I 蓖麻油聚氨酯/聚甲基丙烯酸甲酯AB交联聚合物的研究 II 双阳原油热处理中加入降凝剂的研究

用蓖麻油与TDI反应生成端异氰酸酯基预聚物，再与HEA反应，生成端乙烯基预聚物，以不同比例的MMA与端乙烯基预聚物共聚交联，得到一组组成和交联密度各不相同的ABCP样品；为了分别观察组成和交联密度对材料性能的影响，在交联共聚过程中，以二乙烯基苯作交联点调节剂 ，得到固定组成，交联密度变化和固定交联密度组成变化的两组样品；此外，在固化过程中加入不同含量的丙烯酸（<10%），得到另一组样品，以观察氢键对该体系的影响。反应过程中用化学分析、NMR、IR及平衡溶胀等方法测定反应程度、分子量及交联网的交联密度；同时用动态粘弹谱仪和介电损耗仪测定样品的动态力学性能，转变与松弛及相容性；用材料试验机测试样品的力学性能；通过透射电子显微镜观察材料的形态结构。结果表明：copu/PMMA ABCP是个半相容体系，随硬段含量的增加和交联密度的减小相容性变差。形态结构呈不规则形状，相区尺寸由几A变至几百A，材料的力学性能和阻尼性能明显优子构成它们的均聚物。材料的阻尼值主要受交联密度的影响，玻璃化转变温度则主要受组成控制。氢键对该体系的形态结构有明显影响，丙烯酸含量为7.5%时相容性最差，5%和10%时最好。以双阳昌10号井原油为研究对象选用EVA作原料，以马来酸酐接枝改性，合成ET-6降凝剂。采取在热处理中加入降凝剂的综合处理方法，考察了降凝剂合成的最佳反应条件和降凝剂用量及热处理温度对原油结晶状态及流动性的影响。结果表明，热处理中加入ET-6降凝剂可使蜡的结晶形态发生明显变化，降凝剂用量仅100-500 ppm即可使双阳原油的凝固点由原来的30-31 ℃降至7-9 ℃，原油的低温流动性大为改观。

对金属稀土金属有机配合物的合成、结构及催化性质研究

合成出三类18种双金属稀土金属有机配合物：第一类：Ln-Li双金属π－烯丙基稀土配合物－LiLn(π-C_3H_5)_4 nD(Ln=La、Tb, n=3; Ln=Y、Dy, n=2.5; Ln=Ce、Pr、Nd、Sm、Gd、Er, n=2; D=二氧六环）。第二类：Ln-Mg双金属π－烯丙基稀土配合物-(π-C_3H_5)_2CnCl_5Mg_2(tmed)_2 (Ln=Ce、Nd)和(π-C_4H_7)_2LnCl_5Mg_2(tmed)_2 (Ln=La、Ce、Nd; C_4H_7=i-C_4H_7)。第三类：Ln-Al双金属配合物－[(CF_3CO_2)_3LnHAlR_2·2THF]_2 (Ln=Y、Nd, R=i-Bu; Ln=Eu, R=Et)。用四园X－ray衍射仪在低温下测定了LiCe(π-C_3H_5)_4·4D、[(CF_3CO_2)_3YHAl(i-Bu)_2 2THF]_2、[(CF_3CO_2)_3NdHAl(i-Bu)_2 2THF]_2和[(CF_3CO_2)_3EuHAlEt_2·2THF]_2的晶体结构。对[(CF_3CO_2)_3YHAl(i-Bu)_2·2THF]_2和LiLn(π-C_3H_5)_4 nD类配合物进行了较详细的NMR研究。二维C－H相关NMR谱表明在[(CF_3CO_2)_3YHAl(i-Bu)_2·2THF]_2配合物中6个CF_3CO_2~-有2个羰基的C与H成键，该结果解释了Ln-Al双金属配合物中相应羰基的非平面结构现象。研究表明LiLn(π-CC_3H_5)_4·nD可催化异戊二烯和苯乙烯均聚合；不同配合物中均以Y配合物的活性为最高。(π-C_3H_5)_2CeCl_5Mg_2(tmed)_2对异戊二烯、丁二烯、苯乙烯以及甲基丙烯酸甲酯（MMA）的聚合有较低的催化活性；(π-C_4H_7)_2LnCl_5Mg_2(tmed)_2也对苯乙烯和异戊二烯的聚合有一定的催化活性。分别以LiCe(π-C_3H_5)_4·4D和(π-C_3H_5)_2CeCl_5Mg_2(tmed)_2作为稀土配位催化剂的模型配合物，研究了其催化所得聚异戊二烯的端基结构。表明聚合物均具有烯丙基端基(-CH_2-CH=CH_2)。证明单体在Ce~(3+)和π－烯丙基之间发生了插入反应，聚合按π－烯丙基机理进行。该结果首次为稀土配位催化共轭双烯烃聚合的活性链端π－烯丙基机理提供了直接的实验证据。(π-C_3H_5)_2CeCl_5Mg_2(tmed)_2-Al(i-Bu)_3(Al/Ce(摩尔比)=4))体系对异戊二烯的聚合具有较高的催化活性，所得聚合物仍具有－CH_3-CH=CH_2端基，而没有i-Bu端基。该结果又一次为上述π-烯丙基机理提供了直接的实验证据。发现Ln(CF_3CO_2)_3-AlEt_3体系可催化THF开环聚合。首次实现稀土催化THF开环聚合。研究了Y(CF_3CO_2)_3-HAl(i-Bu)_2-ECH（环氧氯丙烷）体系催化THF开环聚合法性及聚合机理。讨论了各种聚合条件对该体系催化活性的影响。研究了[(CF_3Co_2)YHAl(i-Bu)_2·2THF]_2在ECH存在下催化THF聚合活性并认为该双金属配合物为Y(CF_3CO_2)_3-HAl(i-Bu)_2-ECH体系的活性体。[(CF_3CO_2)_3YHA(i-Bu)_2·2THF]_2和[(CF_3CO_2)_3EuHAlEt_2·2THF]_2均可催化ECH和MMA聚合，所得PMMA的间同(rr)含量可达76.5％。

