Applicability of the MTT assay for measuring viability of cyanobacteria and algae, specifically for Microcystis aeruginosa (Chroococcales, Cyanobacteria)

Several assay methods were screened for viability assessment in cyanobacteria using Microcystis aeruginosa FACHB 905. Compared with fluorescent diacetate (FDA), Evan's Blue and autofluorescence, the 3-[4,5-dimethylthiazol-2-yl]2,5-diphenyl tetrazolium bromide (MTT) assay, which was based on the ability of viable cells to reduce MTT to formazan, was found to be reliable and was selected for further study. MTT concentration, incubation time and temperature were optimized for M. aeruginosa. Improvements to the sensitivity and reproducibility of the MTT assay included performing it in the dark to reduce the effects of formazan light sensitivity when extracted in DMSO. Another improvement involved collecting viability data by cell by counting rather than colourimetrically, which was concluded from the fact that oxidoreductase activity, responsible for MTT reduction, would elevate or decrease under stress conditions. Half-life of oxidoreductase in dead cell was calculated to be 3 h. The MTT assay was also found to be applicable to other cyanobacteria and diatoms, including field samples, but not for algae belonging to Chlorophyta, Euglenophyta, Pyrrophyta or Chrysophyta. Based on the above results, we proposed an optimized procedure for the MTT method on Microcystis strains. The use of this assay may be of importance to better understand the dynamics of bloom and the fate of Microcystis under natural or disturbed conditions.

Determination of sexual hormones in liquid cosmetics by polymer monolith microextraction coupled with high performance liquid chromatography

A method was presented for the determination of testosterone, methyltestosterone and progesterone in liquid cosmetics by coupling polymer monolith microextraction (PMME) to high performance liquid chromatography with UV detection. A poly (methacrylic acid-ethylene glycol dimethacrylate) monolithic capillary column was selected as the extraction medium, which showed high extraction capacity towards these compounds. To achieve optimum extraction performance, several parameters relating to PMME were investigated, including extraction flow rate and pH value, inorganic salt and organic phase concentration of the sample matrix. By simple dilution with phosphate solution and filtering, the sample solution then could be directly injected into the device for extraction. The limits of detection of testosterone, methyltestosterone and progesterone were calculated to be 2, 3, 2, 8 and 4.6 mu g/L. Good linearity was achieved in the range of 10 to 1000 mu g/L with a linear coefficient. r value above 0. 996. Excellent method reproducibility was found by intra- and inter-day precisions, yielding the relative standard deviations of < 7. 7 % and < 7. 5 %, respectively. Recovery for them in the real samples was between 83% and 119%.

Analysis of estrogens in environmental waters using polymer monolith in-polyether ether ketone tube solid-phase microextraction combined with high-performance liquid chromatography

A simple, rapid and sensitive on-line method for simultaneous determination of four endocrine disruptors (17 beta-estradiol, estriol, bisphenol A and 17 alpha-ethinylestradiol) in environmental waters was developed by coupling in-tube solid-phase microextraction (SPME) to high-performance liquid chromatography (HPLC) with fluorescence detection (FLD). A poly(acrylamide-vinylpyridine-NAP-methylene bisacrylamide) monolith, synthesized inside a polyether ether ketone (PEEK) tube, was selected as the extraction medium. To achieve optimum extraction performance, several parameters were investigated, including extraction flow-rate, extraction time, and pH value, inorganic salt and organic solvent content of the sample matrix. By simply filtered with nylon membrane filter and adjusting the pH of samples to 6.0 with phosphoric acid, the sample solution then could be directly injected into the device for extraction. Low detection limits (S/N = 3) and quantification limits (S/N = 10) of the proposed method were achieved in the range of 0.006-0.10 ng/mL and 0.02-0.35 ng/mL from spiked lake waters, respectively. The calibration curves of four endocrine disruptors showed good linearity ranging from quantification limits to 50 ng/mL with a linear coefficient R-2 value above 0.9913. Good method reproducibility was also found by intra- and inter-day precisions, yielding the RSDs less than 12 and 9.8%, respectively. Finally, the proposed method was successfully applied to the determination of these compounds in several environmental waters. (c) 2006 Elsevier B.V. All rights reserved.

