Amperometric tyrosinase biosensor based on a sol-gel-derived titanium oxide-copolymer composite matrix for detection of phenolic compounds

A new type of tyrosinase biosensor was developed for the detection of phenolic compounds, based on the immobilization of tyrosinase in a sol-gel-derived composite matrix that is composed of titanium oxide sol and a grafting copolymer of poly(vinyl alcohol) with 4-vinylpyridine. Tyrosinase entrapped in the composite matrix can retain its activity to a large extent owing to the good biocompatibility of the matrix. The parameters of the fabrication process and the variables of the experimental conditions for the enzyme electrode were optimized. The resulting sensor exhibited a fast response (20 s), high sensitivity (145.5 muA mmol(-1) 1) and good storage stability. A detection limit of 0.5 muM catechol was obtained at a signal-to-noise ratio of 3.

Effect of Particle Size on the Formation of Adiabatic Shear Band In Particle Reinforced Metal Matrix Composites

In this paper, the effect of particle size on the formation of adiabatic shear band in 2024 All matrix composites reinforced with 15% volume fraction of 3.5, 10 and 20 mum SiC particles was investigated by making use of split Hopkinson pressure bar (SHPB). The results have demonstrated that the onset of adiabatic shear banding in the composites strongly depends on the particle size and adiabatic shear banding is more readily observed in the composite reinforced with small particles than that in the composite with large particles. This size dependency phenomenon can be characterized by the strain gradient effect. Instability analysis reveals that high strain gradient is a strong driving force for the formation of adiabatic shear banding in particle reinforced metal matrix composites (MMCp).

Formation of adiabatic shear band in metal matrix composites

A modified single-pulse loading split Hopkinson torsion bar (SSHTB) is introduced to investigate adiabatic shear banding behavior in SiCp particle reinforced 2024 Al composites in this work. The experimental results showed that formation of adiabatic shear band in the composite with smaller particles is more readily observed than that in the composite with larger particles. To characterize this size-dependent deformation localization behavior of particle reinforced metal matrix composites (MMCp), a strain gradient dependent shear instability analysis was performed. The result demonstrated that high strain gradient provides a deriving force for the formation of adiabatic shear banding in MMCp. (C) 2004 Elsevier Ltd. All rights reserved.

Numerical study on rainfall infiltration in rock-soil slop

A mathematical model for the rain infiltration in the rock-soil slop has been established and solved by using the finite element method. The unsteady water infiltrating process has been simulated to get water content both in the homogeneous and heterogeneous media. The simulated results show that the rock blocks in the rock-soil slop can cause the wetting front moving fast. If the rain intensity is increased, the saturated region will be formed quickly while other conditions are the same. If the rain intensity keeps a constant, it is possible to accelerate the generation of the saturated region by properly increasing the vertical filtration rate of the rock-soil slop. However, if the vertical filtration rate is so far greater than the rain intensity, it will be difficult to form the saturated region in the rock-soil slop. The numerical method was verified by comparing the calculation results with the field test data.

Microstructure and high-temperature wear and oxidation resistance of laser clad gamma/W2C/TiC composite coatings on gamma-TiAl intermetallic alloy

There are very strong interests in improving the high-temperature wear resistance of the y-TiAl intermetallic alloy, especially when applied as tribological moving components. In this paper, microstructure, high-temperature dry sliding wear at 600 degrees C and isothermal oxidation at 1000 degrees C on ambient air of laser clad gamma/W2C/TiC composite coatings with different constitution of Ni-Cr-W-C precursor mixed powders on TiAl alloy substrates have been investigated. The results show that microstructure of the laser fabricated composite coatings possess non-equilibrium microstructure consisting of the matrix of nickel-base solid solution gamma-NiCrAl and reinforcements of TiC, W2C and M23C6 carbides. Higher wear resistance than the original TiAl alloy is achieved in the composite coatings under high-temperature wear test conditions. However, the oxidation resistance of the laser clad gamma/W2C/TiC composite coatings is deceased. The corresponding mechanisms resulting in the above behaviors of the laser clad composite coatings are discussed. (c) 2006 Elsevier B.V. All rights reserved.

