Morphological characteristics and phylogenetic relationship of Anabaena species from Lakes Dianchi and Erhai, China

Although Anabaena is one of the most prevalent planktonic freshwater genus in China, there are few taxonomic reports of Anabaena strains by morphology and genetics. In this study, morphological characteristics and phylogenetic relationships of seven Anabaena strains isolated from two plateau lakes, Lakes Dianchi and Erhai, were investigated. Morphological characteristics such as morphology of filament, cellular shapes and sizes, relative position of heterocytes and akinetes, and presence or absence of aerotopes, were described for these seven strains. Phylogenetic relationships were determined by constructing 16S rRNA gene tree using the neighbor-joining algorithm. The seven strains were morphologically identified as three groups, and phylogenetic analysis based on 16S rRNA gene sequences also showed that these seven strains were in three groups. Strains EH-2, EH-3, and EH-4 were in group A belonging to the Anabaena circinalis and A. crassa group, and strains DC-1, DC-2, and EH-1 were in group B and identified as A. flos-aquae. Strain DC-3 without aerotopes was significantly different from the other isolated strains and was determined as A. cylindrica.

Redescription of Myxobolus pyramidis chen, 1958 (Myxosporea : Bivalvulida)

Redescription of Myxobolus pyramidis Chen, 1958, from gill lamellae of allogynogenetic gibel carp, Carassius auratus gibelio (Bloch), is presented in this paper to complete Chen's description. The diagnostic characters of the myxosporidia are: ovoid round, greyish-white polysporous plasmodia, averaging (159 +/- 21)x(72 +/- 6.5) mu m in size; spore pyriform in front view with smooth surface and symmetrical valves, convex-shaped in sutural view with straight and thick sutural line, averaging (10.5 +/- 1.1)x(10.3 +/- 0.9)x(6.1 +/- 0.2) mu m in size; two equal pyriform polar capsules averaging (5.5 +/- 0.7)x(3.5 +/- 0.2) mu m in size with distinct intercapsular process and polar filament wounded in five to six coils. The histological effects of the pathogen were observed by light microscopy, and the parasite-host relationship was discussed.

Effects of solar UV radiation on morphology and photosynthesis of filamentous cyanobacterium Arthrospira platensis

To study the impact of solar UV radiation (UVR) (280 to 400 nm) on the filamentous cyanobacterium Arthrospira (Spirulina) platensis, we examined the morphological changes and photosynthetic performance using an indoor-grown strain (which had not been exposed to sunlight for decades) and an outdoor-grown strain (which had been grown under sunlight for decades) while they were cultured with three solar radiation treatments: PAB (photosynthetically active radiation [PAR] plus UVR; 280 to 700 nm), PA (PAR plus UV-A; 320 to 700 nm), and P (PAR only; 400 to 700 nm). Solar UVR broke the spiral filaments of A. platensis exposed to full solar radiation in short-term low-cell-density cultures. This breakage was observed after 2 h for the indoor strain but after 4 to 6 h for the outdoor strain. Filament breakage also occurred in the cultures exposed to PAR alone; however, the extent of breakage was less than that observed for filaments exposed to full solar radiation. The spiral filaments broke and compressed when high-cell-density cultures were exposed to full solar radiation during long-term experiments. When UV-B was screened off, the filaments initially broke, but they elongated and became loosely arranged later (i.e., there were fewer spirals per unit of filament length). When UVR was filtered out, the spiral structure hardly broke or became looser. Photosynthetic 0, evolution in the presence of UVR was significantly suppressed in the indoor strain compared to the outdoor strain. UVR-induced inhibition increased with exposure time, and it was significantly lower in the outdoor strain. The concentration of UV-absorbing compounds was low in both strains, and there was no significant change in the amount regardless of the radiation treatment, suggesting that these compounds were not effectively used as protection against solar UVR. Self-shading, on the other hand, produced by compression of the spirals over adaptive time scales, seems to play an important role in protecting this species against deleterious UVR. Our findings suggest that the increase in UV-B irradiance due to ozone depletion not only might affect photosynthesis but also might alter the morphological development of filamentous cyanobacteria during acclimation or over adaptive time scales.

