Experimental Setup for Assessing the Energetic Materials Deflagration Propagation under High Temperature and High Pressure Conditions

The technology of "explosion in fractures" is one of new synthetic engineering methods used in low permeability reservoirs. The most important problem arose from the technology is to assess the deflagration propagation capability of milky explosives in rock fractures. In order to investigate detailed this problem in the laboratory, an experimental setup was designed and developed in which different conditions can be simulated. The experimental setup mainly includes two parts. One is the experimental part and the other is the measurement part. In the experimental setup, the narrow slots with different width can be simulated; meanwhile, different initial pressures and initial temperatures can be loaded on the explosives inside the narrow slots. The initial pressure range is from 0-60 MPa, and the initial temperatures range is from room temperature to 100 V. The temperature and the velocity of deflagration wave can be measured; meanwhile the corresponding pressure in the narrow slot is also measured. In the end, some typical measurement results are briefly presented and discussed.

Influence of Contact Geometry on Hardness Behavior in Nano-indentation

In this paper the influence of contact geometry, including the round tip of the indenter and the roughness of the specimen, on hardness behavior for elastic plastic materials is studied by means of finite element simulation. We idealize the actual indenter by an equivalent rigid conic indenter fitted smoothly with a spherical tip and examine the interaction of this indenter with both a flat surface and a rough surface. In the latter case the rough surface is represented by either a single spherical asperity or a dent (cavity). Indented solids include elastic perfectly plastic materials and strain hardening elastic-plastic materials, and the effects of the yield stress and strain hardening index are explored. Our results show that due to the finite curvature of the indenter tip the hardness versus indentation depth curve rises or drops (depending on the material properties of the indented solids) as the indentation depth decreases, in qualitative agreement with experimental results. Surface asperities and dents of curvature comparable to that of the indenter tip can appreciably modify the hardness value at small indentation depth. Their effects would appear as random variation in hardness.