Photonic nanowires directly drawn from bulk glasses

High-uniform nanowires with diameters down to 50 nm are directly taper-drawn from bulk glasses. Typical loss of these wires goes down to 0.1 dB/mm for single-mode operation. Favorable photonic properties such as high index for tight optical confinement in tellurite glass nanowires and photoluminescence for active devices in doped fluoride and phosphate glass nanowires are observed. Supporting high-index tellurite nanowires with solid substrates (such as silica glass and MgF2 crystal) and assembling low-loss microcoupler with these wires are also demonstrated. Photonic nanowires demonstrated in this work may open up vast opportunities for making versatile building blocks for future micro- and nanoscale photonic circuits and components. (c) 2006 Optical Society of America.

The profound effects of microcystin on cardiac antioxidant enzymes, mitochondrial function and cardiac toxicity in rat

Deaths from microcystin toxication have widely been attributed to hypovolemic shock due to hepatic interstitial hemorrhage, while some recent studies suggest that cardiogenic complication is also involved. So far, information on cardiotoxic effects of MC has been rare and the underlying mechanism is still puzzling. The present study examined toxic effects of microcystins on heart muscle of rats intravenously injected with extracted MC at two doses, 0.16LD(50) (14 mu g MC-LReq kg(-1) body weight) and 1LD(50) (87 mu g MC-LReq kg(-1) body weight). In the dead rats, both TTC staining and maximum elevations of troponin I levels confirmed myocardial infarction after MC exposure, besides a serious interstitial hemorrhage in liver. In the 1LD(50) dose group, the coincident falls in heart rate and blood pressure were related to mitochondria dysfunction in heart, while increases in creatine kinase and troponin I levels indicated cardiac cell injury. The corresponding pathological alterations were mainly characterized as loss of adherence between cardiac myocytes and swollen or ruptured mitochondria at the ultrastructural level. MC administration at a dose of 1LD(50) not only enhanced activities and up-regulated mRNA transcription levels of antioxidant enzymes, but also increased GSH content. At both doses, level of lipid peroxides increased obviously, suggesting serious oxidative stress in mitochondria. Simultaneously. complex I and III were significantly inhibited, indicating blocks in electron flow along the mitochondrial respiratory chain in heart. In conclusion, the findings of this study implicate a role for MC-induced cardiotoxicity as a potential factor that should be considered when evaluating the mechanisms of death associated with microcystin intoxication in Brazil. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

Well-Aligned Zn-Doped InN Nanorods Grown by Metal-Organic Chemical Vapor Deposition and the Dopant Distribution

We report the synthesis and characterization of Zn-doped InN nanorods by metal-organic chemical vapor deposition. Electron microscopy images show that the InN nanorods are single-crystalline structures and vertically well-aligned. Energy-dispersive X-ray spectroscopy analyses suggest that Zn ions are distributed nonhomogenously in InN nanorods. Simulations based on diffusion model show that the doping concentration along the radial direction of InN nanorod is bowl-like from the exterior to the interior, the doping concentration decreases, and Such dopant distribution result in a bimodal EDXS spectrum of Zn across the nanorod. The study of the mechanism of doping effect is useful for the design of InN-based nanometer devices. Also, high-quality Zn-doped InN nanorods will be very attractive as building blocks for nano-optoelectronic devices.'

Evolution of mosaic structure in InN grown by metalorganic chemical vapor deposition

Mosaic structure in InN layers grown by metalorganic chemical vapor deposition at various temperatures has been investigated by X-ray diffraction (XRD). With a combination of Williamson-Hall measurement and fitting of twist angles, it was found that variation of growth temperature from 450 to 550 degrees C leads to the variation of the lateral coherence length, vertical coherence length, tilt and twist of mosaic blocks in InN films in a, respectively, monotonic way. In particular, mosaic tilt increases whereas mosaic twist decreases with elevating temperature. Atomic force microscopy shows the morphological difference of the InN nucleation layers grown at 450 and 550 degrees C. Different coalescence thickness and temperature-dependent in-plane rotation of InN nuclei are considered to account for the XRD results. (c) 2006 Elsevier B.V. All rights reserved.