甲基丙烯酸三苯甲酯不对称共聚行为研究

本论文首次利用共聚合方法获得了在常温下具有光活性的螺旋链共聚物，利用手性配体（-）SP、（+）DDB能合成光活性PTrMA和PDPAA。它们是具有稳定单手螺旋构象的聚合物。研究了不同手性配体对小位阻单体MMA阴离子聚合过程的立体控制作用，并对TrMA与MMA，DPAA与MMA及TrMA与DPAA各组单体在不同手性配体作用下的不对称阴离子共聚合行为进行了研究，提出了螺旋选择不对称聚合的概念。1，首次研究了手性配体（-）SP和（+）DDB对MMA阴离子聚合产物的立体构型的不同影响，利用~1HNMR谱表征了产物结构，发现在手性配体（-）SP存在下，以BuLi, t-BuLi及FLLi引发MMA聚合都得到高间同立构产物，引发剂中烷基阴离子位阻增大，间同立构含量增加。2，进行了MMA对TrMA的螺旋诱导，用不同的手性配体作用下获得的PMMA螺旋活性链在低温下引发TrMA聚合，得到了具有不同旋光方向的poly(MMA-co-TrMA)嵌段共聚物。从而证明了，MMA这种小位阻单体的聚合物虽然在常温下溶液中无法保持螺旋构象，但在低温下溶液中具有螺旋构象。并首次确定了不同手性配体作用下生成的PMMA单手螺旋链的方向。3，首次研究了不同手性配体存在下甲苯溶液中TrMA/MMA和DPAA/MMA及TrMA/DPAA共聚行为。表明不同方向的螺旋链能够选择与它本身立体结构适合的单体进行聚，即在不对称共聚合中存在着螺旋选择。螺旋选择不对称聚合现象的根源在于手性配体对聚合过程的立体指导作用。

二价稀土有机配合物的合成、结构及催化性能

本文在合成二价稀土配合物前体（CH_3Cp）_2SmCl·THF的基础上，合成了一系列取代环戊二烯、环戊二烯二价稀土配合物，并研究其与乙腈及MMA的反应性能。首次以二价稀土配合物为催化剂研究基对苯乙烯，四基丙烯酸酯类，丙烯腈的聚合活性，并发现了催化苯乙烯聚合过程的活化剂，活化剂的加入不仅大大提高二价稀土有机配合物的催化活性，而且使聚合在溶液中即可进行，为聚合机理的研究提供了方便有利的条件。初步研究了聚合机理，进而对所得聚合物进行了表征。

聚环氧氯丙烷聚氨酯互穿网络聚合物研究

本文通过一步法合成了两大类聚氨酯互穿网络聚合物（IPN）。其中第一组分是用端羟基聚环氧氯丙烷（PECH）与异氰酸酯反应合成的具有低玻璃化转变温度（Tg）、高弹性的聚醚型聚氨酯，另一组分是高Tg、高模量的聚甲基丙烯酸甲酯（PMMA）、聚苯乙烯（PS）或者是这两者的共聚物（P（MMA-co-S））。对合成的IPN进行了详细、系统的研究。

Capillary electrophoretic analysis of arsenic species with indirect laser induced fluorescence detection

