Concentration effect of Mn2+ on the photoluminescence of ZnS : Mn nanocrystals

Mn-doped ZnS nanocrystals of about 3 nm diameter were synthesized by a wet chemical method. X-ray diffraction (XRD) measurements showed that the nanocrystals have the structure of cubic zinc blende. The broadening of the XRD lines is indicative of nanomaterials. Room temperature photoluminescence (PL) spectrum of the undoped sample only exhibited a defected-related blue emission band. But for the doped samples, an orange emission from the Mn2+ T-4(1)-(6)A(1) transition was also observed, apart from the blue emission. The peak position (600 nm) of the Mn2+ emission was shifted to longer wavelength compared to that (584 nm) of bulk ZnS:Mn. With the increase of the Mn2+ concentration, the PL of ZnS:Mn was significantly enhanced. The concentration quenching effect was not observed in our experiments. Such PL phenomena were attributed to the absence of Mn2+ pairs in a single ZnS:Mn nanocrystal, considering the nonradiative energy transfer between Mn2+ ions based on the Poisson approximation. (c) 2005 Elsevier B.V. All rights reserved.

Investigation of phtoluminesecence under hydrostatic pressure in different sized ZnS : Mn nanoparticles

The PL spectra for the 10, 4. 5, 3. 5, 3, 1 nm sized ZnS:Mn2+ nanoparticles and corresponding bulk material under different pressures were investigated. The orange emission band originated from the T-4(1)-(6)A(1) transition of Mn2+ ions showed obvious red shift with the increasing of pressures. The pressure coefficients of Mn-related emissions measured from bulk, 10, 4. 5, 3.5 and 3 nm samples are -29.4 +/- 0.3, -30.1 +/- 0.3, -33.3 +/- 0.6, -34.6 +/- 0.8 and -39 +/- 1 meV/GPa, respectively. The absolute value of the pressure coefficient increases with the decrease of the size of particles. The size dependence of crystal field strength Dq and Racah parameter B accounts for the size behavior of the Mn-related emission in ZnS:Mn nanoparticles. The pressure behavior of Mn-related emission in the 1 nm sized sample is somewhat different from that of other nanoparticles. It may be due to smaller size of 1 nm sample and the special surface condition since ZnS nanoparticles are formed in the cavities of ziolite-Y for the 1 nm sample.

Photoluminescence of doped ZnS nanoparticles under hydrostatic pressure

The pressure dependence of the photoluminescence from ZnS : Mn2+, ZnS : Cu2+, and ZnS : Eu2+ nanoparticles were investigated under hydrostatic pressure up to 6 GPa at room temperature. Both the orange emission from the T-4(1) - (6)A(1) transition of Mn2+ ions and the blue emission from the DA pair transition in the ZnS host were observed in the Mn-doped samples. The measured pressure coefficients are -34.3(8) meV/GPa for the Mn-related emission and -3(3) meV/GPa for the DA band, respectively. The emission corresponding to the 4f(6)5d(1) - 4f(7) transition of Eu2+ ions and the emission related to the transition from the conduction band of ZnS to the t(2) level of Cu2+ ions were observed in the Eu- and Cu-doped samples, respectively. The pressure coefficient of the Eu-related emission was found to be 24.1(5) meV/GPa, while that of the Cu-related emission is 63.2(9) meV/GPa. The size dependence of the pressure coefficients for the Mn-related emission was also investigated. The Mn emission shifts to lower energies with increasing pressure and the shift rate (the absolute value of the pressure coefficient) is larger in the ZnS : Mn2+ nanoparticles than in bulk. Moreover, the absolute pressure coefficient increases with the decrease of the particle size. The pressure coefficients calculated based on the crystal field theory are in agreement with the experimental results. (C) 2004 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

On the formation of well-aligned ZnO nanowall networks by catalyst-free thermal evaporation method

Two-dimensional ZnO nanowall networks were grown on ZnO-coated silicon by thermal evaporation at low temperature without catalysts or additives. All of the results from scanning electronic spectroscope, X-ray diffraction and Raman scattering confirmed that the ZnO nanowalls were vertically aligned and c-axis oriented. The room-temperature photoluminescence spectra showed a dominated UV peak at 378 nm, and a much suppressed orange emission centered at similar to 590 nm. This demonstrates fairly good crystal quality and optical properties of the product. A possible three-step, zinc vapor-controlled process was proposed to explain the growth of well-aligned ZnO nanowall networks. The pre-coated ZnO template layer plays a key role during the synthesis process, which guides the growth direction of the synthesized products. (C) 2007 Elsevier B.V. All rights reserved.

