A new method for spectrum reproduction and interferogram processing

On the basis of researchon the theory and mathe matics of interference data collection of the spatially modulated polarization interference imaging spectrometer designed by us, this paper mainly analyses and compares three different methods of spectrum reconstruction and interferogram processing. Specially, the authors introduce the nonparametric model of Music algorithm which is maturely used in power spectrum estimation into the spectrum reconstruction processing for the first time. This method prodigiously improves the resolution of reproduced spectrum, and provides a better math matic model for the improvement of resolving power in spectrum reproduction.

A NEW TYPE OF SILICON-ON-INSULATOR WITH A PERFECT SURFACE SILICON LAYER

A novel silicon structure consisting of a silicon-on-defect layer (SODL), with enhanced surface Hall mobility in the surface layer on a buried defect layer (DL), has been discovered [J. Li, Nucl. Instr. and Meth. B59/60 (1991) 1053]. SODL material was formed by using proton implantation and subsequent two-step annealing. The implantation was carried out with a Varian 350D ion implanter. Based on the discovery, a standard measurement method (current-voltage curve method) was adopted to measure the true resistivity value of the DL in order to replace the spreading resistivity measurement by which the true resistivity in seriously defective silicon cannot be obtained. By adopting the current-voltage current method, the true resistivity value of the DL is measured to be 4.2 x 10(9) OMEGA cm. The SODL material was proved to be a silicon-on-insulator substrate.

PROTON-IMPLANTED NEW TYPE SILICON MATERIAL SUBJECTED TO 2-STEP FURNACE ANNEALING

A high-resistivity defect layer buried beneath the silicon surface layer by using proton implantation and two-step conventional furnace annealing is described. During the first annealing step (600-degrees-C), implanted hydrogen atoms move towards the damage region and then coalesce into hydrogen gas bubbles at the residual defect layer. During the second annealing step (1180-degrees-C) these bubbles do not move due to their large volume. Structural defects are formed around the bubbles at a depth of approximately 0.5-mu-m. The defect layer results in a high resistivity value. Experiments show that the quality of the surface layer has been improved because the surface Hall mobility increased by 20%. The sample was investigated by transmission electron microscopy.

DEVELOPMENT OF CURRENT-BASED MICROSCOPIC DEFECT ANALYSIS-METHODS AND ASSOCIATED OPTICAL FILLING TECHNIQUES FOR THE INVESTIGATION ON HIGHLY IRRADIATED HIGH-RESISTIVITY SILICON DETECTORS

Current based microscopic defect analysis methods such as current deep level transient spectroscopy (I-DLTS) and thermally stimulated current (TSC) have been further developed in accordance with the need for the defect analysis of highly irradiated (Phi(n) > 10(13) n/cm(2)) high resistivity silicon detectors. The new I-DLTS/TSC system has a temperature range of 8 K less than or equal to T less than or equal to 450 K and a high sensitivity that can detect a defect concentration of less than 10(10)/cm(3) (background noise as low as 10 fA). A new filling method using different wavelength laser illumination has been applied, which is more efficient and suitable than the traditional voltage pulse filling. It has been found that the filling of a defect level depends on such factors as the total concentration of free carriers generated or injected, the penetration length of the laser (laser wavelength), the temperature at which the filling is taking place, as well as the decay time after the filling (but before the measurement). The mechanism of the defect filling can be explained by the competition between trapping and detrapping of defect levels, possible capture cross section temperature dependence, and interaction among various defect levels in terms of charge transferring. Optimum defect filling conditions have been suggested for highly irradiated high resistivity silicon detectors.

The design of cascaded resistors in a new analog switch two-step ADC architecture

In this paper we introduce a new Half-flash analog switch ADC architecture. And we discuss two methods to design the values of the cascaded resistors which generate the reference voltages. Derailed analysis about the effect of analog switches and comparators on reference voltages, and the methods to set the resistor values and correspond;ng voltage errors are given.