New data on Myxobolus longisporus (Myxozoa : Myxobolidae), a gill infecting parasite of carp, Cyprinus carpio haematopterus, from Chinese lakes

The original description of Myxobolus longisporus Nie et Li, 1992, the species infecting gills of Cyprinus carpio haematopterus L., is supplemented with new data on the spore morphology and pathogenicity. Spores are elongate pyriform with pointed anterior end, 15.7 (15.5-16.5) mum long, 6.7 (6-8) mum wide and 5.5 mum thick. Sutural ridge is straight and narrow. Mucus envelope is lacking. Two equal-sized elongate pyriform polar capsules are 8.5 mum long and 2.5 mum wide with convergent long axes. Polar filament coiled perpendicularly to the long axis of the capsule makes 9 (8-10) turns. Posterior end of polar capsules exceeds mid-spore by 15-20%. Cyst-like plasmodia are localised in the gill secondary lamellae. The infection is described in adult big host specimens. Gross lesions manifested as dark red colouration of gill tissues were restricted to the ventral part of the first gill arches. Remarkable site specificity (apical part of secondary lamellae) was observed in the course of development of microscopic lesions. M. longisporus is characterised also on the molecular level using sequences of SSU rRNA gene. Phylogenetic analysis based on these sequences has allowed clearer phylogenetic relationships to be established with other species of the genus Myxobolus sequenced to date.

Description of two new myxosporean species parasitic in freshwater fishes from the Yangtze River in China

Two new species of myxosporeans (Myxosporea: Myxidiidae), Myxidium tuanfengensis sp. n. and Zschokkella saurogobionis sp. n., Parasitic in freshwater fishes collected from the Yangtze River of China are described in this paper. M. tuanfengensis was found in the liver parenchyma and intestine lumen of Leptobotia taeniops Sauvage, 1878, while Z. saurogobionis was found in the gall bladder of Saurogobio dumerili Bleeker, 1871. The diagnostic characters of M. tuanfengensis are: round or elliptical polysporous plasmodia averaging 118 mum in size; spore oval in frontal view with smooth surface and nearly spindle-shape in sutural view with slightly sinuous sutural ridge, averaging 19.5 x 9.75 x 8.9 mum in size; two large spherical polar capsules 6.8 mum in diameter, with polar filament wound in 4 to 5 coils. The diagnostic characters of Z. saurogobionis are: spore elliptical in both frontal and sutural view measuring 18.3 x 9.8 x 10.8 mum in size; fine sutural ridge in S-form, spore shell marked with 10 to 12 distinct lines paralleled with the sutural line; two spherical polar capsules, 6.7 mum in diameter, with polar filament in 5 coils.

Culture of the terrestrial cyanobacterium, Nostoc flagelliforme (Cyanophyceae), under aquatic conditions

Both colonies and free-living cells of the terrestrial cyanobacterium, Nostoc flagelliforme (Berk. & Curtis) Bornet & Flahault, were cultured under aquatic conditions to develop the techniques for the cultivation and restoration of this endangered resource. The colonial filaments disintegrated with their sheaths ruptured in about 2 days without any desiccating treatments. Periodic desiccation played an important role in preventing the alga from decomposing, with greater delays to sheath rupture with a higher frequency of exposure to air. The bacterial numbers in the culture treated with seven periods of desiccation per day were about 50% less compared with the cultures without the desiccation treatment. When bacteria in the culture were controlled, the colonial filaments did not disintegrate and maintained the integrity of their sheath for about 20 days even without the desiccation treatments, indicating the importance of desiccation for N. flagelliforme to prevent them from being disintegrated by bacteria. On the other hand, when free-living cells obtained from crushed colonial filaments were cultured in liquid medium, they developed into single filaments with sheaths, within which multiple filaments were formed later on as a colony. Such colonial filaments were developed at 15, 25, and 30degreesC at either 20 or 60 mumol photons.m(-2).s(-1); colonies did not develop at 180 mumol photons.m(-2).s(-1), though this light level resulted in the most rapid growth of the cells. Conditions of 60 mumol photons.m(-2).s(-1) and 25degrees C appeared to result in the best colonial development and faster growth of the sheath-held colonies of N. flagelliforme when cultured indoor under aquatic conditions.

