Establishment of a micro-particle bombardment transformation system for Dunaliella saliva

In this study, we chronicle the establishment of a novel transformation system for the unicellular marine green alga, Dunaliella salina. We introduced the CaMV35S promoter-GUS construct into D. saliva with a PDS1000/He micro-particle bombardment system. Forty eight h after transformation, via histochemical staining, we observed the transient expression of GUS in D. salina cells which had been bombarded under rupture-disc pressures of 450 psi and 900 psi. We observed no GUS activity in either the negative or the blank controls. Our findings indicated that the micro-particle bombardment method constituted a feasible approach to the genetic transformation of D. salina. We also conducted tests of the cells' sensitivity to seven antibiotics and one herbicide, and our results suggested that 20 mu g/ ml of Basta could inhibit cell growth completely. The bar gene, which encodes for phosphinothricin acetyltransferase and confers herbicide tolerance, was introduced into the cells via the above established method. The results of PCR and PCR-Southern blot analyses indicated that the gene was successfully integrated into the genome of the transformants.

Genetic transformation in Kappaphycus alvarezii using micro-particle bombardment: a potential strategy for germplasm improvement

This study investigated the delivery of a SV40 promoter driving lacZ gene into cells of Kappaphycus alvarezii using particle bombardment. Thallus pieces 0.5-0.8 mm in diameter and 1 cm in length were prepared as gene recipients. Bombardment parameters of 450 psi (rupture pressures) x 6 cm (particle travel distances), 650 psi x 6 cm, 1,100 psi x 6 cm and 1,100 psi x 9 cm were used. A significant increase in transformation efficiency from about 33% under the rupture pressure of 450 psi to 87% at 650 psi was observed in transformed thalli. Most of the positive cells appeared in epidermal cells bombarded at 450 psi, whereas positive signals were seen in both epidermal and medullary cells at 650 psi. No positive transient expression was detected at a bombardment of 1,100 psi, or in negative or blank controls. For the conditions tested, the best parameter was obtained at 650 psi at a distance of 6 cm. Thus, the strategy of taking vegetative thalli as recipients, using particle bombardment, and combining this with micro-propagation, together with developing an in vivo selectable marker, is a viable way to produce stable transformants, to eliminate chimeric expression, and to achieve transgenic breeding in K. alvarezii.

MeV金离子辐照聚苯乙烯微球的各向异性形变

在低温条件下用Au离子辐照法实现了聚苯乙烯(PS)微球的各向异性形变.PS微球在离子辐照下呈现出不同于SiO2微球的形变特点.照后PS微球整体收缩,在平行于离子入射方向上收缩尤甚,使照后PS微球呈长轴垂直与离子入射方向的椭球.采用加掩膜辐照法,在同一晶体上特定区域实现微球的形变.此工作为重离子辐照在光子晶体中引入可控缺陷奠定了基础.

Influence of different post-treatments on the structure and optical properties of zinc oxide thin films

Zinc oxide (ZnO) films with c-oriented were grown on fused quartz glass substrates at room temperature using dc reactive magnetron sputtering. The as-grown films were annealed at 700 degrees C in air and bombarded by ion beam, respectively. The effects of post-treatments on the structural and optical properties of the ZnO films were investigated by X-ray diffraction (XRD), photoluminescence (PL), optical transmittance and absorption measurements. The XRD spectra indicate that the crystal quality of ZnO films has been improved by both the post-treatments. Compared with the as-grown sample, both annealed and bombarded samples exhibited blueshift in the UV emission peaks, and a strong green emission was found in the annealed ZnO film. In both optical transmittance and absorption spectra, a blueshift of the band-gap edge was observed in the bombarded film, while a redshift was observed in the annealed film. (c) 2004 Elsevier B.V. All rights reserved.

