Symmetry analysis and numerical simulation of mode characteristics for equilateral-polygonal optical microresonators

Mode characteristics for two-dimensional equilateral-polygonal microresonators are investigated based on symmetry analysis and finite-difference time-domain numerical simulation. The symmetries of the resonators can be described by the point group C-Nv, accordingly, the confined modes in these resonators can be classified into irreducible representations of the point group C-Nv. Compared with circular resonators, the modes in equilateral-polygonal resonators have different characteristics due to the break of symmetries, such as the split of double-degenerate modes, high field intensity in the center region, and anomalous traveling-wave modes, which should be considered in the designs of the polygonal resonator microlasers or optical add-drop filters.

Finite-difference time-domain analysis of deformed square cavity filters with a traveling-wave-like filtering response by mode coupling

An add-drop filter based on a perfect square resonator can realize a maximum of only 25% power dropping because the confined modes are standing-wave modes. By means of mode coupling between two modes with inverse symmetry properties, a traveling-wave-like filtering response is obtained in a two-dimensional single square cavity filter with cut or circular corners by finite-difference time-domain simulation. The optimized deformation parameters for an add-drop filter can be accurately predicted as the overlapping point of the two coupling modes in an isolated deformed square cavity. More than 80% power dropping can be obtained in a deformed square cavity filter with a side length of 3.01 mu m. The free spectral region is decided by the mode spacing between modes, with the sum of the mode indices differing by 1. (c) 2007 Optical Society of America.

A new method to realize configurable OADM by using Bragg waveguide grating

Our configurable optical add/drop multiplexers (OADM) are based on thermally tunable silicon-on-insulator (SOI) Bragg gratings. We have simulated the whole device and get ideal performance. We also tried experiments to explore the process of grating waveguide and got useful results.

improving document icon to re-find efficiently what you need

It is common that documents are represented by document icon in graphical user interfaces. The document icon facilitates user to retrieve documents, but it is difficult to distinguish the document from a collection of documents that user have accessed to. Our paper presents a document icon on which the users can add some subjective values and mark. Then we describe a system ex-explorer that users can browser and search the extent document icon. We found that it is easy to re-find the document on which users added some annotation or mark by themselves.

MBE生长的高质量AlGaAs/InGaAs双δ掺杂PHEMT结构的材料

用MBE方法制备的PHEMT微结构材料，其2DEG浓度随材料结构的不同在2.0-4.0×10~(12)cm~(-2)之间，室温霍耳迁移率在5000-6500cm~2·V~(-1)·s~(-1)之间。制备的PHEMT器件，栅长为0.7μm的器件的直流特性：I_(dss)～280mA/mm,I_(max)～520-580mA/mm,g_m～320-400mS/mm,BV_(DS)>15V(I_(DS)=1mA/mm),BV_(GS)>10V,微波特性：P_0～600-900mW/mm,G～6-10dB,η_(add)～40-60%;栅长为0.4μm的器件的直流特性:I_(max)～800mA/mm,g_m>400mS/mm。

BPEL流程监视的可视化实现

When a BPEL process is executed,it is necessary to dynamically monitor the process.BPEL is a executable language,which is not suitable for visual monitoring.On the other hand,BPMN is designed to visually describe business process and is more intuitive for monitoring.To visually monitor a BPEL process, transformation from BPEL to BPMN is necessary.However,current study of transformation from BPEL to BPMN does not support the transformation of"link"activity.Besides,no work has been done to add supplementary information into BPMN during transformation.In this paper,we transform nested BPEL process into a flat BPMN process graph without hierarchy through applying a flattening strategy.Especially, we analyze various scenarios of the transformation of link activity,and provide a method to deal with it. Besides,we analyze the mapping between BPEL activities and BPMN graph,through which we found out that some supplementary information cannot automatically obtained from BPEL process.These supplementary information need to be added during transformation.At the end of this paper,we present the structure of our monitoring tool which is based on our transformation algorithm.

