具有环氧化酶-2选择性抑制活性的多取代蒽醌的合成

1-甲基-2-甲氧羰基-3, 6, 8-三羟基-7-甲氧基蒽醌是从唐菖蒲干球茎中分离到的具有环氧化酶-2选择性抑制活性的多取代蒽醌类化合物。本文试图合成该化合物，实现了其类似物的合成，同时发现了几个未见报道的反应。 1．通过Diels-Alder 反应合成了关键中间体——3-甲基-5-羟基-1, 2, 4-苯三甲酸三甲酯，1-COOMe选择性水解产物与1, 2, 3-三甲氧基苯进行分子间Friedel-Crafts反应的产物再进行分子内Friedel-Crafts反应得到了目标产物的类似物1-甲基-2-甲氧羰基-3-羟基-6，7，8-三甲氧基蒽醌（路线1）。目标产物及其它类似物的合成正在进行中。 2．以乙酰乙酸甲酯和巴豆醛为原料，经过Michael加成、分子内的Aldol反应、芳香化、选择性甲酰化和还原反应，得到关键中间体2-甲基-3-羟甲基-6-甲氧基苯甲酸甲酯及其衍生物。通过该化合物与3，4，5-三甲氧基苯甲酸甲酯进行Friedel-Crafts烷基化反应得到了多取代的二苯基甲烷衍生物，拟进一步关环合成目标化合物（路线2）。 3．发现邻甲氧基苯甲酸甲酯中酯甲基可以被正丁基锂和仲丁基锂中烷基交换生成相应的酯，反应的机理不明确。当使用叔丁基锂时，得到的是邻甲氧基苯基叔丁酮，这个方法可以用来合成芳基叔丁酮类化合物。 4．以2-苄氧基-6-甲基苯甲酸甲酯为原料进行氯甲基化反应时，以苯和二氯乙烷作溶剂，发生了苄基的迁移和芳环的偶联，分别得到2，2'-二甲基-3，3'-二甲氧羰基-4，4'-二羟基联苯和2，2'-二甲基-3，3'-二甲氧羰基-4，4'-二羟基-5，5'-二苄基联苯。这是对称联苯合成的新方法。 5．水杨酸羟基邻对位的选择性甲酰化可以分别通过水杨酸和水杨酸甲酯用HMTA/CF3COOH来实现。 6．Lewis酸催化3，4，5-三甲氧基苄醇环化成1, 2, 3, 6, 7, 8, 11, 12, 13-nonamethoxyl-10,15-dihydro-5H-trbibenzo [a, d, g] cyclononene (NDTC)，产率(54%)高于已有方法（12%）。 Methyl 3,6,8-trihydroxy-7-methoxy-1-methylanthraquinone-2-carboxylate is a new COX-2 selective inhibitor isolated from Gladiolus gandavensis. Two strategies were investigated to synthesis this compound, in which some important reactions were discovered. 1. The key intermediate 5-hydroxy-3-methylbenzene-1,2,4-tricarboxylic acid 2,4-dimethyl ester was prepared via Diels-Alder reaction followed by selective hydrolysis of 1-COOMe. This compound was coupled with 1,2,3-trimethoxybenzene and the product undergo intramolecular Friedel-Crafts reaction to give methyl 3-hydroxy-5,6,7-trimethoxy-1-methylanthraquinone-2-carboxylate (1st route). The target compound and other analogues are being prepared with the same procedure. 2. The key intermediates methyl 3-hydroxymethyl-6-methoxy-2-methylbenzoate and its derivatives were prepared starting from crotonaldehyde and methyl acetoacetate via Michael addition, intramolecular aldol reaction, aromatization, formylation and reduction. The intermediates were coupled respectively with derivatives of gallic acid to give polysubstituted diphenylmethane. However, attempts to cyclize these compounds to the target compounds and analogues were not successful (2nd route). 3. In the process for ortho-lithiation of methyl 2-methoxybenzoate, the substrate converted respectively to n-butyl 2-methoxybenzoate and sec-butyl 2-methoxybenzoate when n-BuLi and sec-BuLi were used. However, tert-BuLi reacted with methyl 2-methoxybenzoate afford 2-methoxyphenyl tert-butyl ketone, which could be used to synthesize aryl tert-butyl ketones. 4. The transformtion of methyl 2-benzoxy-6-methylbenzoate to dimethyl 4,4'-dihydroxy-2,2'-dimethylbiphenyl-3,3'-dicarboxylate in benzene, and dimethyl 5,5'-dibenzyl-4,4'-dihydroxy-2,2'-dimethylbiphenyl-3,3'-dicarboxylate in 1,2-dichloroethane in the presence of ZnCl2 provides a new method for the synthesis of symmetric biphenyl. 5. The formylation of salicylic acid at C-5 and methyl 2-hydroxybenzoate at C-3 could be regioselectively realized by using HMTA/CF3COOH. 6. Racemic 1, 2, 3, 6, 7, 8, 11, 12, 13-nonamethoxyl-10, 15-dihydro-5H-trbibenzo [a, d, g] cyclononene was prepared via Lewis acids catalyzed trimerization of 3, 4, 5-trimethoxylbenzyl alcohol with yield (54%) higher than the reported procesure (12%).

