Sn-modified Pt/SAPO-11 catalysts for selective hydroisomerization of n-paraffins

The hydroconversion of n-paraffins is a key reaction in hydrodewaxing of lubricating base oil. In this paper, we investigate the performance of Pt/SAPO-11 catalysts for isomerization of n-paraffins by the model compound of n-dodecane. Under this experimental condition, yields of feed isomers as well as cracking products are a function of the total n-dodecane conversion. Primary products are methylundecane while multi-brancheds and cracking products are formed in successive reactions. The result shows that the addition of Sn increases the selectivity for isomerization reaction. The most ideal experimental data for hydroconversion of n-dodecane is that the selectivity of isomerized products gets 90% when conversion of n-dodecane is 90% for the Sn-promoted Pt/SAPO-11 catalyst.

污染土壤中Sn、Hg、Sb、Bi解吸动力学特性的研究

土壤中重金属的解吸直接影响重金属在环境中的形态转化和植物有效性。文章以我国东北地区草甸棕壤作为研究对象,通过对Sn、Hg、Sb、Bi单一及复合污染土壤中Sn、Hg、Sb、Bi的解吸动力学行为的研究,探索污染土壤中重金属Sn、Hg、Sb、Bi的解吸特性与规律。结果表明,不同污染类型的污染土壤中Sn、Hg、Sb、Bi这几种重金属的解吸量随着振荡时间的延长而不断增加。重金属Sn、Hg、Sb、Bi的解吸过程可分为快速反应阶段和慢速反应阶段。描述土壤Sn、Hg、Sb、Bi解吸动力学过程的最优模型为Elovich方程,其次为双常数方程,而一级动力学方程拟合效果不佳。此外,污染土壤中重金属Sn、Hg、Sb、Bi的解吸过程受共存重金属元素的影响。

Enhancement of the electrooxidation of ethanol on Pt-Sn-P/C catalysts prepared by chemical deposition process

In this paper, five Pt3Sn1/C catalysts have been prepared using three different methods. It was found that phosphorus deposited on the surface of carbon with Pt and Sn when sodium hypophosphite was used as reducing agent by optimization of synthetic conditions such as pH in the synthetic solution and temperature. The deposition of phosphorus should be effective on the size reduction and markedly reduces PtSn nanoparticle size, and raise electrochemical active surface (EAS) area of catalyst and improve the catalytic performance. TEM images show PtSnP nanoparticles are highly dispersed on the carbon surface with average diameters of 2 nm. The optimum composition is Pt3Sn1P2/C (note PtSn/C-3) catalyst in my work. With this composition, it shows very high activity for the electrooxidation of ethanol and exhibit enhanced performance compared with other two Pt3Sn1/C catalysts that prepared using ethylene glycol reduction method (note PtSn/C-EG) and borohydride reduction method (note PtSn/-B). The maximum power densities of direct ethanol fuel cell (DEFC) were 61 mW cm(-2) that is 150 and 170% higher than that of the PtSn/C-EG and PtSn/C-B catalyst.

~(57)Fe,~(119)Sn掺杂Bi_2Sr_2Ca_(n-1)Cu_nO_(2n+4)的化学键性质和Mssbauer谱位移研究

利用电介质的平均能带模型计算了Bi2 Sr2 Can- 1CunO2n +4 (n =1,2 ,3)的化学键参数 .应用由共价性和极化率定义的化学环境因子计算了57Fe和119Sn在Bi2 Sr2 Can - 1CunO2n +4 中的M ssbauer同质异能位移 ,确定了57Fe和119Sn在Bi2 Sr2 Can- 1CunO2n +4 中的价态和占位情况 .

The phase transitions of hetero atoms substituted molecular sieves Me-VPI-5(Me=Mg, Ti, Sn, Si) and their influence on spectra structures of Eu(III) ion

The hetero atom substituted aluminophosphate molecular sieves Me-VPI-5(Me = Mgt Ti, Sn, Si) were synthesized hydrothermally. Rare earth ions are originally doped into these microporous materials by aqueous solution ion exchange procedures. The phase transitions of the microporous materials are investigated by high-temperature and high-pressure experimental techniques. The influence of the phase transitions on the rare earth ions' spectral structures is discussed, With the increase of temperature, Eu(II)Mg-VPI-5 is converted into Eu(II)Mg-AIPO(4)-8, then into tridymite phase. The pressure has a notable influence on Eu(II) ion's spectral structures. The spectral structures have changed regularly with the increase of pressure.

