PPO作为PPO-PDMS-PHS_n/PS增容剂的研究

导了一种新的共混增容体系，以均聚物ＰＰＯ作为不相容共混体系ＰＰＯ－ＰＤＭＳ－ＰＨＳ／ＰＳ的增容剂。ＤＳＣ和ＤＭＡ的研究结果表明，ＰＰＯ对ＰＰＯ－ＰＤＭＳ－ＰＨＳ／ＰＳ共混体系确有增容作用，ＰＰＯ的含量在１３．５％以下时，ＰＳ、ＰＰＯ和ＰＰＯ－ＰＤＭＳ－ＰＨＳ中的硬段相容为一相；ＰＰＯ的含量在２３．８％以上时，ＰＰＯ分布在ＰＳ相和ＰＰＯ－ＰＤＭＳ－ＰＨＳ中的硬段相中，经ＰＰＯ增容后，材料的拉伸性能明显提高。

PPO-PDMS-PHS_n三元多嵌段共聚物的形态结构和性能

利用DMA,TEM和SAXS对以聚苯醚(PPO)为硬段、聚对羟基苯乙烯(PHS)为半硬段和聚二甲基硅氧烷(PDMS)为软段的三元多嵌段共聚物(?)PPO-PDMS-PHS(?)_n的形态结构和性能进行了研究.结果表明,(?)PPO-PDMS-PHS(?)_n以三种嵌段相容相为连续相,PPO与PHS的相容相和PDMS相为两种分散相,其tanδ随温度变化曲线在-100℃至200℃一直是一很高的平台,并具有优异的力学性能,较好地解决了含有机硅类嵌段共聚物强度低的弱点,同时又保留了嵌段共聚物微相分离的特性.

Determination of hydroxylamine by capillary electrophoresis electrochemical detection with a palladium-particle modified carbon fiber microdisk array electrode

A highly dispersed ultramicro palladium-particle modified carbon fiber microdisk array electrode (Pd-CFE) was employed for capillary electrophoresis-electrochemical (CEEC) detection of hydroxylamine (HA). The Pd particles obtained were in the nanometer scale, had a high electrocatalytic activity towards HA and exhibited good reproducibility and stability. A linear relationship between the current and the analyte concentration was found between 5 x 10(-6) and 1 x 10(-3) mol/l of HA with a correlation coefficient of 0.9992. The detection limit was 5 x 10(-8) mol/l. The applicability of the method for the determination of HA in river water and waste water was investigated.

[PSF-PDMS-PHS]_n/PSF共混物的相容性及表面组成

利用ＤＳＣ、ＤＭＡ、ＴＥＭ和ＸＰＳ对［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ／ＰＳＦ共混物的相容性及表面组成进行了研究．结果表明，ＰＤＭＳ在共混物表面的富集与ＰＳＦ均聚物和［ＰＳＦ－ＰＤＭＳ－ＰＨＳ］ｎ中硬段的相容性有关；ＰＤＭＳ在相容的共混物体系表面的富集与对应的多嵌段共聚物组成基本相近；不相容共混物体系表面ＰＤＭＳ的富集程度相对较高，当共混物本体中有机硅含量从１％增至５％，表面层ＰＤＭＳ的含量迅速增加，可达到嵌段共聚物中ＰＤＭＳ的含量．

Determination of isoniazid and hydrazine by capillary electrophoresis with amperometric detection at a Pt-particle modified carbon fiber microelectrode

Capillary electrophoresis (CE)/electrochemical detection (EC) for the simultaneous determination of hydrazine and isoniazid has been developed. The electrochemical method uses a novel modified electrode dispersed with ultrafine platinum particles on the surface of a 30 mu m carbon fiber microelectrode. The unique characteristic of the Pt-particles modified carbon fiber microelectrode is its excellent stability. The current measurement for hydrazine is more sensitive than that of isoniazid. Selective determination of trace amount of free hydrazine in isoniazid and its formulation can be achieved at applied potential of 0.5 V.

Electrochemical study of isopoly- and heteropoly-oxometallates film modified microelectrodes .6. Preparation and redox properties of 12-molybdophosphoric acid and 12-molybdosilicic acid modified carbon fiber microelectrodes

The redox behaviours of 12-molybdophosphoric acid (12-MPA) and 12-molybdosilicic acid (12-MSA) in aqueous acid media are characterized at the carbon fiber (CF) microelectrode. The preparation of CF microelectrode modified with 12-MPA or 12-MSA monolayer and the oxidation-reduction properties of the modified electrode in aqueous acid media or 50% (v/v) water-organic media containing some inorganic acids are studied by cyclic voltammetry. 12-MPA or 12-MSA monolayer modified CF microelectrode with high stability and redox reversibility in aqueous acidic media can be prepared by simple dip coating. The cyclic voltammograms of 12-MPA and 12-MSA and their modified CF microelectrodes in aqueous acid solution exhibit three two-electron reversible waves with the same half-wave potentials, which defines that the species adsorbed on the CF electrode surface are 12-MPA and 12-MSA themselves. The acidity of electrolyte solution, the organic solvents in the electrolyte solution, and the scanning potential range strongly influence on the redox behaviours and stability of 12-MPA or 12-MSA monolayer modified electrodes. On the other hand, the catalytic effects of the 12-MPA and 12-MSA and chlorate anions in aqueous acidic solution on the electrode reaction processes of 12-MPA or 12-MSA are described.

Enhanced glass fiber-reinforced phenolphthalein poly(ether ketone) composites by blending poly(phenylene sulfide)

The mechanical properties of glass fiber-reinforced phenolphthalein poly(ether ketone)/poly(phenylene sulfide) (PEK-C/PPS) composites have been studied. The morphologies of fracture surfaces were observed by scanning electron microscope. Blending a semicrystalline component, PPS, can improve markedly the mechanical properties of glass fiber-reinforced PEK-C composites. These results can be attributed to the improvement of fiber/matrix interfacial adhesion and higher fiber aspect ratio. (C) 1996 John Wiley & Sons, Inc.

