Sequence of genome segments 1, 2, and 3 of the grass carp reovirus (Genus Aquareovirus, family Reoviridae)

The genome segments 1, 2, and 3 of the grass carp reovirus (GCRV), a tentative species assigned to genus Aquareouirus, family Reouiridae, were sequenced. The respective segments 1, 2, and 3 were 3949, 3877, and 3702 nucleotides long. Conserved moths 5' (GUUAUUU) and 3' (UUCAUC) were found at the ends of each segment. Each segment contains a single ORF and the negative strand does not permit identification of consistent ORFs. Sequence analysis revealed that VP2 is the viral polymerase, while VPI might represent the viral guanyly/methyl transferase (involved in the capping process of RNA transcripts) and VP3 the NTPase/helicase (involved in the transcription and capping of viral RNAs), The highest amino acid identities (26-41%) were found with orthoreovirus proteins. Further genomic characterization should provide insight about the genetic relationships between GCRV, aquareoviruses, and orthoreoviruses, It should also permit to precise the taxonomic status of these different viruses. (C) 2000 Academic Press.

Fabrication and characterization of GaN-based LEDs grown on nanopatterned sapphire substrates

Sapphire substrates were nanopatterned by dry (inductively coupled plasma, ICP) etching to improve the performance of GaN-based light-emitting diodes (LEDs). GaN-based LEDs on nanopatterned sapphire substrates (NPSS) were fabricated by metal organic chemical vapor deposition (MOCVD). The characteristics of LEDs fabricated on NPSS prepared by dry etching were studied. The light output power and wall-plug efficiency of the LEDs fabricated on NPSS were greater than those of the conventional LEDs fabricated on common planar sapphire substrates when the injection currents were the same. The LEDs on NPSS and common planar sapphire substrates have similar I-V characteristics.

Fabrication of triplexers based on flattop SOI AWG

A triplexer is fabricated based on SOI arrayed waveguide gratings (AWGs). Three wavelengths of the triplexer operate at different diffraction orders of an arrayed waveguide grating. The signals of 1490 nm and 1550 nm, which are input from central input waveguide of an AWG, are demultiplexed and the signal of 1310 nm, which is input from central output waveguide of an AWG, is uploaded. The tested results show that the downloaded and uploaded signals have flat-top response. The insertion loss is 9 dB on chip, the nonadjacent crosstalk is less than -30 dB for 1490 nm and 1301 nm, and is less than -25 dB for 1550 nm, the 3 dB bandwidth equates that of the input light source.

基于量化权限的门限访问控制方案

研究了在引入量化权限观点后从访问控制角度实现秘密保护的问题.元权限是从哲学上"质"和"量"的角度认识传统意义上的权限所探究出的新概念,较以往访问控制中认识和使用权限而言,它全面而深入地反映了权限这一概念的本质.进一步结合门限思想和基于角色的访问控制机制所提出的基于量化权限的门限访问控制方案,从访问控制的角度研究了秘密保护问题.在秘密保护方面,基于量化权限的门限访问控制方案具有一些独特的优点,比如分发给参与者的秘密分片和要保护的秘密无知识上的联系、可以反映出参与者信任度的差异以及运算量低.

求和生成器的相关性分析

J.Dj,Golic运用线性序列电路逼进的方法来分析具有任意个输入的求和生成器,他猜想可以通过这种方法来获得所有具有最大相关系数的输入和输出线性函数对,但是他未给出证明。利用Walsh变换技术证明了当n是偶数的时候这个猜想成立。另外,还研究了求和生成器的相关系数总和,发现它与带1比特组合器的相关系数总和非常类似。

不同植物生长调节剂对梭梭幼苗移栽成活率及肉苁蓉寄生率的影响

目的:研究植物生长调节剂对梭梭幼苗移栽成活率及肉苁蓉寄生率的影响。方法:以不同浓度的二氢茉莉酸丙酯(PDJ)与生根粉组合对梭梭幼苗进行浸根处理,用SAS软件对梭梭接种成活率以及肉苁蓉寄生情况等方面进行显著性检验及主成分分析。结果:PDJ处理对于梭梭接种成活率以及肉苁蓉寄生率、寄生数目、肉苁蓉大小等各方面都有促进作用,但对提高梭梭幼苗移栽成活率无显著影响。其中高浓度PDJ(1×10-5mol/L)处理及生根粉处理可提高梭梭接种成活率,低浓度PDJ(1×10-6mol/L)处理可明显提高肉苁蓉寄生率;而加入生根粉的处理对于肉苁蓉寄生有抑制作用。主成分分析表明移栽成活率、接种成活率、寄生率、肉苁蓉平均数目可用于反映植物生长调节剂的作用效果,且PDJ处理的综合效果最好。结论:可采用PDJ浸根的方法提高梭梭幼苗成活率及肉苁蓉寄生率。

利用GaAs基上InGaAs应变层制备有序排列的InAs量子点

在GaAs基In x Ga1-xAs( x =0.15)应变层上生长了InAs 量子点(QD)层,通过分析各层之间的应力状况和位错的演变过程,配合生长过程中对反射式高能电子衍射仪(RHEED)实时监测,并观察生长后的表面形貌,发现可以通过控制应变层厚度来控制应变层表面布纹结构的宽度,而且在应变层厚度低于位错增殖的临界厚度时布纹宽度较窄.如果同时控制QD层在刚刚出点,则QD主要沿着较窄的布纹结构排列,从而得到有序排列的QD.

Direct Numerical Simulation of Shock/Turbulent Boundary Layer Interaction in a Supersonic Compression Ramp

A direct numerical simulation of the shock/turbulent boundary layer interaction flow in a supersonic 24-degree compression ramp is conducted with the free stream Mach number 2.9. The blow-and-suction disturbance in the upstream wall boundary is used to trigger the transition. Both the mean wall pressure and the velocity profiles agree with those of the experimental data, which validates the simulation. The turbulent kinetic energy budget in the separation region is analyzed. Results show that the turbulent production term increases fast in the separation region, while the turbulent dissipation term reaches its peak in the near-wall region. The turbulent transport term contributes to the balance of the turbulent conduction and turbulent dissipation. Based on the analysis of instantaneous pressure in the downstream region of the mean shock and that in the separation bubble, the authors suggest that the low frequency oscillation of the shock is not caused by the upstream turbulent disturbance, but rather the instability of separation bubble.