Enhanced photoresponse from the ordered microstructure of naphthalocyanine-carbon nanotube composite film

Naphthalocyanine-sensitized multi-walled carbon nanotube (NaPc-MWNT) composites have been synthesized through the pi-stacking between naphthalocyanine (NaPc) and carbon nanotubes. The resultant nanocomposites were characterized with a scanning electron microscope (SEM), a transmission electron microscope (TEM), and by UV - vis absorption and photocurrent spectra. The long-range ordering was observed in the NaPc - MWNT composites by using a TEM. The enhancement in the absorption intensity and the broadening of the absorption wavelength observed in the composite films, which were due to the attachment of NaPc on the MWNT surface, is discussed based on the measured UV - vis absorption spectra. Furthermore, the photoconductivity of the poly( 3-hexylthiophene)(PAT6) - NaPc - MWNT composite film was found to increase remarkably in the visible region and broaden towards the red regions. These new phenomena were ascribed to the larger donor/acceptor (D/A) interface and the formation of a biconsecutive D/A network structure, as discussed in consideration of the photoinduced charge transfer between PAT6 and NaPc - MWNT.

毛蕊异黄酮类似物的合成及其对JAK/STAT信号途径调控的构效关系研究

干扰素（IFNs）是最早发现的具有广泛用途的一类细胞因子，IFN-α通过JAK/STAT信号途径调控机体一系列生理和病理反应。至今尚未发现类干扰素的小分子。我们前期研究发现天然产物毛蕊异黄酮可激活干扰素诱导的JAK/STAT信号途径。为发现类干扰素小分子、获得小分子探针，本课题拟建立成熟的JAK/STAT信号途径的筛选模型，合成毛蕊异黄酮及其类似物，研究这些化合物的构效关系，进而尝试通过共价键标记生物素或香豆素来直接研究它们与相关受体的作用。 从异香草醛出发经7步合成反应得到了毛蕊异黄酮。采用平行合成策略得到异黄酮类化合物；采用分支式合成策略，以取代苯乙酸作为合成砌块，获得具有与异黄酮类似结构的香豆素、3-芳基喹诺酮。与分离得到的黄酮类化合物，构建了一个包括异黄酮、黄酮、香豆素、3-芳基喹诺酮在内的化合物库。 建立了包含IFN-α刺激反应元件 (ISRE)的荧光素酶报告基因体系，通过筛选化合物库中的化合物，发现异黄酮骨架为激活JAK/STAT信号途径必须结构、毛蕊异黄酮7-位酚羟基被取代后活性丧失。根据以上结果，对毛蕊异黄酮3′-位标记物的合成进行了初步尝试。 发现山茱萸科植物青荚叶(Helwingia japonica (Thunb.) Dietr.)有抑制蛋白酪氨酸磷酸酯酶1B（PTP1B）的活性。从其地上部分95%乙醇提取物的乙酸乙酯部分分离得到5个化合物,应用波谱方法及与已知品对照的手段鉴定它们为p-menth-2-en-1β, 4β, 8-triol (Z-1)、blumenol A (Z-2)、2′,3′,4′,5′,6′-五羟基查尔酮(Z-3)、洋芹素7-O-β-D-吡喃葡萄糖苷(Z-4)、木犀草素7-O-β-D-吡喃葡萄糖苷(Z-5). Interferons (IFNs) are one kind of cytokines with broad functions. IFN-α mediates series physiological and pathological changes of human body via JAK/STAT pathway. Untill now, no IFNs-like small molecules are discovered. In our preliminary experiment, the natural product calycosin has been observed to activate JAK/STAT pathway. Therefore, we establish a luciferase reporter gene system and synthesize calycosin and its analogues to reveal their structure-activity relationship (SAR). Besides, in order to prove that calycosin activates JAK/STAT pathway through IFN receptor, we attempted to tag it with biotin or coumarin by covalent bonding. Calycosin was synthesized from isovanillin via seven steps. Other isoflavones were obtained by parallel synthesis; coumarins and quinolones were prepared through divergent synthesis, using substituted phenylacetic acids as building blocks. Combing with natural flavones, a small molecule library was established. A luciferase reporter gene system, consisting of 5 copies of the ISRE (interferon-stimulated response element), was used for screening of small molecules from that library. We found that the core-structure of isoflavone was necessary, and if the 7-OH is substituted, the activity slumps. According to our observation, we tried to tag biotin or coumarin at 3′-OH of calycosin. The 95% ethanol extract of the aerial parts of Helwingia japonica (Thunb.) Dietr. showed protein tyrosine phosphatase 1B (PTP1B) inhibitory activity. Five compounds were isolated. On the basis of spectral data or by comparison with authentic samples, they were identified as p-menth-2-en-1β,4β,8-triol (1), blumenol A (2), 2′,3′,4′,5′,6′-pentahydroxychalcone (3), apigenin 7-O-β-D-glucopyranoside (4), and luteolin 7-O-β-D-glucopyranoside (5).

