TRIM5α基因的分子进化及AIDS 免疫治疗相关腺病毒载体的构建

本文包括两方面的研究工作。第一部分对TRIM5α基因在灵长类动物中的分 子进化进行了详尽的研究，希望能从分子进化的角度认识该基因在灵长类动物抵 抗病毒感染尤其是在限制HIV-1 感染过程中所起的作用，并希望能够从中寻找适 合用于AIDS 基因治疗的基因。第二部分构建了艾滋病治疗性DC 疫苗相关的腺 病毒载体，包括表达HIV-1 gp120 基因、表达HIV-1 gp41 基因、表达HSP70 基 因以及仅表达绿色荧光蛋白基因的重组腺病毒，为利用HIV-1 抗原刺激的DC 免 疫治疗AIDS 的研究奠定了基础。 在长期的HIV-1 和AIDS 研究中，人们发现很多种旧大陆猴不能被HIV-1 感 染，而旧大陆猴中的平顶猴却对HIV-1 有易感性，并且对SIV 的感染也表现出较 其它旧大陆猴更为严重的症状，TRIM5α基因的发现解释了这一“历史之谜”。人 们发现旧大陆猴的TRIM5α基因具有很强的抗HIV-1 的功能，是旧大陆猴抵抗 HIV-1 感染必须的免疫因子；并且进一步证明TRIM5α是灵长类动物中普遍存在 的、具有抗多种逆转录病毒功能的天然免疫因子。我们通过对TRIM5α基因在灵 长类动物中的分子进化研究发现，证明该基因在进化过程中表现出很强的达尔文 正向选择作用，尤其是其负责识别逆转录病毒衣壳蛋白的SPRY 结构域。TRIM5 α基因表现出的正向选择很可能是灵长类动物在长期的进化过程中反复被病毒 感染的选择压力造成的，这也从另一个方面证明TRIM5α基因是一个普遍存在的、 具有抗病毒功能的天然免疫因子。对不同灵长类动物的TRIM5α基因序列分析发 现，该基因的序列变化很大，这可能是不同灵长类动物被HIV-1 感染后表现不同 症状的原因；基于密码子的中性检测证明，TRIM5α基因SPRY 结构域上第347、 354、552 位氨基酸表现出很强的正向选择，说明这些位点可能与其抗病毒功能 关系紧密。另外，我们发现平顶猴的TRIM5α基因与CypA 基因以一种新的方式 融合，这种融合方式不同于鹰猴中该基因与CypA 基因的融合，而且与具有较强抗HIV-1 功能的恒河猴的TRIM5α基因比较，平顶猴的TRIM5α基因在几个与其 抗病毒功能紧密相关的位点上的氨基酸也发生了变化，这可能是其被HIV-1 和 SIV 感染后表现出较其它旧大陆猴更为严重症状的原因。 将经过HIV-1 抗原刺激的DC 回输到HIV-1 感染者体内可以诱导产生较强的 抗HIV-1 细胞免疫反应，这种免疫反应理论上可以治疗AIDS，而且对HARRT 治 疗能够产生很好的协同作用；HSP70 蛋白可以提高DC 对抗原的加工和呈递。为 了检测经HIV-1 抗原刺激的DC 免疫治疗AIDS 的实际效果，同时检验通过HSP70 增强DC 对HIV-1 抗原的加工和呈递功能，发现并解决这一治疗方案存在的问题， 我们首先从HIV-1 的基因组及带有HSP70 基因的质粒上克隆了gp120、gp41 和 HSP70 基因，测序及序列分析证明所克隆的基因没有发生影响表达的突变。然后 我们分别构建了表达有关基因的重组腺病毒载体。在荧光显微镜下可以观察到感 染后的细胞内绿色荧光蛋白报告基因的表达，证明成功构建了四种重组腺病毒， 而PCR 扩增也证明在其中三种重组腺病毒的基因组上确实分别带有gp120、gp41、 HSP70 基因。同时我们还构建了不表达外源基因的重组腺病毒，作为未来实验中 的对照载体。未来的研究工作包括目的基因表达检测，重组腺病毒感染DC 及腺 病毒感染DC 功能分析等。