杂原子Me－VPI－5（Me＝Mg，Ti，Sn，Si）相转变及其对Eu（Ⅲ）光谱结构的研究

用水热同晶置换法合成了杂原子磷酸铝分子筛Ｍｅ－ＶＰＩ－５（Ｍｅ＝Ｍｇ，Ｔｉ，Ｓｎ，Ｓｉ）．通过水相离子交换法掺杂稀土离子，考察了高温和高压下的相变行为．讨论了相变过程对稀土离子光谱的影响．随着温度升高，Ｅｕ（Ⅲ）Ｍｇ－ＶＰＩ－５先转变为Ｅｕ（Ⅲ）－ＡｌＰＯ４－８，然后又转变成致密的磷石英相．压力对Ｅｕ（Ⅲ）光谱结构具有显著影响．随着压力增加，Ｅｕ（Ⅲ）光谱结构发生规律性变化．

SYNTHESIS AND MOLECULAR-STRUCTURE OF NBU2[(MEO)3C6H2C(O)N2CHC6H4O]SN FORMED IN THE REACTION OF DI-N-BUTYLTIN(IV) OXIDE WITH 3,4,5-TRIMETHOXY-BENZOYL SALICYLAHYDRAZONE

The title complex was synthesized and characterized by H-1, C-13, Sn-119 NMR and IR spectra. A single crystal X-ray diffraction study confirmed its molecular structure and revealed that 3,4,5-trimethoxy-benzoyl salicylahydrazone was a tridentate and approximately planar ligand. The complex crystallizes in the triclinic space group P1BAR with a = 9.208(3), b = 12.536(2), c = 12.187(4) angstrom, alpha = 113.12(2), beta = 90.58(2), gamma = 81.42(2), V = 1277.5(6) angstrom, Z = 2. The structure was refined to R = 0.033 and R(w) = 0.041 for 3944 observed independent reflections. The tin atom has a distorted trigonal bipyramidal coordination. The Sn-C bond lengths are 2.129(5) and 2.113(5) angstrom (av. 2.121(5) angstrom), the C-Sn-C angle is 123.3(2); the bond length between the tin atom and the chelating nitrogen is 2.173(3) angstrom. Two chain carbon atoms and the chelating nitrogen atom occupy the basal plane. The skeleton of two erect oxygen atoms and the tin atom is bent (O-Sn-O angle = 153.5(1)). In the complex, the ligand exists in the enol-form.

掺Sb、Sn和Cd的In_2O_3的电性研究

本文研究了掺杂Sb、S_n及Cd的In_2O_3的电性质,并与纯的In_2O_3进行比较,得到一些有意义的结果。IO的电导率及载流子浓度主要由氧缺位所致;ITO和ISO的电导率和载流子浓度,主要由掺杂元素所致;掺Sn的电导率、载流子浓度和迁移率高于掺Sb,其原因在于在同样掺杂浓度的条件下,ITO中的中性杂质浓度低于ISO及掺Sn后使电子离域程度增大。在掺Cd浓度高时,随着Cd浓度增加,电导率和载流子浓度均降低。

STUDIES ON DEFECT STRUCTURE AND CATALYTIC PROPERTIES OF SN-MO OXIDES

The present work is devoted to the studies on relationship of structure and activity of Sn-Mo oxides by using XRD, ESR, IR, XPS, TEM and SEM. Eight samples with Mo/(Mo + Sn) rations: 0.0, 0.1, 0.2, 0.4, 0.6, 0.8, 0.9, 1.0 were prepared. On the basis of structure characterization, Sn-Mo oxides can be divided into three groups: Catalysts I with Mo/(Mo + So) less-than-or-equal-to 0.2, Catalysts II with 0.2 < Mo/(Mo + Sn) < 0.8, and catalysts III with Mo/(Mo + Sn) greater-than-or-equal-to 0.8. The solid solution of Mo5+ in tin oxide was formed and the cation vacancy was formed in catalysts I. The solid solution of Sn4+ in molybdenum oxide was formed in catalysts III. The lattice oxygen in catalysts III has higher mobility and reactivity than that in catalysts I. The catalysts III showed higher activity but lower selectivity than that of catalysts I.

用ESR方法研究Sn-Mo氧化物固溶体形成的机理

本文研究了Sn-Mo混合氧化物催化剂的活性与焙烧温度的关系。对Sn_(0.975)Mo_(0.025)催化剂进行了不同焙烧温度的ESR研究,跟踪观察了Sn-Mo混合氧化物固溶体随焙烧温度变化的形成过程。结果表明,焙烧温度在100—300℃之间,钼以钼酸铵微晶高度分散在氧化锡表面;300—550℃时,随温度升高钼逐渐向氧化锡体相扩散;550℃时可能形成嵌入型固溶体,催化活性最好;600℃开始形成置换型固溶体,Mo以Mo~(5+)形式取代氧化锡晶格中的Sn~(4+),此时ESR信号gzz>gxx>gyy。

一种新型的铅钙板栅合金——Pb-Ca-Sn-Al-Na

钠加到Pb—Ca—Sn—Al合金中,可以改善它的延伸率和浇铸性能。对于Pb—Ca—Sn—Al合金来说,钠是有效的变晶剂,它的最佳含量是0.01～0.077％。

Sn-Mo混合氧化物的缺陷结构及催化性能的研究

本文以1-丁烯在水蒸汽存在下选择性氧化制甲乙酮为典型反应,利用 XRD,ESR,IR,XPS,TEM 和 SEM 研究了 Sn-Mo 氧化物的结构与活性的关系.制备了8个样品,A,B,C,D,E,F,G 和 H 的 Mo/(Mo+Sn)分别为0,0.1,0.2,0.4,0.6,0.8,0.9,1.0.根据结构特征,可将 Sn-Mo 氧化物分为三组:第Ⅰ组 Mo/(Mo+Sn)≤0.2;第Ⅱ组0.2