改性剂对Mc尼龙－6等温结晶动力学的影响

用差示扫描量热法测定了Ⅲ型改性剂对ＭＣ尼龙－６等温结晶行为的影响。结果表明，Ａｖｒａｍｉ指数ｎ、成核机理、晶体生长方式及结晶晶型基本不受改性剂的影响，Ⅲ型改性剂使ＭＣ尼龙－６熔体等温结晶条件下结晶速率变慢，结晶度χｃ略有降低，平衡熔点升高６℃，有利于改善ＭＣ尼龙－６的韧性及耐热性。

二（2，6－二叔丁基－4－甲基苯氧基）钐配合物催化丙烯腈聚合

首次报道用稀土有机配合物作为单组份催化剂催化丙烯腈聚合。研究了聚合条件对标题化合物的催化活性和所得聚丙烯腈的分子量及其结构的影响。

浇铸尼龙－6的结晶与熔融

用ＤＳＣ法研究了Ｌａ＿２Ｏ＿３和Ｙ＿２Ｏ＿３对浇铸尼龙－６（ＭＣ尼龙－６）结晶与熔融的影响。二者都使ＭＣ尼龙－６熔体等速降温的结晶温度Ｔ＿ｃ升高、等速升温的溶点Ｔ＿ｍ降低、结晶度Ｘ＿ｃ降低，拉伸过程的断裂能密度及断裂伸长率提高。Ｌａ＿２Ｏ＿３使ＭＣ尼龙－６平衡熔点只降低，结晶速率增加，结晶完善程度变差。Ｙ＿２Ｏ＿３使ＭＣ尼龙－６的升高，它可显著改善ＭＣ尼龙－６的耐热性。

二（2，6－二叔丁基－4－甲基苯氧基）钐配合物催化甲基丙烯酸甲酯聚合

二（２，６－二叔丁基－４－甲基苯氧基）钐配合物催化甲基丙烯酸甲酯聚合扈晶余，齐贵中（中国科学院长春应用化学研究所稀土化学与物理开放实验室长春１３００２２）沈琪（苏州大学化学系苏州）关键词钐配合物，甲基丙烯酸甲酯，聚合二价稀土有机化合物具有很强的还原性...

氧化钕填充尼龙6的结晶行为

利用示差扫描量热仪（ＤＳＣ）研究了氧化钕（Ｎｄ２Ｏ３）对尼龙６（ＰＡ６）等温结晶行为的影响。结果表明，Ｎｄ２Ｏ３在ＰＡ６体系中起到了异相成核作用，提高了ＰＡ６的晶体增长速率。

A BIS(2,6-DI-TERT-BUTYL-4-METHYLPHENOLATO)-SAMARIUM(II) COMPLEX, [SM(OAR)2(THF)3]-THF

The title complex, bis(2,6-di-tert-butyl-4-methyl-phenolato-O)tris(tetrahydrofuran-O)samarium tetrahydrofuran solvate, [Sm(C15H23O)2(C4H8O)3].C4H8O, has distorted trigonal bipyramidal geometry around the Sm(II) atom. The 0(2), 0(3) and 0(4) atoms of the

A NEW METHOD FOR THE SYNTHESIS OF LN(ETA-6-C6ME6)(ALCL4)3 (LN=ND, SM, GD, YB), AND THE X-RAY CRYSTAL-STRUCTURE OF YB(ETA-6-C6ME6)(ALCL4)3.MEC6H5

A series of neutral eta6-C6Me6 complexes of lanthanide elements Ln(176-C6Me6)(AlCl4)3 . MeC6H5(Ln = Nd, Sm, Gd, Yb) has been prepared directly in good yields from the reaction of LnCl3, AlCl3 and C6Me6 in toluene. The complexes have been characte

FRACTIONATED CRYSTALLIZATION IN POLYOLEFINS-NYLON-6 BLENDS

The crystallization behavior of polyolefins-nylon 6 polymer blends was studied by differential scanning calorimetry (DSC) measurements. In these blends, the crystallization of the minor component often starts with distinctly deeper supercooling than that

吡啶－2，6－二甲酸镧钇异核配合物的合成及晶体结构

合成了吡啶－２，６－二甲酸镧钇异核配合物晶体。元素分析结果表明，化学式为ＬａＹ（ＨＤＰＡ）＿２·（ＤＰＡ）＿２．１２Ｈ＿２Ｏ，ＤＰＡ为吡啶－２，６－二甲酸根。用Ｘ射线衍射法测定了配合物的单晶结构，其结构式为［ＬａＹ（ＨＤＰＡ）＿２（ＤＰＡ）＿２（Ｈ＿２Ｏ）＿４」·８Ｈ＿２Ｏ，属单斜晶系，Ｐ２＿１／ａ空间群。晶胞参数：ａ＝１．２９７５（４）ｎｍ，ｂ＝１．１２６６（３）ｎｍ，ｃ＝１．４０７９（３）ｎｍ；β＝１０２；１５（２）°，Ｖ＝２．０１１９０（１）ｎｍ￣３，Ｚ＝４，Ｄｃ＝１．８３ｇ／ｃｍ￣３，稀土离子的配位数为９，其配位多面体为扭曲的三冠三角棱柱体。

ELECTROCHEMICAL DETECTION OF COBALT IN HAIR FOLLOWING ON-COLUMN DERIVATIZATION WITH 1-(2-PYRIDYLAZO)-2-NAPHTHOL-6-SULFONIC ACID AND REVERSED-PHASE LIQUID-CHROMATOGRAPHY

A method for the specific determination of cobalt based on reversed-phase liquid chromatography with amperometric detection via on-column complex formation has been developed. A water-soluble chelating agent, 1-(2-pyridylazo)-2-naphthol-6-sulphonic acid (PAN-6S), is added to the mobile phase and aqueous cobalt solutions are injected directly into the column to form in situ the cobalt-PAN-6S chelate, which is then separated from other metal PAN-6S chelates and subjected to reductive amperometric detection at a moderate potential of -0.3 V. Because the procedure eliminates the interference of oxygen and depresses the electrochemical reduction of the mobile phase-containing ligand PAN-6S, by virtue of the quasi:reversible electrode process of the cobalt-PAN-6S complex, a low detection limit of 0.06 ng can be readily obtained. Interference effects were examined for sixteen common metal species, and at a 5- to 8000-fold excess by mass no obvious interference was observed. The feasibility of the method as an approach to the specific analysis of cobalt in a hair sample has been demonstrated.

