成PHB的一个关键酶——3-酮硫裂解酶基因phbA。DNA序列分析表明所克隆的基因与国外报道序列同源性很高，只有一个碱基对的区别。为了检测该基因的功能及导肽的定位效率，构建了带有导肽基因的组成型表达载体，由根癌农杆菌介导转化烟草（Nicotiana tabacum cv. Wisconsin 38）得到转基因植株。蛋白质电泳结果表明导肽可以将外源蛋白定位于质体，phbA基因能翻译成相应大小的蛋白。酶活性分析证实了转基因烟草中phbA编码的3-酮硫裂解酶可以催化乙酰-CoA合成乙酰乙酰-CoA。 将携有导肽序列的phbC（编码PHB合酶）和phbB（编码乙酰乙酰-CoA还原酶）连入pBIB-HYG得到组成型表达载体pZCB，用冻融法转入根癌农杆菌，介导转化烟草。烟草为已获得的具有卡那霉素抗性整合并表达phbA的转基因烟草。通过二次转化将携有潮霉素抗性的phbB基因和phbC基因导入已整合phbA的烟草，各基因均由质体导肽控制，最后得到整合PHB合成的三个酶基因的转基因烟草。转基因烟草经PCR、PCR-Southern检测，初步确定整合phbB和phbC烟草植株。以气相色谱初步分析，转基因烟草中PHB的含量可达鲜重的0.233%。 结果表明phbB和phbC基因可以在真核表达系统中编码相应的蛋白。通过色素分析、荧光动力学等手段分析了PHB在叶绿体中的累积对其功能的影响。 为了提高底物乙酰-CoA的供应能力及减少惰性聚酯对植物体的伤害，分离了种子特异性启动子和质体导肽序列，利用忆经克隆的合成PHB的三个关键酶基因，通过一系列DNA重组，分别构建了含有种子特异性启动子的嵌合phbC、phbB的二价表达载体pSCB及嵌合phbC、phbA、phbB的三价表达载体pSCAB，并由导肽将基因表达产物定位于质体。经根癌农杆菌介导转化油菜（Brassica napus L.) H165，获得转基因油菜植株，并进行了PCR、Southern blot及RT-PCR-DNA杂交等分检测。结果表明，三基因已经分别整合到相应的转基因油菜中，并已在转录水平表达。同时转化了油菜不育系、恢复系和保持系，获得批量转化株，并移入温室栽培。

利用转基因植物生产生物可降解塑料(PHB)的研究

聚 3 一控基丁酸酯 (Poly – 3 - hydroxybutyrate,PHB) 及其它类型的聚 3-泾基链烷酸醋同属于聚酯类物质 , 是自然界中多种细菌的碳源及能源储备物。这种聚酯的物理化学特性与传统塑料相似 , 并具有生物可降解性 , 如能取代化学合成塑料将减少环境中的塑料废弃物 , 从源头治理 " 白色污染 " 问题。微生物发酵法生产的 PHB 价格过高 , 无法在市场上与化学合成塑料竞争。随着分子生物学的发展 , 人们逐渐将视线转向植物生物反应器。转基因植物能够利用二氧化碳为碳源、太阳能为能源合成目的产物 , 大大降低生产成本 , 为生产具有市场 竞争力的新型生物可降解塑料提供可行途径。在此领域虽然己取得一定进展 , 但远未达到商业化生产水平。大规模商业化生产要求转基因植物能够在确保环 境安全性的前提下高效、稳定地生产 PHB 。本文尝试改善植物中 PHB 的生产体系 ,为环保型塑料早日进入市场作出努力。 1. 由于表达框架中多次使用同一启动子会导致基因沉默 , 本文克隆了另一 种子特异性启动子 nap300, 以替换重复使用的7S启动子,减轻“共抑制”。将 nap300 与 GUS 基因相连进行功能鉴定。荧光检测和组织化学染色的结果都证明此仅 30Obp 的 DNA 序列足以调控基因进行种子特异性表达。尽管 B 盒作为 高度保守区在种子特异性表达中起重要作用 , 位于此处的两个碱基替代型突变 并未使 nap300 的活性明显降低 , 对启动子的时空表达模式也无明显影响。将 nap300 、 7S 分别与 phbA 基因 ( 编码 3-酮硫裂解酶) 相连 , 在相似表达环境中 对二者功能进行比较 , 发现两个启动子表达模式基本相同并在同一时期达到活 性高峰 , 因此 nap300 可用于改善 PHB 合成基因在植物体内的表达调控。通过 对种子特异性启动子的比较可加深对其表达模式的了解 , 为植物基因工程中的 精细调控提供依据。 2. 叶绿体基因工程是随着植物遗传转化技术发展刚刚兴起的生物技术 , 具 有超量表达外源基因 , 为原核基因提供适宜表达环境 , 消除 “位置效应”和基因沉默 , 环境安全性好等优点 , 较更适合用于植物生物反应器方面的研究。本研究在国内率先探讨将叶绿体转化技术引入植物生产生物可降解塑料这一领域 的可行性 ( 国外仅有日本一例 ), 构建了叶绿体转化及表达载体 pTRV-PHB, 通过基因枪法将 PHB 合成相关基因导入烟草叶绿体基因组。转基因烟草顺利达到同质化，其形态和生长发育均无异常。 Northern 点杂交检测表明与 PHB 合成相关的三个基因均能在转录水平表达 , 未出现核转化中经常发生的“基因沉默”现象。通过 RT-PCR 进一步检测表明叶绿体型转基因烟草中目的基因的表达水平明显比核转化植株中相应基因的表达水平高。气相色谱分析确证转基因植株具有合成 PHB 的能力。这些都表明叶绿体转化适合用于转基因植物生产 PHB的研究。虽然叶绿体型转基因烟草中产物含量偏低 , 并未达到预期结果 , 但经进一步改进与完善 , 终将会成功地用于生产高附加值产品的植物基因工程中。 3. 为初步探讨叶绿体转化中在同源重组反应介导下整合外源基因的机理 , 从油菜叶绿体基因组中分离两段序列作为同源片段 , 基因枪法转化烟草 , 结果显示即使供体所含同源片段与受体叶绿体基因组相应区域差异高达 10%, 转化效率也无降低。这一现象的发现有助于促进“通用载体”　的改进 , 扩展叶绿体转化受体范围乃至达到商业化应用水平。 4. 成功地通过二次转化获得整合并表达多基因的转基因烟草 , 缩短了研究周期 , 对相关转基因植物的研究有一定参考价值。本文还优化了油菜转化体系 , 使转基因油菜同时整合三个 PHB 合成相关基因的效率由 7.69% 增加至 16.0% 。 田间试验与产物分析正在进行中。