1、喜树碱类衍生物抗HIV构效关系与作用机制研究2、HIV/AIDS患者疱疹病毒感染状况及性病患者的HIV感染状况分析

1、喜树碱类衍生物抗HIV构效关系与作用机制研究 喜树碱为传统的抗肿瘤药物。本研究对经过化学结构修饰的喜树碱类衍生物进行抗HIV活性及作用机制的研究，并初步探讨了其抗HIV构效关系。 我们对喜树碱类衍生物A系列化合物A1(喜树碱)、A2(10-羟基喜树碱)及A3(7-羟基喜树碱)进行了抗HIV活性检测。化合物A1和A3有较好的抗HIV-1和抗HIV-2活性，化合物A2没有显示抗HIV活性。表明化合物A1的C-10位上-OH基团修饰可能会降低抗HIV活性，化合物A1的C-7位上-CH2OH基团修饰和C-20位-CH3缺失可能会提高其抗HIV活性。对化合物A3和A1的抗HIV机制研究发现：二者对整合酶有一定的结合活性，对慢性感染H9/HIV-1ⅢB 和Jurkat/HIV-1ⅢB细胞中病毒复制没有抑制活性、不能阻断H9/HIV-1ⅢB与正常细胞间的融合，对重组的HIV-1蛋白酶和逆转录酶没有抑制活性。化合物A1和A3不具有选择性杀伤HIV-1ⅢB慢性感染的H9和Jurkat细胞系的作用。进一步进行化合物A3诱导 H9和H9/HIV-1ⅢB、Jurkat和Jurkat/HIV-1ⅢB的凋亡实验显示，化合物A3诱导感染HIV-1ⅢB和未感染病毒细胞的凋亡没有选择性。据此我们初步认为化合物A3和A1的抗HIV作用可能与抑制整合酶活性有关，该化合物可能还作用于其它靶点。 喜树碱类衍生物B系列中化合物B1为20(S)-O - [-O-( 1'-氧基-2',2',6',6'-四甲基哌啶-4'-丁二酸)]-20-喜树碱酯，化合物B2为20(S)-O - [-N-( 1'-氧基-2',2',6',6'-四甲基-1',2',5',6'-四氢吡啶酰胺)-4'-丙氨酸)]-20-喜树碱酯)。我们对化合物B1和B2进行了抗HIV活性检测。结果显示：化合物B2有较好的抗HIV-1和抗HIV-21、喜树碱类衍生物抗HIV构效关系与作用机制研究 喜树碱为传统的抗肿瘤药物。本研究对经过化学结构修饰的喜树碱类衍生物进行抗HIV活性及作用机制的研究，并初步探讨了其抗HIV构效关系。 我们对喜树碱类衍生物A系列化合物A1(喜树碱)、A2(10-羟基喜树碱)及A3(7-羟基喜树碱)进行了抗HIV活性检测。化合物A1和A3有较好的抗HIV-1和抗HIV-2活性，化合物A2没有显示抗HIV活性。表明化合物A1的C-10位上-OH基团修饰可能会降低抗HIV活性，化合物A1的C-7位上-CH2OH基团修饰和C-20位-CH3缺失可能会提高其抗HIV活性。对化合物A3和A1的抗HIV机制研究发现：二者对整合酶有一定的结合活性，对慢性感染H9/HIV-1ⅢB 和Jurkat/HIV-1ⅢB细胞中病毒复制没有抑制活性、不能阻断H9/HIV-1ⅢB与正常细胞间的融合，对重组的HIV-1蛋白酶和逆转录酶没有抑制活性。化合物A1和A3不具有选择性杀伤HIV-1ⅢB慢性感染的H9和Jurkat细胞系的作用。进一步进行化合物A3诱导 H9和H9/HIV-1ⅢB、Jurkat和Jurkat/HIV-1ⅢB的凋亡实验显示，化合物A3诱导感染HIV-1ⅢB和未感染病毒细胞的凋亡没有选择性。据此我们初步认为化合物A3和A1的抗HIV作用可能与抑制整合酶活性有关，该化合物可能还作用于其它靶点。 喜树碱类衍生物B系列中化合物B1为20(S)-O - [-O-( 1'-氧基-2',2',6',6'-四甲基哌啶-4'-丁二酸)]-20-喜树碱酯，化合物B2为20(S)-O - [-N-( 1'-氧基-2',2',6',6'-四甲基-1',2',5',6'-四氢吡啶酰胺)-4'-丙氨酸)]-20-喜树碱酯)。我们对化合物B1和B2进行了抗HIV活性检测。结果显示：化合物B2有较好的抗HIV-1和抗HIV-2活性，而化合物B1的抗HIV活性差。表明化合物B1的C-4’位-CH2被-NH取代，同时C-3’位-CH3修饰可能会提高其抗HIV活性。对化合物B2的抗HIV机制研究发现，化合物B2对慢性感染H9/HIV-1ⅢB细胞中病毒复制没有抑制活性、不能阻断H9/HIV-1ⅢB与正常细胞间的融合，对HIV-1蛋白酶、重组的HIV-1逆转录酶及整合酶没有抑制活性。化合物B2不具有选择性杀伤HIV-1ⅢB慢性感染的H9细胞系的作用。化合物B2抗HIV的作用机制还需进一步研究。 2、HIV/AIDS患者疱疹病毒感染状况及性病患者的HIV感染状况分析 疱疹病毒是AIDS患者合并感染的常见病原体。引起人类疾病的8种疱疹病毒与HIV感染及AIDS进展、机会性感染、恶性肿瘤密切相关。为了解HIV/AIDS患者人类8型疱疹病毒感染状况，我们检测了30例AIDS患者、40例HIV携带者及70例正常对照的液标本中8型疱疹病毒感染状况。采用ELISA法检测单纯疱疹病毒1型(HSV-1)、单纯疱疹病毒2型(HSV-2)、水痘-带状疱疹病毒(VZV)和巨细胞病毒(CMV)；采用PCR法检测EB病毒(EBV)、疱疹病毒6型(HHV-6)、疱疹病毒7型(HHV-7)及疱疹病毒8型(HHV-8)。结果显示，HIV/AIDS患者中HSV-1、HSV-2、VZV、CMV、HHV-6、HHV-8 阳性率均高于健康体检者，其中AIDS患者VZV感染率与HIV携带者有显著性差异；在AIDS患者中多种疱疹病毒共感染普遍存在，必须重视HIV/AIDS患者合并疱疹病毒感染的防治。 性病可促进HIV的传播，了解性病患者的HIV感染状况及临床特征具有重要的意义。在自愿接受HIV咨询检测的基础上，对临床确诊的412例性病患者进行HIV-1/2抗体检测，并对其临床特征进行分析研究。结果显示412例性病患者的HIV检出率为2.9%。性病患者中检出HIV阳性率依次为：尖锐湿疣(6.2%)、生殖器疱疹(4.2%)、梅毒(3.4%)、淋病(1.5%)及非淋菌性尿道炎(1.0%)。83.3%合并感染HIV的性病患者存在多性伴，商业性行为普遍存在，安全套使用率极低现象。感染HIV的尖锐湿疣及生殖器疱疹患者以频繁复发为突出表现，1例合并感染HIV的梅毒患者半年即进展为神经梅毒。性病患者是HIV感染的重要高危人群，危险性行为是其感染HIV和其它性病的主要原因，应该加强性病患者的HIV检测。对临床上频繁复发的尖锐湿疣及生殖器疱疹患者、快速进展的梅毒患者应高度怀疑合并HIV感染的可能。