Role of surface defect states in visible luminescence from oxidized hydrogenated amorphous Si hydrogenated amorphous Ge multilayers

Nanocrystalline Ge embedded in amorphous silicon dioxide matrix was fabricated by oxidizing hydrogenated amorphous Si/hydrogenated amorphous Ge (a-Si:H/a-Ge:H) multilayers. The structures before and after oxidation were systematically investigated. The orange-green light emission was observed at room temperature and the luminescence peak was located at 2.2 eV. The size dependence in the photoluminescence peak energy was not observed and the luminescence intensity was increased gradually with oxidation time. The origin for this visible light emission is discussed. In contrast to the simple quantum effect model, the surface defect states of nanocrystalline Ge are believed to play an important role in radiative recombination process. (C) 1999 American Institute of Physics. [S0003-6951(99)02425-0].

Enhanced photocatalytic activity of TiO2 nano-structured thin film with a silver hierarchical configuration

TiO2 sol-gels with various Ag/TiO2 molar ratios from 0 to 0.9% were used to fabricate silver-modified nano-structured TiO2 thin films using a layer-by-layer dip-coating (LLDC) technique. This technique allows obtaining TiO2 nano-structured thin films with a silver hierarchical configuration. The coating of pure TiO2 sol-gel and Ag-modified sol-gel was marked as T and A, respectively. According to the coating order and the nature of the TiO2 sol-gel, four types of the TiO2 thin films were constructed, and marked as AT (bottom layer was Ag modified, surface layer was pure TiO,), TA (bottom layer was pure TiO,, surface layer was Ag modified), TT (pure TiO, thin film) and AA (TiO, thin film was uniformly Ag modified). These thin films were characterized by means of linear sweep voltammetry (LSV), X-ray diffraction (XRD), scanning electron microscopy (SEM), electrochemical impedance spectroscopy and transient photocurrent (I-ph). LSV confirmed the existence of Ago state in the TiO, thin film. SEM and XRD experiments indicated that the sizes of the TiO,, nanoparticles of the resulting films were in the order of TT > AT > TA > AA, suggesting the gradient Ag distribution in the films. The SEM and XRD results also confirmed that Ag had an inhibition effect on the size growth of anatase nanoparticles. Photocatalytic activities of the resulting thin films were also evaluated in the photocatalytic degradation process of methyl orange. The preliminary results demonstrated the sequence of the photocatalytic activity of the resulting films was AT > TA > AA > TT. This suggested that the silver hierarchical configuration can be used to improve the photocatalytic activity of TiO2 thin film.

Effect of dopant concentration on photocatalytic activity of TiO2 film doped by Mn non-uniformly

The thin films of TiO2 doped by Mn non-uniformly were prepared by sol-gel method under process control. In our preceding study, we investigated in detail, the effect of doping mode on the photocatalytic activity of TiO2 films showing that Mn non-uniform doping can greatly enhance the activity. In this study we looked at the effect of doping concentration on the photocatalytic activity of the TiO2 films. In this paper, the thin films were characterized by UV-vis spectrophotometer and electrochemical workstation. The activity of the photocatalyst was also evaluated by photocatalytic degradation rate of aqueous methyl orange under UV radiation. The results illustrate that the TiO2 thin film doped by Mn non-uniformly at the optimal dopant concentration (0.7 at %) is of the highest activity, and on the contrary, the activity of those doped uniformly is decreased. As a comparison, in 80 min, the degradation rate of methyl orange is 62 %, 12 % and 34 % for Mn non-uniform doping film (0.7 at %), the uniform doping film (0.7 at %) and pure titanium dioxide film, respectively. We have seen that, for the doping and the pure TiO2 films, the stronger signals of open circuit potential and transient photocurrent, the better photocatalytic activity. We also discusse the effect of dopant concentration on the photocatalytic activity of the TiO2 films in terms of effective separation of the photon-generated carriers in the semiconductor. (C) Versita Warsaw and Springer-Verlag Berlin Heidelberg. All rights reserved.

