Shock tube study of JP-10 ignition delay time

JP-10 (exo-tetrahydrodicyclopentadiene, C10H16) ignition delay times were measured in a preheated shock tube. The vapor pressures of the JP-10 were measured directly by using a high-precision vacuum gauge, to remedy the difficulty in determining the gaseous concentrations of heavy hydrocarbon fuel arising from the adsorption on the wall in shock tube experiments. The whole variation of pressure and emission of the OH or CH radicals were observed in the ignition process by a pressure transducer and a photomultiplier with a monochromator. The emission of the OH or CH radicals was used to identify the time to ignition. Experiments were performed over the pressure range of 151-556 kPa, temperature range of 1000-2100 K, fuel concentrations of 0.1%-0.55% mole fraction, and stoichiometric ratios of 0.25, 0.5, 1.0 and 2.0. The experimental results show that for the lower and higher temperature ranges, there are different dependency relationships of the ignition time on the temperature and the concentrations of JP-10 and oxygen.

10°尖锥标模高超声速动导数的实验测量

在中科院力学所JF-4B高超声速脉冲风洞中，用模型自由飞方法对10~。尖锥开展动态实验测量，并用参数微分法辨识得到了该模型的俯仰阻尼导数。实验结果表明，脉冲风洞中模型自由飞方法得到的10~。尖锥标模高超声速动态气动特性测量值与国外可比数据一致，重复测量精度与弹道靶试验相当。

国际尖端材料技术协会(SAMPE)第24届技术会议和第3届金属及金属加工会议(1992年10月20—22日,加拿大多伦多)

<正> 国际尖端材料技术协会(SAMPE:Society for the Advancement of Material and Process Engineering)于1992年10月20—22月在加拿大多伦多市召开了两个国际学术会议:第24届国际SAMPE技术会议(24th Int.SAMPE Techn。Coaf。)和第3届国际金属与金属加工会议(3rd Int.SAMPE Metals and Metals Processin Conf.)。两个会议同时举行,全体会议(Plenary Session)在一个会场举行。前者的主题是“先进材料迎接经济的挑战”;后者的主题是“合成与加工的新进展”.尽管此二会议是在西方发达国家经济很不景

DG-10型数字光栅测微仪

本文介绍一种0～10mm、分辨率1μm数字光栅测微仪,它是一种具有任意零点、高精度的测长系统,由光栅位移传感器和数显仪两部分组成。介绍了其工作原理、主要技术指标和应用。

在高超声速脉冲风洞中使用的六分量天平测力系统和10°尖锥模型的气动力测量

在中国科学院力学研究所的 JF-4B 高超声速脉冲风洞中,对于半锥角为10°的尖锥模型进行了来流马赫数为7.8和9.9的吹风实验,在不同的α角和β角下使用六分量的压电天平进行了气动力测量。用以鉴定六分量测力系统的可靠性,并检验了新的试验段和α角与β角分别单独可变的模型支架对模型测力实验是否有干扰。实验结果与文献给的结果进行比较表明:六分量压电天平测力系统给出的实验数据是比较可靠的。

DG-10数显光栅测微仪

<正> 由中国科学院力学研究所研制的DG-10数显光栅测微仪,经中国计量科学研究院检定,其主要技术指标: 1.量程0-10mm;2.分度值0.001mm;3.示值误差在全量程内为±0.001mm;4.回程误差0.001mm;5.测杆受径向力作用时示值变化0.001mm。

结构弛豫对Zr_(64.13)Cu_(15.75)Ni_(10.12)Al_(10)块体非晶合金硬度和剪切带特征的影响

通过接近玻璃转变温度的等温退火获得不同弛豫状态的Zr64.13Cu15.75Ni10.12Al10块体非晶合金样品。利用维氏显微硬度计和洛氏硬度计研究结构弛豫对合金硬度和压痕周围剪切带特征的影响规律。结果表明:在590K等温退火处理使Zr64.13Cu15.75Ni10.12Al10块体非晶合金发生焓弛豫行为,其维氏显微硬度随退火时间的延长较快增加后趋于稳定,而大载荷洛氏硬度对结构弛豫不敏感。通过洛氏压痕周围剪切带特征的研究,定量比较了结构弛豫对剪切带间距、数量的影响规律。

碳纳米管-Mg_(65)Cu_(25)Gd_(10)非晶复合材料玻璃转变的动力学性质

制备了Mg65Cu25Gd10大块非晶合金及其碳纳米管(CNTs)复合材料,对两种材料进行了不同扫描速率下的差热扫描量热分析,研究了加入CNTs对材料玻璃转变和晶化动力学效应的影响。结果表明:加入CNTs后,复合材料的玻璃转变和晶化行为仍然具有动力学效应,但加入的CNTs减小了材料晶化行为对升温速率的依赖程度;同时,加入CNTs加大了材料发生玻璃转变时需要克服的能量势垒,增大了峰值温度时的晶化反应速率常数,从而降低了材料的玻璃形成能力(GFA);对CNTs降低GFA的原因也进行了探讨。

