DIFFERENT INTERDIFFUSION CHARACTERISTICS BETWEEN AG/YBA2CU3O7-X AND AL/YBA2CU3O7-X CONTACT INTERFACES

The differences between the interdiffusion characteristics of Ag/YBa2Cu3O7-x and Al/YBa2Cu3O7-x contact interfaces have been revealed by secondary ion mass spectrometry (SIMS). The different electrical properties of Ag/YBa2Cu3O7-x and YBa2Cu3O7-x films after high temperature treatment are well understood by the SIMS results.

Influence of annealed ohmic contact metals on electron mobility of strained AlGaN/GaN heterostructures

The influence of annealed ohmic contact metals on the electron mobility of a two dimensional electron gas (2DEG) is investigated on ungated AlGaN/GaN heterostructures and AlGaN/GaN heterostructure field effect transistors (AlGaN/GaN HFETs). Current-voltage (I-V) characteristics for ungated AlGaN/GaN heterostructures and capacitance-voltage (C-V) characteristics for AlGaN/GaN HFETs are obtained, and the electron mobility for the ungated AlGaN/GaN heterostructure is calculated. It is found that the electron mobility of the 2DEG for the ungated AlGaN/GaN heterostructure is decreased by more than 50% compared with the electron mobility of Hall measurements. We propose that defects are introduced into the AlGaN barrier layer and the strain of the AlGaN barrier layer is changed during the annealing process of the source and drain, causing the decrease in the electron mobility.

NiO removal of Ni/Au Ohmic contact to p-GaN after annealing

The Ni/Au contact was treated with oxalic acid after annealing in O_2 ambient, and its I-V characteristic showed the property of contact has been obviously improved. An Auger electron spectroscopy (AES) depth pro-file of the contact as-annealed showed that the top layer was highly resistive NiO, while an X-ray photo-electron spectroscopy (XPS) of oxalic acid treated samples indicated that the NiO has been removed effectively. A scanning electron microscope (SEM) was used to observe the surface morphology of the contacts, and it was found that the lacunaris surface right after annealing became quite smooth with lots of small Au exposed areas after oxalic acid treatment. When the test probe or the subsequently deposited Ti/Au was directly in contact with these small Au areas, they worked as low resistive current paths and thus decrease the specific contact resistance.

An augmented method for free boundary problems with moving contact lines

An augmented immersed interface method (IIM) is proposed for simulating one-phase moving contact line problems in which a liquid drop spreads or recoils on a solid substrate. While the present two-dimensional mathematical model is a free boundary problem, in our new numerical method, the fluid domain enclosed by the free boundary is embedded into a rectangular one so that the problem can be solved by a regular Cartesian grid method. We introduce an augmented variable along the free boundary so that the stress balancing boundary condition is satisfied. A hybrid time discretization is used in the projection method for better stability. The resultant Helmholtz/Poisson equations with interfaces then are solved by the IIM in an efficient way. Several numerical tests including an accuracy check, and the spreading and recoiling processes of a liquid drop are presented in detail. (C) 2010 Elsevier Ltd. All rights reserved.

Influence of Contact Geometry on Hardness Behavior in Nano-indentation

In this paper the influence of contact geometry, including the round tip of the indenter and the roughness of the specimen, on hardness behavior for elastic plastic materials is studied by means of finite element simulation. We idealize the actual indenter by an equivalent rigid conic indenter fitted smoothly with a spherical tip and examine the interaction of this indenter with both a flat surface and a rough surface. In the latter case the rough surface is represented by either a single spherical asperity or a dent (cavity). Indented solids include elastic perfectly plastic materials and strain hardening elastic-plastic materials, and the effects of the yield stress and strain hardening index are explored. Our results show that due to the finite curvature of the indenter tip the hardness versus indentation depth curve rises or drops (depending on the material properties of the indented solids) as the indentation depth decreases, in qualitative agreement with experimental results. Surface asperities and dents of curvature comparable to that of the indenter tip can appreciably modify the hardness value at small indentation depth. Their effects would appear as random variation in hardness.