两种后处理方法对HfO2薄膜性能的影响

利用电子束蒸发和光电极值监控技术制备了氧化铪薄膜，并分别用两种后处理方法（空气中退火和氧等离子体轰击）对样品进行了处理．然后，对样品的透过率、吸收和抗激光损伤阈值进行了测试分析．实验结果表明，两种后处理方法都能不同程度地降低了氧化铪薄膜的吸收损耗、提高了抗激光损伤阈值．实验结果还表明，氧等离子体轰击的后处理效果明显优于热退火，样品的吸收平均值在氧等离子体后处理前后分别为34．8ppm和9．0ppm，而基频（1 064nm）激光损伤阈值分别为10．0J／cm^2和21．4J／cm^2．

谷子体细胞无性系变异和抗除草剂基因转化研究

谷子是我国北方具有区域重要性的禾谷类粮食作物。谷子的体细胞无性系变异和外源基因转化相对其它作物研究较少。本研究利用谷子生产的育种中应用的多个优良品种为材料，分析了谷子体细无性系变异发生的影响因素、变异性和频率、DNA分子水平变异和育种应用等问题;采用基因枪法和花粉管通道法，进行了谷子抗除草剂基因转化研究。 主要结果包括： 1. 通过几种外植体的愈伤组织诱导分析,找到了小花分化期前后的谷子幼穗是愈伤组织诱导的最好外植体.提出谷子愈伤组织可按生长状态和结构划分为质密型、松软型和松散型三种基本类型的观点。前两种为胚性愈伤组织并可相互转换，松软型愈伤组织生长状态稳定，可塑性好，是继代培养和因基化的首选类型。供试品种中豫谷1号、高39、郑407和矮宁黄为易培养品种，矮88、豫谷2号、系238、冀14号、C445和青丰谷为相对难培养品种。这些结果为谷子组织培养和生物技术操作提供了基础资料。 2. 首次对多个谷子品种较大群体的无性系变异进行了分析。结果表明，以R_2株系为单位的谷子体细胞无性系表现型变异频率平均为13.0%，不同基因型的变幅为4.3～32.9%;变异涉及株高、抽穗期、穗粒重、出谷率、叶鞘色、育性、抗病性、米色、穗型等多个性状，多数变异为株高和抽穗期等数量性状，少数为矮秆等质量性状：变异的性状多数能在R_3稳定并遗传给后代。从谷子体细胞无性系变异中选出了一批农艺性状得到改良的新品系，其中系103已进入省区域试验，并提供给多家育种单位作为亲本应用。 3. 将RAPD分析技术引入谷子体细胞无性系变异研究。豫谷2号无性系的RAPD多态性变化既有亲本带的缺失，也有新带的产生。用RAPD多态性变化的SMC值度量无性系同亲本相比DNA水平变异的大小，表现型发生变异的无性系,其SMC值分别为0.905～1.0;表现型未发生变异的无性系，RAPD多态性也可能发生变化，其SMC值分布为0.953～1.0。 4. 通过Gus基因瞬时表达单位数的比较，优化了JQ－700基因枪转化谷子松型愈伤组织的操作参数：质粒DNA用量3μg/mg钨粉，CaCl_2农度1.5M，亚精胺浓度40mM，样品室高度7cm，粗弹头为微弹载体，每皿愈伤组织用量1～2g，每次轰击钨粉用量50μg，轰击前4小时和轰击后16～20小时，用含蔗糖150g/l的高渗培养基处理。利用该技术体系，以bar基因为目的基因转化豫谷2号愈伤组织。经选择培养和植株再生，首次获得了抗0.1% bialaphos的正常可育植株，经PCR和Southern blot分析，bar基因已整合到转化体的基因组中，为创造抗除草剂的谷子新种质提供了材料和技术基础。 5. 研究了花粉管通道法转化和花粉介导的基因枪转化谷子的可行性。花粉管通道法转化后代中，获得了抗0.1% bialaphos的抗性植株，经X-gluc组织化学检测，抗性植株叶片的Gus反应为阳性。初步说明该植株可能为转化体，在谷子上为花粉管通道法转化的可行性提供了佐证。花粉介导的基因枪转化未获得转化体。 本文对体细胞无性系变异形成的原因和应用、无性系变异的分子生物学分析、以及谷子的外源基因转化方法等问题进行了讨论。