水菖蒲的化学成分研究和忍冬属植物的色谱分析

本论文由三章组成。第一章阐述了藏药水菖蒲的化学成分研究，共分离鉴定了39个化学成分，其中6个为新化合物。第二章报道了几种忍冬属植物的HPLC、HPLC-MS、GC分析以及抑菌活性、重金属含量测定结果。第三章概述了菖蒲属植物的研究进展。 第一章报道了水菖蒲(Acorus calamus L.)化学成分的分离纯化与结构鉴定。采用正、反相硅胶柱层析等分离方法，从水菖蒲的根中共分离出41个化合物，通过红外、质谱、核磁共振及X-ray单晶衍射等波谱方法和模拟计算方法鉴定了其中39个化合物的结构，主要为倍半萜、苯丙素、甾体类化合物。其中含有5个新的倍半萜类化合物和1系列新的甾体皂苷衍生物。经波谱分析将它们的结构鉴定为 1b, 7a(H)-cadinane-4a, 6a, 10a-triol (1), (2R,6R,7S,9S)-1(10), 4-cadinadiene-2, 9-diol (2), 1a, 5b-guaiane-10a-O-ethyl-4b, 6b-diol (7), 6b, 7b(H)-cadinane-1a, 4a, 10a-triol (13)，(1R,4R,6S,10R)-1-hydroxy-7(11)-cadinen-5, 8-dione (14)， 4′-O-正n碳酰基-3-O- β-D-葡萄糖基谷甾醇(n=14, 16, 18, 22) (15)。 第二章包括四个部分。第一部分报道了忍冬属三种植物40个样品的HPLC测定和对主要活性成分绿原酸的定量分析结果，以及运用HPLC-MS技术对色谱图中8个峰进行指认。在此基础上，考察了种植和采收多个因素对绿原酸含量的影响。第二部分报道了忍冬属三种植物27个样品的GC分析，根据样品的挥发性成分的保留时间对不同样品进行了定性比较，并考察了花期及海拔高度对植物挥发性成分的影响。第三、四部分分别阐述了灰毡毛忍冬和红腺忍冬的体外抑菌活性研究和重金属含量测定结果。 第三章全面系统地概述了菖蒲属植物的化学成分和药理活性研究进展。 This dissertation is composed by three chapters. The first chapter elaborates the phytochemical investigation of Acorus calamus L. Thirty-nine compounds including six new compounds were isolated and identified. The second chapter reports the research on genus Lonicera by HPLC, HPLC-MS and GC. Antifungal activity and heavy metals measurement of genus Lonicera were reported. The third chapter is a review about the research progress on the plant family of Acorus. The first chapter focuses on the isolation and identification of chemical constituents from Acorus calamus L.. Forty-one compounds were isolated from the root of Acorus calamus L. by repeat column chromatography over normal and reversed phase silica gel, the structure of thirty-nine compounds was identified by spectroscopic methods and computational methods, including IR, MS, NMR and X-ray. Those compounds mainly belonged to sesquiterpene, phenylpropanoid and steroid. Among them, five are new sesquiterpenes and one series are new steroid glycoside derivatives. Their structure were suggested as 1b, 7a(H)-cadinane-4a, 6a, 10a-triol (1), (2R,6R,7S,9S)-1(10), 4-cadinadiene-2, 9-diol (2), 1a, 5b-guaiane-10a-O-ethyl-4b, 6b- diol (7), 6b, 7b(H)-cadinane-1a, 4a, 10a-triol (13), (1R,4R,6S,10R)-1-hydroxy-7(11)- cadinen-5, 8-dione (14), 4′-O-carbonyl-3-O-β-D-glucosyl-sitosterol (carbonyl = tetradecanoyl, hexadecanoyl, octadecyl, docosanoyl) (15). The second chapter consists of four parts. The first part reports the HPLC analysis of forty samples of the genus Lonicera, and the quantitative investigation of chlorogenic acid in these samples by HPLC analysis. Relationship between the content of chlorogenic acid in different samples and their planting conditions and harvesting time were discussed. Furthermore, eight compounds were identified or tentatively characterized based on their mass spectra and UV spectra profiles. The second part is about qualitative analysis of the volatile constituent in twenty-seven samples of genus Lonicera by GC. The effect of planting altitude and harvesting time on the volatile constituent was also investigated. The third and fourth parts describe the antifungal activity and content of some kinds of heavy metals of L. macranthoides Hand.-Mazz. and L. hypoglauca Miq.. The third chaspter is a review about the research progress of the plant family of Acorus.

