高压下石榴石Gd_3In_2Ga_3O_(12)的合成

Gd_3Ga_5O_(12)稀土材料具有Ga~(3+)离子易于被其它离子部分取代的特点.Gd_3Sc_2Ga_3O_(12),Gd_3Lu_2Ga_3O_(12)和Gd_3In_2Ga_3O_(12)作为膜磁光材料YIG和Y_(3-x)Bi_xFe_5O_(12)的衬底引起关注. 这些材料可以通过固相反应、浮熔法、提拉法合成,但它们的高压合成未见报道.本文首次利用高温高压方法实现了Gd_3In_2Ga_3O_(12)的合成,并对其合成区进行了研究.

Studies on simultaneous crystallization of polypropylene/nylon 12 blends

The effect of the morphology of polypropylene (PP)/nylon 12 (PA12) blends on their crystallization behaviour is studied using differential scanning calorimetry and scanning electron microscopy. In PP/maleated polypropylene (PP-MA)/PA12 = 65/10/25 blend, simultaneous crystallization of the PP/PA12 blend occurs under some conditions. When the diameter of the dispersed phase (PA12) is smaller than 0.5 mu m, PP crystallizes first and its crystals induce the crystallization of PA12. When some of the PA12 particles are larger than 0.5 mu m, this part of PA12 crystallizes first. Then this part of the PA12 crystals induces the crystallization of PP, and PP crystals induce the crystallization of PA12 fine droplets in turn.

双电荷离子［C_（12）H_（12）N_2O］~（2＋）和［C_（12）H_（12

双电荷离子［Ｃ_（１２）Ｈ_（１２）Ｎ_２Ｏ］~（２＋）和［Ｃ_（１２）Ｈ_（１２）Ｎ_２Ｓ］~（２＋）的气相单分子分解反应研究任达，贾维平，李智立，刘淑莹（中国科学院长春应用化学研究所，长春，１３００２２）关键词双电荷离子，质量分析离子动能谱，串联质谱，４...

杂多酸在活性炭上的固载化Ⅳ．活性炭在酸性介质中对硅钼（SiMo_（12））和磷钼（PMo_（12））杂多酸的吸附

在氢离子浓度均为３ｍｏｌ／Ｌ的硫酸，盐酸，磷酸，醋酸水溶液中和冰醋酸中研究了具有Ｋｅｇｇｉｎ结构的硅相（ＳｉＭｏ（１２））和磷钼（ＰＭｏ（１２））杂多酸在不同来源活性炭上的吸附作用，在酸性介质中，其吸附量均比在水溶液中有所增加，但如果考虑吸附量与体系酸强度之间的关系，实验结果表明，ＳｉＭｏ（１２）和ＰＭｏ（１２）之间存在着不同的规律。

杂多酸在活性炭上的固载化Ⅲ．活性炭在酸性介质中对钨硅杂多酸（SiW_（12））的吸附

在氢离子浓度均为３ｍｏｌ／Ｌ的硫酸，盐酸，磷酸，醋酸水溶液中和冰醋酸中研究了具有Ｋｅｇｇｉｎ结构的硅钨杂多酸（ＳｉＷ＿（１２））在不同来源活性炭上的吸附作用。各活性炭对ＳｉＷ＿（１２）吸附等温线的形式是不相同的，吸附剂载体的微孔结构以及杂多酸的溶剂化起着重要的作用。并且在无机酸介质中，杂多酸的吸附量比在水溶液中成规律性地增加，且与酸强度成正比关系。在有机酸介质中，吸附作用比较复杂。根据所得结果，提出了在酸性介质中杂多酸在活性炭表面的吸附模型。

乙丙共聚物熔融接枝甲基丙烯酸环氧丙酯

乙丙共聚物熔融接枝甲基丙烯酸环氧丙酯张晓民，尹志辉，殷敬华（中国科学院长春应用化学研究所高分子物理开放实验室长春１３００２２）关键词乙丙共聚物，甲基丙烯酸环氧丙酯，接枝共聚接枝共聚物可作为不相容共混体系的增容剂［１，２］，反应加工法制备乙丙共聚物（Ｅ...

COMPATIBILIZATION AND STRUCTURE OF POLY(PROPYLENE) NYLON-12 BLENDS

In this paper, scanning electron microscopy (SEM), differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) were used to study the structure and compatibilization of poly(propylene) (PP)/nylon-12 (PA 12) blends. The compatibilizatio

Characterization of 1:12 Phosphomolybdic Anions Doped Polypyrrole (PMo12/PPy) Film Electrode

1:12 phosphomolybdic anion doped polypyrrole film electrode was characterized by in-situ UV-vis spectroelectrochemistry, X-ray photoelectron spectroscopy(XPS), scan electronic microscopy(SEM) and electron spin resonance(ESR) spectroscopy.

