基于新技术的超导电源及失超保护装置研究与设计

超导磁铁以其能实现极高的磁场强度和较低的能量损耗的优势，正在迅速成为现代加速器系统中普遍采用的一项技术。为超导磁体提供励磁的超导电源也就成为了必需研究的课题。此外，与之相似的低压大电流电源也大量的应用于加速器系统中，服务于核物理研究工作。针对这类电源在加速器中的应用，本课题的主要挑战在于如何实现一种高效率和低纹波输出特性的电源。为此，本论文的作者采用了一种完全不同的拓扑结构“多路多相同步整流BUCK变换器”，来达到高效率和低纹波的目标。并尝试使用数字技术来实现控制单元。本论文首先详细介绍了“多路多相同步整流BUCK变换器”的拓扑，通过计算和推导介绍了这种拓扑是如何提高效率和减少纹波电流输出的。然后介绍了这种拓扑结构所必需解决的均流问题、其产生原因和解决办法：一种几乎无损的单路电流的测量方法，以及这种测量方法的原理和实现方法。之后介绍了整个电源的参数计算和PCB板设计的一些细节。最后详细介绍了用MCU实现的控制器的设计细节。作为超导电源必配的失超保护装置，它担负着在失超故障状态，将超导磁体内存储的能量在尽量短的时间内消耗在外部负载上，以用于实现保护超导磁体的功能。因此超导磁铁失超保护装置 的设计原则是：可靠性和经济性。本论文最后一部分详细介绍了按照这个目标设计的超导磁铁失超保护装置及其设计细节

加速器开关电源研究

本文主要介绍了HIRFL和HIRFL-CSR中使用的高稳定度直流稳流开关电源和脉冲开关电源的设计方法，给出了一台零电压开通移相软开关电源样机和一台斩波式两象限工作电源样机的设计过程的设计结果，并利用仿真软件对设计完成的电路进行了仿真，最后给出了样机电源的试验结果。引言介绍了本文选题的背景，HIRFL和HIRFL-CSR的有关情况，加速器对电源的要求，以及国内外同类电源的相关情况。第一章主要介绍了稳定电源中影响稳定度的主要因素及解决手段，最后建立起了斩波式电源和移相软开关电源的数学模型和等效电路。第二章主要介绍了零电压开通移相软开关电源的工作原理、设计方法、设计过程和样机试验结果。第三章则详细介绍了斩波式两象限工作电源的原理、设计、仿真和样机试验。第四章则讨论了开关电源的电磁兼容性，扼要介绍了电磁干扰的测量、抵制、相关国内国际标准，。然后分析了谐波的影响及其危害性，同时对CSR电源系统对电网将产生的影响进行了评估。第五章介绍了电源主要技术指标的定义、测量方法的测量仪器。第六章介绍了电源可靠性的有关概念及其评价。最后在第七章里，讨论了本文工作的意义。

高稳定度高压开关电源设计

本文分析了国内外开关电源的发展和现状，研究了高压开关电源的基本原理以及开关电源在电力直流操作电源系统中的应用。根据兰州重离子加速器的要求，设计了一种高稳定度高压开关电源。该系统在借鉴国外和已有的类似电源的基础上，通过采用新的元器件和新的电力电子技术设计而成。该系统以工GBT作为功率开关器件，构成BUCK开关变换器，采用脉宽调制（PWM）技术来控制输出电压的变化。系统中采用TL494、UC3637、ML57962等一系列集成电路，以实现实时采样电压反馈信号、PWM信号以及工GBT所需要的功率驱动信号。电路中采用斩波调压和逆变分开，各司其职的结构，保证了电路可靠、线性的调节；采用前馈电路进行补偿，确保系统能很好的抑制电网的中频扰动。通过MATLAB的计算仿真证明，这些措施都对对系统的性能起到了很好的作用。为了系统的安全可靠，还设计了软启动和过流保护电路。通过实验证明该系统能安全、可靠运行，达到了设计要求。

Study of an electroosmotic pump for liquid delivery and its application in capillary column liquid chromatography