滇杨(Populus yunnanensis)对增强紫外辐射、干旱和喷施脱落酸的生态生理响应

目前，随着全球气候变化的加剧，水分短缺更加明显。在干旱与半干旱地区，水分胁迫是影响植物存活和生长的主要限制因子。同时，随着大气平流层中臭氧浓度的减少，过量的紫外辐射(UV-B)到达地球表面，一些地区的植物不可避免地受到增强UV-B 和水分胁迫的共同作用。文献表明在UV-B 增强的情况下，干旱表现为减弱或增强UV-B 对植物的影响，这与种、品种有一定的相关性。另外，脱落酸(ABA)是近年来研究报道最多的信息调控物质，与植物抗旱性途径有较大的关系，但其对植株抗UV-B 的影响还有待于研究。本论文以滇杨(Populus yunnanensis)为模式植物，从形态和生理方面研究了增强UV-B、干旱和脱落酸对它的影响，并探讨了UV-B 与干旱的互作效应以及喷施脱落酸对植株抗旱性和抗UV-B 能力的影响。主要研究结果如下：1. 增强的UV-B 和干旱胁迫都影响了滇杨的形态生长和生理生化反应。它们都导致了滇杨植株的株高、基茎、整株叶面积、平均叶面积、总生物量和净光合速率的显著降低，使得叶片增厚，过氧化物酶(GPX)活性升高，脯氨酸和花色素苷含量增加，膜脂过氧化程度增大。不同的是干旱显著降低了植株叶片数目，增大了根/冠比(Rs)、细根/总根比(Ft)、提高了内源ABA 含量、碳同位素(δ13C)以及紫外吸收物质含量和超氧化物歧化酶(SOD)的活性，而UV-B 对它们没有影响。干旱与UV-B 的复合作用加剧了任一单独胁迫对植株的抑制，表现为更小的株高、基茎、整株叶面积、平均叶面积、总生物量，更低的光合作用和更高的MDA 含量。而且UV-B 辐射降低了干旱胁迫下生物量分配的可塑性，表现为降低了干旱情况下的Rs 和Ft，ABA 的含量也显著下降，复合胁迫下脯氨酸含量和过氧化氢酶(CAT)的活性比任一单独胁迫时都要低。这些实验结果表明，增强的UV-B 与干旱的复合胁迫加剧了对植株的抑制作用。II2. 干旱情况下同时施加外源ABA 提高了植株的根/冠比、细根/总根比和单位面积叶重，即提高了干旱胁迫下植株对生物量分配的可塑性。而且外源ABA 使干旱胁迫下的长期用水效率、ABA 含量、脯氨酸含量、GPX 活性进一步增加，并有效调节了活性氧代谢的平衡，抑制了受旱植株MDA 的增加。结果表明，外源ABA 的喷施提高了滇杨植株的抗旱性。3. 在增强的UV-B 情况下，外源ABA 加剧了UV-B 对滇杨形态生长的抑制效果，表现为进一步降低了滇杨植株的整株叶面积、平均叶面积、单位面积叶重和总生物量，而且ABA 还降低了UV-B 胁迫下的净光合速率和脯氨酸的含量，增大了MDA 的含量。通过以上的数据我们可以看出，外源ABA 虽然提高了滇杨植株的抗旱性，但却加剧了UV-B 胁迫对植株的抑制作用。Currently, drought is one of the most serious environmental stresses. In arid and semi-aridregions, drought is a major constraint imposed on tree survival and growth. The decrease ofozone layer leads to a significant increase in ultraviolet-B (UV-B, 280-320 nm) radiationreaching the earth surface. In some places, plants suffer both UV-B and water stresssimultaneously. Their combination will increase or decrease the sensitivity of plants to UV-Bstress which lies on the species. On the other hand, abscisic acid (ABA), as a plant homoneand growth regulator, is better for plants resistant to drought stress, but it is uncleared aboutthe relationship between exogenous ABA and supplemental UV-B. In the present study, weemployed Populus yunnanensis Dode as a model species to characterize the growth andecophysiological responses of woody plants to supplemental UV-B, drought and exogenous ABA. The results are as follows:1. Both supplemental UV-B and drought affected the morphological, physiological andbiochemical responses of P. yunnanensis. They decreased the plant height, basal diameter,total leaf area, average leaf area, biomass and photosynthesis, and increased specific leaf mass,the activity of guaiacol peroxidase (GPX), the content of proline, anthocyanins andmalondialdehyde (MDA). However, drought decreased the leaf number and increasedroot/shoot ratio, fine root/total ratio, the activity of superoxide dimutase (SOD) and thecontents of ABA, carbon isotope composition (δ13C), UV-absorbing compounds. Whilesupplemental UV-B had no effects on them. The combination of drought and UV-Baugmented the growth inhibtion acting as further lower plant height and smaller basaldiameter, leaf area, biomass and higher MDA content. And compared with drought stress,root/shoot ratio and fine root/total root ratio decreased under the combination stresses. The photosynthesis, proline content and Catalase (CAT) activity became lower under combinationstresses than that of either stress lonely. According to these results, we suggested that,compared with the effect of stress lonely, the combination of supplemental UV-B and droughtdid not mitigate the harmful effect, but augmented it.2. Under drought conditions, exogenous ABA increased root/shoot ratio, fine root/total rootratio and the specific leaf mass. That was to say exogenous ABA increased plant plasticityunder drought conditions. Also ABA content, proline content, activity of GPX and δ13C wereenhanced further. In addition the enhancement of MDA was restrained. So the resultssuggested that exogenous ABA increased the seedling capacity of resistance to drought.3. Under supplemental UV-B conditions, exogenous ABA augmented the growth restrain ofUV-B to seedlings, which acted as further decreased leaf area, specific leaf mass and biomass.Compared with UV-B stress alone, proline content and photosynthesis were decreased andMDA content was increased under the combination of UV-B and ABA. These resultssuggested that although exogenous ABA increased the seedling capacity of resistance todrought, it augmented the growth restrain of supplemental UV-B to P. yunnanensis.

