Thermal and mechanical properties of poly(butylene terephthalate)/epoxy blends

In this study, melt blends of poly(butylene terephthalate) (PBT) with epoxy resin were characterized by dynamic mechanical analysis, differential scanning calorimetry, tensile testing, Fourier transform infrared spectroscopy, and wide-angle X-ray diffraction. The results indicate that the presence of epoxy resin influenced either the mechanical properties of the PBT/epoxy blends or the crystallization of PBT. The epoxy resin was completely miscible with the PBT matrix. This was beneficial to the improvement of the impact performance of the PBT/epoxy blends.

Effect of nucleating agent on the isothermal crystallization kinetics of PHBV

The crystallization behavior of PHBV, poly(beta -hydroxybutyrate-co-beta -hydrxyvalerate), with nucleating agents under isothermal conditions was investigated. A differential scanning calorimeter was used to monitor the crystallization process from the melt. During isothermal crystallization, the dependence of relative degree of crystallinity on time was described by the Avrami equation. It has been shown that the addition of BN and Tale causes a considerable increase in the overall crystallization rate of PHBV but does not influence the Avrami exponent n, mechanism of nucleation and spherulite growth mode of PHBV. A little of nucleating agent will increase the crystallization rate and decrease the fold surface free energy sigma (e), remarkably. The effect of BN is more significant than that of Talc.

可生物降解脂肪族聚酯的反应接枝与相形态

聚（β-轻基丁酸醋-co-β-经基戊酸酷）（PHBV）是一种生物降解脂肪族聚酷，其结晶成核密度低，结晶速度比较慢且易生成大尺寸的球晶。以球晶中心向外扩展形成许多圆环状的开裂以及沿球晶生长方向形成许多劈裂，从而导致了PHBV呈脆性断裂。只要能有效地降低其结晶度，减小球晶尺寸，就可以达到增韧的目的。通过PHBV与二氧化碳一环氧丙烷共聚物（PPC）反应接枝来调控PHBV的结构和相形态，具有实际的理论意义和应用前景。开展了PPC的封端和与PHBv的接枝反应。首次提出了甲基丙烯酸缩水甘油醋（GMA）与PHBV及PPC与PHBV－GMA的接枝反应机理。确信PHBV接枝GMA的接枝点发生在PHBV骨架上的季碳原子上，反应过程中没有交联反应和降解反应的发生。发现PHBv-g-Gh1A共聚物上环氧基能与封端的PPc上的梭基熔融反应原位生成了PHBv-g-PPC共聚物。在机械共混物中两大分子之间的接枝和醋交换反应几乎不发生。GMA的引入阻止了PHBV的降解行为，从而改善了PHBV的加工性能。成功地调控了PHBVPC结构及相形态。证实了PHBV与PPC在反应共混过程中的接枝反应。加入PPC阻碍了PHBV的结晶，这在反应体系中更加明显。通过控制反应条件和反应物的组成，可以使非反应共混物中PHBV球晶变得不规则，发生扭曲变形，球晶尺寸降低；而在反应共混物中，可以使其球晶已很难辨认。SEM结果表明在PHBV用PC（30／70）和PHBV用PC（70／30）共混物中发生了相转变。尤其在反应共混物中淬断面表现为塑性。力学性能随共混组成而发生较大幅度的改变。发现通过改变组成及对反应共混相结构的控制，PHBV共混物的断裂伸长率可变化1一2个数量级，从而实现了制得一系列从脆性断裂塑料到高韧性弹性体的高分子材料。研究了反应接枝共混体系的熔融、结晶行为、等温和非等温结晶动力学。发现加入的GMA对PHBV有成核作用。引入的PPC阻碍了PHBV的结晶，降低PHBV的结晶度，球晶径向生长速率，平衡熔点和结晶能力。结晶速率与冷却速率有较大的依赖性。修正的Avrami方程能很好地描述PHBv和PHBv爪PC共混物非等温结晶过程。对动态力学性能的分析发现，反应共混物相比于非反应共混物聚合物玻璃化温度都有不同程度的内移，说明两组分间相容性增加，接枝共聚物具有良好的增容效果，显著地改善了两相界面性能。PHBV可以部分进入PPC相区，使共混物分子运动特征发生改变。发现在熔体加工条件下，PHBV与PPC之间很难发生酷交换反应，但是以辛酸亚锡为催化剂，氯苯为溶剂，在120℃条件下，两者可以发生醋交换反应。在聚己内醋（PCL）用PC熔融共混过程中GMA可以有效地抑制过氧化二异丙苯（DCP）所引起的PCL交联反应。在DCP和OMA存在下得到的样品之球晶具有十字消光现象，球晶规整度增大。同在溶液中醋交换催化剂存在下PPC和PCL发生了酷交换反应后所形成的球晶相结构相类似，而PCL／PPCOCP体系所形成的球晶中含有大量的非晶相区。从而，确信了GMA在脂肪族聚醋，脂肪族聚碳酸醋等生物降解高分子反应共混体系中的双重作用：一是引入具有高反应活性的官能团；二是减少在过氧化物作用下PHBV类高分子的降解及PCL类高分子的交联反应。PCL共混组分可以提高PPC相区的稳定性。提高反应时间或催化剂浓度同样能够改善热稳定性。

