49 resultados para Fructose Corn Syrup
Resumo:
Field plots observations indicate that applying polyacrylamide to soil can reduce surface runoff by 18 4%~46 8%,decrease soil erosion by 13%~55%,and increase soil organic matter,alkali-hydrolyzable nitrogen,available phosphate,available potassium in different degrees compared with not application.In addition,applying polyacrylamide can also increase corn yield by 540 5kg·ha -1 ,and net income by 240 5ha.
Resumo:
A method for measuring the long- and medium-term turnover of soil organic matter is described. Its principle is based on the variations of 13C natural isotope abundance induced by the repeated cultivations of a plant with a high 13C/12C ratio (C4 photosynthetic pathway) on a soil which has never carried any such plant. The 13C/12C ratio in soil organic matter being about equal to the 13C/12C ratio of plant materials from which it is derived, changing the 13C content of the organic inputs to the soil (by altering vegetation from C3 type into C4 type) is equivalent to a true labelling in situ of the organic matter. Two cases of continuous corn cultivation (Zea mays: δ13C = −12%.) on soils whose initial organic matter average δ13C is −26%. were studied. The quantity of organic carbon originating from corn (that is the quantity which had turned-over since the beginning of continuous cultivation) was estimated using the 13C natural abundance data. After 13 yr, 22% of total organic carbon had turned-over, in the system studied. Particle size fractions coarser than 50μm on the one hand, and finer than 2μm on the other. contained the youngest organic matters. The turnover rate of silt-sized fractions was slower
Resumo:
采用盆栽试验研究了秸秆配方、废料配方和胶土配方3种改良剂与氮肥配施对玉米植株生长状况、生物量、叶绿素含量、全N及全P含量的影响。结果表明:3种改良剂与0.5 g/盆氮肥配施可以显著提高株高、茎粗、叶面积、地上地下生物量、叶绿素含量及植株全N含量,且以秸秆配方配施效果最佳,过量施用氮肥(1.0 g/盆)时,各指标与0.5 g氮肥水平下的值相比增加幅度甚小,茎粗和地下生物量甚至有下降的趋势。改良剂因素和氮肥因素对全P含量也有一定的影响,但二者交互作用对其并未产生显著性影响。因此,在施加改良剂的条件下可以适当地减少肥料的使用量,在满足植物体吸收利用前提下,既减少了养分投入和浪费,又减轻了对环境的污染。
Resumo:
试验采用室内研究的方法,探讨2种以环境废弃资源为主要原料的新型土壤改良剂的基本水分特性,验证其对玉米苗期的影响。试验结果表明,2种改良剂在不同溶液中溶胀度不同,PJG在蒸馏水中溶胀度最大,PFL则是在自来水中吸水能力最强。PFL的吸水速率要低于PJG,单位质量最大吸水量1.705,为PJG的46.9%。2种改良剂对玉米出苗率的影响不是很明显,但能显著地提高玉米苗期株高和叶面积,对苗期土壤水分的散失也起到了很好的抑制作用。2种改良剂都能明显提高玉米苗期水分利用效率,最优水平分别高于对照27.89%和58.99%。综合各方面结果,建议在玉米试验中使用PJG的最佳浓度为0.8%,PFL为0.05%。
Resumo:
以生活炉渣、建筑废料、生物秸秆等城乡废弃资源为原料,制备一种面向节水农业的环保新产品———土壤扩蓄增容肥.实验结果表明:在棉花苗期,6种土壤扩蓄增容肥配方的节水效果较土对照高300倍,干物质积累增加4.77%~50.00%.6种配方的皮棉产量均比对照高,增产幅度为4.70%~14.25%,纤维物理性状有所改善.产量高低顺序依次是,玉米秸秆>小麦秸秆>生活炉渣>秸秆木炭>建筑废料>煤矸石>CK.利用城乡废弃资源生产的扩蓄增容剂,不仅能改良土壤物理和化学性状,更是棉花增产、优质、节水、降低生产成本的关键技术措施之一,具有显著的生态效益、社会效益和经济效益.