影响沼气甲基产孢弧菌生长及其甲烷单加氧酶活性的若干因素研究

本文叙述了影响甲烷氧化细菌沼气甲基产孢弧菌81Z菌株生长和甲烷单加氧酶(MMO)活性的若干因素。沼气甲基产孢弧菌81Z菌株细胞生长被高浓度PO43-(>8mM),NH4+([NH4cl]>500mg/l)抑制；[CuSO4·5H2O]在0～4mg/l范围内。生长随[Cu2+]升高而加强，低[Cu2+](0.1mg/l CuSO4·5H2O)培养基中，添加Cocl2·6H2O(0.238mg/l)；促进菌体细胞生长。发酵罐分批培养过程中，生长延迟期过后，沼气甲基产孢弧菌81Z菌株细胞MMO比活很快达到最高，并稳定至对数生长中后期，随即急剧下降至初始水平。发现沼气甲基产孢弧菌81Z细胞中存在一种MMO活性，它不同于已报道过的两种MMO,MMOL最适PH6.2～6.4，4℃相对稳定，其产生不受培养基中[Cu2+]调控能与甲醇-甲醇脱氢酶系统相偶联，在无细胞抽提液中其活性被400μM[Cu2+]抑制。在低[Cu2+]发酵罐培养条件下，沼气甲基产孢弧菌81Z菌株产生可溶性MMC，其最适PH7.0，4℃不稳定，可被DE-52分离为三组分：A、B、C。为了获得沼气甲基产孢弧菌81Z细胞MMO的最佳催化活性，①采用高[Cu2+]培养基进行发酵罐培养，收集对数生长中期的细胞；②选择反应缓冲液PH6.3；③反应体系中添加5mM甲醇或甲酸是有效的方法。在本研究所采取过的最佳条件下，测得MMO活性为15.9nmol/min·mg干细胞，是以前报道的该菌株活性0.97nmol/min·mg干细胞的十六倍。Some factors which influence growth and MMO activity of Methylosporovibrio methanica 81Z were described. The growth of Methylosporovibrio methanica 81Z is inhibited by high concentration of PO43-(8mM)or NH4+(500mg/lNH4cl). The growth of Methylosporovibrio methanica 81Z increased with rising of copper concentration up to 4mg/l CuSO4·5H2O. At low copper concentration(0.1mg/lCuSO4·5H2O),adding Cocl2·6H2O(0.238mg/l)could enhance the growth of Methylosporovibrio methanica 81Z.With batch culture of Methylosporovibrio methanica 81Z in a fermentor, after lag phase, the activity of MMO reached the highest level rapidly and steady until later log phase, then falled to initial level.MMOL activity differenct from that of two types of MMO reported before was found from Methylosporovibrio methanica 81Z with optimum PH value from 6.2 to 6.4 and relative stabilty at 4℃. Synthsis of the MMOL was not regulated by copper concentaration in medium. Its activity could couple with methane-l-methanoldehydrogenase system, and in cell-free extract, were inhibited by 400μm copper ion. At low copper concentration(0.1mg/lCuSO4·5H2O) and in a fermentor, Methylosporovibrio methanica 81Z could syntheis soluble MMO similar to solble MMO reported before by Palton and Patel. Its optimum PH value was 7.0. It was unstable at 4℃. It could be resoluted into three components: A, B, and C. It was effentive for obtaining the maxtmum MMO with Methylosporovibrio methanica 81Z that (1) to keep high copper concentration(4mg/lCuSO4·5H2O) in a fermentor and harvest cell at middlel lag phase;(2) to choose 6.3 as the PH value of reaction buffer;(3)and to add 5mM methanol or formate into reaction system. In this dy, the MMO activity of cells of Methylosporovibrio methanica 81Z was reached 15.9 nmol/min.mg, dry weight, sixteen times as high as the value(0.97nmol/min.mg, dry weight) reported with the same strain.

Characteristics of a 4-fold segmented clover detectore

Four high-purity germanium 4-fold segmented Clover detectors have been applied in the experiment of neutron-rich nucleus N-21. The performance of those, four Clovers have been tested with radioactive sources and in-beam experiments and the main results including energy resolution, peak-to-total ratios, the variation of the hit pattern distribution in difficult crystals of one Clover detector with the energy of gamma ray, and absolute full energy peak detection efficiency curve, were presented.