A facile approach to biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol)-based polyurethanes containing pendant amino groups

A novel biodegradable poly(epsilon-caprolactone)-poly(ethylene glycol)-based polyurethanes (PCL-PEG-PU) with pendant amino groups was synthesized by direct coupling of PEG ester of NH2-protected-(aspartic acid) (PEG-Asp-PEG diols) and poly(epsilon-caprolactone) (PCL) diols with hexamethylene dissocyanate (HDI) under mild reaction conditions and by subsequent deprotection of benzyloxycarbonyl (Cbz) groups. GPC, H-1 NMR, and C-13 NMR studies confirmed the polymer structures and the complete deprotection. DSC and WXRD results indicated that the crystallinity of the copolymer was enhanced with increasing PCL diols in the copolymer. The content of amino group in the polymer could be adjusted by changing the molar ratio of PEG-Asp-PEG diols to PCL diols. Thus the results of this study provide a good way to prepare polyurethanes bearing hydrophilic PEG segments and reactive amino groups without complicated synthesis.

Miscibility and crystallization of PHB PMA blends

The miscibility, crystallization behavior and morphological structure of PHB/PMA blends have been studied by the differential scanning calorimeter (DSC) and polarized optical microscopy (POM). The chemical repeat units of the two components of the blend are isomers. The results indicate that PHB and PMA are miscible in the melt. The addition of PMA into PHB results in a depression in the spherulite growth rate of PHB. With increasing PMA content in the blends, the texture of PHB spherulite becomes more open.

Synthesis and characterization of novel biodegradable poly(carbonate ester)s with photolabile protecting groups

Novel biodegradable poly(carbonate ester)s with photolabile protecting groups were synthesized by ring-opening copolymerization Of L-lactide (LA) with 5-methyl-5-(2-nitro-benzoxycarbonyl)-1,3-dioxan-2-one (MNC) with diethyl zinc (Et2Zn) as catalyst. The poly(L-lactide-co-5-methyl-5-carboxyl-1,3-dioxan-2-one) (P(LA-co-MCC)) was obtained by UV irradiation Of poly(L-lactide acid-co-5-methyl-5-(2-nitro-benzoxycarbonyl)-1,3-dioxan-2-one) (P(LA-co-MNC)) to remove the protective 2-nitrobenzyl group.

Self-assembly of a polymer pair through poly(lactide) stereocomplexation

A polymer pair composed of poly( N-isopropylacrylamide-co-2-hydroxyethyl methacrylate terminated oligo( L-lactide)) ( poly( NIPAAm-co-HEMAOLLA)) graft random copolymer and poly( D-lactide) ( PDLA) homopolymer was self-assembled into micelles with a diameter around 100 nm through the stereocomplexation between the OLLA branches of the graft copolymer and the PDLA homopolymer. The specific intermolecular stereocomplexation was considered as the powerful ordered aggregation force in the micelle cores. The shell's component of poly( NIPAAm-co-HEMA) and its thermosensitivity were proved by H-1 nuclear magnetic resonance ( NMR) and dynamic light scattering ( DLS), respectively. The incorporation of PDLA homopolymer into the graft copolymer affected the micelle size and the critical micelle concentration ( CMC). The incorporation of even a small quantity ( 11 wt%) of PDLA into the graft copolymer micelles resulted in a great decrease of the micelle size. For the graft copolymer with low per cent grafting of 18%, the size of the corresponding micelles decreased slightly even if the PDLA content increased up to 33 wt%. For the graft copolymer with high per cent grafting of 58%, with the further increase of PDLA content, the size of the corresponding micelles at first decreased further and then began to increase. The molecular weight of the PDLA did not significantly affect the micelle size.