The development of a method for determining arsenic species by capillary zone electrophoresis (CZE) with indirect laser-induced fluorescence (LIF) is described in this paper. The buffer pH, the concentration of fluorescein, the nature and the concentration of the background electrolytes (BGEs) were defined. When 2.0 mM NaHCO3 (pH 9.28) with 10(-7) M fluorescein was used as the buffer, arsenite (As(lll), dimethylarsonic acid (DMA), monomethylarsonic acid (MMA), and arsenate (As(V)) were all separated from one another. The limits of detection for the four arsenic species were p p in the range of 0.12-0.54 mg/L. This method was used in the analysis of spiked arsenic species in tap and mineral water to demonstrate its usefulness. The results showed that both the recovery and the reproducibility of the developed method were acceptable.

Determination of arsenic species by capillary zone electrophoresis with large-volume field-amplified stacking injection

Determination of arsenic species by large-volume field amplified stacking injection-capillary zone electrophoresis (LV-FASI-CZE) is reported in this paper. Whole column injection was employed. The optimum buffer pH for the separation of weak acids was discussed. It was found that the optimum buffer to analyze the stacked arsenate (As(V)), monomethylarsonate (MMA), and dimethylarsinate (DMA) was 25 mm phosphate at pH 6.5. However, the optimum buffer to analyze the concentrated arsenite (As(III)) was 20 mm phosphate - 10 mm borate at pH 9.28. The limits of detection of the method developed were 0.026 mg/L for As(III), 0.023 mg/L for As(V), 0.043 mg/L for MMA, and 0.018 mg/L for DMA. An enrichment factor of 34-100 for several arsenic species was obtained. In the end, this method was applied to determine the arsenic concentration in the environmental reference materials to show the usefulness of the method developed.

玉米苗期施用缓/控释氮素肥料养分释放特点与土壤生物活性研究

采用盆栽试验,模拟田间生态环境,测定施用不同种缓/控释氮素肥料,玉米苗期土壤尿素态氮、硝态氮、铵态氮含量,脲酶、硝酸还原酶活性、微生物量碳和氮含量变化趋势,比较玉米苗期氮素养分释放、土壤生物活性特点。研究表明,玉米苗期,施用SA+nBPT+U肥料,尿素态氮和NH4+-N的积累量最多,对土壤脲酶活性有显著的抑制作用;SA+U肥料,硝态氮最多;MMA+nBPT+U肥料,尿素自膜内迁移到土壤中的量较少,硝态氮和微生物量最少。包膜与脲酶抑制剂nBPT相结合的缓/控释肥料,对减少硝态氮的生成效果最为明显。施用nBPT+U肥料,微生物量最多。施用不同种缓/控释氮素肥料,土壤硝酸还原酶活性普遍增强,脲酶抑制剂nBPT对土壤硝酸还原酶活性无显著作用;施用不同种缓/控释氮素肥料土壤微生物量碳、氮的变化趋势一致。丙烯酸树脂包膜与脲酶抑制剂相结合的缓/控释肥料控释效果最好。

Dynamic mechanical properties of gel polymer electrolytes containing ionic liquid

The copolymer of acrylonitrile (AN), methyl methacrylate (MMA) and poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) is synthesized in 1-butyl-3-methylimidazolium tetrafluoroborate (BMImBF(4)). The dynamic mechanical properties of the resulting gel polymer electrolytes containing ionic liquid are measured.

In Situ Preparation and Luminescent Properties of CeF3 and CeF3:Tb3+ Nanoparticles and Transparent CeF3:Tb3+/PMMA Nanocomposites in the Visible Spectral Range

CeF3 and CeF3:Tb3+ nanoparticles were prepared by reverse microemulsion with a functional monomer, methyl methacrylate (MMA), as the oil phase, and CeF3:Tb3+/poly (methyl methacrylate) (PMMA) nanocomposites were obtained via polymerization of the MMA monomer. The nanoparticles and nanocomposites have been well characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), low- and high-resolution transmission electron microscope (TEM), selected-area electron diffraction (SAED), thermogravimetric analysis (TGA), UV/vis transmission spectra, photoluminescence excitation, and emission spectra and luminescence decays. The well-crystallized CeF3 and CeF3:Tb3+ nanoparticles are spherical with a mean diameter of 15 nm. They show the characteristic emission of Ce3+ 5d-4f (313 nm, D-2-F-2(5/2); 323 nm, D-2-F-2(7/2)) and Tb3+ D-5(4)-F-7(J) (J = 6-3, with D-5(4)-F-7(5) green emission at 541 nm as the strongest one) transitions, respectively.

