Anti Human Immunodeficiency Virus Type 1 (HIV-1) Agents 4. Discovery of 5,5 '-(p-Phenylenebisazo)-8-hydroxyquinoline Sulfonates as New HIV-1 Inhibitors in Vitro

To search for compounds with superior anti-human immunodeficiency virus type 1 (HIV-1) activity, ten 5,5'-(p-phenylenebisazo)-8-hydroxyquinoline sulfonates (4a-j) were synthesized and preliminarily evaluated as HIV-1 inhibitors in vitro for the first time. Some compounds demonstrated anti-HIV-1 activity, especially 5,5'-(p-phenylenebisazo)-8-hydroxyquinoline p-ethylbenzenesulfonate (4g) and 5,5'-(p-phenylenebisazo)-8-hydroxyquinoline p-chlorobenzenesulfonate (41) showed the more potent anti-HIV-1 activity with 50% effective concentration (EC50) values of 2.59 and 4.01 mu g/ml, and therapeutic index (TI) values of 31.77 and 24.51, respectively.

Calculation of light delay for coupled microrings by FDTD technique and Pade approximation

The Pade approximation with Baker's algorithm is compared with the least-squares Prony method and the generalized pencil-of-functions (GPOF) method for calculating mode frequencies and mode Q factors for coupled optical microdisks by FDTD technique. Comparisons of intensity spectra and the corresponding mode frequencies and Q factors show that the Pade approximation can yield more stable results than the Prony and the GPOF methods, especially the intensity spectrum. The results of the Prony method and the GPOF method are greatly influenced by the selected number of resonant modes, which need to be optimized during the data processing, in addition to the length of the time response signal. Furthermore, the Pade approximation is applied to calculate light delay for embedded microring resonators from complex transmission spectra obtained by the Pade approximation from a FDTD output. The Prony and the GPOF methods cannot be applied to calculate the transmission spectra, because the transmission signal obtained by the FDTD simulation cannot be expressed as a sum of damped complex exponentials. (C) 2009 Optical Society of America

Characterization of complex hydrocarbons in cigarette smoke condensate by gas chromatography-mass spectrometry and comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry

Gas chromatography-mass spectrometry with electron ionization and positive-ion chemical ionization and comprehensive two-dimensional gas chromatography-time-of-flight mass spectrometry (GC x GC-TOF-MS) were applied for the characterization of the chemical composition of complex hydrocarbons in the non-polar neutral fraction of cigarette smoke condensates. Automated data processing by TOF-MS software combined with structured chromatograms and manual review of library hits were used to assign the components from GC x GC-TOF-MS analysis. The distributions of aliphatic hydrocarbons and aromatics were also investigated. Over 100 isoprenoid hydrocarbons were detected, including carotene degradation products, phytadiene isomers and carbocyclic diterpenoids. A total of 1800 hydrocarbons were tentatively identified, including aliphatic hydrocarbons, aromatics, and isoprenoid hydrocarbons. The identified hydrocarbons by GC x GC-TOF-MS were far more than those by GC-MS. (C) 2004 Elsevier B.V. All rights reserved.

GIS接受外部空间数据的初步探讨——兼论ARC/INFO~的数据接受方式

数据是地理信息系统 (GIS)应用的核心。现实世界的数据具有普遍的多样性 ,关于 GIS接受不同数据的研究已成为当前 GIS研究中的一个难点和热点。从常见空间数据类型的格式、GIS接受外部空间数据的方式以及 GIS接受外部空间数据中的数据精度、比例尺、坐标变换等几个方面 ,对外部空间数据处理系统的数据向 GIS转换的问题进行了探讨 ,同时以通用 GIS工具软件 ARC/INFO为例分析了其接受外部矢量空间数据的方式。

基于CorelDRAW软件的小流域模型雨滴测量试验研究

降雨雨谱的观测,是了解降雨特性的一项重要工作。修建小流域模型,是对小流域进行各种试验研究的有效手段。该文基于相似率要求,在模型降雨雨滴较小,雨谱参数难以测定问题的基础上,运用CorelDRAW软件与传统色斑法相结合,探索出一种新的测量与数据处理方法,并得出不同情况下模型的雨谱特性。该法提高了测量精度,并减少了工作量。

extending the boundary of spreadsheet programming: lessons learned from chinese governmental projects