路易斯碱催化还原胺化反应研究

胺及其衍生物是很多重要生物活性分子的结构单元，是合成天然产物和手性药物的重要中间体。 直接还原胺化由于其合成步骤简单而成为制备二级胺和三级胺的简便方法。为了发展一种较为简便的直接还原胺化反应，我们把研究的重点放在开发一种简便实用的有机小分子催化方法上。由文献调研可知，现已报道的直接还原胺化方法大多是催化醛或酮与一级胺或者脂肪二级胺的直接还原胺化，而醛或酮与芳香二级胺的直接还原胺化却尚无报道。在本文中，我们发现用简单的四甲基乙二胺(TEMED)在室温下以二氯甲烷为溶剂即可催化三氯氢硅对酮和芳香二级胺之间的直接还原胺化反应，并取得了高达92%的收率。该反应条件温和，底物普适性广，各种类型的酮均可以与芳香二级胺进行直接还原胺化，并且得到比较满意的收率。 同时，我们从手性Sulfoximine出发，设计和合成了一系列的Sulfoximine类新衍生物，并将其应用于间接还原胺化反应中。遗憾的是我们并没有得到预期的不对称催化效果。 Amines and their derivatives are basic structural motifs in natural products and pharmaceuticals and highly versatile building blocks for various organic substrates. Direct reductive amination (DRA) is a convenient method for the preparation of secondary and tertiary amines owing to its operational simplicity. In an effort to develop a simple and convenient procedure for direct reductive amination reaction, we focused our study on search for a mild and efficient organocatalytic system. In the literature, there are many reports concerning DRA between aldehydes or ketones and either primary amines or secondary aliphatic amines. But there are no reports concerning DRA between aldehydes or ketones and secondary aromatic amines. In this study, we have developed a highly practical method for the synthesis of tertiary amines by the direct reductive amination of ketones and secondary aromatic amines with tetramethylethylenediamine (TEMED) as the catalyst using HSiCl3 as the reducing agent in dichloromethane (affording up to 92% yield). This method can be carried out under mild conditions and is compatible with many functional groups. A variety of ketones were efficiently aminated with secondary aromatic amines to afford the corresponding amines in good to excellent yields. Starting from chiral sulfoximine, we designed and synthesized a series of new sulfoximine derivatives and tested their efficiencies as asymmetric organocatalysts for the reduction of imines, which, unfortunately, only exhibited low catalytic activity and enantioselectivity.