重离子径迹模板法电化学制备聚吡咯纳米线

采用蚀刻的聚碳酸酯(PC)离子径迹膜为模板,结合电化学沉积技术,制备出了直径为100~320 nm、长度从几μm到30μm的聚吡咯纳米线。利用场发射扫描电子显微镜(FESEM)、透射电子显微镜(TEM)对纳米线的形貌进行了表征。结果表明,所制备出的聚吡咯纳米线均呈圆柱形,且表面光滑、粗细一致。聚吡咯纳米线的紫外-可见(UV-Vis)光谱分析表明,随着聚吡咯纳米线直径增加,聚吡咯纳米线吸收峰展宽,且峰位向长波方向移动。

强流高电荷态全永磁ECR离子源LAPECR2的初步调试

研制成功了一台强流高电荷态全永磁ECR(Electron Cyclotron Resonance)离子源LAPECR2(Lanzhou All Permanent Magnet ECR Ion Source No.2)。该离子源在完成磁体装配后已成功在近代物理研究所320 kV高压平台上安装就位,与后束运线完成对接组装。离子源于2005年7月在14.5 GHz实现了第一次成功起弧,并引出较强的混合束流。目前离子源已与后束线以及部分实验终端完成了联调,在实验终端能够获得强流较高电荷态的离子束流。本文将着重论述该全永磁源的结构技术特点和主要参数指标。本文还着重论述了LAPECR2离子源在14.5 GHz微波功率馈入条件下的初步调试结果,在此基础上对束流向实验终端联调的实验结果进行了讨论,着重分析了影响束流引出与传输效率的主要因素。

离子注入/辐照引起Al_2O_3单晶的改性研究

600 K温度下用110 keV的He+,Ne+,Ar+离子注入及320 K温度下用230 MeV的208Pb27+辐照Al2O3单晶样品,研究了离子注入和辐照对Al2O3单晶样品结构和光学特性的影响。从测得的光致发光谱可以清楚地看到,所有样品在波长为375,413和450 nm处出现了强的发光峰,且所有5×1016ion/cm2注入样品的发光峰均最强。经过高能Pb辐照后的样品,在390 nm处出现了新的发光峰。透射电镜分析发现在注入氖样品100 nm入射深度以内形成了高浓度的小空洞(1—2 nm),在Ne沉积区域有少量大空洞形成。傅立叶变换红外光谱分析发现,波数在460—510 cm-1间的振动吸收带经过离子辐照后展宽,随着辐照量的增大,该振动吸收强度显著减弱。1 000—1 300 cm-1对应Al-O-Al桥氧伸缩振动模式的吸收带,辐照后向高波数方向移动。对离子注入和辐照对Al2O3单晶样品结构损伤机理进行了初步探讨。

改进的激光多步共振电离实验技术

描述了一套改进了的利用于激光多步共振电离谱学研究的实验装置和技术。在此技术中,利用加热蒸发的方式产生高温难熔元素的原子流;对激光功率和中性原子流进行实时监测,对测量结果作归一化处理;采用V-F变换器对堆积了的光信号和离子信号作瞬时变换,企图得到堆积的事件个数;CAMAC多道定标获取系统与其联合操作实现原子流强度、共振电离生成的离子数和激光功率等参数的同步获取。通过离线数据分析,能够得到更精确的实验数据。