糖原酸酯合成方法的研究以及二环糖胺的合成

在糖化学中，糖原酸酯是一类重要的合成中间体，广泛运用于1,2-反式糖苷的合成，尤其对于寡糖的立体选择性合成具有重要的价值。目前文献报道的制备糖原酸酯的方法大多存在对环境不友好的问题。本文对传统的糖原酸酯制备方法进行了改进，通过研究发现无机碱也能够有效地催化合成糖原酸酯。以溴代糖和醇（或糖基受体）为原料，在无机碱、四丁基溴化铵、乙腈的体系中，合成了一系列简单醇糖原酸酯和糖-糖原酸酯。 聚乙二醇及其衍生物作为有机反应的溶剂和催化剂在有机化学中有广泛的应用。本文阐述了一种以溴代糖和醇（或糖基受体）为原料，在无机碱和聚乙二醇二甲醚反应体系中合成糖原酸酯的方法。该方法中，聚乙二醇二甲醚即作为绿色溶剂又作为催化剂，反应条件温和、环保、高效。 糖胺是一类重要的糖苷酶抑制剂，已在糖尿病和其他代谢紊乱等疾病的治疗中发挥了极其重要的作用。本文提供了一种合成一类具有潜在的糖苷酶抑制活性、结构新颖的二环糖胺的途径。该合成思路是以1-叠氮基-2-C-乙酰甲基-3,4,6-三-O-苄基-2-脱氧-β-D-葡萄糖为原料，经二环糖亚胺中间体，通过二环糖亚胺还原或加成得到一类二环糖胺。 Sugar orthoesters as one of the most important intermediates in carbohydrate chemistry, are used extensively in the synthesis of sugar 1,2-trans-glycosides, especially oligosaccharide. These methods in the literature are mostly eco-unfriendly. Herein we described a modified protocol for the preparation of sugar orthoesters using inorganic base, by improving the conventional method. Our method involves the treatment of peracetylated or perbenzotlated glycosyl bromides with alcohols in the presence of a quaternary ammonium salt and an inorganic alkali in acetonitrile solvent, affording both simple sugar orthoesters and sugar-sugar orthoesters. Polyethylene glycol and their derivatives as solvents or catalysts play a significant role in the organic reaction. We developed a novel and environmentally benign methodology towards the synthesis of sugar orthoesters, which are prepared by the reaction of peracetylated or perbenzotlated glycosyl bromides and alcohols in the presence of dimethyl ether of polyethylene glycol as either the reaction medium or catalyst. Glycosylamines and pseudo-glycosylamines have been tested against various glycosidases, and applied to the treatment of diabetes and other metabolic disorders. We presented a route of the synthesis of a bicyclic glycosylamine as a potential glycosidases inhibitor with unique structure. Reduction of 2-C-acetlymethyl-β-glucopyranosyl azide derivative firstly produced a bicyclic glycosylimine intermediate, and subsequently the bicyclic glycosylamine and its derivatives would be prepared through the selective reduction or addition the C=N double bond of the bicyclic glycosylimine intermediate.