Fast plasma sintering deposition of nano-structured silicon carbide coatings

Fast plasma sintering deposition of SiC nano-structured coatings was achieved using a specially designed non-transferred dc plasma torch operated at reduced pressure. Employing the Taguchi method, the deposition parameters were optimized and verified. With the optimized combination of deposition parameters, homogeneous SiC coatings were deposited on relatively large area substrates of Φ50 mm and 50×50 mm with a deposition rate as high as 20 μm/min. Ablation test showed that such coatings can be used as oxidation resistance coatings in high temperature oxidizing environment.

Fabrication, thermal stability and mechanical properties of novel composite hardmetals obtained by solid-state reaction and hot-pressing sintering

A novel cemented carbides (W0.7Al0.3)C-0.65-Co with different cobalt contents were prepared by solid-state reaction and hot-pressing technique. Hot-pressing technique as a novel technique was performed to fabricate the bulk bodies of the hard alloys. The novel cemented carbides have superior mechanical properties compared with WC-Co. The density, operate cost of the novel material were lower than WC-Co system. The novel materials were easy to process nanoscale sintering and get the rounded particles in the bulk materials. There is almost no eta-phase in the (W0.7Al0.3)C-0.65-Co cemented carbides system although the carbon deficient get the astonished 35% value.

Fabrication, thermal stability and mechanical properties of novel (W0.5Al0.5)C-0.8-Co composite prepared by mechanical alloying and hot-pressing sintering

A novel cemented carbides (W0.5Al0.5)C-0.8-Co with different cobalt contents were prepared by mechanical alloying and hot-pressing technique. Hot-pressing technique as a common technique was performed to fabricate the bulk bodies of the hard alloys. The novel cemented carbides have superior mechanical properties compared to WC-Co. The density, operating cost of the novel material were much lower than WC-Co. There is almost no eta-phase in the (W0.5Al0.5)C-0.8-Co cemented carbides system although the carbon deficient get the value of 20%, and successfully got the nanostructured rounded (W0.5Al0.5)C-0.8 particles.

