La_2O_3-Ni/SrAl_(12)O_(19)催化剂上甲烷与二氧化碳重整反应的研究

采用ＸＲＤ、ＵＶ－ＤＲＳ、Ｈ２－Ｏ２滴定、ＴＰＲ、吡啶吸附红外光谱等技术，研究了Ｌａ２Ｏ３助剂对Ｌａ２Ｏ３－Ｎｉ／ＳｒＡｌ１２Ｏ１９催化剂的还原性、表面酸性、金属镍的分散度和抗烧结能力，以及对催化甲烷与二氧化碳重整制取合成气反应性能的影响．结果表明，在负载型的镍催化剂中，添加Ｌａ２Ｏ３助剂，能够削弱金属组分与载体之间的相互作用，降低催化剂的还原性，提高金属镍在催化剂表面的分散度和在反应过程中的抗烧结能力，降低催化剂表面酸性．关联甲烷与二氧化碳重整反应活性的结果，发现影响负载型镍催化剂的反应活性、稳定性和积炭性质的主要因素是金属镍的分散状态，而不是催化剂表面酸性．Ｌａ２Ｏ３主要是通过改变镍的分散度来影响催化甲烷与二氧化碳重整反应活性的．

维生素B_(12)修饰电极及其催化氧还原性质的研究

发现维生素B12能吸附在经阳极化处理的玻碳电极上，从而制成稳定的维生素B12修饰玻碳电极．详细研究了此电极的电化学性质．并发现此修饰电极能有效地催化分子氧的二电子还原.

YGa_(3-x)Cr_xB_4O_(12)的合成、发光与磁性

扩展了ＹＧａ３Ｂ４Ｏ１２的合成温度。研究了合成温度的改变及Ｃｒ３＋离子引入后发光性质的变化。合成ＹＧａ３－ｘＣｒｘＢ４Ｏ１２化合物后，对其磁学性质进行了表征。结果表明，高温合成该化合物有利于化合物荧光发射的增强，掺杂少量Ｃｒ３＋可以稳定该化合物的结构并改变其发光光谱。磁化率随Ｃｒ３＋含量的增加而增大。

4-羟基偶氮苯与6-氯-5,12-萘并萘醌反应产物的NMR分析

无水碳酸钾存在下6-氯-5,12-萘并萘醌与4-羟基偶氮苯在干燥DMF中反应的主要产物在某些反应条件下不是6[4-(苯基偶氮基)苯氧基]-5,12-萘并萘醌(1)。该未知反应产物2经核磁共振方法研究证实是6-(N,N-二甲氨基)-5,12-萘并萘醌。本文对化合物2的~1H-和~(13)C化学位移、偶合信息和结构作了详细归属,并推测其反应进程,实验结果表明,化合物2是由化合物1与溶剂DMF反应生成。

Studies on morphology and crystallization of polypropylene/polyamide 12 blends

Scanning electron microscopy (SEM) and an image analyser are used to study morphologies of the fractured surface, etched by hot phenol, of polypropylene/maleated polypropylene/polyamide 12 PP/PP-MA/PA12) = 65/10/25 blend and PP-MA/PA12 = 75/25 blend. The particle dimension and its distribution of PA12 dispersed phase in these blends are much lower and narrower than that of the PP/PA12. blends. Especially, most of the particles in the PP-MA/PA12 = 75/25 blend are smaller than 0.1 mu m. The effect of the morphology of PP/PA12 blends on their crystallization behaviour is studied using differential scanning calorimetry and SEM. PA12 dispersed phase coarsens during annealing in the PP/PP-MA/PA12 = 65/10/25 blend. The mechanism of coarsening of the PA12 dispersed phase is a coalescence process. The intense mixing between the PP component and the PA12 component through reaction of PP-MA and PA12 leads to a change of dynamic mechanical behaviour of the components. A separation method is used to separate the polyolefin parts (precipitated from hot phenol), from PA12 parts (hot phenol filtrate). Of PP/PP-MA/PA12 = 65/10/25 blend, infra-red measurements and elementary analysis show that the precipitate has a lower PA12 content than the feed, whereas the filtrate has a higher PA12 content. From PP-MA/PA12 = 75/25 blend, PA12 contents in the precipitate and the filtrate are the same as in the feed. This implies that all PA12 has reacted with all PP-MA in the latter case while not in the former case. Using the method of interface exposure, interfacial reaction of PP-MA with PA12 is studied by X-ray photoelectron spectrometry (X.p.s.). Copyright (C) 1996 Elsevier Science Ltd.