硫手性有机小分子催化剂的设计、合成及其在不对称亚胺氢转移还原中的应用

过去十多年，世界手性药物市场需求迅速增长，手性制药工业的发展壮大，已经引起了各国政府、学术界，特别是企业界的高度重视。手性药物中含有大量的手性胺单元，因此研究高效构建手性胺结构单元的方法具有重要的意义和实用价值，而亚胺的不对称还原是合成手性胺最便捷的方法。 手性有机小分子路易斯碱催化三氯氢硅不对称还原亚胺是最近几年才发展起来的一类新的亚胺不对称还原方法。尽管在对映选择性和底物适用范围等方面已经获得了突破性的进展，但是，高性能的路易斯碱催化剂仅局限于N-甲酰氨基酸酰胺一种类型，而且其底物适用范围和催化活性仍不够理想。因此，发展新型催化剂很有必要。 手性硫氧化物作为手性诱导剂的应用已经有数十年的时间，广泛应用在不对称合成及天然产物的全合成中。理论上，硫氧结构单元也可以作为路易斯碱，对硅烷类试剂进行活化，而且硫氧键还有碳氧键难以比拟的先天优势，硫原子自带手性特征，在反应过程中，手性中心离反应位点更近，因此，从手性硫氧化合物出发，极有可能开发出新的高效手性路易斯碱催化剂。最近，Kobayashi和Khiar在亚胺的不对称烯丙基化反应中用手性亚砜活化烯丙基三氯硅烷，获得了较好的ee值，但反应中手性亚砜的用量都需要化学计量以上，因此还不能算做真正意义上的催化剂，进一步的文献调研也未见真正意义上的硫手性有机小分子催化剂。 本文首次成功将硫手性亚磺酰胺衍生物应用于催化三氯氢硅对亚胺的不对称还原，在经过对亚磺酰胺衍生物的多次结构优化，开发出了合成容易，催化活性和立体选择性都很优良，并且有着前所未有的底物普适性的新型手性路易斯碱催化剂。 我们首先尝试将商品化的20mol%叔丁基亚磺酰胺和对甲基亚磺酰胺直接用作催化剂催化三氯氢硅对亚胺的不对称还原，尽管仅获得中等的收率和很低的对映选择性，但证明我们的设计思路是可行的。在此基础上，我们以叔丁基亚磺酰胺为原料和基本骨架，设计合成了一系列的亚磺酰胺类催化剂，通过对催化剂的结构改造，发现当催化剂中存在较强酸性的酚羟基时，催化效果得到大幅提高。随着对催化剂的进一步结构优化，我们找到了一个结构简单，催化效果还不错的催化剂，经过反应条件优化以后，催化反应的收率最高能达到98%，对映选择性最高达93%，并且这个催化剂的底物适应范围比之前报道的催化剂都要广泛。针对酚羟基在催化剂中的重要作用，我们进行了仔细的机理研究后发现，在催化反应中，催化剂极有可能是通过双分子机理去活化三氯氢硅从而实现不对称催化的，而酚羟基的作用就是通过分子间氢键促进双分子催化剂与三氯氢硅的络合。受此启发，我们设计了一系列具有双齿结构的催化剂，通过对双齿催化剂的结构优化，最终筛选出了一个结构更加简单，但催化效果更好的双齿催化剂。10mol%该催化剂催化亚胺还原最高获得95%的收率和96%的ee值。这一结果也进一步验证了我们先前对催化剂机理的推测。 随后，我们还尝试将这些催化剂用于二级胺和芳香酮的直接还原胺化反应中，虽然能获得不错的收率，但对映选择性却很差，我们对反应条件进行了仔细的摸索，仍然没有获得突破。但这些实验为进一步研究二级胺和酮的不对称直接还原胺化反应奠定了良好的基础。 In the past decade, the rapid growth of the global chiral drug market and the significant development of the chiral pharmaceutical industry have attracted a great deal of attention from government, academia and enterprises. Chiral amine is an important structural motif of chiral drugs. Therefore, development of methods for the construction of this motif is of great importance. Catalytic enantioselective reduction of imines represents one of the most straightforward and efficient methods for the preparation of chiral amines. The chiral Lewis base organocatalysts promoted asymmetric reduction of imines by HSiCl3 has recently achieved significant advancements. Although big breakthroughs have been made in terms of substrate generality and enantioselectivity, the highly effective catalysts are limited to N-formyl amino acid amides, of which the efficiency and substrate scope remain unsatisfactory. Therefore, development of novel organocatalysts for this transformation is in great demand. Chiral sulfoxides have been well established as efficient and versatile stereocontrollers and have been extensively used in asymmetric synthesis and total synthesis of natural products. The S=O structural motif of sulfoxide could also behave as Lewis base activator for cholorsilane reagents, which, moreover, could be even better than caboxamide considering that the sulfur atom is chiral and thus the chirality center is closer to the reaction center. There exist great potentials that highly effective novel Lewis base organocatalysts could be developed starting from S-chiral sulfoxides. Recently, several S-chiral sulfoxides were reported by Kobayashi and Khiar to be used as Lewis base catalyst to activate allyltrichlorosilanes in asymmetric allylations and good enantioselectivities were obtained. However, these S-chiral sulfoxides were all used at a more than stoichiometric amount and were thus not authentically catalytic. A careful literature survey further revealed that there has been so far no S-chiral organocatalyst available. In this study, we, for the first time, successfully used S-chiral sulfinamides as Lewis base organocatalysts for the asymmetric reduction of ketimines by HSiCl3. After several rounds of structural optimization, we developed the first example of highly effective S-chiral organocatalysts, which promoted the asymmetric reduction of ketimines with trichlorosilane in high yield and excellent enantioselectivity with unprecedented substrate spectrum. In our initial practice, we examined 20mol% of the commercially available (R)-tert-butanesulfinamide and (S)-toluenesulfinamide as the catalyst in the hydrosilylation of ketimine. Although the product was only furnished in moderate yield and low ee, these results demonstrated that our strategy of catalyst design is on the right way. Next, starting from chiral tert-butanesulfinamide, we prepared a series of tert-butanesulfinamide derivatives via simple reductive amination and examined their catalytic efficiencies in the reduction of ketimine. We found that the catalyst bearing a phenolic hydroxyl group exhibited good reactivity and enantioselectivity. On the basis of which, we obtained a structurally simple and highly effective novel organocatalyst, affording the product in 98% yield and 93% ee under optimal reaction conditions. After careful exploration on the role of phenolic hydroxyl group in the catalyst, we speculated that two molecules of the catalyst be involved in the course of reaction, of which the assembly around the silicon center is facilitated by the intermolecular hydrogen bonding through the phenolic hydroxyl groups. Thus, we incorporated two units of sulfonamide into one molecular and prepared a new type of bissulfinamides organocatalysts and examined their catalytic efficiencies in the reduction of ketimine. After optimizing the structure of these catalysts, we finally obtained a novel organocatalyst which has even simpler molecular structure but showed better efficacies, 10mol% of which afforded up to 97% yield and 96% ee under optimal reaction conditions. These results further proved our speculation about the catalytic mechanism. We also examined the newly developed S-chiral organocatalysts in direct asymmetric reductive amination of secondary amines with aromatic ketone. The product was furnished in good yield but in low ee. No better results could be obtained despite our intense opimization efforts. Nevertheless, these experiments laid excellent foundations for eventual success.