A novel (W-Al)-C-Co composite cemented carbide prepared by mechanical alloying and hot-pressing sintering

Novel cemented carbides (W0.4Al0.6)C-0.5-Co With different cobalt contents were prepared by mechanical alloying and hot-pressing technique. Hot-pressing technique as a common technique was performed to fabricate the bulk bodies of the hard alloys. The novel cemented carbides have good mechanical properties compared with WC-Co. The density and operation cost of the novel material were much lower than the WC-Co system. It was easy to process submicroscale sintering with the novel materials and obtain the rounded particles in the bulk materials. There is almost no eta-phase in the (W0.4Al0.6)C-0.5-CO cemented carbides system although the carbon deficient obtains the astonishing value of 50%.

Bulk ultrafine binderless (W0.4Al0.6)C prepared by high pressure sintering

Pure (W0.4Al0.6)C powder of about 1 mu m in diameter was sintered by the high pressure sintering (HPS) process without the addition of any binder phase. The microstructure, Vickers micro hardness and density versus the sintering time and temperature are well described. The most suitable sintering condition under pressure of 4.5 GPa is 1873 K for 8 min. Under this sintering condition, the hardness can reach 2295 kg mm(-2) and the relative density can reach 98.6%.

Nanostructured novel cemented hard alloy obtained by mechanical alloying and hot-pressing sintering and its applications

A novel cemented carbides (W0.8Al0.2)C-0.7-Co with different cobalt contents were prepared by mechanical alloying and hot-pressing technique. Hot-pressing technique as a common technique was performed to fabricate the bulk bodies of the hard alloys. The novel cemented carbides have superior mechanical properties compared with WC-Co. The density, operate cost of the novel material were much lower than WC-Co system. The novel materials were easy to process nanoscale sintering and get the rounded particles in the bulk materials.

La-2(Zr0.7Ce0.3)(2)O-7 - A new oxide ceramic material with high sintering-resistance

Oxide ceramics with high sintering-resistance above 1473 K have very important applications in thermal barrier coatings (TBCs), catalytic combustion and high-temperature structural materials. Lanthanum zirconate (La2Zr2O7, LZ) is an attractive TBC material which has higher sintering-resistance than yttria stabilized zirconia (YSZ), and this property could be further improved by the proper addition of ceria.

Sintering-resistant hollow fibers of LaMgAl11O19 prepared by electrospinning

Lanthanum magnesium hexaaluminate (LMA) is very important ceramic material for catalytic combustion of natural gas. The sintering-resistant hollow fibers of LMA with diameters ranging from 1 to 3 mu m were fabricated from alcoholic solutions containing polyvinyl pyrrolidone (PVP) and aqueous solution of lanthanum, magnesium and aluminum nitrates. The interaction between PVP and nitrates were studied by X-ray diffraction and Fourier transmission-infrared spectroscopy. The forming mechanism of hollow fibers and the sintering ability of hollow LaMgAl11O19 fibers were discussed.

Synthesis and high-pressure sintering of lanthanum magnesium hexaaluminate

Lanthanum magnesium hexaaluminate is a very important ceramic material for high temperature applications. In this paper lanthanum magnesium hexaaluminate has been synthesized directly by solid-state reaction. The forming mechanism was investigated by XRD. The SEM photographs show that the prepared powders are made of hexagonal plates. These powders can be well sintered at the high temperature (1600 degrees C) under the high pressure (4.5 GPa), and the relative density reaches 94.8%.

High-pressure sintering the novel light (W0.25Al0.75)C hard material without binder phase

A novel hard material of (W0.25Al75)C has been successfully prepared by the high-pressure sintering process without the addition of any binder phase. The high-pressure is a suitable and powerful technique for sintering the binderless hard material, the relative density of the hard material can reach 99.6% under high-pressure sintering. The density of the novel light hard material is only 6.2371 g cm(-3), which is much lighter than the normal hard material. The hardness of the light hard material can reach 18.89 GPa even the aluminum content get the astonished 75%.

High-pressure sintering study of a novel hard material (W0.5Al0.5)C-0.5 without binder metal

A novel hard material of (W0.5Al0.5)C-0.5 has been successfully sintered under high-pressure (4.5 GPa). The influence of sintering time and temperature on the microstructure, Vickers microhardness and density of the as-prepared specimens are well described. Interestingly, sintering temperature has an amazing influence on the hardness, density and microstructure of the specimen while the sintering time does not. It is found that the most suitable sintering condition from our work is 1600 degrees C and 10 min under pressure of 4.5 GPa. The hardness and relative density of the as-prepared sample can reach 2340 kg mm(-2) and 98.62%, respectively. The cell parameters of the sintered specimen is found to be little smaller than that of the powder, which we propose is related to the high pressure.