Structual and optoelectronic properties of polycrystalline silicon thin films prepared by hot-wire chemical vapor deposition at low temperatures

Polycrystalline silicon thin films were prepared by hot-wire chemical vapor deposition ( HWCVD) on glass at 250 degreesC with W or Ta wire as the catalyzers. The structual and optoelectronic properties as functions of the filament temperature, deposition pressure and the filament-substrate distance were studied, and the optimized polycrystalline silicon thin films were obtained with X-c > 90 % ( X-c denotes the crystalline ratio of the film), crystal grain size about 30-40nm, R-d approximate to 0.8nm/s, sigma(d) about 10(-7) - 10(-6) Omega(-1) cm(-1), Ea(a) approximate to 0.5eV and E-opt less than or equal to 1.3eV.

Influence of heated catalyzer on thermal distribution of substrate in HWCVD system

Based on Stefan-Boltzman and Lambert theorems, the radiation energy distribution on substrate (REDS) from catalyzer with parallel filament geometry has been simulated by variation of filament and system layout in hot-wire chemical vapor deposition. The REDS uniformity is sensitive to the distance between filament and substrate d(f-s) when d(f-s) less than or equal to 4 cm. As d(f-s) > 4 cm, the REDS uniformity is independent of d(f-s) and is mainly determined by filament number and filament separation. Two-dimensional calculation shows that the REDS uniformity is limited by temperature decay at filament edges. The simulation data are in good agreement with experiments. (C) 2003 Elsevier Science B.V. All rights reserved.

Blue-violet photoluminescence from large-scale highly aligned boron carbonitride nanofibers

We report on the strong blue-violet photoluminescence (PL) at room temperature from the large-scale highly aligned boron carbonitride (BCN) nanofibers synthesized by bias-assisted hot filament chemical vapor deposition. The photoluminescence peak wavelength shifts in the range of 470-390 nm by changing the chemical composition of the BCN nanofibers, which shows an interesting blue and violet-light-emitting material with adjustable optical properties. The mechanism for the shift of the PL peaks at room temperature is also discussed. (C) 2000 American Institute of Physics. [S0003-6951(00)04427-2].

Influence of heated catalyzer on thermal distribution of substrate in HWCVD system

Based on Stefan-Boltzman and Lambert theorems, the radiation energy distribution on substrate (REDS) from catalyzer with parallel filament geometry has been simulated by variation of filament and system layout in hot-wire chemical vapor deposition. The REDS uniformity is sensitive to the distance between filament and substrate d(f-s) when d(f-s) less than or equal to 4 cm. As d(f-s) > 4 cm, the REDS uniformity is independent of d(f-s) and is mainly determined by filament number and filament separation. Two-dimensional calculation shows that the REDS uniformity is limited by temperature decay at filament edges. The simulation data are in good agreement with experiments. (C) 2003 Elsevier Science B.V. All rights reserved.