中国蔷薇属芹叶组（Rosa Sect. Pimpinellifoliae DC. ex Ser.）的分类学研究

本研究通过我国CDBI、 KUN、PE、SZ等主要标本馆约3, 500份馆藏标本的研究和野外考察相结合，对我国蔷薇属（Rosa L.）芹叶组(Sect. pimpinellifoliae DC. ex Ser.）植物以及相关组的一些种进行了性状特征、形态和微形态的研究，对该组的一些种的形态特征描述进行了补充，同时给出详细的地理和海拔范围分布图。综合花粉以及种子（瘦果）形态的研究结果重新制订了分种检索表，同时，对该组一些形态相近容易混淆的种进行了对比研究，特别对一直存在争议的绢毛复合体（绢毛蔷薇R. sericea Lindl.和峨眉蔷薇R. omeiensis Rolfe）进行了大量宏观形态特征的研究，并用光学显微镜（LM）和扫描电镜(SEM)对二者的花粉及种子形态、微形态进行对比研究和分析，主要研究内容包括： 1. 芹叶组孢粉研究 对芹叶组的10个种及相关的4个组共17个种（18个样品）的植物花粉进行了光镜和扫描电镜观察和比较研究。研究结果表明：蔷薇属植物花粉粒大小为中等偏小，极轴长23.98[21.82(R. graciliflora Rehd. et Wils.)～29.18(R. tsinglingensis Pax. et Hoffm.)] μm，赤道轴长28.65[24.15（R. graciliflora）～34.70(R. davidii Crép.)] μm；花粉属辐射对称等极单花粉，花粉形态赤道面观呈球形到超长球形；极面观为三裂圆形或近圆形,三孔沟，孔缘加厚,具中部突起的桥状盖。花粉外壁纹饰为条纹状，光镜下形态特征相差不大；在电镜下外壁条纹和脊沟内穿孔的形状、大小和频度等特征，常具组至种水平上的可见变异，可作为组至种水平划分的依据。 根据花粉外壁条纹特征及穿孔形状和数目等特征，本研究将这些植物的花粉归为5个类型，并编制了分组检索表。同时，根据条纹状的清晰度，排列方式、条纹形状、穿孔大小及其频度等方面的差异，各有特点，对该组的10个种编制了分种检索表。 2. 芹叶组种子形态研究 应用光学显微镜和扫描电镜对我国蔷薇属芹叶组14个种及相关组5个组共36种植物的种子宏观形态及种皮微形态特征进行了观察研究。结果显示，蔷薇属种子形态多样,形状分别为肾形、卵形或锥形等；种子颜色以淡棕色、褐色以及土黄色为主；种子大小种间相差悬殊，相对体积为（长×宽×厚）36.66（4.79～114.47) mm3。光镜下，种子宏观形态特征具组内一致性，在扫描电镜下种子表面结构特征因种而异，其纹饰以网纹为主，可分为3种类型，即近平滑型、负网纹型和网纹型。研究结果表明，蔷薇属种子表面纹饰与地理分布关系不大,具有组及种内稳定性。其种子形态、大小、表而纹饰类型等特征可作为蔷薇属组及种水平上的分类依据。 结合蔷薇属花粉形态研究结果，得出蔷薇属种皮微形态特征与花粉外壁纹饰特征相吻合，在代表组及种的特征上具相关性的结论。同时根据种子形态、微形态结构特征的组间区别和种间差异编制了分组及芹叶组14个种的分种检索表。 3. 绢毛蔷薇复合体的研究 通过对大量标本的研究、野外观察以及扫描电镜对绢毛蔷薇复合体的花粉形态和种皮表面结构进行研究，通过对小叶、花粉及种子的形态定量分析结果支持Rowley (1959)的观点，将峨眉蔷薇处理为绢毛蔷薇的一个变种。 综上研究结果得出，蔷薇属植物的小叶片数目、花被基数以及花粉及种子形态等性状是较为稳定的，这些特征可很好的作为分类学依据。 The morphology, pollen exine sculpture and seed coat structure of the species of Rosa sect. Pimpinellifoliae and related sections were studied.About 3,500 herbarium specimens at CDBI, KUN, PE, and SZ were examined. Field work in Sichuan and Yunnan were conducted. Revisions of some species were carried out and a new key to species of sect. Pimpinellifoliae was proposed based on morphology, pollen exine sculpture and seed coat structure, Detailed morphological descriptions, geographical distributions and the altitudinal ranges of some taxa are given. The systematics of the species complex, the Rosa sericea complex (R. sericea Lindl. & R. omeiensis Rolfe), was emphasized. This thesis focused on the following three aspects: 1. Pollen morphology of Rosa sect. Pimpinellifoliae The pollen morphology of 18 samples representing 10 species of the Eurasian Rosa sect. Pimpinellifoliae and 7 additional species of related sections was investigated under LM and SEM. The pollen grains are monadic, actinomorphic, equipolar, medium-sized, spheroidal to perprolate in equatorial view, 3-lobed circular or semi-circular in polar view, crassimarginate, pontoperculate, and with striate exine sculpture. The striate sculpture varies among sections and species. The equatorial axis ranges from 17.97 