Prediction and suppression of strong dispersive coupling in microracetrack channel drop filters

For a four-port microracetrack channel drop filter, unexpected transmission characteristics due to strong dispersive coupling are demonstrated by the light tunneling between the input-output waveguides and the resonator, where a large dropping transmission at off-resonance wavelengths is observed by finite-difference time-domain simulation. It causes a severe decline of the extinction ratio and finesse. An appropriate decrease of the coupling strength is found to suppress the dispersive coupling and greately increase the extinction ratio and finesse, a decreased coupling strength can be realized by the application of an asymmetrical coupling waveguide structure. In addition, the profile of the coupling dispersion in the transmission spectra can be predicted based on a coupled mode theory analysis of an equivalent system consisting of two coupling straight waveguides. The effects of structure parameters on the transmission spectra obtained by this method agree well with the numerical results. It is useful to avoid the strong dispersive coupling region in the filter design. (c) 2007 Optical Society of America.

Experiments and their analysis for self-assembly growth of GaN quantum dots via MOCVD

In recent years, growth of GaN-based materials-related quantum dots has become a hot topic in semiconductor materials research. Considerable efforts have been devoted to growth of self-assembled quantum dots of GaN-based materials via MOCVD (Metal Organic Chemical Vapor Deposition) and there are a lot of relevant literatures. There is, however, few review papers for the topic. In this paper, different experimental methods for fabrication of quantum dots of GaN-based materials via MOCVD are critically reviewed and the experimental conditions and parameters, which may affect growth of the quantum dots, are analyzed, with an aim at providing some critical reference for the related future experiment research.

LD side-pumped high beam quality passive Q-switched and mode-locked Nd:YAG laser based on SESAM

We report a LD side-pumped fundamental-mode (Mx(2) = 1.35 and My(2) = 1.27) passive Q-switched and mode-locked Nd:YAG laser based on a semiconductor saturable absorber mirror (SESAM). At a pump current of 12.5 A, the average output power of 5.68 W with 80 kHz repetition rate and 2 mu s pulse width of the Q-switched envelope was generated. The repetition rate of the mode-locked pulse within the Q-switched envelope of 88 MHz was achieved.

智能玻璃建筑节能特性分析

智能玻璃能够根据人的意愿或者外界环境的变化动态的调节太阳光的输入，是新一代的建筑节能玻璃，目前引起广泛的关注。本文选取了两种典型的智能玻璃——电致变色玻璃和VO2热色玻璃，采用动态能耗分析软件EnergyPlus分别对其建筑节能特性进行了分析，具体研究内容如下： （1）讨论了电致变色玻璃不同控制方式对其节能效果的影响。结果表明，电致变色玻璃选用合适的控制方式可以显著降低建筑的能耗，但如果控制方式选用不当，采用电致变色玻璃后建筑的能耗反而会高于采用普通白玻的能耗。此外，无论在何种控制方式下，采用电致变色/LOW-E的节能效果都要优于电致变色/白玻中空玻璃。 （2）对VO2光学薄膜的膜系结构进行了优化，研究了外观颜色与膜层厚度的关系，设计出的TiO2(135nm)/VO2(50nm)/ITO(45nm)/glass三层膜结构相对于VO2(50nm)/glass的单层膜结构，太阳能调节量提高了从3.7%提高到9.8%，半导体状态时的可见光透过率从33.6%提高到55.5%，金属状态时的可见光透过率从34.0%提高到50.0%，同时半导体与金属状态时的膜面发射率都有很大程度的降低。 （3）研究了VO2热色玻璃的热学性能和建筑节能特性，重点分析了膜层结构、膜面位置、建筑的地理位置等因素对VO2热色玻璃建筑节能效果的影响。结果表明，对于单层VO2热色玻璃，其功能膜面朝向室内比朝向室外可以获得更好的节能效果，而对于由VO2热色玻璃与白玻组成的双层玻璃，其功能膜面位于室内玻璃的外侧时VO2很难起到相应的调节作用。另外，与其他类型的玻璃相比，虽然一定膜层结构下VO2热色玻璃在不同地区的建筑能耗低于白玻，但是在全年以采暖为主的严寒地区和全年以空调为主的夏热冬暖地区，VO2热色玻璃的节能效果分别不及高透型和遮阳型LOW-E玻璃。

用MOCVD法生长GaN基自组装量子点的相关实验及其分析

GaN基相关材料的量子点生长是半导体材料研究的一个热点，尤其是用MOCVD方法生长GaN基自组装量子点占了相当的比例，因此相关的文献较多，但综述性文章却不多见。鉴于此，本文综述了用MOCVD法制备GaN基量子点的不同实验方法，并对影响量子点牛长的实验条件和参数做了简要的分析。希望能够对相关的实验研究工作提供一些参考。

Broadly Tunable Grating-Coupled External Cavity Laser With Quantum-Dot Active Region

A broadly tunable and high-power grating-coupled external cavity laser with a tuning range of more than 200 nm and a similar to 200-mW maximum output power was realized, by utilizing a gain device with the chirped multiple quantum-dot (QD) active layers and bent waveguide structure. The chirped QD active medium, which consists of QD layers with InGaAs strain-reducing layers different in thickness, is beneficial to the broadening of the material gain spectrum. The bent waveguide structure and facet antireflection coating are both effective for the suppression of inner-cavity lasing under large injection current.

A study of the influence of initial liquid volume on the capillary flow in an interior corner under microgravity

In this work the influence of initial liquid volume on the capillary flow in an interior corner is studied systematically by microgravity experiments using the drop tower, under three different conditions: the Concus-Finn condition is satisfied,close to and dissatisfied. The capillary flow is studied by discussing the movement of tip of the meniscus in the corner. Experimental results show that with the increase of initial liquid volume the tip location increases for a given microgravity time, the achievable maximum tip velocity increases and the flow reaches its maximum tip velocity earlier However, the results for the three different conditions show some difference. (C) 2010 Elsevier Ltd All rights reserved

Fiber Bragg Grating Sensor for Strain Sensing in Low Temperature Superconducting Magnet

Fiber Bragg grating (FBG) sensor for monitoring the electromagnetic strain in a low temperature superconducting (LTS) magnet was studied. Before used to LTS magnet strain sensing, the strain response of the sensor with 1.54-mu m wavelength at liquid helium was experimentally studied. It was found that the wavelength shift showed good linearity with longitudinal applied loads and the strain sensitivity is constant at 4.2 K. And then, the hoop strain measurement of a LTS magnet was carried out on the basis of measured results. Furthermore, the finite element method (FEM) was used to simulate the magnet strain. The difference between the experimental and numerical analysis results is very small.

Fiber Bragg Grating Sensor for Strain Sensing in Low Temperature Superconducting Magnet

Fiber Bragg grating (FBG) sensor for monitoring the electromagnetic strain in a low temperature superconducting (LTS) magnet was studied. Before used to LTS magnet strain sensing, the strain response of the sensor with 1.54-mu m wavelength at liquid helium was experimentally studied. It was found that the wavelength shift showed good linearity with longitudinal applied loads and the strain sensitivity is constant at 4.2 K. And then, the hoop strain measurement of a LTS magnet was carried out on the basis of measured results. Furthermore, the finite element method (FEM) was used to simulate the magnet strain. The difference between the experimental and numerical analysis results is very small.