Thermodynamic studies of monuron

Monuron (C9H11ClN2O; N,N-dimethyl-N'-(4-chlorophenyl) urea, CAS 150-68-5) was synthesized and the heat capacities of the compound were measured in the temperature range from 79 to 385 K with a high precision automated adiabatic calorimeter. No phase transition or thermal anomaly was observed in this range. The enthalpy and entropy data of the compound relative to the reference temperature 298.15 K were derived based on the heat capacity data. The thermodynamic properties of the compound were further investigated through DSC and TG analysis. The melting point, the molar enthalpy, and entropy of fusion were determined to be 447.6 +/- 0.1 K, 29.3 +/- 0.2 kJ mol(-1), and 65.4 J K-1 mol(-1), respectively. (C) 2004 Elsevier B.V. All rights reserved.

Monolithic column with zwitterionic stationary phase for capillary electrochromatography

A capillary electrochromatography (CEC) monolithic column with zwitterionic stationary phases was prepared by in situ polymerization of butyl methacrylate, ethylene dimethacrylate, methacrylic acid, and 2-(dimethyl amino) ethyl methacrylate in the presence of porogens. The stationary phases have zwitterionic functional groups, that is, both tertiary amine and acrylic acid groups, so the ionization of those groups on the zwitterionic stationary phase was affected by the pH values of the mobile phase, and further affects the strength and direction of the electroosmotic flow (EOF). Separations of alkylbenzenes and polycylic aromatic hydrocarbons based on the hydrophobic mechanism were obtained. Separation of various types of polar compounds, including phenols, anilines, and peptides, on the prepared column were performed under CEC mode with anodic and cathodic EOF, and different separation selectivities of those polar analytes were observed on the monolithic capillary column by using mobile phases with different pH values.