Epitaxial crystallization in the sPP/nylon-12 semicrystalline polymer system

The epitaxial crystallization behaviour of syndiotactic polypropylene (sPP) on highly oriented nylon-12 substrates has been investigated by means of transmission electron microscopy. The results obtained from bright field electron microscopy and electron diffraction indicate that sPP crystals grow epitaxially on the oriented nylon-12 substrate with their c-axes +/- 37 degrees apart from the chain axis of the nylon-12 substrate. The contact planes of the sPP crystals are the (100) lattice planes. Moreover, the epitaxial crystallization of nylon-12 on highly oriented sPP substrates from a dilute solution in cyclohexanone has also been studied using optical microscopy. The results show that the nylon-12 crystals grow epitaxially on the oriented sPP substrate with the oriented nylon-12 lamellae forming large, anisotropic domains. Copyright (C) 1996 Elsevier Science Ltd.

Electrochemical study of isopoly- and heteropoly-oxometallates film modified microelectrodes .6. Preparation and redox properties of 12-molybdophosphoric acid and 12-molybdosilicic acid modified carbon fiber microelectrodes

The redox behaviours of 12-molybdophosphoric acid (12-MPA) and 12-molybdosilicic acid (12-MSA) in aqueous acid media are characterized at the carbon fiber (CF) microelectrode. The preparation of CF microelectrode modified with 12-MPA or 12-MSA monolayer and the oxidation-reduction properties of the modified electrode in aqueous acid media or 50% (v/v) water-organic media containing some inorganic acids are studied by cyclic voltammetry. 12-MPA or 12-MSA monolayer modified CF microelectrode with high stability and redox reversibility in aqueous acidic media can be prepared by simple dip coating. The cyclic voltammograms of 12-MPA and 12-MSA and their modified CF microelectrodes in aqueous acid solution exhibit three two-electron reversible waves with the same half-wave potentials, which defines that the species adsorbed on the CF electrode surface are 12-MPA and 12-MSA themselves. The acidity of electrolyte solution, the organic solvents in the electrolyte solution, and the scanning potential range strongly influence on the redox behaviours and stability of 12-MPA or 12-MSA monolayer modified electrodes. On the other hand, the catalytic effects of the 12-MPA and 12-MSA and chlorate anions in aqueous acidic solution on the electrode reaction processes of 12-MPA or 12-MSA are described.

12－硅钨酸与γ-Al_2O_3载体表面的相互作用

研究了不同溶剂中ＳｉＷ１２在γ－Ａｌ２Ｏ３表面的吸附和溶脱规律，以ＩＲ，ＸＲＤ以及酸催化模型探针反应对吸附于γ－Ａｌ２Ｏ３表面的ＳｉＷ１２的存在形态和酸性进行了表征．尽管ＳｉＷ１２碱降解稳定性在常见杂多酸中最强，但由水溶液中吸附在γ－Ａｌ２Ｏ３表面的ＳｉＷ１２仍有一部分被该载体的碱性所降解．此外，在γ－Ａｌ２Ｏ３表面上ＳｉＷ１２质子的活动性大大减弱，其阴离子的热稳定性也明显降低．可以认为，ＳｉＷ１２的质子和Ｋｅｇｇｉｎ阴离子与γ－Ａｌ２Ｏ３表面均有直接相互作用.