In situ preparation and luminescent properties of LaPO4:Ce3+, Tb3+ nanoparticles and transparent LaPO4:Ce3+, Tb3+/PMMA nanocomposite

LaPO4:Ce3+, Tb3+ nanoparticles were prepared by the reverse microemulsion with functional monomer, methyl methacrylate (MMA) as oil phase, and LaPO4:Ce3+, Tb3+/poly(methyl methacrylate) (PMMA) nanocomposite was obtained via polymerization of MMA monomer. The nanoparticles and nanocomposite have been well characterized by XRD, SEM, TEM, UV/vis spectrum, photoluminescence excitation and emission spectra and luminescence decays. The obtained solid nanocomposite LaPO4:Ce3+, Tb3+/PMMA is highly transparent and exhibits strong green photoluminescence upon UV excitation, due to the integration of luminescent LaPO4:Ce3+, Tb3+ nanoparticles. The luminescent lifetime of Tb3+ is determined to be 1.25 ms in the nanocomposite. (C) 2009 Elsevier Inc. All rights reserved.

Relaxation time and conductivity of comb-like gel polymer electrolytes

Using the copolymer of acrylonitrile (AN), methyl methacrylate (MMA), and poly(ethylene glycol) methyl ether methacrylate as a backbone and poly(ethylene glycol) methyl ether (PEGME) with 1100 molecular weight as side chains, comb-like gel polymers and their Li salt complexes were synthesized. The dynamic mechanical properties and conductivities were investigated. Results showed that the gel copolymer electrolytes possess two glass transitions: alpha-transition and beta-transition. Based on the time-temperature equivalence principle, a master curve was constructed by selecting T. as reference temperature. By reference to T-0 = 50 degrees C, the relation between log c, and c was found to be linear. The master curves are displaced progressively to higher frequencies as the content of plasticizer is increased. The relation between log tau(p) and the content of plasticizer is also linear.

Chain propagation kinetics on melt grafting reaction

Graft copolymerization in the molten state is of fundamental importance as a probe of chemical modification and reactive compatibilization. However, few grafting kinetic studies on reactive extrusion have been carried out because of the inherent difficulties, as expected. In this work, we have studied chain propagation kinetics on melt grafting using pre-irradiated linear low density polyethylene (LLDPE) and three monomers, acrylic acid (AA), methacrylic acid (MAA), and methyl methacrylate (MMA), as the model system. We measured the apparent chain propagation rate coefficients of grafting (k(p,g)) and homopolymerization (k(p,h)) at an initial stage for the melt grafting by FT-IR spectroscopy and electron spin resonance spectroscopy. It was observed that the convective mixing affected the rate coefficients. The magnitude of k(p,h) and k(p,g) were in the same order, but k(p,h) was slightly larger than k(p,g) The k(p,g) of the three grafting systems increased in the order: LLDPE/MMA < LLDPE/MAA < LLDPE/AA. These results are explained in terms of phase separation, solubility, and inherent reactivity of the monomer.

Morphology development of ultrathin symmetric diblock copolymer film via solvent vapor treatment

We have followed the time development of the microdomain structure in symmetric diblock copolymer poly(styrene-b-methyl methacrylate), P(S-b-MMA), ultrathin films via PMMA-selective solvent vapor treatment by atomic force microscopy (AFM). After preparation on a substrate preferentially attracting the PMMA block, PS forms a continuous layer at a film's free surface. With subsequent solvent vapor treatment, the film gradually shows a well-ordered hexagonally packed nanocylinders structure. It is shown that only when the film thickness is less than the 1/2L(0) (lamellar repeat spacing), and exposed to PMMA block selective solvent for an appropriate time, can the well-ordered hexagonally packed nanocylinders form. On an extended solvent vapor treatment, a mixed morphology containing nanocylinders and stripes appears, followed by the striped morphologies. When the annealing time is long enough, the film comes back to the flat surface again, however, with PMMA instead of PS dominating the free surface.

An effective approach to synthesis of poly(methyl methacrylate)/silica nanocomposites

A novel synthetic route for nearly monodispersed poly(methyl methacrylate)/SiO2 composite particles (PMSCP) is reported. Silica nanoparticles modified with oleic acid were used as 'seeds'. Methyl methacrylate (MMA) monomer was copolymerized with oleic acid via in situ emulsion polymerization, in the presence of an initiator; it resulted finally in the formation of composites with core-shell morphology. The composite particles were examined by transmission electron microscopy (TEM), scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS) and thermogravimetric analysis (TGA). The number of silica particles inside the composite particles increases with an increase in the silica concentration. The effect of grafted silica concentration on the morphology of PMSCP is also reported in detail. It was found by thermogravimetric analysis that PMSCP show a potential application for fire retardance.