Highly enantioselective conjugate addition of diethylzinc to acyclic enones with fine-tunable phosphite-pyridine ligands

A new series of fine-tunable phosphite-pyridine (P,N) ligands derived from (S)-2-amino-T-hydroxy-6,6'-dimethyl-1,1'-biphenyl and (S)-2-amino-2'-hydroxy-4,4',6,6'-tetramethyl-1,1'-biphenyl was employed in Cu(I)-catalyzed conjugate addition of diethylzinc to acyclic enones. Excellent enantioselectivities (up to 98% ee) and highly catalytic activities were achieved for a variety of acyclic enones.

Cyclopropanation on a highly active heterogeneous catalyst: CuO/TiO2-Al2O3

Some heterogeneous catalysts, cupric oxide supported on different supports, were prepared and employed to catalyze the cyclopropanation of styrene and 2,5-dimethyl-2,4-hexadiene with ethyl diazoacetate (EDA). The catalytic performance for cyclopropanation strongly depends on the nature of the support. A novel catalyst, CUO/TiO2-Al2O3, in which Al2O3 is modified with a monolayer TiO2, is found to be most active and selective for the cyclopropanation reaction. The yields of 93 and 94% cyclopropanes are obtained for styrene and 2,5-dimethyl-2,4-hexadiene at 40 degreesC as the substrates, respectively. The activity and selectivity in cyclopropanes are optimized with a monolayer dispersion of cupric oxide on the corresponding supports. (C) 2002 Elsevier Science B.V. All rights reserved.

The study on a PVC membrane electrode for gemfibrozil

In this paper, a poly(vinyl chloride) (PVC) membrane electrode is prepared for gemfibrozil, 2, 2-dimethyl-5(2,5-xylyloxy) valeric acid, based on its ion pair complexes with hexadecyltrioctyl ammonium iodide (HTOA). The membrane composition of the electrode was optimized by using the sequential level elimination method for orthogonal experimental design. The electrode has a Nernstian response range from 2.5 X 10(-5) to 0.1 mol/l with an average slope of 55.3 mV/decade. The limit of detection is 7.1 X 10(-6) mol/l. The electrode responses were not affected by pH in the range 10.0-12.3. A Na2B4O7-Na2CO3 buffer of pH = 11.0 was selected as the background electrolyte solution for potentiometric measurements. The electrode was used for determining gemfibrozil in pharmaceutical preparations with satisfactory results.

Structure of an unexpected trimer from the reaction of ageratochromene II with aluminum chloride

A new trimer from the reaction of ageratochromene [1] (6,7-dimethoxy-2,2-dimethyl-1-benzopyran) with anhydrous aluminum chloride was shown to be 3,4-dihydro-6,7-dimethoxy-2,2-dimethyl-3-(6',7'-dimethoxy-2',2'-di-methyl-2H-1-benzopyran-4'-yl)-4-(3" 4"-dihydro-6", 7"-dimethoxy-2",2"-dimethyl-2H-1-benzopyran-3"-yl)-2H-1-benzopyran. Its structure was confirmed by NMR (H-1, C-13, DEPT-135. COSY, HMBC, HSQC, TOCSY and NOESY), IR, mass spectra and elemental analysis. Copyright (C) 2002 John Wiley Sons, Ltd.

Validation and in situ application of an automated dissolved nickel monitor for estuarine studies

The validation of a fully automated dissolved Ni monitor for in situ estuarine studies is presented, based on adsorptive cathodic stripping voltammetry (AdCSV). Dissolved Ni concentrations were determined following on-line filtration and UV digestion, and addition of an AdCSV ligand (dimethyl glyoxime) and pH buffer (N-2-hydroxyethylpiperazine-N′-2-ethanesulphonic acid). The technique is capable of up to six fully quantified Ni measurements per hour. The automated in situ methodology was applied successfully during two surveys on the Tamar estuary (south west Britain). The strongly varying sample matrix encountered in the estuarine system did not present analytical interferences, and each sample was quantified using internal standard additions. Up to 37 Ni measurements were performed during each survey, which involved 13 h of continuous sampling and analysis. The high resolution data from the winter and summer tidal cycle studies allowed a thorough interpretation of the biogeochemical processes in the studied estuarine system.