Fabrication of nanoscale metallic air-bridges by introducing a SiO2 sacrificial layer

A new method to fabricate nanoscale metallic air-bridges has been investigated. The pillar patterns of the air-bridge were defined on a SiO2, sacrificial layer by electron-beam lithography combined with inductively coupled plasma etching. Thereafter, the span (suspended part between the pillars) patterns were defined with a second electron-beam exposure on a PMMA/PMMA-MAA resist system. The fabrication process was completed by subsequent metal electron-beam evaporation, lift-off in acetone, and removal of the sacrificial layer in a buffered hydrofluoric (HF) solution. Air-bridges with two different geometries (line-shaped and cross-shaped) were studied in detail. The narrowest width of the air-bridges was around 200 nm, and the typical length of the air-bridges was 2-5 mu m. The advantages of our method are the simplicity of carrying out electron-beam exposure with good reproducibility and the capability of more accurate control of the pillar sizes and shapes of the air-bridge. (C) 2007 Elsevier Ltd. All rights reserved.

Al2O3 : Cr3+ nanotubes synthesized via homogenization precipitation followed by heat treatment

Cr3+-doped NH4Al(OH)(2)CO3 nanotubes, templated by surfactant assemblies, were successfully synthesized via the homogenization precipitation method, and various crystallographic phase Al2O3:Cr3+ nanotubes were also obtained by postannealing at different temperatures. The characteristic R-1, R-2 doublet line transitions of ruby can be observed in the high crystalline alpha-Al2O3 nanotubes calcined at temperatures higher than 1200 degrees C. The results also indicate that the formation mechanism of the tubular nanostructures should result from the self-rolling action of layered compound NH4Al(OH)(2)CO3 under the assistance of the surfactant soft-template. The convenient synthetic procedure, excellent reproducibility, clean reactions, high yield, and fine quality of products in this work make the present route attractive and significant. Aluminum oxide nanotubes with high specific surface area could be used as fabricating nanosized optical devices doped with different elements and stable catalyst supports of metal clusters.

