In situ synthesis of terbium-benzoic acid complex in sol-gel derived silica by a two-step sol-gel method

Terbium complexes with benzoic acid and its derivatives o-hydroxybenzoic acid and p-hydroxybenzoic acid were in situ synthesized in sol-gel derived silica matrix via a two-step sol-gel process. The formation process of the complex was characterized by fluorescence spectra, absorption spectra and IR spectra. The gels that contain in situ synthesized complexes exhibit the characteristic emission bands of terbium ion. The fluorescence lifetimes of Tb3+ in the silica gels are longer than those in the pure complexes and in the solutions that contain the corresponding complexes. (C) 2000 Elsevier Science Ltd. All rights reserved.

Construction of a heteropolyanion-modified electrode by a two-step sol-gel method and its electro catalytic applications

The sol-gel technique was used here to construct heteropolyanion-containing modified electrodes. This involves two steps, i.e. the first forming a functionalized sol-gel thin film on the surface of the glassy carbon electrode and then immersing the electrode into a heteropolyanion solution to incorporate the heteropolyanion into the sol-gel film. Here a Dawson-type heteropolyanion, K6P2W18O62 (P2W18), was used as a representative to illuminate the behavior of the as-prepared composite film. The electrochemical performance of the P2W18-modified electrode was studied with respect to the pH effect and long-term stability. The modified electrode exhibited a high electrocatalytic response for the reduction of BrO3- and NO2-. Steady-state amperometry was applied to characterize the electrode as an amperometric sensor for the determination of NO2-. The sensor had a linear range from 0.02 to 34 mM and a detection limit of 5 x 10(-6) M. (C) 2001 Elsevier Science B.V. All rights reserved.

Preparation and luminescence properties of terbium-Sal complex in-situ synthesized in silica matrix by a two-step sol-gel process

In-situ synthesis of terbium complex with salicylic acid (Sal) in silica matrix was made by a two-step sol-gel process. The terbium complex with salicylic acid was formed in sol-gel derived silica gel, and confirmed by the luminescence excitation spectra and infrared(IR) spectra. As compared to the pure terbium complex powder, the silica gel containing terbium complex exhibits its characteristic emission and presents a longer fluorescence lifetime than that for the pure complex. The luminescence properties of the complex containing;silica gel were investigated and compared with that of both terbium doped the silica gel and thp pure complex powder. The reasons leading to the above results were also discussed.

Luminescence characteristics of europium and terbium complexes with 1,10-phenanthroline in-situ synthesized in a silica matrix by a two-step sol-gel process

In-situ synthesis of europium and terbium complexes with 1,10-phenanthroline (phen) in silica matrix by a two-step sol-gel process has been proposed. The formation of europium and terbium complexes with phen in sol-gel derived silica gel were confirmed by the luminescence excitation spectra. The silica gels that contain in-situ synthesized europium and terbium complex exhibit the characteristic emission bands of the rare earth ions. Furthermore. the rare earth ions present longer fluorescence lifetimes than the comparable pure complex powder and the complexes dissolved in ethanol solutions. The luminescence properties of the silica gels codoped with europium (or terbium) and phen were also investigated with respect to the gels doped with europium (or terbium). (C) 1999 Elsevier Science B.V. All rights reserved.

爆轰波在楔面上反射数值分析

应用基元反应模型和频散可控耗散格式(DCD)对氢氧爆轰波在楔面反射进行了数值模拟.计算中氢氧混合物的化学反应采用了8种组分20个反应方程式.在处理化学反应引起的刚性问题时采用了时间算子分裂的方法.模拟了爆轰波在楔面反射由马赫反射向规则反射转变的过程,得到了反射转变临界角,同时考虑了初始压力和组分的影响,并和实验及理论分析结果进行了比较,结果是令人满意的.