来自易变山羊草抗禾谷孢囊线虫基因的克隆与序列分析

禾谷孢囊线虫（Heterodera avenae）是严重危害禾谷类作物的病原线虫之一,它广泛分布于澳大利亚、欧洲、北美、印度和中国等世界主要小麦产区,使作物严重减产,造成巨大的经济损失。目前最有效的防治措施之一是将外源抗性基因导入栽培小麦(Triticum aestivum L.)，培育抗禾谷孢囊线虫的新品种。但迄今为止抗禾谷孢囊线虫基因克隆研究的相关报道却很少。 本实验根据此前从抗禾谷孢囊线虫材料E-10扩增得到的与来自节节麦（Aegilops tauschii）的抗禾谷孢囊线虫基因Cre3高度同源的序列Rccn4,设计出三条嵌套引物,采用SON-PCR(single oligonucleotide nested PCR)方法,从E-10基因组DNA中得到一个长为1264 bp的扩增产物(命名为Rccn-L),测序比对结果显示,这一序列将Rccn4的3’端延伸了1209 bp,与抗禾谷孢囊线虫Cre3基因核苷酸同源性为86﹪，核苷酸编码区长1026 bp，含一个不完整的开放阅读框,一个终止密码子，没有起始密码子和内含子结构,编码一个342个氨基酸残基的蛋白质。该蛋白质等电点为5.19，分子量为38112.6Da。从序列的第113位开始到第332位是NBS-LRR类抗病性基因LRR区,呈现XXLXXLXXL重复。LRR编码区内亮氨酸残基的含量达17﹪，与抗禾谷孢囊线虫Cre3基因LRR编码区的核苷酸和氨基酸同源性分别为89﹪和78﹪。本实验首次将SON-PCR成功地运用于植物基因克隆，为植物基因克隆提供了又一有效方法。 此外,还根据Cre3基因及其他的NBS-LRR类植物抗性基因的NBS和LRR区保守序列设计了两对特异性引物，从禾谷孢囊线虫抗性材料易变山羊草基因组DNA中扩增到两个相应的目标条带。测序分析结果表明，它们的长度分别为532bp和1175bp，构成了一个有32bp的共同序列的NBS-LRR编码区。其序列总长为1675bp（命名为RCCN），含有一个不完整的开放阅读框，没有起始密码子、终止密码子和内含子结构。其中编码序列为1673bp，可编码一个557个氨基酸的蛋白质，等电点（pI）为5.39，分子量为63537.5Da。与Cre3的核苷酸和氨基酸同源性分别为87.8﹪和77﹪。RCCN氨基酸序列中含有已知抗病基因NBS区域的几个保守模体：kinase2区的ILDD、kinase3的（ⅰ）ESKILVTTRSK，（ⅱ）KGSPLAARTVGG，（ⅲ）RRCFAYCS及EGF。RCCN NBS区与Cre3 NBS区的核苷酸和氨基酸的同源性分别为96.4﹪和94﹪。从氨基酸序列的274位到548位为LRR保守区，呈现不规则的aXXLXXLXXL（其中a代表I，V，L，F或M）重复，其中亮氨酸的含量为15.6﹪。该区域与Cre3的LRR区的核苷酸和氨基酸同源性分别为80.8﹪和74﹪。推测该序列可能为一个抗禾谷孢囊线虫的新基因。 本文对抗禾谷孢囊线虫基因的克隆研究，为进一步克隆基因全序列，探索其结构与功能，和研究该基因表达与调控提供了关键信息。同时也为通过基因工程途径将抗性基因向优良小麦品种高效、定向转移，最终培育出小麦抗禾谷孢囊线虫新品种奠定了基础。 Cereal cyst nematode (CCN) is a damaging pathogen of broad acre cereal crops in Australia, Europe, North America, India and China. It affects wheat, barley, oat and triticale and causes yield loss of up to 80%. At present, Transferring resistance genes against CCN into wheat cultivars and breeding varieties are considered one of the most effective methods for controlling the CCN. However, there are very limited reports concerning the cloning studies of resistance genes against the cereal cyst nematode. According to the sequence of Rccn4 which had high similarity to the nucleotide binding site (NBS) coding region of cereal cyst nematode resistance gene, Cre3， We designed three 3’ nested primers. Using single oligonucleotide nested PCR (SON-PCR) we successfully amplified one band, Rccn-L, of 1264bp from E-10 which is the wheat-Ae.variabilis translocation line containing the cereal cyst nematode