Expression and molecular analysis of phbB gene in Chlamydomonas reinhardtii

The expression vector containing phbB and ble genes was constructed and transformed into cell-wall-deficient strain Chlamydomonas reinhardtii CC-849 by the glass-head method. The transgenic alga was selected and maintained in the TAP agar plates containing 10 mug/mL Zeomycin. Transgenic alga, which could express phbB at the transcriptional level, was obtained and further confirmed with PCR, Southern blot and RT-PCR-DNA hybridization analysis.

Fabrication of ZnO and its enhancement of charge injection and transport in hybrid organic/inorganic light emitting devices

ZnO nanocrystals were synthesized by hydrolysis in methanol. X-ray diffraction and photoluminescence spectra confirm that good crystallized ZnO nanoparticles were formed. Utilizing those ZnO nanoparticles and poly [2- methoxy-5 - (3',7'-dimethyloctyloxy)- 1,4-phenylenevinylene] (MDMO-PPV), light emitting devices with indium tin oxide (ITO)/poly(3,4-oxyethyleneoxy-thiophene):poly(styrene sulfonate) (PEDOT:PSS)/ ZnO:MDMO-PPV/Al and ITO/PEDOT:PSS/MDMO-PPV/Al structures were fabricated. Electrolummescence (EL) spectra reveal that EL yield of hybrid MDMO-PPV and ZnO nanocrystals devices increased greatly as compared with pristine MDMO-PPV devices. The current-voltage characteristics indicate that addition of ZnO nanocrystals can facilitate electrical injection and charge transport. The decreased energy barrier to electron injection is responsible for the increased efficiency of electron injection. (c) 2007 Elsevier B.V. All rights reserved.

Phase transition behavior and molecular orientation of oligo(9,9 '-dioctylfluorene-alt-bithiophene)

A novel conjugated oligomer, oligo(9,9'-dioctylfluorene-alt-bithiophene) (OF8T2), was found to exhibit a unique phase transition between crystalline and liquid-crystalline states, and a liquid-crystalline glass was easily generated, offering better TFT device performance. In thin films, upon annealing the OF8T2 molecules oriented preferentially with their planes of conjugation being normal to the substrate, and both film thickness and annealing temperature were critical to the film morphology and the molecular orientation. When the OF8T2 film was deposited on a rubbed polyimide surface and annealed, the molecules aligned their long axes along the rubbing direction.

The effect of annealing treatment on performance of interdiffused organic photovoltaic devices

We fabricated the interdiffused organic photovoltaic devices, which composed of poly (2-methoxy-5-(2'-ethylhexyloxy)-1, 4-phenylenevinylene) (MEH-PPV) and buckminsterfullerene (C-60), by annealing treatment. After annealing, C60 diffused into the MEH-PPV layer, in consequence, MEH-PPV/C-60 interfacial area was increased and their interface became closer proximity. The results lead to reduce reverse-bias saturation current (J(s)), and increase the open-circuit voltage (V-OC) and the short-circuit current (J(SC)).