Separation of yttrium from heavy lanthanide by CA-100 using the complexing agent

The selective extraction of yttrium front heavy lanthanide by liquid-liquid extraction using CA-100 in the presence of the complexing agent, such as EDTA, DTPA, and HEDTA was investigated. The extraction of heavy lanthanide in the present of the complexing agent was Suppressed when compared to that of Y because of the masking effect, but the selective extraction of Y was enhanced. All complexing agents formed 1: 1 complex with rare earth elements (RE), and only free rare earth ions could take part in the extraction. The condition for separation was obtained by exploring the effects of the complexing agent concentration, the extractant concentration, pH and the equilibration time on the extraction of the heavy rare earth elements.

Glassy carbon ceramic composite electrodes

A new carbon composite electrode material, based on dispersing glassy carbon (GC) microparticles into methyltrimethoxysilane-derived sol, is described in the present paper. The resulting glassy carbon ceramic composite electrodes (GCCEs) combine the electrochemical properties of GC with the advantages of composite electrodes, and thus offer high electrochemical reactivity, low background current and are easy to prepare, modify and renew. The new material has a low double-layer capacitance and a wide potential window. Scanning electron microscopy (SEM) images indicate significant difference in the structure of GCCE and carbon ceramic composite electrode (CCE). The electrochemical properties and advantages of GCCE should find broad utility in electroanalysis.

Independence of the brittle-ductile transition from the rubber particle size for impact-modified poly(vinyl chloride)

A series of acrylic impact modifiers (AIMS) with different particle sizes ranging from 55.2 to 927.0 nm were synthesized by seeded emulsion polymerization, and the effect of the particle size on the brittle-ductile transition of impact-modified poly(vinyl chloride) (PVC) was investigated. For each AIM, a series of PVC/AIM blends with compositions of 6, 8, 10, 12, and 15 phr AIM in 100 phr PVC were prepared, and the Izod impact strengths of these blends were tested at 23 degrees C. For AIMs with particle sizes of 55.2, 59.8, 125.2, 243.2, and 341.1 nm, the blends fractured in the brittle mode when the concentration of AIM was lower than 10 phr, whereas the blends showed ductile fracture when the AIM concentration reached 10 phr. It was concluded that the brittle-ductile transition of the PVC/AIM blends was independent of the particle size in the range of 55.2-341.1 nm. When the particle size was greater than 341.1 nm, however, the brittle-ductile transition shifted to a higher AIM concentration with an increase in the particle size. Furthermore, the critical interparticle distance was found not to be the criterion of the brittle-ductile transition for the PVC/AIM blends.

Characterization of the microstructure of biaxially oriented polypropylene using preparative temperature-rising elution fractionation

Two commercial biaxially oriented polypropylene (BOPP) resins, resin A and resin B, having different processing properties, were fractionated by preparative temperature-rising elution fractionation (TREF). The TREF fractions were further characterized by gel permeation chromatography (GPC), gel permeation chromatography coupled with light scattering (GPC-LS), wide-angle X-ray diffraction (WAXD), and differential scanning calorimetry (DSC). GPC-LS did not find visible long-chain branching in either resin A or B. The results from TREF and DSC indicate that the fractional melting parameter f(T) may be used to predict the profile of the TREF cumulative weight distribution curve. GPC results show that the molecular weights of the fractions tend to increase with elution temperature. WAXD and DSC data show that the crystallinity of fractions does not increase monotonically with increase of elution temperature. There appears to be a maximum in the plot of crystallinity versus elution temperature. The high-speed BOPP resin A has a lower isotacticity but a homogeneous isotacticity distribution and a higher molecular weight but a broader molecular weight distribution than resin B.

采用新萃取方法的PP-b-PE的研究

采用独特的二次溶解和沉淀的萃取方法,将PP b PE中的不可溶物与可溶物分离,并通过1 3C NMR,DSC,FT IR进行结构与性能的研究

复合氟化物中缺陷对Eu~(2+)光谱的影响

用传统的高温固相法及近几年兴起的温和水热法合成了KMgF3 ∶Eu多晶粉末 ,同时用Bridgman Stockbarger法生长了KMgF3 ∶Eu单晶体。对三种方法合成的样品进行比较发现 :水热和单晶样品中 ,除了Eu2 + 的f→f锐线发射外 ,还观察到了 4 2 0nm处的宽带发射 ;这些发射带主要应归属于晶体中存在的色心和氧中心。而且与高温样品相比 ,Eu2 + 在 36 0nm处的线发射强度明显减小 ,原因是发生了Eu2 + 到色心的能量传递

Lewis酸对杂多酸催化异丁烷/丁烯烷基化反应的作用Ⅰ.SbCl_5的修饰作用

考察了SbCl5对杂多酸 (HPA)催化i C4 H10 /C4 H8烷基化反应的修饰作用 ,用Hammett指示剂测定了SbCl5/HPA催化剂的酸强度 .结果表明 ,经SbCl5修饰的HPA的酸强度有所提高 ,SbCl5的加入量、反应温度及反应时间对烷基化油收率及产物分布均有不同的影响.

发光层的形态结构对电致发光器件性能影响的研究

详细研究了沉积在Poly( 9 vinylcarbazole) (PVK)薄膜上的 8 羟基喹啉铝 (Alq3 )薄膜的形态结构对电致发光器件ITO/PVK/Alq3 /Mg Ag性能的影响。研究结果表明 :发光层 (Alq3层 )的表面形貌极大地影响发光层和金属阴极的接触面积 ,从而影响器件的电流 电压特性。发光层的表面越均匀连续 ,发光层和金属阴极的接触面积就越大 ,通过器件的电流就越大。在三种条件的器件中 ,基底温度为 4 3 8K时制备的Alq3薄膜所对应的器件的量子效率最高 ,2 98K制备的器件的效率次之 ,77K制备的器件的效率最差。

Crystal structure and drawing-induced polymorphism in poly(aryl ether ether ketone). IV

A new crystal modification induced by strain and denoted as form II exists alongside the dominant form I structure in the uniaxially oriented poly(ether ether ketone) (PEEK) and the related polymers. The crystal structure of form II for PEEK is also found to possess a two-chain orthorhombic packing with unit cell parameters of a equal to 0.475 nm, b equal to 1.060 nm, and c equal to 1.086 nm. More extended and flattened chain conformation of form II relative to that of form I is expected to account for an 8% increase in c-axis dimension, which is attributed to the extensional deformation fixed in situ through strain-induced crystallization during uniaxial drawing. Annealing experiments suggest that form II is thermodynamically metastable and can be transformed into more stable form I by chain relaxation and reorganization at elevated temperature without external tension. This strain-induced polymorphism exists universally in the poly(aryl ether ketone) family. (C) 1999 John Wiley & Sons, Inc.

Tensile and transformational behavior of poly(ether sulfone) polycarbonate blends

Blends of a poly(ether sulfone) (PES) and a polycarbonate (PC) were prepared by melt-mixing and were studied by tensile tests, differential scanning calorimetry, dynamic mechanical analysis, density measurements and transmission electron microscopy (TEM). The blends were found to be two-phase systems and an interfacial layer was presumed to be formed between two phases, which was verified by TEM. A synergism of elongation at break and tensile modulus was shown in PES/PC blends. The effects of the crosshead speed on the mechanical properties were discussed for blends with different PES/PC weight ratios.