Preparation of W-Al alloys by mechanical alloying

W1-xAlx (x=0-0.86) alloys were synthesized by mechanically alloying the pure metal powder mixtures at designated compositions by conventional high-energy ball milling. The W-Al alloys were stable under high pressure and high temperature. The alloys were lighter than W. The hardness and oxidation resistance of the alloys was greatly improved compared to both W and Al. (C) 2002 Elsevier Science B.V. All rights reserved.

Vacuum ultraviolet optical properties of (La,Gd)PO4 : RE3+ (RE = Eu, Tb)

Vacuum ultraviolet excitation spectra of phosphors (La,Gd)PO4:RE3+ (RE = Eu or Tb) and X-ray photoelectron spectra of LaPO4 and GdPO4 are investigated. The vacuum ultraviolet excitation intensity of (La,Gd)PO4:RE3+ is enhanced with the increasing of Gd3+ content, which implies that Gd3+ plays an intermediate role in energy transfer from host absorption band to RE3+. When Gd3+ is doped into LaPO4:Eu, charge transfer band (CT band) begins to shift to higher energy region and the overlap degree of CT band and the host absorption band gets greater with more Gd3+ doped into LaPO4. These results suggest that the dopant (Gd3+) gives an important influence on energy transfer efficiency. The top of LaPO4 valance band is formed by the 2p level of O2-, whereas that of GdPO4 valance band is formed by the 2p level of O2- and the 4f level of Gd3+, showing the differences in band structures between LaPO4 and GdPO4.

Carbon ceramic electrodes bulk-modified with nanoparticles of ferrocenebutyrate-intercalated Mg-Al layered double hydroxide

Ferrocenebutyrate-intercalated layered double hydroxide (FcLDH) was prepared by the coprecipitation method and characterized by PXRD, FTIR, TEM and elemental analysis. FcLDH nanoparticles in deionized water were deposited onto the surface of graphite powder to yield graphite powder-supported FcLDH, which was subsequently dispersed into methyltrimethoxysilane-derived gels to fabricate surface-renewable, stable, rigid carbon ceramic electrodes containing the electroactive ferrocenyl group. Cyclic voltammetric study revealed that peak currents of the FcLDH-modified electrode were diffusion-con trolled in 0.1 mol l(-1) KCl aqueous solution. In addition, the formal potential of the modified electrode is related to the activity of chloride ion with a Nernst slope of 56 mV per decade.

Gd3+ -> Eu2+ energy transfer in BaLiF3 : Eu, Gd

Photoluminescence characteristics and the energy transfer between Gd3+ and Eu2+ in BaLiF3,, matrix have been investigated. A series of concentrations of Gd3+ ion with a fixed Eu2+ concentration doped in BaLiF3 : Gd3+, Eu2+ has been studied. When the doping concentration for Gd3+ was 0.3%,, the system reached the highest energy transfer efficiency. Due to the competitive absorption for the Gd3+ and the Eu2+ ions in BaLiF3 : Gd3+ : Eu2+, when the doping concentration for Gd3+ ion exceeded 0.3 Vo, the continuously increasing concentration of Gd3+ ions caused the competitive absorption ratio for Gd3+ increasing and the emission intensity of Eu2+ decreasing. The energy transfer processes were discussed, while the transfer probability was calculated to be 1.35 X 10(5) s(-1).

A novel way to enhance electroluminescence performance based on soluble binary and ternary europium 1,1,1-trifluoroacetylacetonate

Five rare earth complexes (Gd(acae)(3), Gd(TFacaC)(3), Eu(acaC)(3), Eu(TFacaC)(3) and Eu(TFacaC)(3)bipy; acac, acetylacetone; TFacac, 1,1,1-trifluoroacetylacetone; bipy, 2,2'-bipyridyl) were synthesized. By comparing the phosphorescence spectra of Gd(acac)(3) and Gd(TFacac)(3) the effect of the replacement of hydrogen by fluorine was examined. Organic light-emitting devices (OLEDs) based on the corresponding europium complexes as emissive layers were also fabricated by the spin-coating method. The triple-layer-type device with the structure glass substrate/ITO (indium-tin oxide)/PVK [poly(N-vinylcarbazole)]/(PVKEu)-Eu-.(TFacac)(3)bipy:PBD[2-(4-bibipyyl)-5-(4-t-butylbipyl-1,3,4-oxadiazole)]/PBD/Al (aluminum) exhibits a brighter red luminescence than those devices with Eu(acac)(3) and Eu(TFacac)(3) complexes as emissive centers upon applying a d.c. voltage.

