408 resultados para CuO nanoparticles
Resumo:
PL properties of Er3+ doped SiOx films containing Si nanoparticles have been studied. Er3+ emission intensity does not depend strongly upon crystallinity of Si clusters. The films can yield efficient Er3+ emission.
Resumo:
FePt nanoparticles with average size of 9 nm were synthesized using a diblock polymer micellar method combined with plasma treatment. To prevent from oxidation under ambient conditions, immediately after plasma treatment, the FePt nanoparticle arrays were in situ transferred into the film-growth chamber where they were covered by an SiO2 overlayer. A nearly complete transformation of L1(0) FePt was achieved for samples annealed at temperatures above 700 A degrees C. The well control on the FePt stoichiometry and avoidance from surface oxidation largely enhanced the coercivity, and a value as high as 10 kOe was obtained in this study. An evaluation of magnetic interactions was made using the so-called isothermal remanence (IRM) and dc-demagnetization (DCD) remanence curves and Kelly-Henkel plots (Delta M measurement). The Delta M measurement reveals that the resultant FePt nanoparticles exhibit a rather weak interparticle dipolar coupling, and the absence of interparticle exchange interaction suggests no significant particle agglomeration occurred during the post-annealing. Additionally, a slight parallel magnetic anisotropy was also observed. The results indicate the micellar method has a high potential in preparing FePt nanoparticle arrays used for ultrahigh density recording media.
Resumo:
We reported the synthesis of CdS semiconductor nanoparticles using a simple one-pot reaction by thermolysis of cadmium acetylacetonate in dodecanethiol. Optical measurements of the as-obtained CdS nanoparticles revealed that their optical properties were closely related to surface effects. Based upon the cocktail of poly (N-vinylcarbazole) (PVK) and CdS nanoparticles, a bistable device was fabricated by a simple solution processing technique. Such a device exhibited a remarkable electrical bistability, which was attributed to the electric field-assisted charge transfer between PVK and the CdS nanoparticles capped by dodecaethiol. The conduction mechanism changed from an injection-controlled current to a bulk-controlled one during switching from OFF-state to ON-state.
Resumo:
Plasmon resonance spectra of supported Ag nanoparticles are studied by depositing the particles on different substrates. It was found that the dielectric properties of the substrates have significant effects on the spectral line shape, except the resonance frequency. Beyond the plasmon resonance band, the spectral shape is mainly governed by the dielectric function, particularly its imaginary part, of the substrate. The plasmon resonance band, on the other hand, may be severely distorted if the substrate is absorbing strongly.
Resumo:
A liquid laser medium with a lifetime of 492 mu s and a fluorescent quantum efficiency of 52.5% has been presented by stably dispersing dimethyl dichorosilane-modified Nd2O3 nanoparticles in dimethylsulfoxide. Its optical properties and mechanism were investigated and explained by fluorescence resonance energy transfer theory. The calculation result shows that the quenching of Nd-III F-4(3/2)-> I-4(11/2) transition via O-H vibrational excitation can be eventually neglected. The main reason is that the silane-coupling agent molecules remove the -OH groups on Nd2O3 nanoparticles and form a protective out layer. (c) 2007 American Institute of Physics.
Resumo:
The strong absorption of gold nanoparticles in the visible spectral range allows the localized generation of heat in a volume of only a few tens of nanometer. The efficient conversion of strongly absorbed light by plasmonic gold nanoparticles to heat energy and their easy bioconjugation suggest that the gold nanoparticles can be used as selective photothermal agents in molecular cell targeting. The selective destruction of alkaline phosphatase, the permeabilization of the cell membrane and the selective killing of cells by laser irradiating gold nanoparticles were demonstrated. The potential of using this selective technique in molecularly targeted photothermal therapy and transfection is discussed.
