Effects of the stocking density and body size of the mitten crab (Eriocheir sinensis) on aquatic plant biomass

Experiments in tanks and cages were conducted to examine the effects of stocking density and body size of the Mitten crab (Eriocheir sinensis) on transplanted submersed macrophyte biomass. The early juvenile crab with 7.0 +/-0.6 mm. carapace width (CW) had little effect on plant biomass, regardless of the stocking densities. However, larger crabs (CW: 18.0 +/-2.2,35.0 +/-3.6, and 60.0 +/-5.7 mm) significantly influenced plant biomass, especially at large stocking densities. Predictive models, using crab body size and stocking density, were generated to demonstrate effect of the mitten crab on the changes Of plant biomass. The results indicate that dense mitten crab populations may adversely affect aquatic plant communities, particularly when its animal food resources are scarce.

Utilization of several plant proteins by gibel carp (Carassius auratus gibelio)

Six isonitrogenous (gross protein content 35%) and isoenergetic (gross energy content 17 kJ g(-1)) diets were formulated to investigate the effects of inclusion of plant proteins on the gibel carp (Carassius auratus gibelio L.). The plant proteins tested were: soybean cake (SBC), potato protein concentrate (PPC), peanut cake (PNC), cottonseed cake (CSC) and rapeseed cake (RSC). Fish meal (FM) was used as control. In each diet, 27% of the protein was supplied by fish meal, and the rest supplied by the plant protein tested. Each diet was fed to three groups of gibel carp for 8 weeks in a recirculation system. Specific growth rate (SGR) in fish fed the control diet was significantly higher than those in the other groups, and SGR in fish fed the PPC was significantly lower than in fish fed other plant proteins. There was no significant difference in SGR among the other groups. Feeding rates were ranked in the order: RSC > CSC > FM > PNC > SBC > PPC. Conversion efficiency was highest in groups fed FM, SBC and PNC, followed by groups fed CSC and RSC, and was lowest in the group fed PPC. The fish fed PPC showed lower protein retention than those fed FM and SBC. FM showed highest energy retention while PPC showed lowest, There was no significant relationship between SGR and intake of digestible protein (g g(-1) day(-1)), digestible lysine (g g(-1) day(-1)), digestible methionine (g g(-1) day(-1)) or digestible total essential amino acids (g g(-1) day(-1)), suggesting that the differences in SGR could not alone account for any of these variables.

Determining of the delay time for a heating ventilating and air-conditioning plant using two weighted neural network approach

This paper presents an two weighted neural network approach to determine the delay time for a heating, ventilating and air-conditioning (HVAC) plan to respond to control actions. The two weighted neural network is a fully connected four-layer network. An acceleration technique was used to improve the General Delta Rule for the learning process. Experimental data for heating and cooling modes were used with both the two weighted neural network and a traditional mathematical method to determine the delay time. The results show that two weighted neural networks can be used effectively determining the delay time for AVAC systems.

Determining of the delay time for a heating ventilating and air-conditioning plant using multi-weights neurons approach

This paper presents an multi weights neurons approach to determine the delay time for a Heating ventilating and air-conditioning (HVAC) plan to respond to control actions. The multi weights neurons is a fully connected four-layer network. An acceleration technique was used to improve the general delta rule for the learning process. Experimental data for heating and cooling modes were used with both the multi weights neurons and a traditional mathematical method to determine the delay time. The results show that multi weights neurons can be used effectively determining the delay time for HVAC systems.

Operational characteristics of a 1.2-MW biomass gasification and power generation plant

In this study, we analyzed the operational characteristics of a 1.2-MW rice husk gasification and power generation plant located in Changxing, Zhejiang province, China. The influences of gasification temperature, equivalence ratio (ER), feeding rate and rice husk water content on the gasification characteristics in a fluidized bed gasifier were investigated. The axial temperature profile in the dense phase of the gasifier showed that inadequate fluidization occurred inside the bed, and that the temperature was closely related to changes in ER and feeding rate. The bed temperature increased linearly with increasing ER when the feeding rate was kept constant, while a higher feeding rate corresponded to a lower bed temperature at fixed ER. The gas heating value decreased with increasing temperature, while the feeding rate had little effect. When the gasification temperature was 700-800C, the gas heating value ranged from 5450-6400kJ/Nm3. The water content of the rice husk had an obvious influence on the operation of the gasifier: increases in water content up to 15% resulted in increasing ER and gas yield, while water contents above 15% caused aberrant temperature fluctuations. The problems in this plant are discussed in the light of operational experience of MW-scale biomass gasification and power generation plants.

Design and Operation of A 5.5 MWe Biomass Integrated Gasification Combined Cycle Demonstration Plant

The design and operation of a 5.5 MWe biomass integrated gasification combined cycle (IGCC) demonstration plant, which is located in Xinghua, Jiangsu Province of China, are introduced. It is the largest complete biomass gasification power plant that uses rice husk and other agricultural wastes as fuel in Asia. It mainly consists of a 20 MWt atmospheric circulating fluidized-bed gasifier, a gas-purifying system, 10 sets of 450 kW(e) gas engines, a waste heat boiler, a 1.5 MWe steam turbine, a wastewater treatment system, etc. The demonstration plant has been operating since the end of 2005, and its overall efficiency reaches 26-28%. Its capital cost is less than 1200 USD/kW, and its running cost is about 0.079 USD/kWh based on the biomass price of 35.7 USD/ton. There is a 20% increment on capital cost and 35% decrease on the fuel consumption compared to that of a 1 MW system without a combined cycle. Because only part of the project has been performed, many of the tests still remain and, accordingly, must be reported at a later opportunity.

半干旱风沙区植物功能特性与植物功能型研究

半干旱风沙区是我国北方土地沙漠化严重的生态脆弱地区，建设和保护本区植被是生态建设和环境保护的当务之急。为了深入了解半干旱风沙区的植被的组成和演替动态，为当地的植被管理提供建议，本文以科尔沁沙地乌兰敖都地区为例，比较系统地探讨了本区植被的数量特征、筛选出90种具有代表性的植物种类，研究了各物种的62种功能特性、并对代表种进行植物功能型划分，从植物功能特性和功能型的角度分析了半干旱风沙区植被的分布动态和管理。 研究结果表明：（1）90种代表植物的38种营养阶段特性和24种繁殖阶段特性之间呈现显著相关（P＜0.05）的特性对的比例要低于营养阶段和繁殖阶段内部，与营养特性显著相关（P＜0.05）的特性对占总显著相关特性对的83.9%，营养特性是植物生长过程中非常重要的特性；（2）应用62种功能特性将90种代表植物划分为6类植物功能型，植物体内氮和钾含量、营养扩散、种子萌发率、叶面积和叶体积等是本区植物重要的功能特性，6类植物功能型分别以豆科植物、菊科植物、多年生C3草本植物、单子叶草本植物、叶片较小的植物和叶片较大植物为主的类群；（3）生长在各种沙丘上的群落类型的功能多样性低于生长在草甸草原和丘间低地植物群落中的功能多样性；（4）土壤有机质、全氮、全磷、地下水位和速效钾是影响植物种类、群落、植物功能特性和功能型分布的重要因素。