Determination of sulfur-containing compounds in diesel oils by comprehensive two-dimensional gas chromatography with a sulfur chemiluminescence detector

This article reports an analytical method for separating, identifying and quantitating sulfur-containing compounds and their groups in diesel oils (170-400degreesC) using comprehensive two-dimensional gas chromatography coupled with a sulfur chemiluminescence detector. The identification of target compounds and their groups was based on standard substances, the group separation feature and the-effect of comprehensive two-dimensional gas chromatography. The quantitative analysis on major sulfur compounds and total sulfur was carried out based on the linear response of sulfur chemiluminescence detector and the internal standards method. The results of total sulfur determination in the samples were compared with those from ASTM D 4294 standard method, the R.S.D. percentage were <6.02%, correctness of this method can meet the industrial requirement. To the end, the method developed was used to investigate the sulfur-containing compounds in different diesel oils, the result shows that the distribution of sulfur-containing compounds in diesel oils from different process units are apparently different. The sulfur compounds in fluid catalytic cracking (FCC), residuum fluid catalytic cracking (RFCC) diesel oils mainly exist in the form of alkyl-substituted dibenzothiophenes that add up to about 40-50% of the total sulfur, while this number is only 6-8 and 20-28% in visbreaking (VB) and delayed-coking (DC) diesel oils, respectively. (C) 2003 Elsevier B.V. All rights reserved.

不同林龄植被培肥改良土壤效益研究

在黄土丘陵沟壑区森林植被能够明显改善生态环境 ,防止土地退化 ,提高土壤中有机质、速效氮和速效钾的含量 ,降低土壤pH和容重 ;快速显著地增加土体中 >0 .2 5mm水稳性团聚体和 >5 0 μm微团粒的数量 ,使土壤结构改善 ,协调供应养分和水分的能力提高 ;能促进黏粒形成 ,坚实度增加 ,土壤的抗蚀性和抗冲性提高 ,有效地减少水土流失。植被对土壤的培肥改良是一种正向持续反馈机制 ,时间越长 ,效益越显著

有机钾肥在日光温室蔬菜上的应用效果研究

对陕北黄土高原日光温室大棚蔬菜黄瓜、大青菜、油麦菜和西芹进行了叶面喷施富万钾有机钾肥的田间试验研究。结果表明,在日光温室大棚蔬菜上施用有机钾肥,黄瓜植株高度、叶片数、茎粗、叶面积、瓜长均增加。大青菜的茎粗增长44%。油麦菜的株高、茎粗、地上植株、地下根重、总生物量均明显增加。西芹的株高、茎粗、地上植株、地下根重以及总生物量增加。富万钾有机钾肥能明显促进蔬菜生长,提高产量。

High activity PtRu/C catalysts synthesized by a modified impregnation method for methanol electro-oxidation

A modified impregnation method was used to prepare highly dispersive carbon-supported PtRu catalyst (PtRu/C). Two modifications to the conventional impregnation method were performed: one was to precipitate the precursors ((NH4)(2)PtCl6 and Ru(OH)(3)) on the carbon support before metal reduction: the other was to add a buffer into the synthetic solution to stabilize the pH. The prepared catalyst showed a much higher activity for methanol electro-oxidation than a catalyst prepared by the conventional impregnation method. even higher than that of current commercially available, state-of-the-art catalysts. The morphology of the prepared catalyst was characterized using TEM and XRD measurements to determine particle sizes, alloying degree, and lattice parameters. Electrochemical methods were also used to ascertain the electrochemical active surface area and the specific activity of the catalyst.

3-Mercaptopropionic Acid Capped Gold Nanoclusters: Quantized Capacitance in Aqueous Media

3-Mercaptopropionic add monolayer protected gold nanoclusters (MPA-MPCs) were synthesized and characterized by transmission electron microscopy, UV-Vis spectroscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The exact value of quantized double-layer capacitance of MPCS in aqueous media was obtained by differential pulse voltammograms.

Study on surface acid-base property of carboxylic acid-terminated self-assembled monolayers by cyclic voltammetry and electrochemical impedance spectroscopy

Cyclic voltammetry and electrochemical impedance spectroscopy were used to study the surface acid-base property of carboxylic acid-terminated self-assembled monolayers (SAMs). A carboxylic acid-terminated thiol, such as thioctic acid (1,2-dithiolane-3-pentanoic add), was self-assembled on gold electrodes. Electron transfer between the bulk solution and the SAM modified electrode was studied at different pH using Fe(CN)(6)(3-) as a probe. The surface pK(a) of thioctic acid was determined by cyclic voltammetry and electrochemical impedance spectroscopy to be 5.6 +/- 0.1 and 5.8 +/- 0.1, respectively. The method is compared with other methods of monolayer pK(a) measurement.