影响小麦遗传转化的因素及山菠菜BADH 基因导入研究

本研究在前人研究工作的基础上，以小麦转化系统的建立和完善为前提，将BADH基因导入小麦，获得外源BADH基因表达的小麦转基因植株。 （1）小麦不同基因型、不同外植体和不同器官对PPT或bialaphos选择的反应不同，两种试剂对小麦转化体的选择具有同样效果。轰击后的受体材料经过2-3天的恢复生长且植株分化时不用PPT选择可以提高转化效率。冀885-443和石90-4185两个品种对PPT敏感程度适中，具有较强的植株再生能力，得到的转基因植株数和转基因频率均较高。 （2）用pAHC25质粒转化冀885-443等小麦品种取得成功，获得转基因植株12株，平均转基因频率为0.4%。Southern杂交结果表明bar基因已经整合到小麦基因组中。根据研究结果认为，过快过高地提高PPT浓度是造成转基因频率低的主要原因。 （3）采用基因枪法成功地将山菠菜BADH基因（pABH9）导入到冀885-443等品种中。PCR检测和Southern杂交分析证实获得26株转基因植株，不同品种转化频率介于0.3-2.7%，外源BADH基因在转基因植株的叶片内表达。在胁迫条件下有15株转基因植株的BADH酶活力单位明显超过亲本;有6株的相对电导率显著比亲本低，说明这些植株在胁迫条件下细胞受到损伤比亲本低。 （4）采用花粉管通道法向小麦转化pAHC25，筛选出62株抗PPT，转化频率为3.97%。采用农杆菌介导转化冀885-443的成熟胚和幼胚愈伤组织，在转化愈伤组织中观察到gus基因的表达，也得到抗G418的愈伤组织，但没能得到再生植株。

高赖氨酸蛋白基因的克隆及其转基因水稻植株的获得

水稻、玉米、小麦和大麦等许多主要禾本科作物的第一限制性氨基酸是赖氨酸。本文将一个来源于四棱豆的高赖氨酸蛋白基因导入水稻，以研究通过转基因改善蛋白质的可能，获得有经济价值和社会意义的转基因作物。 构建了含有高赖氨酸蛋白基因（Lys）、gus基因及植物选择标记潮霉素磷酸转移酶基因（hpt）的植物表达载体pBRLys;在pBRLys中，该高赖氨酸蛋白基因由目前已知最强的单子叶植物启动子玉米Ubiquitin 1启动子调控。用基因枪轰击法将pBRLys导入水稻幼胚或幼胚诱导的愈伤组织。共得到36株潮霉素抗性再生植株，经分子检测有22株为转基因植株。 实验中对影响水稻转化、再生和移栽一些条件进行了研究。从潮霉素筛选浓度、愈伤组织干燥处理、光照对分化的影响、多效唑的影响和移栽环境等做了一些简化和改善。 PCR检测、PCR-Southern杂交和Southern杂交表明潮霉素基因和Lys基因已经整合到转基因水稻的基因组中，外源基因在转基因水稻基因组中以1个拷贝以上的形式存在。同时，GUS组织化学染色表明转基因水稻植株的叶、茎和根中都有gus基因的表达。 初步对5株转基因植株进行赖氨酸含量测定，结果表明：与非转化对照相比，有两棵植株赖氨酸含量提高，分别增加6.0%和12.4%。对更多抗性转化植株的分子检测、GUS分析和赖氨酸含量测定正在进行之中。