High-temperature and high-pressure extraction of Ln(n)@C-2n(Ln=Y,Gd,Tb)

A high temperature and high pressure method was used to efficiently and selectively extract metallofullerenes Ln(m)@C-2n,(Ln = Y, Gd, Tb) in a closed stainless steel autoclave under inert gas protection. 1, 2, 3-Trichlorobenzene was found to be more effective and selective for the extraction of Ln@C-82 (Ln=Y, Gd, Tb) from empty fullerenes and other metallofullerene species.

Sol-gel deposition and luminescent properties of oxyapatite Ca-2(Y,Gd)(8)(SiO4)(6)O-2 phosphor films doped with rare earth and lead ions

Rare-earth and lead ions (Eu3+, Tb3+, Dy3+, Pb2+) doped Ca2Y8 (SiO4)(6)O-2 and Ca2Gd8(SiO4)(6)O-2 thin films have been dip- coated on silicon and quartz glass substrates through the sol- gel route. X- Ray diffraction (XRD), TG- DTA, scanning electron microscopy (SEM), atomic force microscopy (AFM), FT- IR and luminescence excitation and emission spectra as well as luminescence decays were used to characterize the resulting films. The results of XRD reveal that these films remain amorphous below 700 degreesC, begin to crystallize at 800 degreesC and crystallize completely around 1000 degreesC with an oxyapatite structure. The grain structure of the film can be seen clearly from SEM and AFM micrographs, where particles with various shapes and average size of 250 nm can be resolved. Eu3+ and Tb3+ show their characteristic red (D-5(0)-F-7(2)) and green (D-5(4) - F-7(5)) emission in the films with a quenching concentration of 10 and 6 mol% (of Y3+), respectively. The lifetime and emission intensity of Eu3+ increase with the temperature treatment from 700 to 1100 degreesC, while those of Tb3+ show a maximum at 800 degreesC. Energy transfer phenomena have been observed by activating the oxyapatite film host- lattice Ca2Gd8(SiO4)(6)O-2 with Tb3+ (Dy3+). In addition, Pb2+ can sensitize the Gd3+ sublattice in Ca2Gd8(SiO4)(6)O-2.

BaLiF_3∶Eu,Gd中Gd~(3+)→Eu~(2+)的能量传递

研究了 Ba Li F3中 Gd3+和 Eu2 +的光谱性质及 Gd3+对 Eu2 +的能量传递过程 ,讨论了传递机理 .Gd3+的含量 (物质的量分数 )为 0 .3 %时 ,传递效率最高 ,传递几率 PSA=1 .3 5× 1 0 5s- 1 .当 Gd3+的含量高于 0 .3 %时 ,由于 Gd3+ 和 Eu2 + 竞争吸收 Gd3+ 占优势 ,增加 Gd3+ 含量 ,竞争吸收比相应增加 ,Eu2 + 自身吸收光子数目减少 ,发射强度降低

PDP用荧光粉的真空紫外辐照特性

利用“等离子体显示用荧光粉光学测试系统”中147nm真空紫外光,对实用的（Y,Gd）BO_3:Eu红粉,Zn_2SiO_4:Mn和（Ba,Sr,Mg）O·nAl_2O_3:Mn绿粉以及（Ba,Mg）O·nAl_2O_3:Eu~(2+)蓝粉进行较长时间的辐照,以观察荧光粉的衰减特性,发现红粉衰减最小,蓝粉初始衰减较快,而绿粉亮度存在一个先升后降的现象。

高温高压法提取金属富勒烯Ln_m@C_(2n)(Ln=Y,Gd,Tb)

笼内金属富勒烯以其独特的结构性质和潜在的应用价值而引起了人们极大的注意 [1～ 3] ,但因制备技术复杂、产率低以及将其从伴生的空心富勒烯中分离出来比较困难而使其研究受到很大的限制 .笼内金属富勒烯的分离提取始终是金属富勒烯研究的一个重要分支 .通常的方法是将放电得到的烟炱采用甲苯索氏提取的方法粗提 ,然后用高压液相色谱法分离得到纯品 ,笼内金属富勒烯的产率仅为烟炱的 0 .1 % [4～ 6] .我们改进了常规的提取方法 ,建立了一种新的提取方法—高温高压提取法 .具体的做法是采用甲苯索氏提取法从烟炱中提取出空心富勒烯和少量金属富勒烯 ,对剩余物用 1 ,2 ,4-氯苯高温高压法提取 .笼内金属富勒烯的产率增大了 5倍 ( 0 .5 % ) ,这一结果目前尚未见文献报道 .1　实验部分1 .1　金属富勒烯的合成　笼内金属富勒烯 Lnm@C2 n( Ln=Y,Tb,Gd)采用电弧放电法 ,在自制的一套电弧放电器中合成 .将 8mm× 2 0 0 mm的光谱纯级石墨棒钻出 5 mm× 1 5 0 mm的深孔 ,充填经预先处理的各种稀土氧化物和石墨粉的混合物 ,混合物中稀土原子和碳原子物质的量比为 1∶ 5 ...