ICSE

ON THE SIGNIFICANCE OF WAVELENGTH POSITIONING ACCURACY IN MULTICOMPONENT ANALYSIS TECHNIQUES FOR THE CORRECTION OF LINE INTERFERENCES IN INDUCTIVELY COUPLED PLASMA ATOMIC EMISSION-SPECTROMETRY

The present paper reports some definite evidence for the significance of wavelength positioning accuracy in multicomponent analysis techniques for the correction of line interferences in inductively coupled plasma atomic emission spectrometry (ICP-AES). Using scanning spectrometers commercially available today, a large relative error, DELTA(A) may occur in the estimated analyte concentration, owing to wavelength positioning errors, unless a procedure for data processing can eliminate the problem of optical instability. The emphasis is on the effect of the positioning error (deltalambda) in a model scan, which is evaluated theoretically and determined experimentally. A quantitative relation between DELTA(A) and deltalambda, the peak distance, and the effective widths of the analysis and interfering lines is established under the assumption of Gaussian line profiles. The agreement between calculated and experimental DELTA(A) is also illustrated. The DELTA(A) originating from deltalambda is independent of the net analyte/interferent signal ratio; this contrasts with the situation for the positioning error (dlambda) in a sample scan, where DELTA(A) decreases with an increase in the ratio. Compared with dlambda, the effect of deltalambda is generally less significant.

The characteristics of BSRs and their derived heat flow on the profile 973 in the northeastern South China Sea

Processing of a recently acquired seismic line in the northeastern South China Sea by Project 973 has been conducted to study the character and the distribution of gas hydrate Bottom-Simulating Reflectors (BSRs) in the Hengchun ridge. Analysis of different-type seismic profiles shows that the distribution of BSRs can be revealed to some extents by single-channel profile in this area, but seismic data processing plays an important role to resolve the full distribution of BSRs in this area. BSR' s in the northeastern South China Sea have the typical characteristics of BSRs on worldwide continental margins: they cross sediment bed reflections, they are generally parallel to the seafloor and the associated reflections have strong amplitude and a negative polarity. The characteristics of BSRs in this area are obvious and the BSRs indicate the occurrence of gas hydrate-bearing sediments in the northeastern South China Sea. The depth of the base of the gas-hydrate stability zone was calculated using the phase stability boundary curve of methane hydrate and gas hydrate with mixture gas composition and compared with the observed BSR depth. If a single gradient geothermal curve is used for the calculation, the base of the stability zone for methane hydrate or gas hydrate with a gas mixture composition does not correspond to the depth of the BSRs observed along the whole seismic profile. The geothermal gradient therefore changes significantly along the profile. The geothermal gradient and heat flow were estimated from the BSR data and the calculations show that the geothermal gradient and heat flow decrease from west to east, with the increase of the distance from the trench and the decrease of the distance to the island arc. The calculated 2 heat flow changes from 28 to 64 mW/m(2), which is basically consistent with the measured heat flow in southwestern offshore Taiwan.

海洋重力资料预处理软件的编制及应用

首先应用Visual Basic 6.0计算机语言，根据我们所熟知的海洋重力数据的处理步骤和海洋重力测量规范内容，开发出一套海洋重力资料整理软件，以便能使资料整理工作成为一体化，提高工作效率，保证数据处理的准确性。应用该软件对南海某工区的实际重力资料进行了处理，得到了满意的处理结果，证明该软件使用方便，计算准确可靠，能够快速准确的处理采集到的重力数据。对数据处理结果进行了分析和应用。 通过分析Eötvös校正值与重力仪读数之间的变化关系，可以对重力仪的动态性能进行分析和评价。得到2级海况条件下重力仪的实际阻尼延迟时间约为60s，比厂方推荐的理论值（110s）更接近实际，有助于减小数据处理过程中的定位误差，提高测量精确度。通过对重力仪的灵敏性进行分析，验证重力仪在测量过程中的准确性和可靠性，为获得精确的数据提供可靠的保障。 对该套规则重力测网数据，分别采用60s阻尼延迟时间和110s阻尼延迟时间进行阻尼延迟校正，然后进行交点差计算和平差处理，得到的结果显示：采用60s阻尼延迟时间对数据进行阻尼延迟校正后得到的测量精度为1.40mGal，经过平差后的测量精度为0.77mGal；而采用110s阻尼延迟时间对数据进行阻尼延迟校正后得到的测量精度为1.62mGal，经过平差后的测量精度为0.96mGal。此结果验证了利用船只机动转向法确定海洋重力仪的实际阻尼延迟时间的必要性和应用价值。 最后，对宋文尧等人的平差方法和刘保华等人的最小二乘平差方法进行了分析比较，从推导原理和计算结果两方面证明了两种方法在规则海洋重力测网平差作用上是等效的。对于不规则重力测网平差，最小二乘平差方法具有强大的优势，且计算机程序运算实现方便。