羊草细胞差异表达基因分析与遗传转化方法研究

羊草（Leymus chinensis (Trin.) Tzvel），隶属禾本科赖草属，是欧亚大陆草原区东部重要建群种之一。羊草是牧草之王，是我国比较有优势的战略性生物资源，对我国北方畜牧业的发展以及生态环境的保育均具有重要意义。近年来，由于缺乏科学管理、过度放牧等不利影响，加之羊草本身固有的“三低”问题（即抽穗率低、结实率低、发芽率低）已对羊草生物多样性维持构成了严重的威胁，限制了我国人工草地建设和天然草地的改良及沙化治理的步伐。因此，如何通过细胞、分子生物学以及生物技术手段改良羊草、快速评价和创造新的种质;如何加快育种进程便成为当前亟待解决的问题。本文围绕这些问题开展了系统的研究并取得如下结果： 1. 建立了羊草离体培养再生体系，并研究了影响愈伤组织诱导和植株再生的因素，影响植株再生的主要因素为激素配比和基因型。将3～5mm的幼穗接种到含有2,4-D 0～5.0mg/L的N6基本培养基上，随着2,4-D浓度的变化，愈伤组织诱导率不同，最高诱导率为93.21%（基因型C6）、最低为33.35%（吉生1号）;愈伤组织在N6(大)＋B5(微)＋KT1.0mg/L+BA1.0mg/L的培养基上可以分化出芽，并在1/2MS培养基上生根。羊草基因型W4不同幼穗诱导的愈伤组织在继代培养过程中其生长、褐化死亡等方面存在着差异;在分化培养过程中，不同幼穗的愈伤组织最高分化率为9.24%，最低分化率为5.26%。 2. 对来自同一基因型不同幼穗的愈伤组织中差异表达的基因进行了研究。采用DDRT-PCR技术对其差异表达的基因进行了分离，通过银染技术显示差异片段。将得到的差异片段进行回收、克隆测序，得到两个差异片段序列，经过序列分析表明，其中一个片段是与水稻翻译延伸因子eEF-1基因高度同源;另一差异片段与水稻谷胱甘肽转移酶GST基因高度同源。 3. 建立了羊草遗传转化方法。在获得羊草离体培养再生体系的基础上，采用基因枪法对羊草两个基因型进行转抗除草剂基因（PAT）的研究。对分别来自基因型W4和C3的愈伤组织各1430和1850块进行转化。在附加1.0mg/L PPT的培养基上进行一系列的筛选培养，共获得了23株再生苗，经过生根筛选培养，得到5株抗性苗，3株来自基因型W4，2株来自基因型C3。对5株植株进行PCR和Southern 检测，得到2株阳性苗，均来自基因型W4，对阳性植株经过无性繁殖得到的无性系进行PCR检测及Basta耐受性鉴定，外源基因可以在其无性系稳定遗传并表达，无性系除对Basta具有抗性外，其表型特征与对照无明显区别。

CYCLIC PEPTIDE HEPATOTOXINS FROM FRESH-WATER CYANOBACTERIAL (BLUE-GREEN-ALGAE) WATERBLOOMS COLLECTED IN CENTRAL CHINA

Toxic cyanobacteria (blue-green algae) waterblooms have been found in several Chinese water bodies since studies began there in 1984. Waterbloom samples for this study contained Anabaena circinalis, Microcystis aeruginosa and Oscillatoria sp. Only those waterblooms dominated by Microcystis aeruginosa were toxic by the intraperitoneal (i.p.) mouse bioassay. Signs of poisoning were the same as with known hepatotoxic cyclic peptide microcystins. One toxic fraction was isolated from each Microcystis aeruginosa sample. Two hepatotoxic peptides were purified from each of the fractions by high-performance liquid chromatography and identified by amino acid analysis followed by low and high resolution fast-atom bombardment mass spectrometry (FAB-MS). LD50 i.p. mouse values for the two toxins were 245-mu-g/kg (Toxin A) and 53-mu-g/g (Toxin B). Toxin content in the cells was 0.03 to 3.95 mg/g (Toxin A) and 0.18 to 3.33 mg/kg (Toxin B). The amino acid composition of Toxin A was alanine [1], arginine [2], glutamic acid [1] and beta-methylaspartic acid [1]; for Toxin B it was the same, except one of the arginines was replaced with a leucine. Low- and high-resolution FAB-MS showed that the molecular weights were 1,037 m/z (Toxin A) and 994 m/z (Toxin B), with formulas of C49H76O12N13 (Toxin A) and C49H75O12N10 (Toxin B). It was concluded that Toxin A is microcystin-RR and Toxin B is microcystin-LR, both known cyclic heptapeptide hepatotoxins isolated from cyanobacteria in other parts of the world. Sodium borohydride reduction of microcystin-RR yielded dihydro-microcystin-RR (m/z = 1,039), an important intermediate in the preparation of tritium-labeled toxin for metabolism and fate studies.

