23 resultados para Plant population density
Resumo:
根据不同的生物气候状况 ,可将黄土高原分成五个生物气候区 :暖温带湿润半湿润森林区、暖温带半湿润半干旱森林草原区、中温带半干旱典型草原区、中温带干旱半干旱荒漠草原区以及中温带干旱草原化荒漠区。紧密结合上述生物气候区域特征 ,将生态学的有关原理引入到该区的治理与生态恢复中 ,提出了治理黄土高原的新模式 :正确实施生物措施 ,人工模拟天然生态系统。该区的生态恢复应从系统的角度考虑 ,并严格遵守生态学的有关规律在不同的生物气候区构建与该区大环境一致的不同的生态系统 ,改变过去那种在黄土高原全面造林而又成效不佳的做法
Resumo:
Wind erosion is one of the major environmental problems in semi-arid and arid regions. Here we established the Tariat-Xilin Gol transect from northwest to southeast across the Mongolian Plateau, and selected seven sampling sites along the transect. We then estimated the soil wind erosion rates by using the Cs-137 tracing technique and examined their spatial dynamics. Our results showed that the Cs-137 inventories of sampling sites ranged from 265.63 +/- 44.91 to 1279.54 +/- 166.53 Bq.m(-2), and the wind erosion rates varied from 64.58 to 419.63 t.km(-2).a(-1) accordingly. In the Mongolia section of the transect (from Tariat to Sainshand), the wind erosion rate increased gradually with vegetation type and climatic regimes; the wind erosion process was controlled by physical factors such as annual precipitation and vegetation coverage, etc., and the impact of human activities was negligible. While in the China section of the transect (Inner Mongolia), the wind erosion rates of Xilin Hot and Zhengxiangbai Banner were thrice as much as those of Bayannur of Mongolia, although these three sites were all dominated by typical steppe. Besides the physical factors, higher population density and livestock carrying level should be responsible for the higher wind erosion rates in these two regions of Inner Mongolia.
Resumo:
In recent years, the role of human activities in changing sediment yield has become more apparent for the construction of hydraulic engineering and water conservation projections in the Upper Yangtze River, but it has not been evaluated at the macro scale. Taking Sichuan Province and Chongqing City as an example, this paper studies the relationship between socio-economic factors and sediment yield in the Upper Yangtze River based on section data in 1989 and 2007. The results show that sediment yield is significantly correlated with population density and cultivated area, in which the former appears to be more closely related to sediment yield. Moreover, in the relation of sediment yield vs. population density, a critical value of population density exists, below which the sediment yield increases with the increase of population density and over which the sediment yield increases with the decrease of population density. The phenomenon essentially reflects the influence of natural factors, such as topography, precipitation and soil property, and some human activities on sediment yield. The region with a higher population density than critical value is located in the east of the study area and is characterized by plains, hills and low mountains, whereas the opposite is located in the west and characterized by middle and high mountains. In the eastern region, more people live on the lands with a low slope where regional soil erosion is slight; therefore, sediment yield is negatively related with population density. In contrast, in the western region, the population tends to aggregate in the areas with abundant soil and water resources which usually lead to a higher intensity of natural erosion, and in turn, high-intensity agricultural practices in these areas may further strengthen local soil erosion. It is also found that population tends to move from the areas with bad environment and high sediment yield to the areas with more comfortable environment and less sediment yield. The natural factors have greater influence on sediment yield of western region than that of eastern region. Generally, the natural factors play a dominant role on sediment yield in the Upper Yangtze River.
Resumo:
Population data which collected and saved according to administrative region is a kind of statistical data. As a traditional method of spatial data expression, average distribution in every administrative region brings population data on a low spatial and temporal precision. Now, an accurate population data with high spatial resolution is becoming more and more important in regional planning, environment protection, policy making and rural-urban development. Spatial distribution of population data is becoming more important in GIS study area. In this article, the author reviewed the progress of research on spatial distribution of population. Under the support of GIS, correlative geographical theories and Grid data model, Remote Sensing data, terrain data, traffic data, river data, resident data, and social economic statistic were applied to calculate the spatial distribution of population in Fujian province, which includes following parts: (1) Simulating of boundary at township level. Based on access cost index, land use data, traffic data, river data, DEM, and correlative social economic statistic data, the access cost surface in study area was constructed. Supported by the lowest cost path query and weighted Voronoi diagram, DVT model (Demarcation of Villages and Towns) was established to simulate the boundary at township level in Fujian province. (2) Modeling of population spatial distribution. Based on the knowledge in geography, seven impact factors, such as land use, altitude, slope, residential area, railway, road, and river were chosen as the parameters in this study. Under the support of GIS, the relations of population distribution to these impact factors were analyzed quantificationally, and the coefficients of population density on pixel scale were calculated. Last, the model of population spatial distribution at township level was established through multiplicative fusion of population density coefficients and simulated boundary of towns. (3) Error test and analysis of population spatial distribution base on modeling. The author not only analyzed the numerical character of modeling error, but also its spatial distribution. The reasons of error were discussed.