μm (R. sikangensis) to 29.18 μm (R. tsinglingensis) with an average of 23.98 μm in length, while polar axis varies from 24.15 μm (R. gracilifolra) to 34.70 μm (R. davidii) with an average of 28.65 μm in length. The pollens can be divided into five types based on striate sculpture and a key to the sections sampled was proposed accordingly. The pollen morphology of species of sect. Pimpinellifoliae is more homogeneous and different from other sections sampled and did not support the two-series subdivisions in sect. Pimpinellifoliae. A key is also provided based on characers of pollen morphology among species in sect. Pimpinellifoliae. 2. Seed coat structure of Rosa sect. Pimpinellifoliae The seed coat structure of 39 samples representing 14 species of Rosa sect. Pimpinellifoliae and 12 additional species of related sections was investigated under LE and SEM. The seed relative volume (Length × width × thickness) ranges from 4.79 to 114.47 mm3 with an average of 36.66. mm3. The seeds are reniform, ovate or oblong in shape, with orange-brown, light brown or deep brown color. Seed coat sculpture was reticulate or striate-like reticulate. There was no difference in sculpture character of various speices under LM, while three types of seed coat sculpture were identified under SEM and a key to species based on the seed coat sculpture was provided. The three types of seed coat sculpture were nearly smooth, areolate and reticulate. The study of the seed coat sculpture of same species sampled from different populations showed that characters on the seed coat are stable, and thus the size, shape and seed coat sculpture can be used in species level identification. Interestingly, characters in the seed coat sculpture and the pollen morphology in sect. Pimpinellifoliae are consistent at in specific or sectional levels. A key to the 14 species sampled was given based on seed coat sculpture. 3. The study on Rosa sericea complex The Rosa sericea complex contains R. omeiensis and R. sericea. They are morphologically similar to one another and the systematic status of R. omeiensis has been controversial. In this study we examined large numbers of herbarium specimens of R. omeiensis and R. sericea and conducted field observations in the Hengduan Mts.. We also performed SEM study of pollen morphology and seed coat structure of R. omeiensis and R. sericea. We further carried out intensive morphometric study on the leaflet, pollen, and seed morphology. Our results showed that R. omeiensis should be sunk to be a variety of R. sericea, just as Rowley’s treatment in 1959. In conclusion, the features in the number of leaflet and petal, and the morphological character on pollen and seed are relatively stable. Therefore these characters are very useful in taxon delimition.