THE CLEAVAGE REACTION OF THE MO-MO TRIPLE BOND - THE CRYSTAL-STRUCTURES OF MOLYBDENUM COMPLEXES [CPMO(CO)(2)(C(5)H(4)NS)], [CPMO(CO)(2)(C(9)H(6)NS)]O=PPH(3) AND [CPMO(CO)(2)(S(2)CNME(2)]

The reactions of [Cp2Mo2(CO)4] (1) with 2,2'-dipyridyl disulphide (C5H4NS-)2, 8,8'-diquinolyl disulphide (C9H6NS-)2 and tetramethyl thiuram disulphide (Me2NC(S)S-)2 in toluene solution resulted in the cleavage of the Mo-Mo triple bond to yield molybdenum complexes [CpMo(CO)2(C5H4NS)] (2), [CpMo(CO)2(C9H6NS)] (3) and [CpMo(CO)2(S2CNMe2)] (4), respectively. The molecular structures of 2, 3 . O=PPh3 and 4 were determined by X-ray diffraction studies. Crystals of 2 are monoclinic, space group P2(1)/n, with Z = 4, in a unit cell of dimensions a = 6.448(1), b = 12.616(2), c = 14.772(2) angstrom, beta = 92.85(1)-degrees. The structure was refined to R = 0.028 and R(w) = 0.039 for 1357 observed reflections. Crystals of 3 . O=PPh3 are triclinic, space group P1BAR, with Z = 2, in a unit cell of dimensions a = 11.351(3), b = 13.409(3), c = 9.895(2) angstrom, alpha = 94.59(2), beta = 90.35(2), gamma = 78.07(2)-degrees. The structure was refined to R = 0.033 and R(w) = 0.037 for 3260 observed reflections. Crystals of 4 are monoclinic, space group P2(1)/a and Z = 4 with a = 12.468(5), b = 7.637(2), c = 13.135(4) angstrom, beta = 96.62(3). The structure was refined to R = 0.032 and R(w) = 0.042 for 1698 observed reflections. Each of complexes 2-4 contains a cyclopentadienyl ligand, a cis pair of carbonyls and a chelate ligand (S,N donor or S,S donor). All the compounds have distorted square-pyramid structures.

STUDIES ON THE REACTIONS OF TRANSITION-METAL HYDRIDES WITH HETEROCUMULENES .6. REACTION OF CP2ZR(H)CL WITH RNCS (R=C6H5, 2-C10H7, C-C6H11 AND N-C4H9)

The novel NS-containing zirconacycle complexes Cp2ZrCl[SC(H)NR] (1a, R = C6H5; 1b, R = 2-C10H7; 1c, R= C-C6H11; 1d; R = n-C4H9) were obtained by insertion reactions of Cp2Zr(H)Cl with RNCS. 1(a-d) could react further with Cp2Zr(H)Cl to yield a sulphur-bridging compleX (Cp2ZrCl)2S (2) and a Schiff base RN=CH2. The crystal structure of la has been determined by X-ray analysis.

(η~6-Arene)Nd(AlCl_4)_3AIR_3催化丁二烯的聚合

关于η~6-芳烃过渡金属有机络合物催化烯烃聚合的研究已早有报道.但对于η~6-芳烃稀土络合物催化烯烃聚合的研究至今未见报道.我们在研究了(η~6-C_6H_6)Nd-(AlCl_4)_3-AlR_3催化异成二烯聚合的基础上,又考察了不同芳烃烯土络合物和几种AlR_3组成的催化剂对丁二烯聚合的催化活性. 1.原料及试剂:丁二烯和烷基铝均为聚合级.汽油分别经浓硫酸,氢氧化钠水溶

Sm~(3+)在玻璃中的发光以及Sb~(6+)、Ce~(6+)、Gd~(3+)对Sm~(3+)发光性质的影响

本文研究了单掺(Sm~(3+),Ce~(3+)、Gd~(3+).Sb~(3+)、双掺(Sm~(3+)+Ce~(3+)、Sm~(3+)+Gd~(3+),Sm~(3+)+Sb~(3+))和兰掺(Sm~(3+)+Gd~(3+)+Ce~(3+))约四十余种不同玻璃的发射谱和激发谱.探讨了玻璃成份和掺杂离子浓度对Sm~(3+)发光性质的影响以及Ce~(3+),Gd~(3+)、Sb~(3+)、Ce~(3+)+Gd~(3+)对Sm~(3+)的敏化作用。

双环己基18冠6对水/硝基苯界面离子的促进传输

Li~-和H~-因较强的亲水性,较难穿越液/液界面进行传输。本文报道了冠醚双环已基18冠6对Li~+,Na~+,Rb~-和H~-在水/硝基苯界面的促进传输行为,求得了相应促进传输过程的一系列参数,并对被传输离子在传输过程中的形态变化进行了初步的探讨。