青藏高原栽培青稞遗传多样性研究

青稞，是我国藏区居民对裸大麦的称谓，它不仅是藏民的主要食粮、燃料和牲畜饲料，而且也是啤酒、医药和保健品生产的原料；青稞不仅为藏区人民的健康和经济发展做出了很大的贡献，而且对人类健康和社会经济的可持续发展都有重要的意义。青藏高原是我国及世界上青稞分布和种植面积最大的地区，资源极其丰富。虽然从经典遗传直到分子标记对我国大麦遗传多样性都有研究，但研究手段、数量仍然不够深入，对我国大麦资源遗传多样性研究的信息非常有限，不能很好地满足大麦遗传研究和育种应用的需要，尤其是对西藏栽培大麦的遗传多样性的研究还只是刚刚开始，关于栽培青稞多态性的研究报道很少。本研究采用SSR标记和蛋白质电泳两类技术，从SSR标记位点、单体醇溶蛋白、B组醇溶蛋白和淀粉粒结合蛋白（SGP）等四个方面对我国青藏高原栽培青稞的遗传多样性进行了综合评价。 SSR标记具有基因组分布广泛、数量丰富、多态性高、容易检测、共显性、结果稳定可靠、实验重现性好、操作简单、经济、易于高通量分析等许多优点，被认为是用于遗传多样性、品种鉴定、物种的系统发育、亲缘关系及起源等研究的非常有效的分子标记。本研究采用SSR标记分析了64份青藏高原栽培青稞的遗传多样性，同时评估SSR标记在我国大麦育种和品种鉴定中的应用潜力。选择了30个已知作图位点SSR标记，其中25个标记与重要性状的控制位点连锁紧密。选择的30个SSR标记，5个未得到很好的扩增产物，3个无多态性。22个多态性SSR标记位点中，每位点检测出等位基因2~15个，共检测出等位基因132个，平均每位点6.0 个。各多态位点检测出基因型为2~11种，位点HVM33的基因型最多。各多态位点的多态信息指数为0.16~0.91, 平均为0.65。根据PIC值选择了13个SSR标记用于我国青藏高原栽培青稞基因型鉴定，这些标记的PIC值为0.6以上。结合PIC值和基因型差异，选择了8个多态信息含量高的SSR标记，构建了高效指纹图谱，此图谱能把64份材料完全区分。 贮藏蛋白电泳分析是研究相关编码蛋白基因多态性的非常有效的方法。大麦单体蛋白与小麦醇溶蛋白相对应，具有丰富的多态性，可用于大麦遗传多样性、品种鉴定和群体进化等研究。本研究通过A-PAGE电泳技术研究了84份青藏高原栽培青稞的单体醇溶蛋白多态性。大麦单体醇溶蛋白图谱与小麦醇溶蛋白电泳图谱类似，所分离的蛋白清晰地分为ω－，γ－，β－和α－四个部分。青藏高原栽培青稞单体醇溶蛋白具有丰富的多态性，84份青稞材料中存在43条不同的蛋白带，75种组合带谱；其中67种为单一材料所独有，另8种则分别包含了2-3份材料。每份材料中拥有醇溶蛋白带为6－16条，含有6-10条单体醇溶蛋白带材料较多。西藏和四川材料群体单体醇溶蛋白多态性不同，具有区域特异性。西藏材料中发现了40条不同蛋白带，3条特异带，46 种蛋白组合；四川材料中出现了40种不同蛋白带，26种条带组合, 3条特异带。基于单体蛋白多态性的聚类与材料的来源有一定的相关性。A-PAGE单体蛋白具有丰富的多态性，可作为遗传研究和品种鉴定的标记。 大麦醇溶蛋白（hordein）是大麦籽粒的主要贮藏蛋白，与大麦的营养品质和加工品质密切相关，而且具有丰富的多态性，广泛用于品种鉴定、种质筛选、遗传多样性和亲缘关系研究。B组醇溶蛋白是主要的醇溶蛋白组份，约占总醇溶蛋白的80%，而且具有丰富的多态性。本研究采用SDS-PAGE分析了72份青藏高原栽培青稞B组醇溶蛋白的遗传多样性。青藏高原栽培青稞B组醇溶蛋白具有丰富的多态性，72份青稞材料中存在15种蛋白带，30种组合带谱，其中15种为单一材料所独有，另15种则分别包含了2-10份材料。每份材料中B组醇溶蛋白条带数为4-8条，含5、6条的材料较常见。不同来源的群体材料间B组醇溶蛋白组成存在差异，西藏青稞含有26种蛋白组合带谱，其中有19种特异带谱；四川群体中共发现11种蛋白组合带型，其中有4种特有带谱。两群体中都存在稀有条带。聚类分析将材料分成三组，材料聚类与材料来源地没有明显的相关性。 淀粉粒蛋白（Starch granule proteins, SGPs）是一类与淀粉粒结合的微量蛋白，一些淀粉粒蛋白具有淀粉生化合成中主要的酶蛋白功能，其变异会影响淀粉含量和特性，从而影响淀粉的应用。关于我国大麦淀粉粒组成研究还未见报道。本实验首次开创了我国大麦淀粉粒结合蛋白的研究工作。采用SDS-PAGE电泳技术研究了青藏高原栽培青稞的SGP组成，并分析了不同SGP组合间淀粉含量的差异，初步探索了所分离的SGP蛋白与淀粉合成的关系。66份青稞材料中分离了10种主要的SGP，其表观分子量为40-100KD，低于60KD的SGP带有7条，共有16种组合带谱；各SGP蛋白和组合带谱出现的频率存在差异，青藏高原青稞的SGP组成存在多态性。西藏青稞和四川青稞的SGP组成有很大差异，SGP组成具有地域差异性，西藏青稞含有12种蛋白组合带谱，其中有9种特异带谱；四川群体中共发现7种蛋白组合带型，其中有4种特有带谱；两群体中仅有3种共同的蛋白组合带谱。SGP蛋白特性将66份青稞分为三组, 即Ⅰ、Ⅱ、Ⅲ，材料聚类与材料来源具有一定的相关性。不同组合带谱材料间淀粉含量差异显著性检验结果显示，不同带谱间材料的总淀粉含量、直链淀粉含量和支链淀粉含量有差异，带谱2（SGP1+3+7+9+10）和8（SGP1+2+4+6+8）的总淀粉含量及支链淀粉含量显著大于组合带谱3（SGP1+3+7+10）的总淀粉含量。组合带谱7（SGP1+2+6+8）的直链淀粉含量显著低于带谱11（SGP1+5+8）的直链淀粉。带谱SGP2、3、4、5、6、7、8、9、10可能参与淀粉合成，SGP9可能与高支链淀粉的合成相关。 SSR标记位点、单体醇溶蛋白、B组醇溶蛋白、淀粉结合蛋白等四个方面的研究结果表明青藏高原SSR标记多态性、单体醇溶蛋白多态性、B组醇溶蛋白多态性和SGP多态性都非常丰富，与青藏高原是栽培青稞的多样性分布中心的观点一致。 青藏高原栽培青稞的SSR标记、单体醇溶蛋白、B组醇溶蛋白和SGP多态性表现出很大差异。SSR标记覆盖了整个基因组，多态性非常高。单体蛋白、B组醇溶蛋白、SGP蛋白是育种中非常关注的性状，他们只是代表基因组中的某一区域或位点，多态性相对较低。但单体蛋白多态性很高，84份材料中检测出43条不同蛋白带，75种不同的组合带谱。SSR标记技术和单体蛋白技术都是遗传多样性研究的有力工具，但单体蛋白技术不仅多态性高，而且经济、操作简便，是种质鉴定的理想方法。 对不同标记的多态性材料数据进行聚类，聚类图能为我们提供各材料间的遗传相似信息，为材料选择提供参考。但材料聚类与材料来源的地理区域的相关性表现不一致。SSR聚类和B组醇溶蛋白聚类与材料的来源地无相关性，而单体醇溶蛋白和SGP聚类与材料来源地有一定相关性，即西藏群体和四川群体分别有集中类群，这可能是人为选择的附加效应。 不同来源的群体材料的遗传多样性不同，具有区域特异稀有基因，加强不同地区间资源的交换和配合使用，有利于增加群体遗传多样性和新品种培育。 青藏高原栽培青稞的麦芽浸提性状、淀粉性状、病虫及裸粒等重要农艺性状控制位点存在丰富的变异，遗传基础宽广，可能蕴藏着多种不同的等位基因，是研究重要性状遗传特性、基因资源挖掘和遗传育种的宝贵资源库。 