气相传输平衡法在（11-20）面蓝宝石上制备γ铝酸锂膜

为了寻找可能替代蓝宝石作为氮化镓外延的新型衬底，通过48h的气相传输平衡，分别在1000℃、1030℃、1050℃、1070℃和1100℃制备了一层单相多晶的γ铝酸锂膜。X射线衍射和扫描电镜分别用于表征膜的物相、取向和表面形貌。结果显示，γ铝酸锂择优取向的好坏取决于气相平衡传输温度，在1050℃制备的γ铝酸锂具有高度的[100]择优取向；在γ铝酸锂（001）面上的双轴拉应力可能有助于[100]择优取向的形成；γ铝酸锂晶粒表面裂纹的方向一致性与其择优取向紧密相关。上述结果表明在合适的工艺条件下，气相传输平衡

广西云南鳅属鱼类一新种——靖西云南鳅

2008年5月,在广西壮族自治区靖两县禄洞村珠江水系采集到一批条鳅标本.经鉴定,为云南鳅属(Yunnanilus)-新种.新种靖西云南鳅(Yunnanilus jinxiensis)属于侧纹云南鳅种组(Yunnanilus pleurotaenis group).但新种全身除胸腹部外被有鳞片;侧线较长,具有15-20个侧线管孔;背鳍分枝鳍条8;胸鳍分枝鳍条13-14;鳔两室,后室发达;尾鳍凹形;体长为体高的3.9-_4.6倍,为头长的4.1-4.4倍,为尾柄高的7.5-9.0倍;头长为眼径的5.5-6.7倍,为眼间距的2.2-2.4倍等特征,可将新种与该种组内的其他种类相区分.

光照、温度及宿主粘液对河鲈锚首吸虫虫卵孵化的影响

光照、温度及宿主粘液对河鲈锚首吸虫虫卵孵化的影响夏晓勤，聂品，姚卫建（中国科学院水生生物研究所，武汉４３００７２）关键词河鲈锚首吸虫，虫卵孵化，鳜鱼ＥＦＦＥＣＴＳＯＦＬＩＧＨＴ，ＴＥＭＰＥＲＡＴＵＲＥＡＮＤＨＯＳＴＭＵＣＵＳＯＮＴＨＥＥＧＧＨＡＴＣＨ...

20种鲤科鱼类同工酶的表型分析及有关进化问题的探讨

本文对20种鲤科鱼类的同工酶表型进行了分析比较。鲌亚科中存在几种不同的LDH同工酶表型,以各种LDH同工酶表型所组成的一些类群,反映出亚科水平中属间的亲缘关系。按同工酶的表型可将它们分为4个类群,这些类群的划分和进化趋异的过程是与经典的系统分类相一致的。按LDH同工酶表型的异同可将鲌亚科、密鲴亚科和鲢亚科的鱼类划分成两个主要的支系。一支鱼类是具有相同迁移率的LDH-A-4 同工酶,其中包括鲌亚科的多数鱼类,由LDH 同工酶的表型推断它们与雅罗鱼亚科有较密切的亲缘关系;另一支鱼类则是具有相同迁移率的 LDH

Gut contents of bighead carp (Aristichthys nobilis) and the processing and digestion of algal cells in the alimentary canal

Bighead carp is one of the most important freshwater filter-feeding fish of Chinese aquaculture. In recent decades, there have been a number of contradictory conclusions on the digestibility of algae by bighead carp based on the results from gut contents and digestive enzyme analysis or radiolabelled isotope techniques. Phytoplankton in the gut contents of bighead carp (cultured in a large net cage in Lake Donghu) were studied during March-May. In biomass, the dominant phytoplankters in the fore-gut contents were the centric diatom Cyclotella (average 54.5%, range 33.8-74.3%) and the dinoflagellate Cryptomonas (average 22.8%, range 6.8-55.8%). Phytoplankton in water samples were generally present in proportionate amounts in samples from the fore-guts of bighead carp. The size of most phytoplankton present in the intestine of bighead carp was between 8 and 20 mum in length. Bighead carp was also able to collect particles (as small as 5-6 mum) much smaller than their filtering net meshes, suggesting the importance of mucus in collecting small particles, Examination of the change in the integrity of Cyclotella on passage through the esophagus of bighead carp indicated that disruption of the algal cell walls is principally by the pharyngeal teeth, explaining the previous contradictory conclusions. (C) 2001 Elsevier Science B.V. All rights reserved.

Growing 20 cm Long DWNTs/TWNTs at a Rapid Growth Rate of 80-90 mu m/s

Submitted by 阎军 (yanj@red.semi.ac.cn) on 2010-04-13T16:03:37Z No. of bitstreams: 1 Growing 20 cm Long DWNTsTWNTs at a Rapid Growth Rate of 80-90 mu ms .pdf: 3229914 bytes, checksum: 0259795afb443dc6901c11df5ecd325a (MD5)

Mode characteristics of semiconductor equilateral triangle microcavities with side length of 5-20 mu m

Semiconductor equilateral triangle microresonators (ETRs) with side length of 5, 10, and 20 mum are fabricated by the two-step inductively coupled plasma (ICP) etching technique. The mode properties of fabricated InGaAsP ETRs are investigated experimentally by photoluminescence (PL) with the pumping source of a 980-nm semiconductor laser and distinct peaks are observed in the measured PL spectra. The wavelength spacings of the distinct peaks agree very well with the theoretical longitudinal mode intervals of the fundamental transverse modes in the ETRs, which verifies that the distinct peaks are corresponding to the enhancement of resonant modes. The mode quality factors are calculated from the width of the resonant peaks of the PL spectra, which are about 100 for the ETR with side length of 20 mum.

Selective and lithography-independent fabrication of 20 nm nano-gap electrodes and nano-channels for nanoelectrofluidics applications

A new method has been developed to selectively fabricate nano-gap electrodes and nano-channels by conventional lithography. Based on a sacrificial spacer process, we have successfully obtained sub-100-nm nano-gap electrodes and nano-channels and further reduced the dimensions to 20 nm by shrinking the sacrificial spacer size. Our method shows good selectivity between nano-gap electrodes and nano-channels due to different sacrificial spacer etch conditions. There is no length limit for the nano-gap electrode and the nano-channel. The method reported in this paper also allows for wafer scale fabrication, high throughput, low cost, and good compatibility with modern semiconductor technology.