Gas-phase ion-molecule reactions of C-60 and theoretical studies of [C60C2H3O](+) adduct cations

Gas-phase ion-molecule reactions of buckminsterfullerene (C-60) with the acetyl cation CH3-C-+=O (m/z 43) and formylmethyl cation (CH2)-C-+-CH=O (m/z 43, or oxiranyl cation), generated from the self-chemical ionization of acetone and vinyl acetate, respectively, were studied in the ion source of a mass spectrometer. Adduct cations [C60C2H3O](+) (m/z 763) and protonated C-60, [C60H](+) (m/z 721), were observed as the major products. AM1 semiempirical molecular orbital calculations on the possible structures, stabilities and charge locations of the isomers of the adducts [C60C2H3O](+) were carried out at the restricted Hartree-Fock level. The results indicated that the sigma-addition product [C-60-COCH3](+) is the most stable adduct for the reaction of C-60 with CH3-C-+=O rather than that resulting from the [2+2] cycloaddition. The [2+3] cycloadduct and the sigma-adduct [C60CH2CHO](+) might be the most possible coexisting products for the reactions of C-60 with (CH2)-C-+-CH=O or oxiranyl cation. Other [C60C2H3O](+) isomers are also discussed. (C) 1997 by John Wiley & Sons, Ltd.

Roles of oxygen vacancy and lower valence metallic ion in direct decomposition of NO over La-2-x(Sr,Th)(x)CuO4+/-lambda

Two systems of La2-xSrxCuO4+/-lambda and La2-xThxCuO4+/-lambda, mixed oxides with K2NiF4 structure were synthesized. The compositions and structures of the catalysts were characterized by means of XRD, XPS, chemical analysis and so on. The catalytic behavior for the direct decomposition of NO has been investigated. The results show that the catalytic activity is closely related to the oxygen vacancy and lower valence metallic ion in the direct decomposition of NO. The presence of oxygen vacancy is necessary for mixed oxide to have steady activity in NO decomposition.

Miscibility of linear low density polyethylene (LLDPE)-graft-poly(methyl methacrylate) with poly(vinylidene fluoride) (PVF2) and its application as compatibilizer LLDPE/PVF2 blends

Differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS) were used to study the miscibility of blends of a graft copolymer of poly(methyl methacrylate) on linear low density polyethylene (LLDPE-g-PMMA, G-3) with poly(vinylidene fluoride)(b) (PVF2) and the compatibilization of blends of LLDPE/PVF2. The specific interaction between PMMA side chains and PVF2 in G-3/PVF2 binary blends is weaker than that between the homopolymers PMMA and PVF2. There are two states of PVF2 in the melt of a G-3/PVF2 (60/40, w/w) blend, one as pure PVF2 and the other interacting with PMMA side chains. The miscibility between PMMA side chains and PVF2 affects the crystallization of PVF2. LLDPE-g-PMMA was demonstrated to be a good compatibilizer in LLDPE/PVF2 blends, improving the interfacial adhesion and dispersion in the latter. Diffusion of PMMA side chains into PVF2 in the interfacial region reduces the crystallization rate and lowers the melting point (T-m) and the crystallization temperature (T-c) of PVF2 in the blends.

Relationship between the structure and catalytic activity of La2-xSrxNiO4-lambda(0<=x<=1) mixed oxides for NH3 oxidation

A series of samples having the composition of La2-xSrxNiO4(0 less than or equal to x less than or equal to 1) were prepared and used as catalysts for NH3 oxidation. It was found that the La and oxygen vacancies exist in the La2-xSrxNiO4-lambda(0 less than or equal to x less than or equal to 1). The unit cell volume decreases with the increase of x. For bath c and a parameters there appeared a turning point at x = 0.5. Doping with a lower valence cation Sr2+ in the case of La2NiO4 resulted in an increase of Ni3+, consequently the formation of oxygen vacancies, the increase of reducing ability and the increase of catalytic activity. In the oxygen TPD of La2-xSrxNiO4(0 less than or equal to x less than or equal to 1) appeared three peaks, the alpha' peak at about 400K was attributed to the surplus oxygen desorption, the a peak at 700K which approaches to a maxium at x = 0.6 was attributed to the oxygen adsorbed at oxygen vacancies. The beta peak at about 1000K which depends closely on the x and favors the catalytic activity was attributed to the reduction of Ni3+. The catalytic activity of La-2-x SrxNiO4 mixed oxides in the NH3 oxidation in general could be attributed to the extent of the redox reaction: 2Ni(2+) + O-2 + V-0(..) reversible arrow 2Ni(3+) + 20(-) where V-0(..) representes the oxygen vacancies and O- the oxygen species adsorbed at the vacancies.

La_(2-x)Sr_xNiO_(4-λ)系列催化剂结构与氨氧化活性的关系

本文报道了La_(2-x)Sr_xNiO_(4-λ)(O≤x≤1)系列复合氧化物的固体结构性质和用于氨的氧化制硝酸的催化性能.La_(2-x)Sr_xNiO_(4-λ)的晶胞体积Ⅴ随x的增大而逐渐减小;c轴在x≤0.5前逐渐增大,在x≥0.5后逐渐减小.a轴在x≤0.5前逐渐减小,在x≥0.5后基本保持恒定.在x≤0.5前,La_(2-x)Sr_xNiO_(4-λ)中存在氧过剩,在x≥0.5后存在氧缺陷.TPD表明,a氧(吸附在氧缺陷上的氧)在x=0.6时出现极大,β氧(晶格氧)随x增大而逐渐增大.La_(2-x)Sr_xNiO_(4-λ)的氧化还原能力,Ni~(3+)的量,氨氧化的NO选择性都随x增大而增加.由此得出,Ni~(3+)是催化剂的活性离子,β氧是氨的氧化的活性氧种,在La_(2-x)Sr_xNiO_(4-λ)上的氨的氧化遵循氧化还原(Redox)机理.