高性能全永磁ECR离子源LAPECR2的研制

研制了一台体积和重量都较大、设计性能较高的全永磁电子回旋共振(Electron cyclotron resonance, ECR)离子源LAPECR2(Lanzhou all permanent magnetic ECR ion source No．2)。该离子源将用于中国科学院近代物理研究所320 kV高压平台,为其提供强流高电荷态离子束流。LAPECR2的研制采用全新的全永磁磁体结构设计,通过采用高性能的NdFeB永磁材料、优化的磁结构设计以及精确的计算,实测源体的磁场参数能达到高性能ECR离子源的设计要求。离子源采用较高频率的14．5 GHz微波馈入加热等离子体,波导直接馈入离子源以增强馈入微波的稳定性与效率。此外,还大量采用了一些有利于提高离子源高电荷态离子产额的关键技术,如铝内衬等离子体弧腔、负偏压盘、铝制等离子体电极、三电极引出系统、辅助掺气等。

双奇核~(172)Re高自旋态实验研究

利用149Sm(27Al,4nγ)172Re反应布居了形变双奇核172Re的高自旋态,用12套带有BGO反康普顿抑制的高纯锗探测器阵列进行了在束γ实验测量,首次建立了172Re由3个转动带构成的高自旋态能级纲图.研究和讨论了3个转动带的结构特征,基于已有的高自旋态核结构知识并通过系统学比较和分析指出它们的准粒子组态分别为πh11/2 νi13/2,πh9/2 νi13/2和 π1/2-[541] ν1/2-[521].发现前两个转动带在自旋小于18时其转动能级呈现反常的旋称劈裂.

30MeV/u~(40)Ar+~(112,124)Sn反应中态布居核温度的同位旋效应

用 13单元望远镜探测器阵列测量了 30MeV u40 Ar +112 ,12 4Sn反应中小角关联粒子 ,由两体符合事件提取了α α关联函数 .用三体弹道理论模型MENEKA计算本底关联函数 ,用Monte Carlo方法计算探测效率函数 ,在扣除本底产额并考虑探测效率的修正后 ,对不同同位旋反应系统 40 Ar +112 Sn和 40 Ar+12 4Sn提取的相对态布居核温度分别是 4 .18±0 .2 50 .2 1MeV和 4 .10±0 .2 20 .2 0 MeV ;考察态布居核温度和粒子能量的关系时 ,观察到两个系统的发射温度均随着粒子能量的增加而降低 ,缺中子系统40 Ar +112 Sn中由低能时的 5 .13±0 .3 00 .2 6MeV降低到高能时的 3.87±0 .3 70 .2 9MeV ,丰中子系统 40 Ar +12 4Sn中由低能时的 5 .39±0 .3 00 .2 6MeV降低到高能时的 3.32±0 .2 80 .2 3 MeV .用激发热核衰变过程的同位旋选择性对这种同位旋相关性进行了解释

氩离子注入模拟太阳风对月岩的作用

对玄武岩和斜长岩等多种岩石样品进行了低能、超高剂量氩离子注入。氩离子能量12 0keV ,注入剂量 5× 10 18 cm2 。用X射线荧光光谱仪分析了辐照样品和未辐照样品的表面元素组成 ;用分步加热法分析了注入气体释放模式及岩石对氩气的保留能力。初步探讨了岩石对氩气的保留能力和分步加热释气模式等问题

中能重离子碰撞中的碰撞参数研究

在入射能量Ｅ为４０和１００ＭｅＶ／ｕ时，对~(１１２)Ｓｎ＋~(１１２)Ｓｎ和~(１２４)Ｓｎ＋~(１２４)Ｓｎ两个反应系统在不同碰撞参数下进行了同位旋相关的量子分子动力学模型计算，系统研究了阻塞率、线性动量转移、荷电粒子多重性、轻荷电粒子多重性、中子多重性以及束缚核总电荷Ｚ_(ｂｏｕｎｄ)随碰撞参数的变化规律，结果表明，中子多重性对碰撞参数的依赖在两个能量下都存在着明显的同位旋效应，Ｚ_(ｂｏｕｎｄ)在Ｅ为４０ＭｅＶ／ｕ时存在着同位旋效应．同时讨论了在较低和较高能量时如何更合理地确定反应事件的碰撞参数．