微生物法生成辅酶Q10的研究

本文根据我们实验室建立的发酵产物中辅酶Q10定性定量检测方法，筛选得到一株可以代谢产生较多辅酶Q10的野生菌株放射形土壤杆菌(Agrobacterium radiobacter No.50)。 为了提高放射形土壤杆菌的辅酶Q10的产量，本实验利用液体培养研究了单因素对菌株辅酶Q10产量的影响，并用正交法确定了最佳液态发酵条件。最佳发酵培养基是：葡萄糖20g,蔗糖40g, 硫酸铵10g,玉米浆30g, 酵母膏3g，K2HPO4 3g,MgSO4.7H2O 1g，蒸馏水1000mL,pH 7.0-7.2。最佳发酵条件是：转接斜面菌种到种子培养基, 转速220r/min、温度28。C培养24h后，转入发酵培养基(250mL三角拼装液量为50mL，pH 7.0), 接种量为10％，转速220r/min、温度28。C，培养120h。在此条件下，菌体湿重约为50g/L，辅酶Q10含量约为20mg/L。 本文以放射形土壤杆菌为出发菌株进行诱变育种，以期获得辅酶Q10高产菌。根据微生物育种原理、参照辅酶Q10的代谢调控机制，以野生型放射形土壤杆菌(Agrobacterium radiobacter No.50)为出发菌株，采用紫外线和亚硝基胍复合诱变技术，依次筛选得到菌体提取物M抗性菌ARM－7、烟草提取物T抗性菌株ARMT-26、Vk3抗性菌株ARMTV-25、链霉素抗性菌株ARMTVS-32，菌株ARMTVS-32产量达到了36.8mg/L，与原始出发菌株相比，产量提高了77％。 研究了茄尼醇、对羟基苯甲酸、橘子皮提取物D、胡萝卜提取物E、烟草提取物对ARMTVS-32合成辅酶Q10的影响，结果表明这些物质对菌体合成辅酶Q10有一定促进作用，添加0.2g/L茄尼醇时，辅酶Q10含量提高了17%，达到了40.7mg/L；添加1.2g/L橘子皮提取物D时，辅酶Q10含量提高了13.8%，达到了39.6mg/L；添加0.5g/L胡萝卜提取物E时，辅酶Q10含量提高了25.3% ，达到了43.6mg/L；添加8g/L烟草提取物时，辅酶Q10含量提高了12.6%，达到了39.2mg/L。 Production of Coenzyme- Q10 (CoQ10) by fermentation is considered as a process with broad prospects.Quantitative Analysis of CoQ10 in the culture of microbe by TLC—UV spectrophotometry was developed, by using this method we got the strain Agrobacterium radiobacter,which was isolated from forest soil of southwest of China. The effect of the single factor on CoQ10-production ability of the strain was examined by liquid cultured, and its best optimum cultivation conditions were established by orthogonal method. The results showed that the optimum fermentation conditions were as following: carbon sources glucose 20g/L,sucrose 40g/L; nitrongen sources (NH4)2SO4 10g/L,maize liquid 30g/L;yeast extract 3g; K2HPO4 3g/L,MgSO4.7H2O 1g/L; initial pH was 7 and volume of medium(medium volume vs flask volume) was 50mL/500mL, incubating for 120h on a rotary shaker at 220 rpm and 28℃.Under these conditions, the biomass and CoQ10 concentration reached 50g/L and 20mg/L respectively. According to the biosynthesis mechanism of CoQ10 and breeding theory, CoQ10 over-production strains were screened by UV--NTG. mutation using Agrobacterium radiobacter No.50 as parent strain. A microbe-juice resistant mutant ARMTVS-32, which also could resist tobacco-juice, VK3 and streptomycin, was screened out from an agar plate. The CoQ10 content of ARMTVS-32 reached 36.8mg/L, which was 77% higher than the initial strain. In addition, We discussed the effects of some organic substrates on the synthesis of CoQ10 in ARMTVS-32. The results showed that solanesol, orange juice D, carrot juice E and tobacco juice could promote the CoQ10 accumulation in the cells. The CoQ10 content of ARMTVS-32 reached 40.7mg/L when added 0.2g/L solanesol,it reached 39.6mg/L when added 1.2g/L orange juice D，it reached 43.6mg/L when added 0.5g/L carrot juice E. it reached 39.2mg/L when added 8g/L tobacco juice.

Multicolor Tuning of Manganese-Doped ZnS Colloidal Nanocrystals

In this paper, we report a facile route which is based Oil tuning doping concentration of Mn2+ ions in ZnS nanocrystals, to achieve deliberate color modulation from blue to orange-yellow under single-wavelength excitation. X-ray diffraction (XRD), transmission electron microscopy (TEM), as well as photoluminescence (PL) spectra were employed to characterize the obtained samples. In this process, the relative emission intensities of both ZnS host (blue) and Mn2+ dopant (orange-yellow) are sensitive to the Mn2+ doping concentration, due to the energy transfer from ZnS host to Mn2+ dopant. As a result of fine-tuning of these two emission components, white emission can be realized for Mn2+-doped ZnS nanocrystals. Furthermore.