土地利用总体规划环境影响评价指标体系研究——以邛崃市土地利用总体规划为例

土地利用是人类根据土地质量特性来开发利用土地，创造财富，满足人类生产和生活的需要，同时改善环境，满足人类生存需要的过程。土地利用总体规划是对未来各类用地在空间上、时间上作出总体的协调的预先安排，不仅受到一定历史背景的制约，同时也受影响于当前的社会经济发展情况。但是，国内传统的土地利用总体规划往往从狭窄的技术经济观点出发，对远期的生态环境问题、社会问题缺少考虑，将新的用地尽量安排在最便捷、最经济的地方。 由于土地利用总体规划对环境影响具有长期性、复杂性、综合性、有时还有不可逆转性等特点，迫切需要在编制土地利用总体规划时对规划区与土地利用有关的环境影响进行科学研究，把环境保护纳入土地利用活动的计划、决策和规划实施中，促进土地资源持续、协调的利用。为更好地进行土地利用总体规划环境影响评价必须首先建立相应的评价指标体系，而目前国内关于该项研究的理论和实践的相关报道都较少。 本论文在综述国内外土地利用总体规划环境影响评价的理论与实践的基础上，在国内第一批开展了相关领域的案例研究，采用理论研究和案例分析相结合的研究方法对土地利用总体规划环境影响评价方法和指标体系进行了研究，对邛崃市土地利用总体规划进行了环境影响评价，其研究的主要内容和论点如下: (1)第一次根据FAO 确定的五大原则，引入了生态用地的概念并按照价值模型构建了以土地资源可持续利用为目标的县级土地利用总体规划环境影响评价的指标体系。以生产性、稳定性、保护性、经济活力、社会可接受性五个方面作为指标层来度量土地利用总体规划的环境影响，并选取了土地利用率、土地整理率、水面指数、生态用地面积比例、耕地转化率、建设用地产值指数、公众满意度等21 个元指标作为具体的评价指标。该指标体系强调了规划方案的公众参与，便于充分吸收公众的意见和建议；并且评价指标获取容易，实用性较强。 (2)在土地利用总体规划环境影响评价方法上进行了有益的探索和尝试，由于土地利用总体规划环境影响评价的主要对象是几个拟定的规划方案，所以采用综合评分法（包括特尔斐法和层次分析法）和公众参与相结合的评价方法。应用上述指标体系和评价方法对邛崃市土地利用总体规划的三个方案进行了评价筛选，高方案最终得分为92.049；中方案最终得分为91.028；而低方案最终得分为95.541，为最优方案。 （3）开展了对土地利用总体规划替代方案和公众参与机制的研究，对公众参与的方式、程序及主要内容从理论和实践两方面进行了有益的尝试，收到了良好的效果。 （4）对邛崃市土地利用总体规划进行了环境影响评价，根据邛崃市的具体情况，对规划实施后可能造成的环境正、负面影响进行了分析和预测，提出了预防或者减轻不良环境影响的对策和措施。 Land use is a process, which is to develop land according to its mass property. Bycreating the wealth and improving the environment, it can meet the need of production,life and human survival. Land use planning, as a planning form to guide land use, issubject to the historical background, and influenced by development of economic andsociety. The land use planning in the past, from narrow economic technology view,lacking of concerning ecologic environmentand social problem, arranged new land in the most convenient and economic place. Because of complexity, comprehensive and sometimes irreversible characteristicsof environmental impact caused by land use planning which has been implemented, it isneed to carry on scientific research on environmental impact related to land use as theland use planning is forming, to bring environmental protection within the plan, policymaking and implementing of land use activity, promoting the sustainment, harmonious use of land resource. This paper, taking the readjustment of land use planning in Qionglai as an example,assessed its environmental impact of land use planning. The main contents and results arepresented as follows: (1) On the basis of the five criterions of AFO, for the first time propose county classoverall planning of land uses SEA index by inducting ecological land use andestablishing the Value factor system, according to Productivity criterion，Stabilitycriterion，Sheltered criterion，Economic livingness criterion，Social acceptabilitycriterion，the environmental impact of land use system was assessed by using Valuemodel. Through identifying the factors of environmental impact of land use planning, thepaper established the factor system of SEA of land use planning. From the land usefactors, 21 factors was chosen to assess the environmental impact degree of land useplanning, such as, index of land use degree, the rate of land collating, index of watersurface, the rate of ecological use land, cultivated land conversion ratio, forest landconversion ratio, public satisfaction degree and so on. These indexes make a point thatpublic participation of plan project fully absorb public idea and propose and the index easily get, better utility. (2) Attempt useful assessment method system of SEA of land use planning. In viewof there are no or almost no inevitable contact among the factors of SEA of land useplanning，we use AHP （Analytic Hierarchy Process） as the main assess method . Thereare three plans are compared in this paper apply the foregoing index and assessmentmethod. The high plan finally score is 92.049，while the middle plan is 91.028. The lowplan score is 95.541，is the best one，as the selected plan. (3) Carry on the research of the alternative scheme of overall planing of land useand public participation，to the fashion ，procedure and object matter carry out helpfulattempt from theory to practice，the results is good. （4）Took place SEA of Qionglai County overall planing of land use，according to thecircumstance of Qionglai，we analyze and forecast the positive and negative affect afterthe plan implement，and put forward the countermeasure and means to prevent or abatebad environmental impact.