Resumo:
Spatial population data, obtained through the pixeling method, makes many related researches more convenient. However, the limited methods of precision analysis prevent the spread of spatial distribution methods and cumber the application of the spatial population data. This paper systematically analyzes the different aspects of the spatial population data precision, and re-calculates them with the reformed method, which makes breakthrough for the spread of the pixeling method and provides support and reference for the application of spatial population data. The paper consists of the following parts: (2) characters of the error; (2) origins of the error; (3) advancement on the calculating methods of the spatial population data. In the first place, based on the analysis of the error trait, two aspects of the spatial population data precision are characterized and analyzed: numerical character and spatial distributing character. The later one, placed greater emphasis on in this paper, is depicted in two spatial scales: county and town. It is always essential and meaningful to the research in this paper that spatial distribution is as important as numerical value in analyzing error of the spatial distributed data. The result illustrates that the spatial population data error appears spatially in group, although it is random in the aspect of data statistics, all of that shows there lies spatial systematic error. Secondly, this paper comes to conclude and validate the lineal correlation between the residential land area (from 1:50000 map and taken as real area) and population. Meanwhile, it makes particular analysis on the relationship between the residential land area, which is obtained from the land use map and the population in three different spatial scales: village, town and county, and makes quantitative description of the residential density variation in different topological environment. After that, it analyzes the residential distributing traits and precision. With the consideration of the above researches, it reaches the conclusion that the error of the spatial distributed population is caused by a series of factors, such as the compactness of the residents, loss of the residential land, the population density of the city. Eventually, the paper ameliorates the method of pixeling the population data with the help of the analysis on error characters and causes. It tests 2-class regionalization based on the 1-class regionalization of China, and resorts the residential data from the land use map. In aid of GIS and the comprehensive analysis of various data source, it constructs models in each 2-class district to calculate spatial population data. After all, LinYi Region is selected as the study area. In this area, spatial distributing population is calculated and the precision is analyzed. All it illustrates is that new spatial distributing population has been improved much. The research is fundamental work. It adopts large amounts of data in different types and contains many figures to make convincing and detailed conclusions.
Resumo:
Experiments in tanks and cages were conducted to examine the effects of stocking density and body size of the Mitten crab (Eriocheir sinensis) on transplanted submersed macrophyte biomass. The early juvenile crab with 7.0 +/-0.6 mm. carapace width (CW) had little effect on plant biomass, regardless of the stocking densities. However, larger crabs (CW: 18.0 +/-2.2,35.0 +/-3.6, and 60.0 +/-5.7 mm) significantly influenced plant biomass, especially at large stocking densities. Predictive models, using crab body size and stocking density, were generated to demonstrate effect of the mitten crab on the changes Of plant biomass. The results indicate that dense mitten crab populations may adversely affect aquatic plant communities, particularly when its animal food resources are scarce.
Resumo:
1. Plateau pikas Ochotona curzoniae are considered a pest species on the Tibetan Plateau because they compete with livestock for forage and their burrowing could contribute to soil erosion. The effectiveness of pest control programmes in Tibet has not been measured, and it is not known whether changes in livestock management have exacerbated problems with plateau pikas or compromised their control. This study measured the impact of control programmes and livestock management for forage conservation on populations of plateau pikas in alpine meadow in Naqu District, central Tibet, during 2004 and 2005.2. Current techniques for controlling plateau pikas in spring cause large reductions in abundance, but high density-dependent rates of increase result in no differences between treated and untreated populations by the following autumn. Rates of increase from spring to autumn are not influenced by standing plant biomass or concurrent grazing by yaks Bos grunniens and Tibetan sheep Ovis aries.3. In autumn there was significantly lower biomass outside fenced areas with year-round livestock grazing compared with inside fenced areas with equivalent or higher numbers of plateau pikas but predominantly winter grazing by livestock. Inside fenced areas, control of plateau pikas in spring produced no detectable effect on standing plant biomass at the end of the following summer compared with uncontrolled populations of plateau pikas.4. Regardless of their initial density, populations of plateau pikas declined rapidly over winter outside fenced areas where there was very low standing plant biomass in autumn. However, inside fenced areas with higher plant biomass in autumn, low-density populations of plateau pikas declined more slowly than high-density populations.5. Synthesis and applications. Current control programmes have limited effect because populations of plateau pikas can recover in one breeding season. There was no apparent increase in forage production in areas where plateau pikas were controlled. However, plateau pikas appear to benefit from changes in grazing management, with low-density populations declining less over winter inside fenced areas than elsewhere. It was not evident that control programmes are warranted or that they will improve the livelihoods of Tibetan herders.
Resumo:
General expressions used for transforming raw laser-induced fluorescence (LIF) intensity into the population and alignment parameters of a symmetric top molecule are derived by employing the density matrix approach. The molecular population and alignment are described by molecular state multipoles. The results are presented for a general excitation-detection geometry and then applied to some special geometries. In general cases, the LIF intensity is a complex function of the initial molecular state multipoles, the dynamic factors and the excitation-detection geometrical factors. It contains a population and 14 alignment multipoles. How to extract all initial state multipoles from the rotationally unresolved emission LIF intensity is discussed in detail.