The design and operation of a new clapboard-type internal circulating fluidized-bed gasifier

The design and operation of a new clapboard-type internal circulating fluidized-bed gasifier is proposed in this article. By arranging the clapboard in the bed, the gasifier is thus divided into two regions, which are characterized by different fluidization velocities. The bed structure is designed so that it can guide the circulating flow passing through the two regions, and therefore the feedstock particles entrained in the flow experience longer residence time. The experimental results based on the present new design, operating in the temperature range of 790 degrees C-850 degrees C, indicate that the gas yield is from 1.6-1.9 Nm(3)/kg feedstock, the gas enthalpies are 5,345 kJ/Nm(3) for wood chip and 4,875 kJ/m(3) for rice husk, and a gasification efficiency up to 75% can be obtained.

Interface energy and its influence on interface fracture between metal and ceramic thin films in nanoscale

A theoretical model about the size-dependent interface energy between two thin films with different materials is developed by considering the chemical bonding contribution based on the thermodynamic expressions and the structure strain contribution based on the mechanical characteristics. The interface energy decreases with reducing thickness of thin films, and is determined by such available thermodynamic and mechanical parameters as the melting entropy, the melting enthalpy, the shear modulus of two materials, etc. The predicted interface energies of some metal/MgO and metal/Al2O3 interfaces based on the model are consistent with the results based on the molecular mechanics calculation. Furthermore, the interface fracture properties of Ag/MgO and Ni/Al2O3 based on the atomistic simulation are further compared with each other. The fracture strength and the toughness of the interface with the smaller structure interface energy are both found to be lower. The intrinsic relations among the interface energy, the interface strength, and the fracture toughness are discussed by introducing the related interface potential and the interface stress. The microscopic interface fracture toughness is found to equal the structure interface energy in nanoscale, and the microscopic fracture strength is proportional to the fracture toughness. (C) 2010 American Institute of Physics. [doi:10.1063/1.3501090]

高寒湿地自然保护区多核心动态分区研究——以四川若尔盖湿地国家级自然保护区为例

中国拥有92466 Km2的各类高原湿地，具有湿地退化、过度放牧等相似特征，保护与利用矛盾突出。高寒湿地保护区尽管在制度上以核心区、缓冲区来约束当地的放牧等外来干扰行为，但在实际管理中却不能起到应有的作用。 本研究以四川若尔盖湿地国家级自然保护区为例，应用3S技术，建立保护区多功能动态分区工作流模型，通过不同植被类型的识别和空间特征分析、不同动物类群在上述植被生境中的时空分布特征分析、保护区主要干扰因素的时空分布特征分析，突出对保护区主要保护对象（湿地生态系统）的保护，对保护区进行管理分区，依据野生动物利用特征和植被生长特征对核心区进行年周期动态利用，缓解保护与发展的矛盾，促进保护区的优化管理。 应用归一化植被指数（NDVI）与植被盖度的相关性，将归一化植被指数（NDVI）转化为植被盖度指数（MDVI），结合保护区牧场划分和时空利用特征专家经验，结果表明，MDVI值在1-139之间主要代表着水体、裸地、沙地等；MDVI140-256为草地和高山灌丛；MDVI210是当地夏牧场和秋冬牧场的划分区间值。 合理的区划需要资金、技术和政策的支持，为保证保护区多核心动态分区的实施，本研究提出了生态工程、牧业发展方式转变、湿地特色产业发展、湿地政策、社区参与和科技支撑等六大保障措施。 In China, 92466 Km2 highland or frigid wetlands are (were) facing major management problems, such as wetland degradation and overgazing. Conflict between conservation and utilization on those wetlands can be found anywhere today. Although many nature reserves have been setup for protection of frigid wetland, and core and buffer zone has been declared to forbid any kinds of disturbance, local farmers still use these areas for grazing. As an example by Sichuan Roige Wetlands National Nature Reserve(SRWNRR), we set up a 3S flow model to analyze the character of year-round distribution patters of vegetation, wildlife, and grazing. Combined and overlapped these characters together, we select multi-core zone and buffer zone, then define a dynamic management period in different zone to optimize protection wetland in the reserve. Normalized Difference Vegetation Index（NDVI）is highly related with coverage of vegetation. When convert NDVI to MDVI (coverage index, 1-256), index 139 and 210 can be as inflexion to distinguish among water/sand/bared land, summer pasture, and autumn / winter pasture. We use these to select different layers and analyze grazing pattern. To be more realistic, we put forward some strategies to support our multi-core and dynamic management of wetland in Roige, including ecological restoration engineering, changing of stock raising industry, changing of wetland policy, community based management and technology renovation supports.

Sudies on non-isothermal melt crystallization kinetics in PET/PEN/DBS blends

Macrokinetic models, namly the modified Avrami, Ozawa and Zibicki models, were applied to study the non-isothermal melt crystallization process of PET/PEN/DBS blends by DSC measurement. The modified Avrami model was found to describe the experimental data fairly well. With the cooling rates in the range from 5 to 20 K/min, Ozawa model could be well used to describe the early stages of crystallization. However, Ozawa model did not fit the polymer blends during the late stages of crystallization, because it ignored the influence of secondary crystallization. The crystallization ability of the blends decreases with increasing the DBS content from analysis by using Ziabicki kinetic model, which is similar to the results based on calculation of the effective energy barrier of the blends.