Effect of acetylation on the properties of corn starch

Acetylated corn starches with different degrees of substitution (DS 0.85, DS 1.78, DS 2.89) were synthesized by the reaction of corn starch with acetic anhydride in the presence of acetic acid under varying reaction temperatures. The product was characterized by FTIR spectroscopy, H-1 NMR, X-ray diffraction and contact angle measurement. Acid-base titration and H-1 NMR methods were employed to determine the degree of substitution of product. FTIR spectroscopic analysis showed that the characteristic absorption intensities of esterified starch increased with increase in the degree of substitution, and the characterized peak of hydroxyl group almost disappeared in the spectrum of DS 2.89 acetylated starch. The detailed chemical microstructure of native starch and acetylated starch was confirmed by H-1 NMR, C-13 NMR and C-13-(1) H-1 COSY spectra.

Hot-corrosion behaviors of overlay-clad yttria-stabilized zirconia coatings in contact with vanadate-sulfate salts

A dense clad overlay with chemical inertness was achieved on top of the plasma-sprayed YSZ thermal barrier coatings by laser in order to protect them from hot-corrosion attack. The Al2O3-clad YSZ coating exhibited good hot-corrosion behavior in contact with salt mixture of vanadium pentoxide (V2O5) and sodium sulfate (Na2SO4) for a longtime of 100 h at 1173 K. The LaPO4-clad YSZ coating showed corrosion resistance inferior to the Al2O3-clad one. Yttria was leached from YSZ by reaction between Y2O3 and V2O5, which caused progressive destabilization transformation of YSZ from tetragonal (t) to monoclinic (m) phase. The chemical inertness of the clad layers and the restrained infiltration of the molten corrosive salts by the dense clad layers were primary contributions to improvement of the hot-corrosion resistances.

Rim instability by solvent-induced dewetting

We study the condition of the occurrence of the rim instability in the solvent-induced dewetting process. Our experimental results show that the film thickness not only greatly influences the occurrence of the rim instability, but also influences the wavelength lambda as characterized by the undulation of the deformed contact line. The molecular weight of polymer does not almost influence the occurrence of the rim instability and the wavelength lambda. The wavelength lambda is proportional to the width of the rim in the rim instability region. The receding contact angle theta of polymer solutions on substrates in the dewetting process is an important factor to influence the rim instability in the solvent-induced dewetting.

Critical surface tension of acrylamide-grafted polypropylene copolymer by the contact angle method

The contact angles theta of polar liquids on PP-g-AM copolymer (AM content 0.19, 0.26, and 0.37 wt%) were measured. The critical surface tension gamma(c) of PP-g-AM films were evaluated by the Zisman plot (cos theta versus gamma(L)), the Young-Dupre-Good-Girifalco plot (1 + cos theta) versus 1/gamma(L)(0.5), and the log(1 + cos theta) versus log gamma(L) plot. The gamma(L) values estimated by the plot log(1 + cos theta) versus log gamma(L) were smaller than those obtained by the other plots.

The determination of ethylene-propylene copolymer-grafted-glycidyl methacrylate by the contact angle method

The contact angles theta of some liquids on ethylene-propylene copolymer-grafted-glycidyl methacrylate (EPM-g-GMA) were measured. The critical surface tensions r(c) of EPM-g-GMA were evaluated by the Zisman Plot (cos theta versus r(L)), Young-Dupre-Good-Girifalco plot (1 + cos theta versus 1/r(L)(0.5)) and log (1 + cos theta) versus log(r(L)) plot. The following results were obtained: the r(c) values varied significantly with the estimation methods. The critical surface tension r(c) decreased with the increase of the degree of grafting of EPM-g-GMA.