resistance gene of Ae.variabilis. We found that this band of interesting is the 3’ flanking sequence of 1209bp in size of Rccn4. The coding region was 1026bp, which contained an incomplete open reading frame and a terminator codon, without initiation codon and intron, encoding a peptide of 342 amino acid residues, and shared 86﹪nucleotide sequence identity with Cre3. This peptide had a conserved LRR domain, containing the imperfect repeats,XXLXXLXXL, which contains 17﹪ leucine residues and shares, respectively, 89﹪ nucleotide sequence and 78﹪ amino acid sequence identity with the LRR sequence of Cre3 locus. This research firstly used SON-PCR in the research of plant genome successfully, which indicated that SON-PCR is another method of cloning plant gene. At the same time, According to the conversed motif of NBS and LRR region of cereal cyst nematode resistance gene Cre3 from wild wheat (Triticum tauschlii L.) and the known NBS-LRR group resistance genes, we designed two pairs of specific primers for NBS and LRR region respectively. One band of approximately 530bp was amplified using the specific primers for conversed NBS region and one band of approximately 1200bp was amplified with the specific primers for conversed LRR region. After sequencing, we found that these two sequences included 32bp common nucleotide sequence and have 1675 bp in total, which was registered as RCCN in the Genbank. RCCN contained a NBS-LRR domain and an incomplete open reading frame without initiation codon, terminator codon and inxon. Its exon encodes a peptide of 557 amino acid residues. The molecular weight of the protein from the amino acid was 63.537 KDa. The amino acid sequence of RCCN contained conserved motif: ILDD, ESKILVTTRSK, KGSPLAARTVGG, RRCFAYCS, EGF，LRR. RCCN shares 87.8﹪ nucleotide sequence and 77﹪ amino acid sequence identity with cereal cyst nematode gene Cre3. It might be a novel cereal cyst nematode resistance gene. These research results of cloning the resistance genes against cereal cyst nematode bring a great promise for transferring resistance genes into wheat cultivars and breeding new wheat varieties against cereal cyst nematode by gene engineering. And these results also lay the hard foundation for the expressing researches of these genes.