Hulless barley, due to its favorable attributes such as high feed value, good human nutrition，rich dietary fiber and ease processing, attracts people,s attention . Hulless barley plays a very important role in Tibetan life, used as essential food crop, main animal feed and important fuel. In addition to tsampa (roasted barley flour), a main food for Tibetan, hulless barley is also made into cake, soup, porridge, recent naked barley liquor and cornmeal. Qinghai-Tibet Plateau is one of a few areas which plant naked barley widely in the world and also has a long growing history. Genetic diversity of the cultivated hulless barley in this region , however, has not been documented. The study of genetic diversity existing within this population is of particular interest in germplasm identification, preservation, and new cultivar development. This study analyzed the genetic diversity of the cultivated naked barley from Qinghai-Tibet plateau through the study of SSR marker loci and monomeric prolamins, B-horden and starch granule proteins. SSRs are present abundantly in genomes of higher organisms and have become a popular marker system in plant studies. SSRs offer a number of advantages, such as the high level of polymorphisms, locus specificity, co-dominance, reproducibility, ease of use through PCRand random distribution throughout the genome. In barley, several hundred SSRs have been developed and genetically mapped and can therefore be selected from specific genomic regions. The genetic diversity of 64 cultivated naked barley from Tibet and Sichuan was studied with 30 SSRs of known map location.Among the selected SSR markers, PCR products of 5 SSR markers were not obtained and 3 SSR marker loci were monomeric. A total of 132 alleles were identified at 22 polyomeric SSR loci. The number of alleles per locus ranged from 2 to 15, with an average of 6.0. The polymorphism information content values for the SSRs ranged from 0.08 to 0.94, with an average of 0.65. 13 SSR markers with the PIC value >0.6 have been selected for discrimination of Qinghai-Tibet naked barley genotypews. A finger Print map was developed through 7 SSR markers with the high PIC value. It could be used as an efficient tool for gene discovery and identification of gernplasm. Hordeins, the main storage proteins of the barley seed, are composed of momomeric and polymeric prolamins and divided into -A, B, C and D groups in order of decreasing electrophoretic mobility. Hordeins show high inter-genotypic variation and have been extensively used as markers for cultivar identification and analyzing the genetic diversity. This study analyzed the genetic diversity of B-hordein in 72 naked barley from Qinqhai-Tibet Plateau. Extensive diversity was observed. A total of 15 different bands and 30 distinct patterns were found. Jaccard's coefficient of similarity was calculated, and the accessions were divided into three　main groups by cluster analysis using UPGMA. Differentiation