A packed-bed electroosmotic pump (EOP) was constructed and evaluated. The EOP consisted of three capillary columns packed in parallel, a gas-releasing device, Pt electrodes and a high-voltage power supply. The EOP could generate output pressure above 5.0 MPa and constant flow rate in the range of nl/min to a few mul/min for pure water, pure methanol, 2 mM potassium dihydrogenphosphate buffer, the buffer-methanol mixture and the pure water-methanol mixture at applied potentials less than 20 W The composition of solvent before/after pumping was quantitatively determined by using a gas chromatograph equipped with both flame ionization detector and thermal conductivity detector. It was found that there were no apparent changes in composition and relative concentrations after pumping process for a methanol-ethanol-acetonitrile mixture and a methanol-water mixture. Theoretical aspect of the EOP was discussed in detail. An capillary HPLC system consisting of the EOP, an injection valve, a 15 cm x 320 mum i.d., 5 mum Spherigel C(18) stainless steel analytical column, and an on-column UV detector was connected to evaluate the performance of the EOP. A comparative study was also carried out with a mechanical capillary HPLC pump on the same system. The results demonstrated that the reproducibility of flow rate and the pulsation-free flow property of the EOP are superior to that of mechanical pump in capillary HPLC application. (C) 2004 Elsevier B.V. All rights reserved.

An electroosmotic pump for packed capillary liquid chromatography

An electroosmotic pump (EOP) capable of generating pressure above 3 MPa and mul/min flow rate with reverse phase mobile phases of HPLC was constructed and evaluated. The pump consisted of three parallel connected fused silica capillary columns (25 cm x 320 mum I.D.) packed with 2 mum silica materials, hollow electrodes, a high voltage DC power supply, and. a liquid pressure transducer. The EOP was applied in a capillary liquid chromatographic system for mobile phase delivery instead of a mechanical pump. Standard samples containing thiourea, naphthalene, anthracene, phenanthrene and acetonitrile were separated on a 15 cm x 320 mum I.D. 5 mum Chromasil C-18 packed capillary column with acetonitrile/water as mobile phase. (C) 2003 Elsevier Science B.V. All rights reserved.

Two-dimensional capillary electrophoresis involving capillary isoelectric focusing and capillary zone electrophoresis

Capillary isoelectric focusing (cIEF) and capillary zone electrophoresis (CZE) was on-line hyphenated by a dialysis interface to achieve a 2D capillary electrophoresis (CE) system. The system was used with just one high-voltage power supply and three electrodes (one cathode shared by the two dimensions). The focused zone in the first dimension (i.e. the cIEF) was driven to the dialysis interface by electroosmotic flow (EOF), besides chemical mobilization from the first anode to the shared cathode. And then in the second dimension (i.e. the CZE), the separated zone was further separated and driven by an inverted EOF, which originated from the charged layer of a cationic surfactant adsorbed onto the inner wall of the capillary. Finally, a solution of ribonuclease was rapidly separated to assess the feasibility of the two-dimensional CE implement. (C) 2003 Elsevier B.V. All rights reserved.

一个改进的随机动力学水平衡模型及其应用研究Ⅰ.模型

本文在Eagleson随机动力学水平衡模型的基础上 ,改进了原模型中蒸腾、蒸发量等项的计算方法 ;并根据黄土区降水分布特点 ,将全年分为 1 6个时间长度不等的降水时段 ,分别统计降水特征参数 ,利用质量守衡定律和逐步校正演算法 ,可计算出水文生态系统平衡体系水均衡要素的定量分配和活动层土壤含水量的年动态变化 ,代表了原模型中确定土壤含水量的简单统计法 ,从而可提高模型计算精度和实用性 .改进后的随机动力学水平衡模型更适用地黄土高原的特定水文生态系统

基于CAN总线的物流拣选设备的设计

简要介绍了物流的发展现状 ,详细描述了基于CAN总线的物流拣选系统的结构、供电方式和参数设定方法 ,并为系统硬件设计中的电源转换、总线驱动和地址译码等公共电路以及总线控制器、电子标签和指示灯控制器等主要设备提供了设计方案 ,为系统软件设计中的C5 1编译、通信协议、命令类型和程序控制规划等问题给出了相应的解决方法 ,还与进口同类产品的性能和价格进行了比较