Resumo:
针对单一径流调控措施难以得到较好水土保持效果的问题,本研究通过天然降雨径流、产沙的试验定位观测,对几种措施复合后的次降雨径流、产沙的调控率,及对作物产量的影响做了分析。研究表明:复合措施可以有效地对坡面径流、产沙进行调控,减少坡面径流量和产沙量90%以上,同时提高农作物的产量10%以上。复合措施因其优异的径流、产沙调控能力,增产明显,成本低廉,实施简便,成为一种性价比较高的坡面径流调控模式。
Resumo:
采用开顶式气室(Open Top Chambers)进行水培试验,以两种氮效率玉米(ZeamaysL.)基因型为供试作物,通过不同大气NH3浓度处理,测定苗期各叶绿素荧光动力学参数。结果表明,供氮介质和大气NH3浓度升高对两种氮效率玉米基因型的初始荧光值(Fo)不存在显著影响。高供氮介质下,在NH3浓度升高时,氮高效5号基因型的最大荧光产量(Fm)和可变荧光(Fv)均显著减小(p<0.05),而氮低效基因型四单19的Fm、Fv值显著增加;低供氮介质下,大气NH3浓度升高对2种基因型Fm、Fv值的影响结果与高供氮介质时相反。说明大气NH3浓度升高对生长在高供氮介质下的氮高效5号基因型有一定的抑制作用,而对氮低效基因型四单19有一定程度的促进作用。在不同供氮介质下,大气NH3浓度升高时,两种氮效率玉米基因型的qN、qP值减小,说明大气NH3浓度升高时,作物对光合机构的保护能力比大气背景NH3浓度时弱。
Resumo:
通过喷灌玉米田间试验,研究了喷灌水经玉米冠层再分配后的分布状况。结果表明:在玉米全生育期,茎秆下流水量占灌水量的均值为44%左右,棵间穿透水量占灌水量的均值为48%左右,冠层截留量在0.8 ̄2.9mm之间变化。一次灌水中,喷灌水在地表的分布很不均匀,43.2%的灌水量经茎秆下流到根区,在距离茎秆7cm,15cm,25cm和32.5cm处,地表接收的水量占总灌水量的比例分别为18.9%、43.5%、66.9%和84.5%。灌水量、种植密度、株高和叶面积指数等都影响着喷灌水在地表的分布。
Resumo:
本文依据田间试验数据 ,采用Jensen模式 ,研究了黄土旱区冬小麦、春玉米这两种优势作物的—水分模型 .研究结果表明 ,小麦在播种~返青期缺水敏感指数 (λ)最大 ,对缺水最为敏感 ;拔节~抽穗期次之 ,然后是抽穗~灌浆期 ,而灌浆~成熟期和返青~拔节期的敏感性最小 .总耗水量在 32 0~ 42 0mm之间 ,灌水量为 2 6 0~ 30 0mm左右、且分布在冬前和拔节~抽穗期是节水高产高效的灌水模式 .玉米拔节 -抽穗期和抽穗 -灌浆期对缺水最敏感 ,拔节前和灌浆 -成熟期敏感性小 .说明拔节后到抽穗期补水对产量作用最大 ,其次为抽穗 -灌浆期 .这为黄土旱区制定灌溉制度提供了重要理论依据
Resumo:
通过田间小区试验研究了不同N、P施肥量对玉米生育期土壤微生物量C、N、P的影响。结果表明,不同N、P施肥量对微生物量C无明显影响;施N肥量高(225km/hm~2)时降低微生物量N;当施P肥达225 km/hm~2时则对微生物量P产生明显的抑制作用。
Resumo:
利用田间小区试验研究了不同土壤水分条件下N肥对根系生长(根长、根重和根冠比)的影响。结果表明,玉米拔节期和开花期无论水分条件如何,施N肥可增加其总根长、表层根长和根重并使根冠比下降;灌浆期施N肥可增加总根长和表层根长,但正常水分条件下N肥使根重和根冠比下降,而干旱条件下N肥对根重和根冠比则无影响。不同处理根冠比大小与N吸收和分配有很大关系。
Resumo:
Insulin has been encapsulated in poly(lactic-co-glycolic acid) (PLGA) microspheres by solid-in-oil-in-oil (S/O/O) emulsion technique using DMF/corn oil as new solvent pairs. To get better encapsulation efficiency, insulin nanoparticles were prepared by the modified isoelectric point precipitation method so that it had good dispersion in the inner oil phase. The resulting microspheres had drug loading of 10% (w/w), while the encapsulation efficiency could be up to 90-100%. And the insulin release from the microspheres could last for 60 days. Microspheres encapsulated original insulin with the same method had lower encapsulation efficiency, and shorter release period. Laser scanning confocal microscopy indicated the insulin nanoparticle and original insulin had different distribution in microspheres. The results suggested that using insulin nanoparticle was better than original insulin for microsphere preparation by S/O/O method.
Resumo:
Two-dimensional (2-D) gold networks were spontaneously formed at the air-water interface after HAuCl4 reacted with fructose at 90 degrees C in a sealed vessel, in a reaction in which fructose acted as both a reducing and a protecting agent. Through fine-tuning of the molar ratio of HAuCl4 to fructose, the thus-formed 2-D gold networks can be changed from a coalesced pattern to an interconnected pattern. In the coalesced pattern, some well-defined single-crystalline gold plates at the micrometer-scale could be seen, while in the interconnected pattern, many sub-micrometer particles and some irregular gold plates instead of well-defined gold plates appeared. It is also found that the 2-D gold networks in the form of an interconnected pattern can be used as substrates for surface-enhanced Raman scattering (SERS) because of the strong localized electromagnetic field produced by the gaps between the neighboring particles in the 2-D gold networks.
Resumo:
A novel glucose biosensor based on capacitive detection has been developed using molecularly imprinted polymers. The sensitive layer was prepared by electropolymerization of o-phenylenediamine on a gold electrode in the presence of the template (glucose). Cyclic voltammetry and capacitive measurements monitored the process of electropolymerization. Surface uncovered areas were plugged with 1-dodecanethiol to make the layer dense, and the insulating properties of the layer were studied in the presence of redox couples. The template molecules and the nonbound thiol were removed from the modified electrode surface by washing with distilled water. A capacitance decrease could be obtained after injection of glucose. The electrode constructed similarly but with ascorbic acid or fructose only showed a small response compared with glucose. The stability and reproducibility of the biosensor were also investigated. (C) 2001 Elsevier Science B.V. All rights reserved.
Resumo:
The decomposing process of corn leaf residues (CLR) was studied by FTIR differential analysis,and the differential spectra were compared with normal spectra. The result showed that the purification process to remove inorganic matters from decomposed CLR could be omitted when differential analysis is used, and the differential spectra were cleat and distinct. As far as the studies of decomposed crop residues, the FTIR differential analysis was a convenient and forthright method.