among the populations from different collecting regions based on the polymorphism of B-hordein was investigated. Monomeric prolamins show high inter-genotypic variation and have been used as molecular markers for cultivar identification, analyzing the genetic diversity in collections and investigating the evolution processes and structure of populations However, the cultivated hulless accessions from Qinghai-Tibet Pateau in China have never been examined with respect to monomeric prolamins. This study analyzed the genetic diversity of monomeric prolamins (protein fraction corresponding to wheat gliadins) using the Acid -PAGE technique in eighty-four cultivated hulless barley from Qinqhai-Tibet Plateau in China. Extensive diversity was observed. A total of 43 different bands were found, of which 21 different bands were in the region of ω group, 8 in the region of γ, 8 in the region of β, and 6 in the region of α group. Among the 86 accessions, 75 distinct patterns were identified. The number of bands ranged from 6 to 16, depending on the variety. Jaccard’s coefficient of similarity was calculated, and the lines were grouped by cluster analysis using UPGMA. A dendrogram was obtained from the analysis of the groups and five main clusters were identified. No relationship between the distribution in the dendrogram and growth habits and origins of the cultivars could be detected. Starch is the major constituent of the cereal endosperm, comprising approximately 65% of the dry weight of the mature wheat grain. The starch formed in all organs of plants is packaged into starch granules, which vary widely between species and cultivars in size and shape. Wheat endosperm starch granules contain about corresponding to the main biosynthase of starch. This report firstly dealed with intraspecific variation of the major SGPs in cultivated naked barley from Qinghai-Tibet plateau. A total of 10 major SGPs were observed in the range of 40KD-100KD and 16 types of patterns were found. Based on the variation of SGPs, accessions studied were classified into 3 groups. A geographical cline of electrophoregram was observed. In addition, significance test of the difference of starch content among groups and types of patterns were done, and the results indicated those SGPs could be related to the content of starch. Diagram obtained through cluster analysis exhibited a structuration of diversity and genetic relationship among cultivated hulless accessions. In breeding program, parents with genetically distant relationship for hybridization will increase genetic diversity of progenies. In conclusion, cultivated naked barley from Qinghai-Tibet Plateau in China presents a high variability with respect to monomeric prolamins，SSR markers , B- hordeins and SGPs. The result of this study supports Qinghai-Tibet Plateau is the center of cultivated hulless barley and the cultivated naked barley is considered to be a gene pool with large diversity and could be applied to breeding for cereal.