轮式移动宜人机器人技术研究

轮式移动宜人机器人项目研究的主要目的是开发自主式仿人机器人样机 ,探索先进的机器人理论和技术。轮式移动宜人机器人由正交轮式移动平台、腰部、躯干及头部和双臂组成 ,共 2 1个自由度。整体结构包括 :电源系统、机械系统、控制系统和传感系统。电源系统采用车载电池供电。机械系统包括变刚度结构 ,提高了机器人与人交互作业的安全性。控制系统分为中央协调层和执行层结构。传感系统主要实现关节位置检测、姿态检测、力检测和视觉。文章讨论了此机器人的研究进展。

一种低功耗微弱信号放大电路的优化设计与研究

针对远距离声源发射的水声信号微弱、水声接收设备电源能量有限的特点,提出一种功耗小、对无源元件误差灵敏度低、高增益放大的微弱水声信号通用放大电路。系统采用场效应管共源单调谐放大器为前置放大级,由四级级联低功耗运放构成带通滤波放大电路,省去传统的R、C低通网络,实现了对微弱水声信号的高增益放大和海洋背景噪声的归一化处理。通过计算电路网络传递函数极点证明了电路系统的稳定性。海上使用表明系统具有精度高、适应性强、电路稳定性好、功耗小等优点。

Near-diffraction-limited, 35.4 W laser-diode end-pumped Nd:YVO4 slab laser operating at 1342 nm

A diode stack end-pumped Nd:YVO4 slab laser at 1342 nm with near-diffraction-limited beam quality by using a hybrid resonator was presented. At a pump power of 139.5 W, laser power of 35.4 W was obtained with a conversion efficiency of 25.4% of the laser diode to laser output. The beam quality M-2 factors were measured to be 1.2 in the unstable direction and 1.3 in the stable direction at the output power of 29 W. (C) 2009 Optical Society of America

Dynamic readout of subdiffraction-limited pit arrays with a silver superlens

Recent theoretical and experimental results suggested that the silver superlens could be constructed through controlling silver thin film thickness and preparation conditions, and applied in subdiffraction-limited optical imaging and optical lithography. In this work, we report another significant application of silver superlens-ultrahigh density optical data storage. With the silver superlens the subdiffraction-limited pit arrays on an optical disk are dynamically read out and the carrier-to-noise ratio can reach 25 dB for the thin film thickness of 46 nm. The readout laser power and readout velocity have little effect on the carrier-to-noise ratio. Additionally, in our experiment the silver thin film thickness needs to be controlled in the range from 20 to 80 nm.

20-W average power, high repetition rate, nanosecond pulse with diffraction limit from an all-fiber MOPA system

In this article, we report an all-fiber master oscillator power amplifier (MOPA) system, which can provide high repetition rate and nanosecond pulse with diffraction-limit. The system was constructed using a (2 + 1) X 1 multimode combiner. The Q-Switched, LD pumped Nd:YVO4 solid-state laser wets used (is master oscillator. The 976-nm fiber-coupled module is used as pump source. A 10-m long China-made Yb3+-doped D-shape double-clad large-mode-area fiber was used as amplifier fiber. The MOPA produced as much as 20-W average power with nanosecond pulse and near diffraction limited. The pulse duration is maintained at about 15 its during 50-175 kHz. The system employs a simple and compact architecture and is therefore suitable for the use in practical applications such as scientific and military airborne LIDAR and imaging. Based oil this system. the amplification performances of. the all fiber amplifier is investigated. (C) 2008 Wiley Periodicals, Inc.

7.3 W of single-frequency output power at 2.09 μm from an Ho:YAG monolithic nonplanar ring laser

Single-frequency output power of 7.3 W at 2.09 mu m from a monolithic Ho:YAG nonplanar ring oscillator (NPRO) is demonstrated. Resonantly pumped by a Tm-doped fiber laser at 1.91 mu m, the Ho:YAG NPRO produces 71% of slope efficiency with respect to absorbed pump power and nearly diffraction-limited output with a beam quality parameter of M-2 approximate to 1.1. (c) 2008 Optical Society of America