476 resultados para ER-YAG LASERS
Resumo:
Single-frequency output power of 7.3 W at 2.09 mu m from a monolithic Ho:YAG nonplanar ring oscillator (NPRO) is demonstrated. Resonantly pumped by a Tm-doped fiber laser at 1.91 mu m, the Ho:YAG NPRO produces 71% of slope efficiency with respect to absorbed pump power and nearly diffraction-limited output with a beam quality parameter of M-2 approximate to 1.1. (c) 2008 Optical Society of America
Resumo:
The YAG crystal codoped with Yb3+ and Tm3+ has been grown by Czochralski (Cz) method. The crystal structure of the crystal has been determined by X-ray diffraction analysis. The absorption and emission spectra of Yb,Tm:YAG crystal at room temperature have also been studied. The emission cross-sections have been calculated by Fuechtbauer-Ladenburg formula and reciprocity method. (C) 2007 Elsevier B.V. All rights reserved.
Resumo:
We report both continuous-wave and passively mode-locked laser actions in a Yb3+-doped gadolinium yttrium oxyorthosilicate Yb:GdySiO(5) (Yb:GYSO) crystal. Continuous-wave (CW) laser operations were compared under different pump conditions with high-power diodes of different wavelengths and fiber cores. CW mode-locking was obtained with a semiconductor saturable absorber mirror.
Resumo:
An Ho3+-doped YAlO3 (Ho : YAP) single crystal has been grown by the Czochralski technique. The polarized absorption spectra, polarized fluorescence spectra and fluorescence decay curve of the crystal are measured at room temperature. The spectroscopic parameters are calculated based on Judd-Ofelt theory, and the effective phenomenological intensity parameters Omega(2,eff), Omega(4,eff) and Omega(6,eff) are obtained to be 2.89 x 10(-20), 2.92 x 10(-20) and 1.32 x 10(-20) cm(2), respectively. The room-temperature fluorescence lifetime of the Ho3+ 5I(7) -> I-5(8) transition is measured to be 8.1 ms. Values of the absorption and emission cross-sections with different polarizations are presented for the I-5(7) manifold, and the polarized gain cross-section curves are also provided and discussed.
Resumo:
There are two different effects to generate group delay dispersion by multilayer thin film mirrors: chirper effect and Gires-Tournois effect. Both effects are employed to introduce desired dispersion in the designed mirror. Thus the designed mirror provides large dispersion throughout broad waveband. Such mirror can be used for dispersion compensation in Ti:sapphire femtosecond lasers. Most group delay dispersion of a 5-mm Ti:sapphire crystal can be compensated perfectly with only four bounces of the designed mirror.
Resumo:
A number of 355-nm Al2O3/MgF2 high-reflectance (HR) coatings were prepared by electron-beam evaporation. The influences of the number of coating layers and deposition temperature on the 355-nm Al2O3/MgF2 HR coatings were investigated. The stress was measured by viewing the substrate deformation before and after coating deposition using an optical interferometer. The laser-induced damage threshold (LIDT) of the samples was measured by a 355-nm Nd:YAG laser with a pulse width of 8 ns. Transmittance and reflectance of the samples were measured by a Lambda 900 spectrometer. It was found that absorptance was the main reason to result in a low LIDT of 355-nm Al2O3/MgF2 HR coatings. The stress in Al2O3/MgF2 HR coatings played an unimportant role in the LIDT, although MgF2 is known to have high tensile stress.
Resumo:
We design and experimentally demonstrate some negative dispersion mirrors with optimized Gires-Tournois interferometers. The mirror structure is composed of 38 alternating Ta2O5 and SiO2 layers and could be regarded as two sections: high-reflectivity section consisting of a series of quarter-wavelength optical thickness stacks and negative-dispersion section consisting of only 13 layers. The designed mirrors exhibit the expected performance. These mirrors were fabricated by using ion beam sputtering. By adopting such mirrors, dispersion of a mode-locked femtosecond Ti:sapphire laser has been compensated for mostly. With two series of the mirrors, 32 fs and 15 fs pulses have been obtained respectively.