潮波模型的优化开边界方法研究

数值模式是潮波研究的一种有利手段，但在研究中会面临各种具体问题，包括开边界条件的确定、底摩擦系数和耗散系数的选取等。数据同化是解决这些问题的一种途径，即利用有限数量的潮汐观测资料对潮波进行最优估计，其根本目的是迫使模型预报值逼近观测值，使模式不要偏离实际情况太远。本文采用了一种优化开边界方法，沿着数值模型的开边界优化潮汐水位信息，目的是设法使数值解在动力约束的意义下接近观测值，获得研究区域的潮汐结果。边界值由指定优化问题的解来定，以提高模拟区域的潮汐精度，最优问题的解是基于通过开边界的能量通量的变化，处理开边界处的观测值与计算值之差的最小化。这里提供了辐射型边界条件，由Reid 和Bodine（本文简称为RB）推导，我们将采用的优化后的RB方法（称为ORB）是优化开边界的特殊情况。 本文对理想矩形海域（ E- E， N- N， 分辨率 ）进行了潮波模拟，有东部开边界，模式采用ECOM3D模式。对数据结果的误差分析采用，振幅平均偏差，平均绝对偏差，平均相对误差和均方根偏差四个值来衡量模拟结果的好坏程度。 需要优化入开边界的解析潮汐值本文采用的解析解由方国洪《海湾的潮汐与潮流》（1966年）方法提供，为验证本文所做的解析解和方文的一致，本文做了其第一个例子的关键值a,b,z,结果与其结果吻合的相当好。但略有差别，分析的可能原因是两法在具体迭代方案和计算机保留小数上有区别造成微小误差。另外，我们取m=20，得到更精确的数值，我们发现对前十项的各项参数值，取m=10,m=20各项参数略有改进。当然我们可以获得m更大的各项参数值。 同时为了检验解析解的正确性讨论m和l变化对边界值的影响，结果指出，增大m，m=20时，u的模最大在本身u1或u2的模的6%；m=100时，u的模最大在本身u1或u2的模的4%；m再增大，m=1000时，u的模最大在本身u1或u2的模的4%，改变不大。当l<1时， =0处u的模最大为2。当l=1时， =0处u的模最大为0.1，当l>1时，l越大，u的模越小，当l=10时，u的模最大为0.001，可以认为为0。 为检验该优化方法的应用情况，我们对理想矩形区域进行模拟，首先将本文所采用的优化开边界方法应用于30m的情况，在开边界优化入开边界得出模式解，所得模拟结果与解析解吻合得相当好，该模式解和解析解在整个区域上，振幅平均绝对偏差为9.9cm,相位平均绝对偏差只有4.0 ，均方根偏差只有13.3cm，说明该优化方法在潮波模型中有效。 为验证该优化方法在各种条件下的模拟结果情况，在下面我们做了三类敏感性试验： 第一类试验：为证明在开边界上使用优化方法相比于没有采用优化方法的模拟解更接近于解析解，我们来比较ORB条件与RB条件的优劣，我们模拟用了两个不同的摩擦系数，k分别为：0,0.00006。 结果显示，针对不同摩擦系数，显示在开边界上使用ORB条件的解比使用RB条件的解无论是振幅还是相位都有显著改善，两个试验均方根偏差优化程度分别为84.3%，83.7%。说明在开边界上使用优化方法相比于没有采用优化方法的模拟解更接近于解析解，大大提高了模拟水平。上述的两个试验得出， k=0.00006优化结果比k=0的好。 第二类试验，使用ORB条件确定优化开边界情况下，在东西边界加入出入流的情况，流考虑线性和非线性情况，结果显示，加入流的情况，潮汐模拟的效果降低不少，流为1Sv的情况要比5Sv的情况均方根偏差相差20cm,而不加流的情况只有0.2cm。线性流和非线性流情况两者模式解相差不大，振幅，相位各项指数都相近, 说明流的线性与否对结果影响不大。 第三类试验，不仅在开边界使用ORB条件，在模式内部也使用ORB条件，比较了内部优化和不优化情况与解析解的偏差。结果显示，选用不同的k,振幅都能得到很好的模拟，而相位相对较差。另外，在内部优化的情况下，考虑不同的k的模式解， 我们选用了与解析解相近的6个模式解的k,结果显示，不同的k,振幅都能得到很好的模拟，而相位较差。 总之，在开边界使用ORB条件比使用RB条件好，振幅相位都有大幅度改进，在加入出入流情况下，流的大小对模拟结果有影响，但线形流和非线性流差别不大。内部优化的结果显示，模式采用不同的k都能很好模拟解析解的振幅。