路易斯碱催化的烯胺不对称还原研究

手性胺不仅是许多天然产物和手性药物的重要结构单元，而且也是非常有用的拆分试剂、手性配体和手性催化剂。亚胺和烯胺的不对称催化还原是制备手性胺的最直接有效的方式之一，手性有机小分子催化的亚胺不对称还原已取得了很大的进展，但到目前为止，有机小分子催化的烯胺不对称还原极少见文献报道。 本研究以廉价的三氯氢硅为氢源、DMF 等路易斯碱为催化剂实现了烯胺的高效还原。通过反应条件的优化，各种烯胺底物在0.1 eq. DMF 催化下、12 个小时内可以获得非常高的收率（>93%）。 在本课题组前期研究的基础上，我们筛选并设计了一系列以手性哌啶酸和叔丁基亚磺酰胺为母体的有机小分子路易斯碱催化剂，它们能催化三氯氢硅对(Z)-N-苄氧羰基-1-苯基丙烯胺的不对称还原，获得很高的收率和中等的对映选择性，并且具有很好的底物普适性。另外，通过机理方面的研究，我们推测在反应过程中一分子烯胺先捕获一个质子而转变为亚胺正离子，然后受到路易斯碱活化的三氯氢硅中的富电氢原子进攻该亚胺正离子得到还原产物。 另外，本文列出了在此课题进展中所发现的一些新反应，并且试图去阐释这些反应的作用机理。 Catalytic enantioselective reduction of imines and enamines represents one of the most straightforward and efficient methods for the preparation of chiral amines, which are not only important building blocks of many natrural products and chiral drugs, but also can serve as useful resolution reagents, chiral ligands and chiral catalysts. By now, asymmetric reduction of enamines catalyzed by organocatalysts has scarcely been reported, although organocatalyzed enantioselective reduction of imines has already gained great progress. In this study, we report the DMF-catalyzed reduction of enamines with high yields using HSiCl3 as the reducing agent. Under the optimized reaction conditions, various enamines can be reduced in the presence of 0.1 eq. DMF with high yields (>93%) in 12 hours. We screened a set of Lewis base organocatalysts derived from chiral pipecolinic acid and tert-butanesulfinamide for the reduction of (Z)-N-Cbz-1- phenylpropenamine, including newly designed ones and some of those previously developed in our lab. However, only moderate stereoselectivities, albeit high yields were obtained. As for the mechanism, we speculate that the enamine firstly engages a proton to form an iminium species, which is then attacked by the nucleophlic hydrogen of HSiCl3 activated by Leiws base. During the above studies, we have also discovered some new reactions, for which feasible mechanisms were proposed.

Low-lying states of heavy nuclei within the nucleon pair approximation

In this article we perform systematic calculations on low-lying states of 33 nuclei with A=202-212, using the nucleon pair approximation of the shell model. We use a phenomenological shell-model Hamiltonian that includes single-particle energies, monopole and quadrupole pairing interactions, and quadrupole-quadrupole interactions. The building blocks of our model space include one J=4 valence neutron pair, and one J=4,6,8 valence proton pair, in addition to the usual S and D pairs. We calculate binding energies, excitation energies, electric quadrupole and magnetic dipole moments of low-lying states, and E2 transition rates between low-lying states. Our calculated results are reasonably consistent with available experimental data. The calculated quadrupole moments and magnetic moments, many of which have not yet been measured for these nuclei, are useful for future experimental measurements.

Nafion/PTFE composite membranes for fuel cell applications

Porous polytetrafluoroethylene (PTFE) membranes were used as support material for Nafion((R))/PTFE composite membranes. The composite membranes were synthesized by impregnating porous PTFE membranes with a self-made Nafion solution. The resulting composite membranes were mechanically durable and quite thin relative to traditional perfluorosulfonated ionomer membranes (PFSI); we expect the composite membranes to be of low resistance and cost. In this study, we used three kinds of porous PTFE films to prepare Nafion/PTFE composite membranes of different thickness. Scanning electron micrographs and oxygen permeabilities showed that Nafion resin is distributed uniformly in the composite membrane and completely plug the micropores, there is a continuous thin Nation film present on the PTFE surface. The variation in water content of the composite and Nafion 115 membranes with temperature was determined. At the same temperature, water content of the composite membranes was smaller than that of the Nafion 115. In both dry and wet conditions, maximum strength and break strength of C-325(#) and C-345(#) were larger than those of Nafion 112 due to the reinforcing effect of the porous PTFE films. And the PEMFC performances and the lifetime of the composite membranes were also tested on the self-made apparatus. Results showed that the bigger the porosity of the substrate PTFE films, the better the fuel cell performance; the fuel cell performances of the thin composite membranes were superior to that of Nation 115 membrane; and after 180 h stability test at 500 mA/cm(2), the cell voltage showed no obvious drop. (C) 2002 Published by Elsevier Science B.V.