Resumo:
The single- and multi-shot damage behaviors of HfO2/SiO2 high-reflecting (HR) coatings under Nd:YAG laser exposure were investigated. Fundamental aspects of multi-shot laser damage, such as the instability due to pulse-to-pulse accumulation of absorption defect and structural defect effect, and the mechanism of laser induced defect generation, are considered. It was found in multi-shot damage, the main factors influencing laser-induced damage threshold (LIDT) are accumulation of irreversible changes of structural defects and thermal stress that induced by thermal density fluctuations.
Resumo:
作为微电子和光电子系统中普遍使用的一种结构材料,单晶硅一直是人们研究的焦点。长期以来,人们对其电学性质进行了非常深入细致的研究,却疏于对其抗击强激光辐照特性的研究。随着激光通讯和光电对抗技术的发展,对光学材料的激光破坏特性和加固技术进行研究的需求也显得越来越迫切。本文主要对单晶硅的抗激光损伤特性进行研究,研究了单晶硅材料在1064nmNd:YAG激光自由脉冲输出模式和单脉冲输出模式作用下的损伤特性,通过对两种激光作用下单晶硅损伤形貌的分析,在热效应与热力耦合模型的基础上,对单晶硅的激光损伤机制进行了探索。
Resumo:
The laser-induced damage (LID) behavior of narrow-band interference filters was investigated with a Nd:YAG laser at 1064 nm under single-pulse mode and free-running mode. The absorption measurement of such coatings was performed with surface thermal lensing (STL) technique. The damage morphologies under the two different laser modes were also studied in detail. It was found that all the filters exhibited a pass-band-center-dependent absorption and laser-induced damage threshold (LIDT) behavior, but the damage morphologies were diverse. The explanation was given with the analysis of the electric field distribution and the operational behavior of the irradiation laser. (c) 2005 Elsevier B.V. All rights reserved.
Resumo:
以1030nm高反.940。980nm高透的波长分离膜作为实例,为提高该薄膜元件的波长分离效果,从膜系的优化方面做了一系列的研究。诸如采用带通滤光片的设计思想,在膜堆两侧加入了匹配层,调整膜堆的周期厚度,并用膜系设计软件对通带作进一步的优化。通过这一系列的优化设计后.利用RF双离子柬溅射工艺在BK7玻璃基底上沉积样品薄膜,并在基底背面加镀通带增透膜。结果显示,透射带在940和980nm处的透过率分别为97.73%和93.63%.反射带在1030nm的反射率为99.99%。对所制备的样品薄膜进行了激光损伤阈
Resumo:
采用计算模拟的方法.研究了光栅式扫描预处理的扫描方式以及脉冲能量波动、定位误差对预处理效率的影响。研究发现。脉冲能量波动及其定位误差使预处理效率降低,同时其影响与扫描方式之间存在相互调制作用.因此可以通过选择合适的扫描方式以及扫描间隔来优化预处理流程,提高预处理效率。此外发现,光斑呈等边三角形排列时的预处理效率优于正方形。
Resumo:
Snakehead fish (Ophiocephalus argus cantor), silver carp (Hypophthalmichthys molitrtix), crucian carp (Carassius carassius), and common carp (Cyprinus carpio) are four common freshwater fish species in China. In this study, the level of methylmercury (MeHg), total mercury (T-Hg), and total selenium (T-Se) in muscle samples of these four fish species from Ya-Er Lake, China, were analyzed using atomic fluorescence spectrometry coupled with high-performance liquid chromatography, and inductively coupled plasma mass spectrometry. The concentrations of MeHg in all the fish species were significantly correlated with those of T-Hg. Higher T-Hg and MeHg concentrations had accumulated in the snakehead fish, which is a strongly predatory fish, than in the other three species. The concentration ratios of MeHg and T-Hg in the muscles of these four fish species were almost equal. Conversely, there was negative correlation between the concentrations of T-Hg and T-Se, which implies that there is a competition between these two elements with respect to bioaccumulation. It is noteworthy that of all the muscle samples tested, the level of T-Hg exceeded the maximum allowable limit in fish [0.4 mg kg(-1) (w/w) recommended by the World Health Organization] in 38.46% of those of the silver carp, 18.18% of those of the crucian carp, and 100% of those of snakehead fish. These results show that the consumption of contaminated fish is a potential threat to human health and that necessary preventive measures to safeguard public health should be emphasized.