Growth-Parameter Spaces and Optical Properties of Cubic Boron Nitride Films on Si(001)

Cubic boron nitride (c-BN) films were deposited on Si(001) substrates in an ion beam assisted deposition (IBAD) system under various conditions, and the growth parameter spaces and optical properties of c-BN films have been investigated systematically. The results indicate that suitable ion bombardment is necessary for the growth of c-BN films, and a well defined parameter space can be established by using the P/a-parameter. The refractive index of BN films keeps a constant of 1.8 for the c-BN content lower than 50%, while for c-BN films with higher cubic phase the refractive index increases with the c-BN content from 1.8 at chi(c) = 50% to 2.1 at chi(c) = 90%. Furthermore, the relationship between n and rho for BN films can be described by the Anderson-Schreiber equation, and the overlap field parameter gamma is determined to be 2.05.

Effects of crystalline quality on the phase stability of cubic boron nitride thin films under medium-energy ion irradiation

To investigate the effect of radiation damage on the stability and the compressive stress of cubic boron nitride (c-BN) thin films, c-BN films with various crystalline qualities prepared by dual beam ion assisted deposition were irradiated at room temperature with 300 keV Ar+ ions over a large fluence range up to 2 x 10(16) cm(-2). Fourier transform infrared spectroscopy (FTIR) data were taken before and after each irradiation step. The results show that the c-BN films with high crystallinity are significantly more resistant against medium-energy bombardment than those of lower crystalline quality. However, even for pure c-BN films without any sp(2)-bonded BN, there is a mechanism present, which causes the transformation from pure c-BN to h-BN or to an amorphous BN phase. Additional high resolution transmission electron microscopy (HRTEM) results support the conclusion from the FTIR data. For c-BN films with thickness smaller than the projected range of the bombarding Ar ions, complete stress relaxation was found for ion fluences approaching 4 x 10(15) cm(-2). This relaxation is accompanied, however, by a significant increase of the width of c-BN FTIR TO-line. This observation points to a build-up of disorder and/or a decreasing average grain size due to the bombardment. (c) 2005 Elsevier B.V. All rights reserved.

The microstructure of hydrogenated microcrystalline silicon thin films studied by small-angle x-ray scattering

The microstructures of hydrogenated microcrystalline silicon (tic-Si: H) thin films, prepared by plasma-enhanced chemical vapor deposition (PECVD), hot wire CVD(HWCVD) and plasma assisted HWCVD (PE-HWCVD), have been analyzed by the small angle x-ray scattering(SAXS) measurement. The SAXS data show that the microstructures of the μ c-Si: H films display different characteristics for different deposition techniques. For films deposited by PECVD, the volume fraction of micro-voids and mean size are smaller than those in HWCVD sample. Aided by suitable ion-bombardment, PE-HWCVD samples show a more compact structure than the HWCVD sample. The microstructure parameters of the μ c-Si: H thin films deposited by two-steps HWCVD and PE-HWCVD with Ar ions are evidently improved. The result of 45° tilting SAXS measurement indicates that the distribution of micro-voids in the film is anisotropic. The Fouriertransform infrared spectra confirm the SAXS data.

Evidence of ultrafast energy exchange-induced soft'mode of phonons and lattice instability: a nanotime effect

With a series of supportive experimental phenomena as induced by ion beam bombardment, energetic beaminduced athermal activation process in Si is demonstrated. This is correlated with phenomena induced by ultrafast energy exchange in condensed matter in general. A critical modelling is presented on the above process and a universal concept: the ultrafast energy exchange-induced soft mode of phonons and the lattice instability in condensed matter are proposed.

Nanodiamond formation by hot-filament chemical vapor deposition on carbon ions bombarded Si

Nanocrystalline diamond films were grown by a two-step process on Si(1 0 0) substrate, which was first pretreated by pure carbon ions bombardment. The bombarded Si substrate was then transformed into a hot-filament chemical vapor deposition (HFCVD) system for further growth. Using the usual CH4/H-3 feed gas ratio for micro crystalline diamond growth, nanodiamond crystallites were obtained. The diamond nucleation density is comparable to that obtained by biasing the substrate. The uniformly distributed lattice damage is proposed to be responsible for the formation of the nanodiamond. (C) 2002 Elsevier Science B.V. All rights reserved.