Synthesis and characterization of novel poly(ester carbonate)s based on pentaerythritol

Novel poly(ester carbonate)s were synthesized by the ring-opening polymerization Of L-lactide and functionalized carbonate monomer 9-phenyl-2,4,8,10-tetraoxaspiro[5,5]undecan-3-one derived from pentaerythritol with diethyl zinc as an initiator. H-1 NMR analysis revealed that the carbonate content in the copolymer was almost equal to that in the feed. DSC results indicated that T-g of the copolymer increased with increasing carbonate content in the copolymer. Moreover, the protecting benzylidene groups in the copolymer poly(L-lactide-co-9-phenyl-2,4,8,10-tetraoxaspiro[5,5]undecan-3-one) were removed by hydrogenation with palladium hydroxide on activated charcoal as a catalyst to give a functional copolymer, poly(L-lactide-co-2,2-dihydroxylmethyl-propylene carbonate), containing pendant primary hydroxyl groups. Complete deprotection was confirmed by H-1 NMR and FTIR spectroscopy. The in vitro degradation rate of the deprotected copolymers was faster than that of the protected copolymers in the presence of proteinase K. The cell morphology and viability on a copolymer film evaluated with ECV-304 cells showed that poly(ester carbonate)s derived from pentaerythritol are good biocompatible materials suitable for biomedical applications.

Thermotropic liquid crystallinity, thermal decomposition behavior, and aggregated structure of poly(propylene carbonate)/ethyl cellulose blends

Maleic anhydride end capped poly(propylene carbonate) (PPC-MA) was blended with ethyl cellulose (EC) by casting from dichloromethane solutions. The thermotropic liquid crystallinity, thermal decomposition behavior, and aggregated structure were investigated by differential scanning calorimetry (DSC), thermogravimetry (TGA), and wide angle X-ray diffraction (WAXD). DSC exhibits thermotropic liquid crystallinity in the rich EC composition range. TGA shows that thermal decomposition temperatures were elevated upon interfusing EC into PPC-MA. WAXD corroborates that EC and PPC-MA/EC blend films cast from dilute dichloromethane solution possessed cholesteric liquid crystalline structure in the rich EC composition range, and that dilution of PPC-MA with EC increased the dimension of noncrystalline region, leading to a more ordered packed structure.

Sodium sulfonate-functionalized poly(ether ether ketone)s

A new monomer, sodium 5,5'-carbonylbis(2-fluorobenzenesulfonate) (1), was synthesized by sulfonation of 4,4'-difluorobenzophenone (2) with fuming sulfuric acid. Poly(ether ether ketone)s containing sodium sulfonate groups were synthesized directly via aromatic nucleophilic substitution from the sodium sulfonate-functionalized monomer 1 and Bisphenol A (3) in the presence of potassium carbonate in dimethyl sulfoxide. The polycondensation proceeds without any side reactions. The differential scanning calorimetry measurement indicated that the polymers are amorphous and the glass transition temperatures increase with the content of sodium sulfonate groups in the polymer chain. The degree of substitution with sodium sulfonate groups has strong influence on their thermal stability and solubility.