三(环戊基茚基)钐配合物(C_5H_9C_9H_6)_3SmCl~-Li~+(THF)_4的合成与晶体结构

稀土配合物能使极性和非极性单体聚合[1] .虽然目前已测定了几乎所有的三 (环戊二烯基 )稀土配合物及部分三 (取代环戊二烯基 )稀土配合物的晶体结构 ,但有关三 (茚基 )稀土配合物的报道较少 .第一个三 (茚基 )稀土配合物是无水三氯化稀土与 3倍物质的量的茚基钠 C9H7Na在四氢呋喃中反应而得 ,但未报道其晶体结构[2 ] .后来用同样的反应却分离出以氯为桥的二聚体离子对配合物[Na( THF) 6][Ln( η5- C9H7) 3μ( Cl) Ln( η5- C9H7) 3]( Ln=Nd,Sm) [3] .无水三氯化稀土与 Mg( C9H7) 2 或C9H7K等物质的量反应则生成非溶剂化的 ( C9H7) 3Sm[4 ] ,而与茚基钠和环辛四烯钾 ( C8H8K)以 1∶ 2∶ 1物质的量比反应时 ,则得到 ( C9H7) 3Ln( THF) ( Ln=Nd,Gd) [5] .Bottomley[6] 曾用 ( C9Me7) K(七甲基茚基钾 )与 L n Cl3(物质的量比 3∶ 1 )反应制备 ( C9Me7) 3Nd( THF) 5和 ( C9Me7) 3Er· ( THF) 3,但未报道晶...

Electrochemical characteristic of LaNi-based hydrogen storage alloys

Effect of purity of alloy components on the electrode performance of LaNi2 alloys was investigated. The results showed the purity of components had less effect on discharge capacity and self-discharge of LaNi2 alloys. Partial substitution of Al or Mn for Ni greatly improved discharge properties of LaNi2-xAlx, or LaNi2-yMny alloys as negative electrodes in MFl-Ni battery, 0.15less than or equal toxless than or equal to0.25; 0.15less than or equal toyless than or equal to0.25. In addition, surface treatment of LaNi1.8Al0.2 alloy electrode was performed by polymerizing cis-butenedioate with Co-60- gamma -ray radiation, which. had better affect on self-discharge and cycle life of the alloy electrodes at low temperature(-28 C-degrees).

The VUV spectra properties of (Y,Gd)BO3 : Eu

The (Y, Gd) BO3 : Eu phosphor was synthesized by solid-state reaction, The UV spectra showed that in a certain range of Gd3+ concentration, more Gd3+ absorbed energy and transferred it to Eu3+ with its increasing concentration. From the spectra in VUV region, it was observed that both the doping and the concentrations of Gd3+, Eu3+ greatly affected the absorption of the host lattice. The absorbances at 147 nm and 170 nm increased when the Gd3+ was doped which can be explained as that Gd3+ transferred energy to BO4. The optical properties of (Y, Gd)BO3 : Eu were the best when the concentration of Eu3+ was about 0.04.

VUV excitation properties of LnAl(3)B(4)O(12): Re (Ln = Y, Gd; Re=Eu, Tb)

Vacuum ultraviolet excitation spectra of LnAl(3)B(4)O(12):Re (Ln = Y, Gd; Re = Eu, To), along with X-ray photoelectron spectra, were measured. The spectra are tentatively interpreted in terms of the optical properties of the rare earth ions and the band structure. It was found that there is an energy transfer from the hosts to the rare earth ions. It was also found that the top of the valence band in the Gd compound is mainly formed by the 2p levels of O2- and the 4f levels of Gd3+, and in the Y compound mainly by the 2p levels of O2-. (C) 2000 Elsevier Science Ltd. All rights reserved.

Studies of Gd-diethylenetriamine pentaacetic acid in boving serum albumin solution by nuclear magnetic resonance spectroscopy

In this paper, the water relaxation enhancement behavior of Gd-diethylenetriamine pentaacetic acid(DTPA) in water and in aqueous solution of bovine serum albumine(BSA) has been studied. The T-1 relaxivity of Gd-DTPA in BSA solution is higher than that in aqueous solution. The results indicate that Gd-DTPA can integrate non-covalently with BSA mainly in forms of (Gd-DTPA) . BSA, (Gd-DTPA)(2) . BSA, for which the apparent equilibrium constant is 0.026 mmol(-1).L,0.0018 mmol(-2).L-2 respectively. This method would be used to study the interactivities between protein and contrast agent.