水合希土硝酸盐与本并及单环己基－12－冠－4配合物的合成、性质及晶体结构

在乙腈介质中合成了苯并－１２－冠－４（简称Ｂ－１２－Ｃ－４）和单环己基－１２－冠－４（简称Ｃｙ－１２－Ｃ－４）的六种希土配合物：ＲＥ（ＮＯ３）３·Ｂ－１２－Ｃ－４（ＲＥ＝Ｐｒ，Ｇｄ，Ｙｂ，Ｌｕ），ＲＥ（ＮＯ３）３·Ｃｙ－１２－Ｃ－４（ＲＥ＝Ｌａ，Ｌｕ）．研究了它们的ＩＲ及１ＨＮＭＲ性质，并测定了四种单晶的结构．用ＩＮＤＯ法计算了Ｌｕ（ＮＯ３）３·Ｂ－１２－Ｃ－４，Ｌｕ（ＮＯ３）３·Ｃｙ－１２－Ｃ－４的电子结构．结果表明．Ｂ－１２－Ｃ－４与希土的配合物稳定性按Ｐｒ，Ｇｄ，Ｙｂ，Ｌｕ顺序减弱，并且Ｃｙ－１２－Ｃ－４与希土的配位能力大于Ｂ－１２－Ｃ－４．发现冠醚分子通过自身不同程度的扭曲，改变冠醚环空穴的大小，实现与不同大小的希土离子的配位作用．

杂多酸的固载化Ⅲ．溶剂对H_4SiW_（12）O_（40）·24H_2O在活性

研究了Ｈ＿４ＳｉＷ＿（１２）Ｏ＿（４０）·２４Ｈ＿２Ｏ（ＳｉＷ＿（１２））在水、乙醇、乙酸、乙酸丁酯中在活性炭上的吸附得出，活性炭微孔结构对ＳｉＷ＿（１２）在其表面的吸附起着分子筛作用。水溶剂化的ＳｉＷ＿（１２）分子可顺利进入活性炭１．７ｎｍ左右的微孔，而其它溶剂化的ＳｉＷ＿（１２）分子，则需较大的孔径。提出了ＳｉＷ＿（１２）在活性炭表面吸附的微孔中孔扩散模型。

（C_（12）H_8）~（2＋）离子中电荷定位的理论研究

本文用半经验量子化学方法ＭＮＤＯ研究了由联苯衍生物产生的［Ｃ１２Ｈ８］２＋双电荷离子的结构，讨论了其中的电荷定位和影响离子稳定性的因素，双电荷离子的两个电荷分别定位于两个苯环上，表明该离子是由联苯衍生物经两步反应产生。

CRYSTAL-STRUCTURE OF [YB (NO3)3 (PHEN) (H2O)]CENTER-DOT(12-CROWN-4)

The title complex was prepared by reacting Yb(NO3)3 (12-crown-4) with 1, 10-phenanthiroline (hereafter phen) in acetone. It crystallized in the triclinic space group P1BAR with a = 10.095(5), b = 17.415(4), c = 8.710(2) angstrom; alpha = 92.45(2), beta = 115.83(3), gamma = 74.08(3)degrees and D(c), = 1.85 g cm-3; Z = 2. The metal ion in this complex is nine-coordinated to three bidentate nitrate ions, two nitrogen atoms of a phen and a water molecule. The crown ligand is hydrogen bonded to the coordination water molecule. The symmetry change of the crown ether is also discussed.

STUDY OF A 1/12 PHOSPHOMOLYBDIC ANION DOPED POLYPYRROLE FILM ELECTRODE AND ITS CATALYSIS

A phosphomolybdic anion doped polypyrrole (PMo12O403- + PPy) film electrode has been prepared by electrochemical polymerization of pyrrole in an aqueous solution of 0.5 mol l-1 H2SO4 or 0.5 mol l-1 KNO3 containing PMo12O403- anions, and characterized by scanning electron microscopy and in-situ UV-visible spectroelectrochemical methods. The film electrode obtained is very stable upon potential cycling in acidic solution, but not in neutral solution. The catalytic effect of the film electrode on the reduction of ClO3- and BrO3- was studied.

SYNTHESIS AND MOLECULAR-STRUCTURE OF NBU2[(MEO)3C6H2C(O)N2CHC6H4O]SN FORMED IN THE REACTION OF DI-N-BUTYLTIN(IV) OXIDE WITH 3,4,5-TRIMETHOXY-BENZOYL SALICYLAHYDRAZONE

The title complex was synthesized and characterized by H-1, C-13, Sn-119 NMR and IR spectra. A single crystal X-ray diffraction study confirmed its molecular structure and revealed that 3,4,5-trimethoxy-benzoyl salicylahydrazone was a tridentate and approximately planar ligand. The complex crystallizes in the triclinic space group P1BAR with a = 9.208(3), b = 12.536(2), c = 12.187(4) angstrom, alpha = 113.12(2), beta = 90.58(2), gamma = 81.42(2), V = 1277.5(6) angstrom, Z = 2. The structure was refined to R = 0.033 and R(w) = 0.041 for 3944 observed independent reflections. The tin atom has a distorted trigonal bipyramidal coordination. The Sn-C bond lengths are 2.129(5) and 2.113(5) angstrom (av. 2.121(5) angstrom), the C-Sn-C angle is 123.3(2); the bond length between the tin atom and the chelating nitrogen is 2.173(3) angstrom. Two chain carbon atoms and the chelating nitrogen atom occupy the basal plane. The skeleton of two erect oxygen atoms and the tin atom is bent (O-Sn-O angle = 153.5(1)). In the complex, the ligand exists in the enol-form.