电机转速自适应测量方法及其在DSP上的实现

本文在分析几种常用的基于编码器测速方法的基础上,提出了一种高性能的自适应速度测量方法。该方法选择一个可变的时间周期和编码器脉冲数来测量单位时间内的编码器脉冲数,再通过简单的计算得到转速的测量值。数字信号处理器(DSP)芯片集成有正交脉冲编码电路,并且数据处理速度快,实时性强。本文中提出的方法在电机控制专用DSP芯片TMS320 LF2407A上进行了实现。实验研究表明,可以在提高低速时的测速准确度的同时,提高系统的响应时间。该方法已经在自主研发的全数字伺服驱动系统中得到了成功应用。

三维环境中基于ESMF的多机器人协作观测方法

提出了一种基于扩展集员估计（ESMF）的多机器人协作观测方法，该方法将多机器人之间的观测数据融合过程嵌入到估计过程当中，从而减少了数据处理的过程，增强了算法的快速性。同时，这种方法在实现协作观测时只需要协作机器人传送观测信息而不是整个的估计信息，因此可以减轻多机器人系统的通信负担。除此之外，该方法在融合多机器人的观测数据过程中避免了多余的近似过程，增加了观测的准确性。最后，给出了三维环境下的仿真结果，验证了方法的可行性。

基于OMAP的废墟搜救机器人监控终端

针对废墟搜救机器人的实际需要和当前监控终端的不足,设计开发了一种新的监控终端。这种监控终端基于OMAP架构,包含了人机界面、遥控、无线通讯、数据处理等功能,实现了对机器人本体的无线操控,并实现了与指挥中心的远程无线连接。由于在功耗与性能之间取得了平衡,这种监控终端减小了体积,提高了便携性。

移动机器人分布式超声探测系统设计

设计制作了一种基于多处理器的移动机器人分布式超声环境探测系统.该系统由上位工作模式控制模块和下位智能超声传感器阵列组成.下位智能超声传感器选用收发一体式超声传感器,每个传感器均由独立的微处理器控制,完成实时数据处理、抗干扰处理、故障报警以及并行数据通信等功能.上位工作模式控制模块可以根据不同的控制策略,使下位传感器阵列采用“阈值比较法”和“改进型递推均值滤波”算法及EERUF方法并行循环工作模式,实现不同方向传感器分组并行工作,提高了探测的实时性和准确性,以及对移动机器人控制的鲁棒性.仿真和实验的结果都验证了该系统的可靠性和有效性.

基于多微处理器的智能超声探测系统

设计了一种基于多微处理器的智能超声探测系统。该系统采用由上位工作模式控制单元和下位智能超声传感器阵列组成的分布式结构。每个超声传感器均由独立的微处理器控制,并完成实时数据处理、抗干扰处理、故障报警以及数据通信等功能。上位控制单元根据移动机器人的运动状态采用不同的控制策略,使下位传感器阵列分组并行工作,提高了探测系统的实时性;下位传感器采用"阈值比较法"、"改进型递推均值滤波"算法和模糊信息处理技术,提高了探测系统的准确性、可靠性。将该探测系统安装于RIRA-II移动机器人上,进行了基于主动视觉和超声信息的运动目标跟踪实验,实验表明超声探测系统运行可靠、稳定。

数字图像处理中多窗口下的自适应中值滤波

根据心理物理学、神经生理学、认知神经学等学科在视觉认知领域的部分研究成果，结合机器视觉、图像处理领域在图像增强方面已经提出的一些方法，提出了结合先验知识的多窗口结构下的分块中值滤波方法，在每一个窗口内单独进行处理与分析，突出了视觉处理目的，减少了运算量， 节省数据存储空间，达到了令人满意的滤波效果，能够在原始图像比较复杂的情况下，较好地对其进行预处理，可以改善、提高后期图像处理过程，如图像分割、图像分析的正确性和有效性。