基于模糊神经网络的多移动机器人自学习协调系统

研究多移动机器人的运动规划问题．针对机器人模型未知或不精确以及环境的动态变化，提出一种自学习模糊控制器（ＦＬＣ）来进行准确的速度跟踪．首先通过神经网络的学习训练构造ＦＬＣ，再由再励学习算法来在线调节ＦＬＣ的输出，以校正机器人运动状态，实现安全协调避撞

多移动机器人实时最优运动规划

研究多移动机器人的实时运动规划问题，提出了运动规划问题的体系结构，并将最优控制与智能决策相结合，建立实时专家系统，在其支持下，使机器人在时间—能量最优情况下完成规划策略。仿真结果表明该方法具有很强的实时性。

基于专家系统的多移动机器人模糊自校正协调系统

研究多移动机器人的运动规划问题，在实时运动规划专家系统的基础上提出了一种串级模糊控制器，以校正实际工作环境下各机器人的运动状态与理想情况下可能产生的误差，使各机器人正确调整各自运动状态，达到协调工作的目的。

基于规则的移动机器人实时运动规划

研究移动机器人在动态环境中的导航与避障问题。为提高规划的实时性,提出了基于规则的规划方法,将多移动障碍环境机器人的运动规划分解为相对简单的单移动障碍运动规划,利用最优控制来实现单障碍的最优避障,并用智能搜索方法解决了移动机器人在多移动障碍环境中的实时运动规划问题。仿真实例表明了该方法的有效性。

地震反射界面形态与介质各向异性属性联立成像：地震反射波旅行时与偏振信息综合反演

It has been a difficult problem faced by seismologists for long time that how exactly to reconstruct the earth's geometric structure and distribution of physical attributes according to seismic wave's kinematical and dynamic characteristics, obtained in seismological observation. The jointing imaging of seismic reflector and anisotropy attributes in the earth interior is becoming the research hot spot. The limitation of shoot and observation system makes that the obtained seismic data are too scarce to exactly reconstruct the geological objects. It is popular that utilizing only seismic reflection traveltimes or polarizations information make inversion of the earth's velocity distribution by fixing seismic reflector configuration (vice versa), these will lead to the serious non-uniqueness reconstruction due to short of effective data, the non-uniqueness problem of reconstructing anisotropy attributes will be more serious than in isotropy media. Obviously it is not enough to restrict the media structure only by information of seismic reflection traveltimes or polarizations, which even sometimes will lead to distorted images and misinterpretation of subsurface structure. So we try to rebuild seismic reflection structure (geometry) and media anisotropic structure (physics) in the earth interior by jointing data of seismic wave kinematics and dynamics characteristics, we carry out the new experiment step by step, and the research mainly comprises of two parts: one is the reconstruction of P-wave vertical velocity and anisotropic structure(Thomsen parameter s and 8) in the transversely isotropic media with vertical symmetrical axis(VTI) by fixing geometrical structure, and the other is the simultaneous inversion of the reflector surface conformation and seismic anisotropic structure by jointing seismic reflection traveltimes and polarizations data. Simulated annealing method is used to the first research part, linear inversion based on BG theory and Simulated annealing are applied to the second one. All the research methods are checked by model experiments, then applied to the real data of the wide-angle seismic profile from Tunxi, Anhui Province, to Wenzhou, Zhejiang Province. The results are as following The inversion results based on jointing seismic PP-wave or PSV-wavereflection traveltimes and polarizations data are more close to real model than themodels based simply on one of the two data respectively. It is shown that the methodwe present here can effectively reconstruct the anisotropy attributes in the earth'sinterior when seismic reflector structure is fixed.The layer thickness, P-wave vertical velocity and Thomsen anisotropicparameters {s and 8) could be resolved simultaneously by jointing inversion ofseismic reflection traveltimes and polarizations with the linear inversion methodbased on BG theory.The image of the reflector structure, P-wave vertical velocity and theanisotropy parameters in the crust could be obtained from the wide-angle seismicprofile from Tunxi (in Anhui Province), to Wenzhou (in Zhejiang Province). Theresults reveal the difference of the reflector geometrical structure and physicalattributes in the crust between Yangtze block and Cathaysia block, and attempt tounderstand the characteristics of the crustal stress field in the areas.

不同类型量表的线上调查和传统纸笔调查的比较研究

During the past 11 years, with the rapid development of the Internet, more and more psychologists began to realize and take advantage of it, which led to a growing number of psychological test administrated on the internet for data collection. But there were some controversy about the reliability and representatively of this new method. To examine the applicability of the Online Survey and how different types of scales used on the internet, we first reversed the measurement instrument, then from three different levels to investigate the equivalence of online survey and paper-and-pencil assessment, namely, sample level, scale level and item level. Both Classical Test Theory and Item Response Theory were used to analyze the invariance of different types of scale applicability on the internet. The main conclusions of this study could be drawn as follows: 1. In the sample-based study, self-select sample of the online survey was compared to the random sampled sample of paper-and-pencil assessment. The results showed there were no gender difference between them (p>0.05), but the online survey sample was characterized with high qualifications, high-income and younger features (88% of the sample with post-secondary education or above, and 71% aged 20 -29 years). There were significant differences on the scores of all scales between online survey and paper-and-pencil assessment (p<0.01). With demographic controlled, there was no significant difference on the variable of Neurotic between different surveys (p>0.05). 2. With in-group design, it was proved equivalence of the scale of BI (Attitude toward Brand Importance), BT (Attitude toword Brand Switcher), Extraversion, and Conscientiousbess in the compared study in the reliability, construct validity and average scores. 3. On the item level, the results based on the Item Response Theory analysis showed that 2PLM is appropriate for personality and attitude scales. With regard to personality scale, there emerged some items with DIF in the dimensions of Openness to the experience subscale and Agreeable subscale. However, there were no significant differences about the test function. 4. Exploring the psychometrics properties of answer formats of five-, six-, seven-, ten-points, it was showed that different measurement validity between online survey and paper-and-pencil test. It was also described the lower reliability and validity of six-point scale. In conclusion, the results support the application of personality scale online, but for attitude scale, we need to choose prudently.