A new dual injection system for AMS facility

IEECAS SKLLQG

New results on Xi'an-AMS and sample preparation systems at Xi'an-AMS center

IEECAS SKLLQG

Theoretical study on properties of new isotope (265)Bh

The properties of nuclei belonging to the newly observed a-decay chain starting from (265)Bh have been studied. The axially deformed relativistic mean-field calculation with the force NL-Z2 has been performed in the blocked BCS approximation. Some ground state properties such as binding energies, deformations, spins, and parities, as well as Q-values of the alpha-decay for this decay chain have been calculated and compared with known experimental data. Good agreement is found. The single-particle spectrum of the nucleus (265)Bh is studied and some new magic numbers are found, while the magnitudes of the shell gaps in superheavy nuclei are much smaller than those of nuclei before the actinium region, and the Fermi surfaces are close to the continuum. Thus the superheavy nuclei are usually not stable. The alpha-decay lifetimes in the (265)Bh decay chain are evaluated by different formulae, and compared with experimental data. The methods which give good agreement with the data are selected.

The regional types of China's floating population: Identification methods and spatial patterns

With the rapid increase of the number and influence of floating population in China, it is urgently needed to understand the regional types of China's floating population and their spatial characteristics. After reviewing the current methods for identifying regional types of floating population, this paper puts forward a new composite-index identification method and its modification version which is consisted of two indexes of the net migration rate and gross migration rate. Then, the traditional single-index and the new composite-index identification methods are empirically tested to explore their spatial patterns and characteristics by using China's 2000 census data at county level. The results show: (1) The composite-index identification method is much better than traditional single-index method because it can measure the migration direction and scale of floating simultaneously, and in particular it can identify the unique regional types of floating population with large scale of immigration and emigration. (2) The modified composite-index identification method, by using the share of a region's certain type of floating population to the total in China as weights, can effectively correct the over- or under-estimated errors due to the rather large or small total population of a region. (3) The spatial patterns of different regional types of China's floating population are closely related to the regional differentiation of their natural environment, population density and socio-economic development level. The three active regional types of floating population are mainly located in the eastern part of China with lower elevation, more than 800 mm precipitation, rather higher population densities and economic development levels.

Synthesis and Electrical Properties of New Solid State Electrolyte Materials Ce6-xHoxMoO15-delta(0.0 <= x <= 1.2)

Ce6-xHoxMoO15-delta(0.0 <= x <= 1.2) was synthesized by modified sol-gel method and characterized by differential X-ray diffraction(XRD), Raman, and X-ray photoelectron spectroscopy(XPS) methods. The oxide ionic conductivity of the samples was investigated by AC impedance spectroscopy. It shows that all the samples are single phase with a cubic fluorite structure. The solid solution Ce6-xHoxMoO15-delta(x=0.6) was detected to be the best conducting phase with the highest conductivity(sigma(t)=1.05x10(-2) S/cm) at 800 degrees C and the lowest activation energy(E-a=1.09 eV). These properties suggest that this kind of material has a potential application in intermediate-low temperature solid oxide fuel cells.

A new method of measuring alcohol clusters in polyimide membrane: combination of inverse gas chromatography with equilibrium swelling

A new method of measuring the mean size of solvent clusters in swollen polymer membrane is presented in this paper. This method is based on a combination of inverse gas chromatography (IGC) and equilibrium swelling. The mechanism is that weight fraction activity coefficient of solvent in swollen polymer is influenced by its clusters size. The mean clusters size of solvent in swollen polymer can be calculated as the quotient of the weight fraction activity coefficient of clustering system dividing the weigh fraction activity coefficient of non-clustering system. In this experiment, the weigh fraction activity coefficient of non-clustering system was measured with IGC. Methanol, ethanol and polyimide systems were tested with the new method at three temperatures, 20, 40, and 60degreesC. The mean clusters size of methanol in polyimide was five, four, and three at each temperature condition, respectively. Ethanol did not form clusters (the mean clusters size was one). In contrast to the inherent narrow temperature range in DSC, XRD, and FTIR methods, the temperature range in IGC and equilibrium swelling is broad. Compared with DSC. XRD. and FTIR, this new method can detect the clusters of solvent-polymer system at higher temperature.

Syntheses and crystal structures of four new organotin complexes with Schiff bases containing triazole

Four new organotin complexes, namely [(Bu2Sn)(2)O(EtO)(L1)](2) (1), [(Bu2Sn)(2)O(EtO)(L2)](2) (2), [(Bu2Sn)(2)O(EtO)(L-3)](2) (3) and [Ph3Sn(L4)]center dot 0.5H(2)O (4), were obtained by reactions of Bu2SnO and Ph3SnOH with 4-phenylideneamino-3-methyl-1,2,4-triazole-5-thione (HL1), 4-furfuralideneamino-3-methyl-1,2,4-triazole-5-thione (HL2), 4-(2-thienylideneamino)-3-ethyl-1,2,4-triazole-5-thione (HL3) and 4-(3,5-di-t-butylsalicylideneamino)-3-ethyl-1,2,4-triazole-5-thione (HL4). Compounds 1-4 were characterized by elemental analysis, IR spectra and their structures were determined by single-crystal X-ray diffraction methods. Complexes 1-3 show similar structures containing a Sn4O4 ladder skeleton in which each of the exo tin atoms is bonded to the N atom of a corresponding thione-form deprotonated ligand. Complex 4 shows a mononuclear structure in which the tin atom of triphenyltin group is coordinated by the S atom of a thiol-form L4(-) anion.