差分电化学质谱方法（DEMS）的回顾 Ⅰ．DEMS原理和发展

差分电化学质谱（ＤＥＭＳ）是将电化学和质谱技术相结合而发展起来的一种现代电化学现场测试手段。它可现场检测电化学反应中的挥发性气体产物及动力学参数，中间体及其结构的性质等。当电极反应产物为共析出时，ＤＥＭＳ技术可同时确定每种产物的法拉第电流随电极电位或时间的变化．全文分两部分，第一部分回顾ＤＥＭＳ方法的原理与发展；第二部分介绍ＤＥＭＳ方法的应用．本文为其中之第一部分．

LIFETIME MEASUREMENTS OF SOME TMI ODD PARITY LEVELS

Eleven new lifetimes of odd parity excited energy levels in four configurations: 4f12 5d 6s 6p, 4f12 6S2 6p, 4f13 5d 6s and 4f13 6s 7s of atomic thulium have been mesured with atomic-beam laser spectrocopy. Two pulsed dye lasers are used for stepwise excitation and the time-resolved fluorescence decay was used to determine lifetime values. The accuracy of the measurements is about 10%.

(η~5-C_9H_7)_2Yb(THF)_2的晶体结构

双(茚基)镱(Ⅱ)四氢呋喃配合物(η~5-C_9H_7)_2Yb(THF)_2的晶体属单斜晶系,C_c空间群,晶体学参数a=13.506(4),b=11.081(2),c=15.577(5),β=92.68(3)°,V=2329(1),D_c=1.56g/cm~3,Z=4,μ=42.4cm~(-1),F(000)=1088,最终编离因子R=0.029,R_w=0.031。中心离子Yb~(2+)与两个茚基以η~5形式成键且与两个四氢呋喃中的氧成键,茚基的两个质心和四氢呋喃中的两个氧形成扭曲的四面体,Yb~(2+)在四面体的中心。Yb~(2+)的配位数为8。Yb~(2+)到质心In1的距离为2.52,到质心In2的距离为2.40。Yb~(2+)到O(1)的键长为2.356(7),到O(2)的键长为2.417(5)。

沸石基质中Eu~(3+)的还原及Eu~(2+)的稳定性

低温弱还原条件下,在沸石基质中获得了稳定的Eu~(2+)。借助程序升温还原(TPR)技术考察了沸石中Eu~(3+)→Eu~(2+)还原温度及价态转换途径。通过穆斯堡尔谱讨论了价态转换过程中,铕离子在沸石笼结构中的配位环境及其与沸石骨架的相互作用。光电子能谱和荧光光谱数据表明,Eu~(2+)在沸石基质中价态是稳定的。

无机-有机辐射接枝共聚物的表征

本文以X-线衍射、裂解色谱、GPC以及XPS等手段,着重研究了用预辐照法合成的氧化镁、二氧化硅、Y型分子筛等无机化合物与甲基丙烯酸甲酯、苯乙烯、丙烯腈等烯类单体的辐射接枝共聚物。

本体聚合稀土异戊橡胶的加工性能

对2L釜合成的5个本体聚合稀土异戊橡胶(LnIR)胶样([η]=2.38～8.10 dL/g)的辊筒行为、挤出行为,硫化特性和硫化胶性能进行了研究。结果表明,LnIR具有明显的素炼降解行为,混炼辊筒温度不宜低于70℃,混炼行为与NR和溶液聚合钛系异戊橡胶(IR-10)相当,在110～130℃时,胶料的挤出性能可达良级;口型膨胀(B)位随温度和生胶[η]的增大而略有增加,在[η]相同时,B值与IR-10胶料相近。但小于NR胶料。硫化湿度为143℃时,LnIR硫化胶的性能除拉伸强度和扯断伸长率外,其他均对硫化时间不敏感,从综合性能考虑,硫化时间应为20～40min,LnIR硫化胶的拉伸强度和撕裂强度稍低于IR-10和NR硫化胶,而回弹性、低温性能、生热和抗湿滑性等均优于或相当于后两者。为获得良好综合性能的硫化胶。LnIR[η]应为4.0～6.0dL/g。

COMPARISON OF THE BEHAVIOR OF CYCLIC AND LINEAR POLYSTYRENE IN DILUTE-SOLUTION

Using a low angle laser light scattering photometer, the second virial coefficients (A2) of both cyclic and linear polystyrene were determined in cyclohexane, toluene and methyl ethyl ketone (MEK) solutions. From the data obtained in cyclohexane solution the theta-temperature of cyclic polystyrene was determined to be 30-degrees-C. In toluene solution A2 of cyclic polystyrene is smaller than that of linear polystyrene with the same molecular weight, but in MEK the values are similar.

热分解法制备希土氧化物超微粉末

超微粉未已被视为九十年代的新材料,它的许多奇特的性质和令人惊异的应用不仅引起人们的重视,并开展了许多研究。但目前对希土金属及其化合物的超微粉未的研究则报道甚少。尽管如此,希土超微粉未已经在磁性材料、超导材料、传感器、超高温耐热合金等方面获得应用,并取得了明显的效果。超微粉末的合成方法其多,但均不成熟、寻求合成希土超微粉末的方法则是一个重要的课题。我们在研究醇盐法制备氢氧化钕、氧化钕超微粉末的同时,采用热分解法制备了一系列希土氧化物超微粉末,观察了它们粒径变化的规律,得到一些新的结果。