棘蛙族(Tribe Paini)精子形态结构及精巢年周期研究

棘蛙族(Tribe Paini)隶两栖纲(Amphibia)、无尾目(Anura)、蛙科(Ranidae)、叉舌蛙亚科(Dicroglossinae)，由棘蛙属(Paa)、倭蛙属(Nanorana) 和沙巴蛙属(Chaparana)构成（Dubois,1992）。由于特殊的形态特征和染色体核型，棘蛙族受到国内外学者的广泛重视和研究，但是到目前为止，棘蛙族的系统发育关系尚未明晰，族下属种的分类和归属问题还有待进一步研究和新的证据出现。本文通过光学显微镜、电子显微镜和石蜡切片对棘蛙族10 物种的精子和精巢进行研究，旨在了解棘蛙族精子的形态、量度、超微结构特征及不同季节精巢结构的变化规律，同时为棘蛙族的系统研究提供新的依据，也为棘蛙族濒危物种的保护和经济物种的繁殖提供基础资料。研究结果表明：棘蛙族各属物种精子的形态基本相似，精子整体呈线形，由头部、中片和尾部构成。精子头部呈长条状，顶体呈锥状，位于头部顶端并向前伸出，中片较长，尾部波动弯曲。棘蛙族各属物种精子量度差异较大，将各属物种精子头部、中片、尾部、头宽、尾宽的量度数据进行聚类分析，结果表明棘蛙族10 物种可分为三类：第一类包括棘侧蛙、合江棘蛙、小棘蛙、棘腹蛙和棘胸蛙，特点是精子较短，全长在72.6～103.35µm 之间；第二类包括倭蛙、高山倭蛙、腹斑倭蛙，特点是精子较长，全长在107.74～129.75µm 之间；第三类包括隆肛蛙和双团棘胸蛙，特点是精子最长，全长在145.89～165.84µm 之间。棘蛙族各属精子超微结构基本相似：精子头部由顶体、细胞核构成；中片由中心粒、线粒体构成；尾部由单根轴丝构成。精子顶体横切呈圆环状，细胞核电子密度高；线粒体为卵圆形，呈环状围绕轴丝排列，线粒体数目较多，约30层；尾部轴丝为典型的9＋2结构，即由2根中央微管和9对外周微管组成。不同季节的倭蛙精巢结构变化表明倭蛙精巢每年只有一个生精周期，生精周期始于7 月，繁殖季节从5 月到6 月，生精高峰期为9 月；根据倭蛙不同季节精巢结构的变化，可将生精周期分为3 个阶段：第一阶段从7 月到9 月，为精子形成期；第二阶段从10 月到翌年4 月，为精子的贮存阶段，也即倭蛙的冬眠期；第三阶段从5 月到6 月，为精子的排放阶段，即倭蛙的繁殖期。不同季节的隆肛蛙精巢结构变化表明5 月为隆肛蛙的繁殖高峰期。根据棘蛙族各属精子的形态、量度和超微结构特征，结合已有的棘蛙族形态学、生态学、染色体核型及系统学研究成果，本文认为：1．基于精子数据对棘蛙族的划分和基于形态学及分子系统学数据对棘蛙族的划分均有相同之处，精子形态结构可为棘蛙族的系统研究提供新的证据。2． 棘蛙族各属精子的形态、量度及超微结构不仅与蛙科其他属种有明显差异，而且在无尾类中也较为特殊，精子学研究结果支持将棘蛙族从蛙科中分离出来，归隶于叉舌蛙科的叉舌蛙亚科的系统学修正。3. 精子的顶体、细胞核、中片的形态结构及量度可作为蛙科的分类指标。On the base of unique morphological and kyrotype characters, Dubois(1992)recognized three genera Paa, Narnorana, Chaparana as tribe Paini, which is amember of Dicroglossinae, Ranidae. In present study, the sperm shape, size andultrastructure of 10 paini species were investigated through the light and electronmicroscope, and testis structure of N. pleskei and F. quadrana was also studied. Wesuppose this study could offer some spermatological evidence to phylogeny andreproduction study of tribe Paini. The results were as follows:The sperm shape of tribe paini is homologically similar, the spermatozoa arefiliform, composed of elongate head, long mid-piece and waved tail. The acrosome isapically associated with the nucleus and extend anteriorly.The sperm length of tribe paini differ remarkably among genera. Cluster for thelength of sperm head, mid-piece, tail, total length, head-width, tail-width of ten painifrogs indicated the 10 species could be separated into three groups: GroupⅠcontainsP. shini, P. robertingeri, P. spinosa, P. exilispinosa, P. boulengeri, the spermatozoa ischaracterized with short in total length, ranging from 72.6µm to 103.35µm; GroupⅡcontains N. pleskei, N. parkeri, N. ventripunctata, the spermatozoa ischaracterized with relatively long in total length, ranging from 107.74µm to129.75µm; Group Ⅲ contains F. quadrana and P. yunnanensis, the spermatozoa is characterized with longest in total length, ranging from 145.89µm to 165.84µm. thethree groups based on spermatological data is partially match the classification basedon morphological and molecular data.The ultrastructure of spermatozoa in tribe paini is also basic similar, includingacrosome vescile, nuleus of the head proper, centriole, mitochondriol of themid-pieces, axoneme of the tail. The acrosome vescle is circle in TEM transversesection, the density of nucleus is high; The mitochondrions is oval, surrounding theaxial filament with about 30 layers of mitochondria; The axoneme has the typical 9+2pattern of microtubules.The seasonal changes in testis of N. pleskei indicates it has only onespermatogenesis circle, which begin in July, the reproduction season is from May toJune, the spermatogenesis is active in September. On the base of seasonal changes intestis, the spermatogenesis circle can be separated into three stages: In stageⅠfromJuly to September, spermatids are formed; In stage Ⅱ from October to April next year,the spermatozoa are stored in testis,which is the hibernated period; In stage Ⅲ fromMay to June, mature spermatozoa were released from the testis, which is thereproduction season of N. pleskei. As to F. quadrana, reproduction is active in May.With the previous study of morphology, ecology, karyotypes and phylogenyresearch of tribe Paini, the spermatological data in present study suggests:1. The spermatological classification of tribe paini is partially consistant with themorphological and molecular classification respectively.2.The sperm morphology and ultrustructure of tribe paini is unique not only inthe family Ranida but also in Anura, which suggest the tribe paini is monophyletic andmight be transfered from the family Ranida to the family Dicroglossidae based onmolecular evidence.3. The acrosome, nuleus, shape, length and ultrastructure of mid-piece can beused as an alternative taxonomic character in Anura.