活性炭固载杂多酸催化剂（SiW_（12）／C）气相催化酯化反应动力学的研究

在固定床积分反应器中，于８５～１６０℃温度区间内，在活性炭固载的硅钨酸催化剂上研究了合成乙酸乙酯和乙酸丁酯的酯化反应动力学。实验结果表明，在总压保持１．０１３×１０５ｐａ的条件下，酯化反应速率与反应物以及稀释剂的分压有密切的关系，并且醇结构不同，其酯化反应的动力学也不同，在此基础上，提出了酯化反应在活性炭固载杂多酸催化剂上的反应机理。

高压下石榴石Gd_3In_2Ga_3O_(12)的合成

Gd_3Ga_5O_(12)稀土材料具有Ga~(3+)离子易于被其它离子部分取代的特点.Gd_3Sc_2Ga_3O_(12),Gd_3Lu_2Ga_3O_(12)和Gd_3In_2Ga_3O_(12)作为膜磁光材料YIG和Y_(3-x)Bi_xFe_5O_(12)的衬底引起关注. 这些材料可以通过固相反应、浮熔法、提拉法合成,但它们的高压合成未见报道.本文首次利用高温高压方法实现了Gd_3In_2Ga_3O_(12)的合成,并对其合成区进行了研究.

Studies on simultaneous crystallization of polypropylene/nylon 12 blends

The effect of the morphology of polypropylene (PP)/nylon 12 (PA12) blends on their crystallization behaviour is studied using differential scanning calorimetry and scanning electron microscopy. In PP/maleated polypropylene (PP-MA)/PA12 = 65/10/25 blend, simultaneous crystallization of the PP/PA12 blend occurs under some conditions. When the diameter of the dispersed phase (PA12) is smaller than 0.5 mu m, PP crystallizes first and its crystals induce the crystallization of PA12. When some of the PA12 particles are larger than 0.5 mu m, this part of PA12 crystallizes first. Then this part of the PA12 crystals induces the crystallization of PP, and PP crystals induce the crystallization of PA12 fine droplets in turn.

双电荷离子［C_（12）H_（12）N_2O］~（2＋）和［C_（12）H_（12

双电荷离子［Ｃ_（１２）Ｈ_（１２）Ｎ_２Ｏ］~（２＋）和［Ｃ_（１２）Ｈ_（１２）Ｎ_２Ｓ］~（２＋）的气相单分子分解反应研究任达，贾维平，李智立，刘淑莹（中国科学院长春应用化学研究所，长春，１３００２２）关键词双电荷离子，质量分析离子动能谱，串联质谱，４...

杂多酸在活性炭上的固载化Ⅳ．活性炭在酸性介质中对硅钼（SiMo_（12））和磷钼（PMo_（12））杂多酸的吸附

在氢离子浓度均为３ｍｏｌ／Ｌ的硫酸，盐酸，磷酸，醋酸水溶液中和冰醋酸中研究了具有Ｋｅｇｇｉｎ结构的硅相（ＳｉＭｏ（１２））和磷钼（ＰＭｏ（１２））杂多酸在不同来源活性炭上的吸附作用，在酸性介质中，其吸附量均比在水溶液中有所增加，但如果考虑吸附量与体系酸强度之间的关系，实验结果表明，ＳｉＭｏ（１２）和ＰＭｏ（１２）之间存在着不同的规律。

杂多酸在活性炭上的固载化Ⅲ．活性炭在酸性介质中对钨硅杂多酸（SiW_（12））的吸附

在氢离子浓度均为３ｍｏｌ／Ｌ的硫酸，盐酸，磷酸，醋酸水溶液中和冰醋酸中研究了具有Ｋｅｇｇｉｎ结构的硅钨杂多酸（ＳｉＷ＿（１２））在不同来源活性炭上的吸附作用。各活性炭对ＳｉＷ＿（１２）吸附等温线的形式是不相同的，吸附剂载体的微孔结构以及杂多酸的溶剂化起着重要的作用。并且在无机酸介质中，杂多酸的吸附量比在水溶液中成规律性地增加，且与酸强度成正比关系。在有机酸介质中，吸附作用比较复杂。根据所得结果，提出了在酸性介质中杂多酸在活性炭表面的吸附模型。