转基因植物生产生物可降解塑料PHB的研究-phbA功能鉴定、多价表达载体的构建及转基因植物的获得

聚-β-羟基链烷酸（PHA）是许多微生物作为碳源、能源的一类贮藏性聚酯，具有广泛的应用价值。该聚酯可被微生物完全降解且有与塑料相似的性质，因而研究并提高PHA在植物中的合成为解决环境污染提供了新的解决途径。 聚-β-羟基于酸酯（PHB）是研究的最早、研究的最清楚的一种PHA。用聚合酶链式反应扩增并克隆了真养产碱杆菌（Alcaligenes eutrophus）中合成PHB的一个关键酶——3-酮硫裂解酶基因phbA。DNA序列分析表明所克隆的基因与国外报道序列同源性很高，只有一个碱基对的区别。为了检测该基因的功能及导肽的定位效率，构建了带有导肽基因的组成型表达载体，由根癌农杆菌介导转化烟草（Nicotiana tabacum cv. Wisconsin 38）得到转基因植株。蛋白质电泳结果表明导肽可以将外源蛋白定位于质体，phbA基因能翻译成相应大小的蛋白。酶活性分析证实了转基因烟草中phbA编码的3-酮硫裂解酶可以催化乙酰-CoA合成乙酰乙酰-CoA。 将携有导肽序列的phbC（编码PHB合酶）和phbB（编码乙酰乙酰-CoA还原酶）连入pBIB-HYG得到组成型表达载体pZCB，用冻融法转入根癌农杆菌，介导转化烟草。烟草为已获得的具有卡那霉素抗性整合并表达phbA的转基因烟草。通过二次转化将携有潮霉素抗性的phbB基因和phbC基因导入已整合phbA的烟草，各基因均由质体导肽控制，最后得到整合PHB合成的三个酶基因的转基因烟草。转基因烟草经PCR、PCR-Southern检测，初步确定整合phbB和phbC烟草植株。以气相色谱初步分析，转基因烟草中PHB的含量可达鲜重的0.233%。 结果表明phbB和phbC基因可以在真核表达系统中编码相应的蛋白。通过色素分析、荧光动力学等手段分析了PHB在叶绿体中的累积对其功能的影响。 为了提高底物乙酰-CoA的供应能力及减少惰性聚酯对植物体的伤害，分离了种子特异性启动子和质体导肽序列，利用忆经克隆的合成PHB的三个关键酶基因，通过一系列DNA重组，分别构建了含有种子特异性启动子的嵌合phbC、phbB的二价表达载体pSCB及嵌合phbC、phbA、phbB的三价表达载体pSCAB，并由导肽将基因表达产物定位于质体。经根癌农杆菌介导转化油菜（Brassica napus L.) H165，获得转基因油菜植株，并进行了PCR、Southern blot及RT-PCR-DNA杂交等分检测。结果表明，三基因已经分别整合到相应的转基因油菜中，并已在转录水平表达。同时转化了油菜不育系、恢复系和保持系，获得批量转化株，并移入温室栽培。

利用转基因植物生产生物可降解塑料(PHB)的研究

聚 3 一控基丁酸酯 (Poly – 3 - hydroxybutyrate,PHB) 及其它类型的聚 3-泾基链烷酸醋同属于聚酯类物质 , 是自然界中多种细菌的碳源及能源储备物。这种聚酯的物理化学特性与传统塑料相似 , 并具有生物可降解性 , 如能取代化学合成塑料将减少环境中的塑料废弃物 , 从源头治理 " 白色污染 " 问题。微生物发酵法生产的 PHB 价格过高 , 无法在市场上与化学合成塑料竞争。随着分子生物学的发展 , 人们逐渐将视线转向植物生物反应器。转基因植物能够利用二氧化碳为碳源、太阳能为能源合成目的产物 , 大大降低生产成本 , 为生产具有市场 竞争力的新型生物可降解塑料提供可行途径。在此领域虽然己取得一定进展 , 但远未达到商业化生产水平。大规模商业化生产要求转基因植物能够在确保环 境安全性的前提下高效、稳定地生产 PHB 。本文尝试改善植物中 PHB 的生产体系 ,为环保型塑料早日进入市场作出努力。 1. 由于表达框架中多次使用同一启动子会导致基因沉默 , 本文克隆了另一 种子特异性启动子 nap300, 以替换重复使用的7S启动子,减轻“共抑制”。将 nap300 与 GUS 基因相连进行功能鉴定。荧光检测和组织化学染色的结果都证明此仅 30Obp 的 DNA 序列足以调控基因进行种子特异性表达。尽管 B 盒作为 高度保守区在种子特异性表达中起重要作用 , 位于此处的两个碱基替代型突变 并未使 nap300 的活性明显降低 , 对启动子的时空表达模式也无明显影响。将 nap300 、 7S 分别与 phbA 基因 ( 编码 3-酮硫裂解酶) 相连 , 在相似表达环境中 对二者功能进行比较 , 发现两个启动子表达模式基本相同并在同一时期达到活 性高峰 , 因此 nap300 可用于改善 PHB 合成基因在植物体内的表达调控。通过 对种子特异性启动子的比较可加深对其表达模式的了解 , 为植物基因工程中的 精细调控提供依据。 2. 叶绿体基因工程是随着植物遗传转化技术发展刚刚兴起的生物技术 , 具 有超量表达外源基因 , 为原核基因提供适宜表达环境 , 消除 “位置效应”和基因沉默 , 环境安全性好等优点 , 较更适合用于植物生物反应器方面的研究。本研究在国内率先探讨将叶绿体转化技术引入植物生产生物可降解塑料这一领域 的可行性 ( 国外仅有日本一例 ), 构建了叶绿体转化及表达载体 pTRV-PHB, 通过基因枪法将 PHB 合成相关基因导入烟草叶绿体基因组。转基因烟草顺利达到同质化，其形态和生长发育均无异常。 Northern 点杂交检测表明与 PHB 合成相关的三个基因均能在转录水平表达 , 未出现核转化中经常发生的“基因沉默”现象。通过 RT-PCR 进一步检测表明叶绿体型转基因烟草中目的基因的表达水平明显比核转化植株中相应基因的表达水平高。气相色谱分析确证转基因植株具有合成 PHB 的能力。这些都表明叶绿体转化适合用于转基因植物生产 PHB的研究。虽然叶绿体型转基因烟草中产物含量偏低 , 并未达到预期结果 , 但经进一步改进与完善 , 终将会成功地用于生产高附加值产品的植物基因工程中。 3. 为初步探讨叶绿体转化中在同源重组反应介导下整合外源基因的机理 , 从油菜叶绿体基因组中分离两段序列作为同源片段 , 基因枪法转化烟草 , 结果显示即使供体所含同源片段与受体叶绿体基因组相应区域差异高达 10%, 转化效率也无降低。这一现象的发现有助于促进“通用载体”　的改进 , 扩展叶绿体转化受体范围乃至达到商业化应用水平。 4. 成功地通过二次转化获得整合并表达多基因的转基因烟草 , 缩短了研究周期 , 对相关转基因植物的研究有一定参考价值。本文还优化了油菜转化体系 , 使转基因油菜同时整合三个 PHB 合成相关基因的效率由 7.69% 增加至 16.0% 。 田间试验与产物分析正在进行中。