Tunable Luminescence in Monodisperse Zirconia Spheres

In this article, monodisperse spherical zirconia (ZrO2) particles with a narrow size distribution were prepared by the controlled hydrolysis of zirconium butoxide in ethanol, followed by heat treatment in air at low temperature from 300 to 500 degrees C. X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, thermogravimetric and differential thermal analysis (TG/DTA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), photoluminescence (PL) spectra, kinetic decay, and electron paramagnetic resonance were used to characterize the samples. The experimental results indicate that the annealed ZrO2 samples exhibit broad, intense visible photoluminescence. The annealing temperature is indispensable for the luminescence of the obtained ZrO2 particles. The emission colors of the ZrO2 samples can be tuned from blue to nearly white to dark orange by varying the annealing temperature.

Synthesis, characterization, photophysics and electrophosphorescent applications of phosphorescent platinum cyclometalated complexes with 9-arylcarbazole moieties

A series of cyclometalating platinum(II) complexes with substituted 9-arylcarbazolyl chromophores have been synthesized and characterized. These complexes are thermally stable and most of them have been characterized by X-ray crystallography. The phosphorescence emissions of the complexes are dominated by (MLCT)-M-3 excited states. The excited state properties of these complexes can be modulated by varying the electronic characteristics of the cyclometalating ligands via substituent effects, thus allowing the emission to be tuned from bright green to yellow, orange and red light. The correlation between the functional properties of these metallophosphors and the results of density functional theory calculations was made. Because of the propensity of the electron-rich carbazolyl group to facilitate hole injection/transport, the presence of such moiety can increase the highest occupied molecular orbital levels and improve the charge balance in the resulting complexes relative to the parent platinum(II) phosphor with 2-phenylpyridine ligand.

Tunable luminescence properties of CaIn2O4 : Eu3+ phosphors

CaIn2O4:Eu3+ phosphors were prepared by a Pechini so-gel process. X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), photoluminescence (PL), cathodoluminescence (CL) spectra as well as lifetimes were utilized to characterize the samples. The XRD results reveal that the samples begin to crystallize at 800 degrees C, and the crystallinity increases upon raising the annealing temperature. The FE-SEM images indicate that the CaIn2O4:Eu3+ samples consist of fine and spherical grains with size around 200-400 nm. Under the excitation of ultraviolet light and low-voltage electron beams, the CaIn2O4:Eu3+ phosphors show the characteristic emissions of Eu3+ ((DJ-7FJ ')-D-5 J, J ' = 0, 1, 2, 3 transitions). The luminescence color can be tuned from white to orange to red by adjusting the doping concentration of EU3+. The corresponding luminescence mechanisms have been proposed.

Harvesting Excitons Via Two Parallel Channels for Efficient White Organic LEDs with Nearly 100% Internal Quantum Efficiency: Fabrication and Emission-Mechanism Analysis

By incorporating two phosphorescent dyes, namely, iridium(III)[bis(4,6-difluorophenyl)-pyridinato-N,C-2']picolinate (Flrpic) for blue emission and bis(2-(9,9-diethyl-9H-fluoren-2-yl)-1-phenyl-1 H-benzoimidazol-N,C-3) iridium(acetylacetonate) ((fbi)(2)Ir(acac)) for orange emission, into a single-energy well-like emissive layer, an extremely high-efficiency white organic light-emitting diode (WOLED) with excellent color stability is demonstrated. This device can achieve a peak forward-viewing power efficiency of 42.5 lm W-1, corresponding to an external quantum efficiency (EQE) of 19.3% and a current efficiency of 52.8 cd A(-1). Systematic studies of the dopants, host and dopant-doped host films in terms of photophysical properties (including absorption, photoluminescence, and excitation spectra), transient photoluminescence, current density-voltage characteristics, and temperature-dependent electroluminescence spectra are subsequently performed, from which it is concluded that the emission natures of Flrpic and (fbi)(2)Ir(acac) are, respectively, host-guest energy transfer and a direct exciton formation process. These two parallel pathways serve to channel the overall excitons to both dopants, greatly reducing unfavorable energy losses.

Highly efficient single-emitting-layer white organic light-emitting diodes with reduced efficiency roll-off

By codoping blue and orange phosphorescent dyes into a single host material, a highly efficient white organic light-emitting diode (WOLED) with Commission Internationale de L'Eclairage coordinates of (0.38, 0.43) at 12 V is demonstrated. Remarkably, this WOLED achieves reduced current efficiency roll-off, which slightly decreases from its maximum value of 37.3-31.0 cd/A at 1000 cd/m(2). The device operational mechanism is subsequently investigated in order to unveil the origin of the high performance.