Magnets for HIRFL-CSR rings

The magnet design, fabrication, and measurement of HIRFL-CSR (Heavy Ion Research Facility in Lanzhou Cooling Storage Ring) are presented. All magnets will be laminated And welded with an armor-coated surface between two big endplates made of sticking glue 0.5 mm-thick sheets. The dipole of CSRm was chosen an H type with an air circle on the pole to improve the field uniformity. The dipole of CSRe was chosen the C type with an air circle and two air slots on the pole to improve the field homogeneity. Its reproducibility of magnet to magnet was adjusted with inserting small laminating pieces before demountable pole ends to reach less than +/- 2 x 10(-4) at optimized field level. CSRm quadrupoles diameter is 170 mm and has two different lengths, and its endplates were made with punching pieces after coating with epoxy glue, there is chamfered directly on the pole ends to reduce 12th-order contribution of field and without the demountable pole ends. CSRe main quadrupoles diameter is 240 mm and has two different lengths, and its endplates were also made with punching pieces coated with epoxy glue, there is also chamfered directly on the pole ends to reduce 12th-order contribution of field like CSRm.

耗散反应产物激发函数及截面测量的不重复性

耗散反应产物激发函数中涨落结构的研究，是分析重离子反应中间双核系统时间演化和耗散过程的一个有效手段。本论文论述102一108MeV19F＋93Nb反应和110．25一118．75MevlgF＋2勺反应耗散产物激发函数的实验结果，通过关联函数分析、误差分析并结合有关统计模型探讨耗散反应产物截面特征涨落的物理根源。实验采用△E一E方法对反应产物进行电荷鉴别。各个出射道的激发函数中都观测到了涨落结构。通过统计理论方法的分析，揭示出耗散反应产物截面涨落区别于复合核截面涨落的一系列特征性质，如长程的能量关联、反应系统和宏观条件相同的多次独立测量的截面及其涨落不重复。对19F＋93Nb反应耗散产物截面进行误差分析的结果表明：能量自关联函数的离散程度大约相当于随机计数率引起的离散程度的3倍；激发函数曲线相对于能量平均本底的几率分布，有大约21％超出了标准高斯分布宽度的3倍；两次测量得到的截面之差的几率分布，大约有18％也超出了标准高斯分布宽度的3倍。可见，两次测量的产物激发函数中截面的不重复性具有明确的统计意义，其来源不是有限计数率的随机涨落。另外，为了进一步验证耗散产物截面不重复的结果，还测量了入射能量固定的19F＋27AI反应产物截面随靶点的分布，截面相对于平均值的偏差有巧％超出标准高斯分布宽度的3倍。通过测量19F＋27AI反应耗散产物角分布并提取角分散参数，讨论角分散参数的物理意义及其与产物电荷数z之间的依赖关系：产物中转移的核子数越多，动力学角分散越大。新近发展的核反应统计理论指出：在高激发的、强相互作用的有限多体系统中，考虑微观的道与道之间的关联，认为相位的无地化过程进行得非常缓慢，中间系统的演化过程具有对初始条妙的极端敏感性。能够解释耗散反应产物激发函数中不平滑的能量结构，解释多次救立钡吐量的截面不重复性具有统计意义。

Repeatedly usable immobilized pH gradient in a monolithic capillary column

Glycidyl methacrylate (GMA) and ethylene dimethacrylate (EDMA) were used to synthesize a monolithic capillary column containing reactive epoxy groups. Glutaraldehyde was introduced and linked to the monolith after a process of amination. An aqueous solution of commercial carrier ampholytes (CAs, Ampholine) was focused in such a polymer column. The primary amino groups of CAs reacted with glutaraldehyde along the capillary. CAs were immobilized at different positions in the column according to their isoelectric points (pl), resulting in a monolithic immobilized pH gradient (M-IPG). Isoelectric focusing (IEF) was performed without CAs in such an M-IPG column. Due to the covalent attachment of the CAs this M-IPG can be repeatedly used after its preparation. Good stability, linearity, and reproducibility were obtained.

Study of an electroosmotic pump for liquid delivery and its application in capillary column liquid chromatography

A packed-bed electroosmotic pump (EOP) was constructed and evaluated. The EOP consisted of three capillary columns packed in parallel, a gas-releasing device, Pt electrodes and a high-voltage power supply. The EOP could generate output pressure above 5.0 MPa and constant flow rate in the range of nl/min to a few mul/min for pure water, pure methanol, 2 mM potassium dihydrogenphosphate buffer, the buffer-methanol mixture and the pure water-methanol mixture at applied potentials less than 20 W The composition of solvent before/after pumping was quantitatively determined by using a gas chromatograph equipped with both flame ionization detector and thermal conductivity detector. It was found that there were no apparent changes in composition and relative concentrations after pumping process for a methanol-ethanol-acetonitrile mixture and a methanol-water mixture. Theoretical aspect of the EOP was discussed in detail. An capillary HPLC system consisting of the EOP, an injection valve, a 15 cm x 320 mum i.d., 5 mum Spherigel C(18) stainless steel analytical column, and an on-column UV detector was connected to evaluate the performance of the EOP. A comparative study was also carried out with a mechanical capillary HPLC pump on the same system. The results demonstrated that the reproducibility of flow rate and the pulsation-free flow property of the EOP are superior to that of mechanical pump in capillary HPLC application. (C) 2004 Elsevier B.V. All rights reserved.