含有机硅三元多嵌段共聚物的研究──Ⅱ．（PSF－PDMS－PHS）_n的动态力学性能研究

以双酚Ａ聚砜（ＰＳＦ）为硬段、聚对羟基苯乙烯（ＰＨＳ）为半硬段、聚二甲基硅氧烷（ＰＤＭＳ）为软段合成了三元多嵌段共聚物，并对其动态力学性能和抗张性能进行了比较详细的研究，结果表明该三元多嵌段共聚物为多相结构；在引入半硬段ＰＨＳ后两相间的界面相增宽，粘接力增大，其强度和模量高且稳定，使含有机硅高分子材料强度低的弱点得以改善。扭辩分析（ＴＢＡ）结果显示，这种三元多嵌段共聚物具有多重转变，且在－２０℃至５０℃间有两个较大的几乎重叠的吸收峰；这表明这种三元多嵌段共聚物的相分离结构较为复杂，并有良好的阻尼性能。

DETERMINATION OF HYDRAZINES BY CAPILLARY ZONE ELECTROPHORESIS WITH AMPEROMETRIC DETECTION AT A PLATINUM PARTICLE-MODIFIED CARBON-FIBER MICROELECTRODE

A novel modified electrode dispersed with ultrafine platinum particles on the surface of a 30-mu m carbon fibre microelectrode was investigated as an amperometric detector in capillary zone electrophoresis (CEEC) for determining hydrazines. The unique cha

DIRECT-INJECTION OF URINE AND DETERMINATION OF ACETAMINOPHEN BY MICELLAR LIQUID-CHROMATOGRAPHY WITH A WALL-JET CELL CARBON-FIBER MICROELECTRODE

A wall-jet cell/carbon fibre microelectrode detector was designed and used for the micellar liquid chromatographic assay of acetaminophen. The separations were carried out in an analytical column packed with C-18 stationary phase and the mobile phase was

STRUCTURE AND PROPERTIES OF POLYVINYL-ALCOHOL AMIDOXIME CHELATE FIBER

Polyvinyl alcohol amidoxime (PVAAO) chelate fiber prepared in our laboratory is a good adsorbent. Comparing with other adsorbents, it has many advantages, such as higher hydrophilicity, better adsorbability and easier synthesis. In this work, the synthesi

ELECTROCHEMICAL STUDY OF ISOPOLY-OXOMETALLATE AND HETEROPOLY-OXOMETALLATE FILM MODIFIED MICROELECTRODES .2. ELECTROCHEMICAL-BEHAVIOR OF ISOPOLYMOLYBDIC ACID MONOLAYER MODIFIED CARBON-FIBER MICROELECTRODES

In this paper the electrochemical properties of isopolymolybdic anion thin film modified carbon fibre (CF) microelectrode prepared by simple dip coating have been described. The modified electrode shows three couples of surface redox waves between + 0.70 and - 0.1 V vs. sce in 2 M H2SO4 solution with good stability and reversibility. The pH of solution has a marked effect on the electrochemical behaviour and stability of the film, the stronger the acidity of electrolyte solution is, the better the stability and reversibility of isopolymolybdic anion film CF microelectrode will be. The scanning potential range strongly influences on the electrochemical behaviour of the film. The isopolymolybdic anion film prepared by the dip coating resulting a monolayer with estimated surface concentration (F) 2.8 x 10(-11) mol cm-2. From the half-peak widths and peak areas of the surface redox waves of the film electrode, the first three surface waves are corresponding to two-electron processes. The electron energy spectra show the products by six electrons reduction are a mixture of Mo(VI) and Mo(V) species. The electrochemical reaction of the isopolymolybdic anion monolayer can be expressed as Mo8O264- + mH+ + 2ne half arrow right over half arrow left [HmMo8-2n(VI)Mo2n(V)O26](4,2n-m)-n = 1, 2, 3; m = 2, 5, 7.

RELATIONSHIP BETWEEN CRYSTALLIZATION OF THE PDMS BLOCK AND MORPHOLOGY OF POLY(BUTADIENE-B-DIMETHYLSILOXANE)

Studies using transmission electron microscopy, differential scanning calorimetry, and X-ray diffraction showed correlations between the crystallization behavior of the polydimethylsiloxane (PDMS) block and the morphology of the block copolymer poly (butadiene-b-dimethylsiloxane) (PB-PDMS). When the PDMS component existed as spheres dispersed in a PB matrix, the crystallization rate of the PDMS block was lower than when the PDMS phase existed in rod or cylinder form.

ELECTROCHEMICAL STUDY OF ISOPOLYOXOMETALLATES AND HETEROPOLYOXOMETALLATES FILM MODIFIED MICROELECTRODES .1. PRETREATMENT AND MODIFICATION OF THE MO80-26(4-) MODIFIED CARBON-FIBER MICROELECTRODE

In this paper the preparation of isopoly- and heteropolyoxometallates (IPA and HPA) thin film modified carbon fiber (CF) microelectrodes and the factor that influences the modification of IPA and HPA films are described. IPA and HPA film modified CF microelectrodes can all be prepared by cyclic potential scan and simple dip coating. The modified electrodes prepared are very stable and reversible in acidic solution with monolayer characteristics. The electrochemical pretreatment of CF microelectrodes plays an important role in the modification of IPA and HPA film. The absorption of IPA and HPA film on electrode surfaces has been discussed on the basis of surface conditions of the CF microelectrode and the structure of IPA and HPA.