微重力落管法制备Nd_(60)Al_(10)Fe_(20)Co_(10)非晶薄片的磁性能研究

采用微重力落管法制得了Nd6 0 Al1 0 Fe2 0 Co1 0 非晶薄片 .利用X衍射 (XRD)分析了Nd6 0 Al1 0 Fe2 0 Co1 0 非晶薄片的结构特征 .用振动样品磁强计 (VSM)研究了其磁性能 .结果表明微重力落管法制得的非晶薄片具有硬磁性 ,与快速非平衡凝固(如甩带法 )试样的XRD相比 ,尽管其曲线还是较为典型的非晶相漫散衍射峰 ,但已有少量的不规则的类似晶化的突起小峰 ,表明该非晶片中已经有微量晶态合金或者细小晶粒析出 ,初步分析可能是生成了类似于亚稳A1 相的短程有序原子团簇或者是较大尺寸的纳米晶 ,这种短程有序原子团簇或纳米晶是Nd6 0 Al1 0 Fe2 0 Co1 0 非晶薄片显示硬磁性的主要原因

激光熔覆大厚度Fe_(57)Co_8Ni_8Zr_(10)Si_4B_(13)非晶表层及其微结构研究

利用激光熔覆制备出1.2mm厚的Fe_(57)Co_8Ni_8Zr_(10)Si_4B_(13)大厚度非晶表层。用XRD,ES,TEM,DSC及硬度对获得的非晶表层进行了多种分析，研究了非晶合金表层的微结构与非晶形成能力。初步探讨了大厚度非晶表层的形式机制。

Nd_(60)Al_(10)Fe_(20)Co_(10)大块金属玻璃的玻璃转变和晶化过程

本文利用DSC、X射线衍射和动态力学分析以及扫描电子显微镜研究了Nd_(60)Al_(10)Fe_(20)Co_(10)大块金属玻璃(BMG)的玻璃转变和晶化过程。结果表明,合金的动态力学分析结果清楚地反映出材料的玻璃转变和晶化过程。由此确定材料的玻璃转变温度为493K,初始晶化温度为590K。X射线衍射和组织分析表明合金的晶化过程为:非晶α→非晶α’+未知亚稳NdFeAl相→非晶α’+初晶δ相→初晶δ相+共晶δ相+Nd_3Co+Nd_3Al。

Generation of 17-TW 23-fs pulses with a two-stage Ti : Sapphire amplifier at repetition rate 10 Hz

We have developed a two-stage Ti:sapphire amplifier system which can produce 17-TW/23-fs pulses at a repetition rate 10 MHz. A birefringent plate is used in the regenerative amplifier to alleviate gain narrowing, while an all-reflective cylindrical-mirror-based pulse stretcher and an acousto-optic programmable dispersive filter (AOPDF) are used to compensate for the higher order dispersion of the system.

Femtosecond optical Kerr effect study of Ge(10)AS(40)S(30)Se(20) film

The results of the femtosecond optical heterodyne detection of optical Kerr effect at 805 nm with the 80 fs ultrafast pulses in amorphous Ge10As40S30Se20 film is reported in this paper. The film shows an optical non-linear response of: 200 fs under ultrafast 80 fs-pulse excitation and the values of real and imaginary parts of non-linear susceptibility chi((3)) were 9.0 X 10(-12) and -4.0 X 10(-12) esu, respectively. The large third-order non-linearity and ultrafast response are attributed to the ultrafast distortion of the electron orbits surrounding the average positions of the nucleus of Ge, As, S and Se atoms. This Ge10As40S30Se20 chalcogenide glass would be expected as a promising material for optical switching technique. (c) 2005 Elsevier Ltd. All rights reserved.

Preparation, characterization and gas sensing properties of lead tetra-(tert-butyl)-5,10,1 5,20-tetraazaporphyrin spin-coating films

A spin-coated film of lead tetra-(tert-butyl)-5,10,15,20-tetraazaporphyrin complex (PbTAP(t-Bu)(4)) was obtained and characterized by IR spectra, absorption spectra and atomic force microscopy. The response and recovery characteristics of the film to NH3, NO2 and C2H5OH vapor were investigated at room temperature. In addition, the reversibility and stability of the film to NH3 were also studied. The results indicate that the PbTAP(t-Bu)(4) derivative can be exploited as an NH3 sensor at room temperature. (c) 2007 Elsevier B.V. All rights reserved.