A strategy for synthesis of ion-bonded amphiphilic miktoarm star copolymers via supramolecular macro-RAFT agent

Amphiphilic supramolecular miktoarm star copolymers linked by ionic bonds with controlled molecular weight and low polydispersity have been successfully synthesized via reversible addition-fragmentation chain transfer (RAFT) polymerization using an ion-bonded macromolecular RAFT agent (macro-RAFT agent). Firstly, a new tetrafunctional initiator, dimethyl 4,6-bis(bromomethyl)-isophthalate, was synthesized and used as an initiator for atom transfer radical polymerization (ATRP) of styrene to form polystyrene (PSt) containing two ester groups at the middle of polymer chain. Then, the ester groups were converted into tertiary amino groups and the ion-bonded supramolecular macro-RAFT agent was obtained through the interaction between the tertiary amino group and 2-dodecylsulfanylthiocarbonylsulfanyl-2-methyl propionic acid (DMP). Finally, ion-bonded amphiphilic miktoarm star copolymer, (PSt)(2)-poly(N-isopropyl-acrylamide)(2), was prepared by RAFT polymerization of N-isopropylacrylamide (NIPAM) in the presence of the supramolecular macro-RAFT agent. The polymerization kinetics was investigated and the molecular weight and the architecture of the resulting star polymers were characterized by means of H-1-NMR, FTIR, and GPC techniques. (c) 2008 Wiley Periodicals, Inc.

A Facile One-pot Synthesis of Substituted Pyridine-2,4(1H,3H)-diones from α-Acyl-α-carbamoyl Ketene-S,S-acetals

A facile and efficient one-pot synthesis of substituted pyridine-2,4(1H,3H)-diones has been developed. Subjected to N,N-dimethylformamide dimethyl acetal (DMFDMA) in N,N-dimethylformamide at 120 ˚C, a series of acyl(carbamoyl)ketene S,S-acetals were converted into the corresponding substituted pyridine-2,4(1H,3H)-diones in high yields.

Electroluminescence of hole block material caused by electron accumulation and hole penetration

In this study, we investigated the electroluminescence (EL) mechanisms and processes of hole block material in the multilayer devices with Eu(TTA)(3)phen (TTA = thenoyltrifluoroacetone, phen = 1,10-phenanthroline) doped CBP (4,4'-N,N'-dicarbazolebiphenyl) as the light-emitting layer (EML). First, the hole block ability of 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP) was experimentally confirmed by comparing the EL spectra. With increasing hole injection, BCP emission emerges and increases gradually due to the increasing hole penetration from EML into the hole block layer (HBL).

Efficient white organic light-emitting diodes using europium complex as the red unit

Efficient white organic light-emitting diodes (WOLEDs) using europium complex as the red unit are presented. The WOLEDs were fabricated by using the structure of indium tin oxide (ITO)/N, N'-di(naphthalene-1-yl)-N, N'-diphenyl-benzidine (NPB)/4,4-N, N-dicarbazolebiphenyl (CBP) : bis(2,4-diphenylquinolyl-N, C-2) iridium (acetylacetonate) ((PPQ)(2)Ir(acac)) : Eu (III) tris(thenoyltrifluoroacetone) 3,4,7,8-tetramethyl-1,10-phenanthroline (Eu(TTA)(3)(Tmphen))/NPB/2-methyl-9,10-di(2-naphthyl)anthracene (MADN) : p-bis (p-N, N-di-phenyl-aminostyryl)benzene (DSA-Ph)/9-dimethyl-4,7-diphenyl-1,10-phenanthroline (BCP)/tris(8-hydroxyquinoline) aluminium (Alq3)/LiF/Al.

A ternary supramolecular compound of p-sulfonatocalix[8]arene with 1D channels

A ternary supramolecular complex of [Ni(bipy)(2)(H2O)](4)(C8AS)center dot 17.6(H2O) (bipy=4,4'-dimethyl-2,2'-bipyridine and C8AS = p-sulfonatocalix[8]arene) has been synthesized by a hydrothermal method and characterized by FT-IR spectroscopy, TG-DTA analysis and single crystal X-ray diffraction. In the structure. the water-soluble p-sulfonatocalix[8]arene molecule adopts a double partial cone conformation and is coordinated by four nickel atoms each of which is bonded by two 4,4'-dimethyl-2,2'-bipyridine molecules and one water molecule at the same time. The tetranuclear Subunits are stacked into an extended 3D structure with 1D water-filled channels via hydrogen bonds and C-H center dot center dot center dot pi interactions.