Expression and molecular analysis of phbB gene in Chlamydomonas reinhardtii

The expression vector containing phbB and ble genes was constructed and transformed into cell-wall-deficient strain Chlamydomonas reinhardtii CC-849 by the glass-head method. The transgenic alga was selected and maintained in the TAP agar plates containing 10 mug/mL Zeomycin. Transgenic alga, which could express phbB at the transcriptional level, was obtained and further confirmed with PCR, Southern blot and RT-PCR-DNA hybridization analysis.

聚3—羟基丁酸酯与聚丙撑碳酸酯共混体系研究

本论文对完全生物降解聚（3—羟基丁酸酯）（PHB）和聚丙撑碳酸酯（PPC）共混体系进行了全面研究，目的是提高PHB的综合性能，加深对共混高聚物的基本物理问题的认识，进一步明晰高聚物的结构和性能之间的关系.1.在分析判断PPC的热降解机理的基础上，对PPC进行了封端处理，阻止了以端羟基回咬“解拉链”方式引起的热降解，增加了PPC热降解反应活化能，显著地提高了PPC的稳定性（提高30K以上）.2.经热性能和形态结构等方面的表征，PHB/PPC共混体系为不相容体系，直接在PHB中加入PPC不能改善PHB的韧性和其它力学性能.3.PCL-PEG-PCL嵌段共聚物能够作为PHB/PPC的增容剂，在PHB/PPC共混体系中加入PCL-PEG-PCL三嵌段共聚物能显著减小分散相的平均尺寸.4.选用增塑剂对PPC进行增塑能够在很大范围内（80K）调节PPC的玻璃化转变温度，使PPC表现出弹性体的特性，拓宽了PPC的应用范围.5.增塑剂1,2丙二醇碳酸酯（PGC）对PHB有一定的增塑作用，但不能明显改善PHB的力学性能.6.增塑后的PPC是PHB的良好增韧剂，使PHB由脆性断裂转变为韧性断裂，最佳增韧效果可使PHB的抗冲击强度由36J/m增加到70PHB/30PPC/20PGC的307J/m，增加8倍.7.增塑后的PPC能够实现对PHB增韧，是增塑剂使得PPC在冲击实验条件下仍然保持弹性体的性质，由此引发空洞化、多重银纹和剪切屈服共存的增韧方式提高PHB的性能.