爆轰波在弯管内传播过程数值分析

应用基元反应模型和频散可控耗散格式(DCD)对氢氧爆轰波在弯管内的传播过程进行了数值模拟.计算中氢氧混合物化学反应采用了8种组分20个反应方程式.在处理化学反应引起的刚性问题时采用了时间算子分裂的方法.计算结果表明,在弯管小曲率半径壁面附近,由于膨胀稀疏作用,爆轰波强度减弱,在局部出现前导激波与放热反应区的解藕以及二次起爆现象;在弯管大曲率半径壁面上爆轰波在马赫反射和正规反射之间相互转变,使爆轰波加强.弯管内的爆轰现象与弯管曲率半径有关.

气相爆轰波基元反应模型数值模拟

应用频散可控格式和基元反应模型计算了氢气-氧气和氢气-空气混合物的爆轰波一维结构，并对爆轰波在二维轴对称突扩截面管内的传播过程进行了数值模拟。采用算子分裂的方法来处理化学反应的刚性问题。计算结果表明，频散可控格式可以精确捕捉爆轰波及其反射过程。爆轰波在突扩截面处绕射，由于稀疏波的作用而引起局部熄爆现象。数值结果还反应出，在一定条件下，熄爆区域可以二次起爆，而且二次起爆过程与可燃混合气体的敏感度有关，对于敏感度高的可燃气体，由于爆轰波具有较强的自持能力，其波阵面在绕射过程中所产生的局部熄爆区后会自动再次起爆

气相爆轰基元反应模型数值模拟

采用基元反应模型和高精度的ENO格式对气相爆轰进行数值研究，对H2／O2／Ar混合气体起爆和爆轰波传播过程的数值模拟结果表明，计算的爆轰波阵面参数和实验相当符合。数值研究的结果还表明，爆轰波反应区中参与反应的不同组分具有不同类型的变化特征。计算结果的精度随着网格尺寸增加而增加，并能保持较好的收敛性。

氢氧混合气体爆轰波的真实化学反应模型数值模拟

采用高精度的ENO格式和基于基元化学反应的真实化学反应模型求解氢氧混合气体一维爆轰波的精细结构。采用直接起爆方法得到稳定传播的爆轰波，计算的爆轰波阵面参数和实验相当符合。对爆轰波反应区化学反应的研究表明，参与反应的不同组分具有不同类型的变化特征。网格尺寸影响的研究表明，计算结果的精度随着网格尺寸的增加而增加，并能保持较好的收敛性。移动网格研究结果表明，网格运动速度和爆轰速度接近时，两者的相互作用对计算结果产生一定影响。

Experimental observation of resonant modes in GaInAsP microsquare resonators

GaInAsP-InP microsquare resonators with InP pedestals are fabricated by two-step chemical etching, and obvious mode peaks are observed in the photoluminescence spectra of the resonators. The mode Q-factors about 500 are obtained for a microsquare resonator with the side length of 7 mu m. The experimental mode interval is in agreement with that predicted by the light ray method based on the cavity length, instead of that of the whispering-gallery (WG)-like modes, which has mode interval twice of that determined by the cavity length. The finite-difference time-domain simulation shows that a little asymmetry may greatly reduce the difference of the Q-factors between the WG-like modes and the other modes.

Mass transfer kinetics of yttriium(III) using a constant interfacial cell with laminar flow. Part I. Extraction with Cyanex 302

The interfacial tension is measured for Cyanex 302 in heptane and adsorption parameters are calculated according to Gibbs equation and Szyskowski isotherm. The results indicate that Cyanex 302 has a high interfacial activity, allowing easy extraction reaction to take place at the liquid-liquid interface. The extraction kinetics of yttrium(III) with Cyanex 302 in heptane are investigated by a constant interfacial cell with laminar flow. The effects of stirring rate, temperature and specific interfacial area on the extraction rate are discussed. The results suggest that the extraction kinetics is a mixed regime with film diffusion and an aqueous one-step chemical reaction proposed to be the rate-controlling step. Assuming the mass transfer process can be formally treated as a pseudo-first-order reversible reaction with respect to the metal cation, the rate equation for the extraction reaction of yttrium(III) with Cyanex 302 at pH <5 is obtained as follows:R-f = 10(-7.85)[Y(OH)(2)(+)]((a))[H(2)A(2)]((o))(1.00)[H+]((a))(-1.00)Diffusion parameters and rate constants are calculated through approximate solutions of the flux equation.