Resumo:
本论文由两大部分组成。第一部分是新型稀土永磁材料Nd-Fe-B氧化过程及抗氧化新体系的研究。Nd-Fe-B永磁体是1983年问世的新型稀土永磁材料。和原有的铁氧体及Sm-Co体系相比,具有磁能积高(50MGOe)。价廉源广,制备简单等三大优点;也有居里温度低(310℃),温度系数大(-0.126%/K),易氧化等三大缺点,我们对Nd-Fe-B合金的氧化过程进行研究,发现该材料热稳定性差,容易发生氧化反应,氧化使材料的结构受到破坏,并给材料的磁性造成不可恢复的损失,整个氧化过程是分阶段的。在室温和干燥的空气中材料基本是稳定的。150℃以下材料磁性受到破坏的主要原因是体系中Nd的氧化。230℃以上材料主体成分Fe也开始氧化,温度升高使反应进程大大加快。到800℃左右反应基本结束,最终产物主要为Fe_2O_3, Nd_2O_3·FeNdO_3和NdBO_3。增加体系中B的相对含量和添加某些新的元素均能提高材料的抗氧化能力,新研制的Nd-Fe-B-Si四元体系和原来的Nd-Fe-B体系相比具有下列显著优点:新体系的抗氧化能力大大提高,经过150℃的长期恒温试验,材料的结构,磁性均未受到破坏,某些体系甚至能在更高的温度下使用,另外,新体系的居里温度Tc也大为提高。比原有Nd-Fe-B磁体高40℃左右。因此该体系是一种大有发展前途的新材料。此外,我们用动态热重法研究了Nd-Fe-B合金的氧化动力学过程,但由于我们新合成的体系构相较为复杂,未能达到预期效果。第二部分是CuO,Y_2Cu_2O_5,BaCuO_2和RBa_2Cu_3O_(7-δ)超导体(R稀土元素)磁化率及铜价态研究,铜的氧化物具有复杂的化学计量关系和磁学性质。在对CuO的磁化率研究中,我们发现在低温区(77K-110K)和一定磁场下,CuO由顺磁突变为抗磁。这种转变与磁场强度有很大关系。这一结果与前人的工作有较大的出入。而与超导体的形为极为相似。所不同的是,转变温度与样品的重量也有关系。实验结果重复。由于铜氧性质在R-Ba-Cu-O超导体中起决定作用,因此有必要对CuO的低温磁性作进一步研究。此外,我们对文献尚未报道的Y_2Cu_2O_5的磁化率在77-300K温度区间进行了测量,发现它是顺磁性物质,室温有效磁矩μ_(eff) = 2.13μB。高于Cu~(2+)的理论有效磁矩(1.73μB)。经过碘量法价态分析,发现Y_2Cu_2O_5中有部分Cu~(3+),这与磁化率的测定相符合。Tc在90K左右的Y-Ba-Cu-O体系是近期才发现的具有超高温超导材料。该体系有着独特的结构和性质。在对R-Ba-Cu-O及R-Ba-Cu-O-Ag超导体的研究中,我们发现此类超导体属II类超导体,在临界温附近该超导体由顺磁转变为抗磁,此种变化与磁场强度有很大关系,当场强大于一定值后,则观察不到这种转变。在对RBa_2Cu_3O_(7-δ) (R = Y, Sm, Eu, Gd, Dy, Ho, Er, Tm)超导体和具有相同配比但由于合成工艺条件不同而不超导的R'Ba_2Cu_3O_(7-δ) (R' = Y, Sm, Eu, Gd)非超导体的铜价态分析中,我们发现此两类化合物中均含有一定量的Cu~(3+)。且超导体中Cu~(3+)的含量高于非超导体中Cu~(3+)的含量(同样比例)。我们还发现Cu~(3+)对水极为敏感,将RBa_2Cu_3O_(7-δ) (除R = Gd, Dy, Er)超导体在未干燥容器中测出的Cu~(3+)量远远低于干燥容器中所测得的值。我们认为这可能是引起超导体不稳定的重要原因。由于尚缺乏用其它手段检测到超导体中Cu~(3+)存在的例证。故对此问题还有待于今后继续作进一步的研究。
Resumo:
A broad absorption band around 500 nm is observed in ZnS nanoparticles. The absorption becomes more intensive and shifts to the blue as the particle size is decreased. The absorption energy is lower than the band gap of the particles and is considered to be caused by the surface states. This assignment is supported by the results of the fluorescence and of the thermoluminescence of the surface states. Both the absorption and the fluorescence reveal that the surface states are size dependent. The glow peak of the semiconductor particles is not varied as much upon decreasing size, indicating the trap depth of the surface states is not sensitive to the particle size. Considering these results, a new model on the size dependence of the surface states is proposed, which may explain our observations reasonably. (C) 1997 American Institute of Physics.
Resumo:
The thermoluminescence (TL) of ZnS nanoparticles is reported. The TL intensity increases as the particle size is decreased. The consistency of the size dependence of the TL with that of the surface fluorescence indicates that the TL may be related to the surface states. TL may be caused by the recombination of carriers released from the surface states or defect sites by heating. Smaller particles have higher surface/volume ratio and more surface states, therefore contain more accessible carriers for TL. Besides, the carrier recombination rate increases upon decreasing size due to the increase of the overlap between the electron and hole wave functions. These two effects may make the TL increase upon decreasing size of the particles. The appearance of TL prior to any radiation reveals that trapped carriers have pre-existed. The investigation of TL may provide some useful information about the surface states that may explain the size dependence of the surface fluorescence. (C) 1997 American Institute of Physics.
Effects of low-molecular-weight organic acids on Cu(II) adsorption onto hydroxyapatite nanoparticles