Synthesis of chiral stationary phases with radical polymerization reaction of cellulose phenylcarbamate derivatives and vinylized silica gel

Cellulose phenylcarbamate derivatives having methacrylate groups were synthesized with regioselective and non-regioselective procedures. These derivatives were chemically immobilized onto a vinylized silica gel, respectively, via a radical co-polymerization reaction. The immobilization was efficiently attained using a small amount of AIBN. The chiral recognition abilities of the prepared chiral stationary phases (CSPs) were evaluated by HPLC resolution of test enantiomers. It was observed that most of the enantiomers were completely resolved with markedly high column efficiency of 30,000-40,000 plates per metre for the eluted peaks. The effect of the amount of methacrylolyl chloride used for preparation on resolution was investigated. A direct comparison of the chiral recognition ability was made on the regioselectively and non-regioselectively prepared CSPs. In addition, the chemically bonded-type of CSPs were found to be relatively stable with addition of solvents such as tetrahydrofuran (THF) and chloroform into the mobile phase, which can lead to the dissolution of cellulose derivatives on the coated CSPs. Thus the choice of solvents used as the mobile phase is greatly extended and better resolution of several test enantiomers was observed on the prepared CSPs with THF and chloroform as a composition in the mobile phase. The batch-to-batch and run-to-run reproducibility was also discussed on the newly prepared CSPs. (C) 2004 Elsevier B.V. All rights reserved.

A miniaturized fluorescence detector with a windowless flow cell using a light-emitting diode

A miniaturized fluorescence detector using a high-brightness light-emitting diode as an excitation source was constructed and evaluated. A windowless flow cell based on a commercial four-port cross fitting was designed to reduce the stray-light level and to eliminate the optical alignment. The observed detection limit for fluorescein was 26 nM in the continuous-flow mode. The error in the reproducibility of the responses was evaluated by the FIA method, and was found to be within 2% RSD.

The separation of biomolecules using capillary electrochromatography

The unique properties of capillary electrochromatography such as high performance, high selectivity, minimum consumption of both reagents and samples, and good compatibility with mass spectrometry make this technique an attractive one for the analysis of biomolecules including peptides, proteins, carbohydrates, nucleosides and nucleoticles. Irreversible adsorption between the biomolecules and the charged packing surface leads to a lack of reproducibility and serious peak tailing, so various approaches have been taken to overcome this and to improve the technique for future challenges.

Analysis of specific gene by integration of isothermal amplification and electrophoresis on poly(methyl methacrylate) microchips

We have successfully achieved the integration of isothermal amplification and the subsequent analysis of specific gene fragments on poly(methyl methacrylate) microchips. In our experiments, loop-mediated isothermal amplification, which can offer higher specificity and efficiency than PCR, has been performed at a constant temperature (65 degreesC). After amplification, products could be either examined by the integrated microchip-based electrophoresis or directly observed by naked eye with SYBR Green I added into the reaction solution. By such an integrated microsystem, the amplification and the subsequent analysis of prostate-specific antigen gene with template concentration at 23 fg/muL could be finished within 15 min, which demonstrates its advantages of high specificity, good reproducibility, and fast speed in gene detection.

Preparation and characterization of monolithic columns for capillary electrochromatography with weak electroosmotic flow

Monolithic columns of capillary electrochromatography (CEC) with weak electroosmotic flow (EOF) have been prepared by in situ polymerization of butyl methacrylate and ethylene dimethacrylate, without any charged groups in the reaction mixture. The reproducibility of such columns has been proved good no matter whether they are prepared in the same batch or in different batches. In the case of BMA-EDMA monoliths, besides the traditional ternary mixture - 1-propanol, 1,4-butanediol, and water, binary porogenic solvents with only alcohols have also been adopted. Compared with ternary porogenic solvents, the design with binary ones allows for fine control of the pore diameter and the formation of the specific surface of the monolithic polymers. The composition of porogenic reagents has also been shown to have an effect on EOF in the column systems. In addition, the Joule heat effect in such columns has been studied by varying the inner diameter of columns. Through the separation of acidic compounds, monolithic columns with low EOF have shown potential in the analysis of charged samples.