Dynamics of Vortex-Wave under a Travelling-Wave Modulation

The mecha nism of destabilization is studied for the rotating vortices (scroll waves and spiral waves) in excitable media induced by a parameter modulation in the form of a travelling-wave. It is found that a rigid rotating spiral in the two-dimensional (2D) system undergoes asynchronized drift along a straightline, and a 3D scrolling with its filament closed into a circle can be reoriented only if the direction of wavenumber of a travelling-wave perturbation is parallel to the ring plane. Then, in order to describe the behaviour of the synchronized drift of spiral wave and the reorientation of scrollring, the approximate formulas are given to exhibit qualitative agreements with the observed results.

长灯丝电子枪的设计与控制

近年来，辐照加工技术及产品已经在农业、材料、电工、电子、医疗、食品等行业得到应用和发展，与相关行业结合为推动传统产业的技术改造方面发挥了独特的作用。为了适应生产的需要，本文在实验室设备的基础上对长灯丝电子枪的设计与控制进行了分析和尝试。加速器的外部结构是加速器在正常运行的基本保证，本文在对击穿电场计算的基础上给出了加速器外部结构设计的尺寸，对于影响束流纵向分布的主要因素—长灯丝的下垂，本文给出了其挠度的计算公式，并根据灯丝的物理特性和发射电子的冷端效应对其约束条件进行了分析，给出了灯丝约束的基本模型。栅压值的大小与栅极缝的大小是束流引出的重要环节，本文通过对简化模型的束流光学计算，分析了束流引出大小的原因。通过对被控对象—束流的分析，我们采用了传统的PID与微分先行控制器结合的控制算法对束流进行控制，在实验室条件得以实现。并对束流传动装置在辐照剂量的限制下实现了动态控制。控制软件设计主要讨论了Windows操作系统的特点及在其下实现实时性的方法，采用面向对象的编程方法提高了程序的可读性，可移植性和可维护性。

Atomic force microscopic study of low temperature induced disassembly of RecA-dsDNA filaments

The assembly and disassembly of RecA-DNA nucleoprotein filaments on double-stranded DNA (dsDNA) or single-stranded DNA (ssDNA) are important steps for homologous recombination and DNA repair. The assembly and disassembly of the nucleoprotein filaments are sensitive to the reaction conditions. In this work, we investigated different morphologies of the formed nucleoprotein filaments at low temperature under different solution conditions by atomic force microscopy (AFM). We found that low temperature and long keeping time could induce the incomplete disassembly of the formed nucleoprotein filaments.