Sputtering induced by highly charged Pb-208(q+) bombardment on Al surface

Highly charged ions (HCls) carrying high Coulomb potential energy (E-p) could cause great changes in the physical and chemical properties of material surface when they bombard on the solid surface. In our work, the secondary ion yield dependence on highly charged Pbq+ (q = 4-36) bombardment on Al surface has been investigated. Aluminum films (99.99%) covered with a natural oxide film was chosen as our target and the kinetic energy (E-k) was varied between 80 keV and 400 keV. The yield with different incident angles could be described well by the equation developed by us. The equation consists of two parts due to the kinetic sputtering and potential sputtering. The physical interpretations of the coefficients in the said equation are discussed. Also the results on the kinetic sputtering produced by the nuclear energy loss on target Surface are presented.

Study of the interaction of highly charged ions with SiO2 surface

Highly charged ions (HCIs) AO(q+)/Pbq+ are extracted from ECR source and impacted on solid surface Of SiO2 Sputtering yield as a function of incident angle is measured by multi-channel plate (MCP). The results have been fitted by a new formula. We proposed the cooperation model to explain the formula. The results demonstrate that the potential assisted kinetic sputtering yield increases with the charge state and potential sputtering (PS) could be induced by impact of HCIs. At larger incident angles, the sputtering yield is dominated by elastic collision between HCIs and material atoms. It is found that, smaller the incident angle, larger the contribution from the potential sputtering. (C) 2009 Elsevier B.V. All rights reserved.

X-ray spectra induced in highly charged Ar-40(q+) interacting with Au surface

By use of optical spectrum technology, the spectra of X-ray induced by highly charged Ar-40(q+) ions interacting with Au surface have been studied. The results show that the argon K alpha X-ray were emitted from the hollow atoms formed below the surface. There is a process of multi-electron exciting in neutralization of the Ar16+ ion, with electronic configuration 1s(2) in its ground state below the solid surface. The yield of the projectile K alpha X-ray is related to its initial electronic configuration, and the yield of the target X-ray is related to the projectile kinetic energy.

阿佛曼链霉菌的~(12)C离子辐照效应及高产菌株选育；Research on Mutation Breeding of High-producing Strains from Streptomyces Avermitilis Irradiated by Ion Beam of ~(12)C~(6+)

选用12C6+离子辐照诱变阿维菌素B1a产生菌ZJAV-A1,研究其诱变效应。实验结果表明,12C6+离子辐照剂量50Gy时致死率97%,正突变率最高可达到34.2%。通过12C6+离子诱变处理,结合平板培养基及斜面培养基的正突变菌株筛选,最终获得一株稳定性良好,阿维菌素B1a组分产量稳定在4460—4588μg/ml之间,较出发菌株提高11.1%—14.7%的突变株ZJAV-Y1-203。

Synthesis of substituted pyridyl ureas by selenium dioxide-catalyzed carbonylation

A series of commercially useful substituted pyridyl ureas have been synthesized via selenium dioxide-catalyzed reductive carbortylation of substituted nitrobenzene or substituted nitropyridine with amine as co-reagent and carbon monoxide as carbonyl reagent instead of phosgene in one-pot reaction. The recycling reusability of catalyst was also tested. It was also found that selenium dioxide-catalyzed reductive carbonylation of nitroaromatics exhibited reaction-controlled phase-transfer phenomena of the catalyst. (C) 2003 Elsevier B.V. All rights reserved.

Low-temperature heat capacity and thermodynamic properties of crystalline carboxin (C12H13NO2S)

Carboxin was synthesized and its heat capacities were measured with an automated adiabatic calorimeter over the temperature range from 79 to 380K. The melting point, molar enthalpy (Delta(fus)H(m)) and entropy (Delta(fus)S(m)) of fusion of this compound were determined to be 365.29 +/- 0.06K, 28.193 +/- 0.09 kJ mol(-1) and 77.180 +/- 0.02 J mol(-1) K-1, respectively. The purity of the compound was determined to be 99.55 mol% by using the fractional melting technique. The thermodynamic functions relative to the reference temperature (298.15 K) were calculated based on the heat capacity measurements in the temperature range between 80 and 360 K. The thermal stability of the compound was further investigated by differential scanning calorimetry (DSC) and thermogravimetric (TG) analysis. The DSC curve indicates that the sample starts to decompose at ca. 290degreesC with the peak temperature at 292.7degreesC. The TG-DTG results demonstrate the maximum mass loss rate occurs at 293degreesC corresponding to the maximum decomposition rate. (C) 2003 Elsevier B.V All rights reserved.

长白山温带混交林林冠下层CO_2通量对生态系统碳收支的贡献

作为ChinaFLUX的重要组成部分,从2002年年底开始利用涡度协方差技术在长白山温带混交林林冠上层和下层进行连续通量观测,这为量化林冠下层CO2通量对整个森林生态系统碳收支的贡献提供了一条有效途径。利用2003年林冠上层和林冠下层的观测数据,研究表明林冠下层夜间的CO2通量与5 cm深度的土壤温度存在明显的指数正相关关系。林冠下层的呼吸通量与箱式法观测的土壤呼吸通量之间具有很好的一致性(R2=0.77),二者在全年都与整个森林的光合产物量相耦合,且都在7~8月份达到最大值。林冠下层的呼吸量和土壤呼吸量分别为770 g Cm-2a-1和703 g Cm-2a-1,占整个森林生态系统呼吸年总量的比重高达59.88%和54.69%。林冠下层的光合作用呈双峰型季节变化,两个峰值分别出现在5月中旬和8月下旬。尽管全年林冠下层光合产物量为87 g Cm-2a-1,对整个森林光合产物量的贡献率仅为5.69%,但林冠郁闭度低的4、5月和10月份,林冠下层的光合产物贡献率也分别达到19.99%、21.06%和14.53%。林冠下层净初级生产力的季节动态受该层呼吸作用的季节变异控制,林冠下层在全年都表现为碳源,其净碳排放速率在8月份达到最大。

稠油降解菌的筛选及其对胶质和沥青质生物降解

以稠油为唯一碳源,从辽河油田石油污染土壤、渣油中,经富集培养,分离筛选出细菌菌株11株、真菌23株和放线菌10株。将在含油培养基上长势良好的菌株进行室内摇瓶实验,发现真菌的降解效果好于细菌,F2006的降解效果最好,14d去除率达到39.8%。在胶质和沥青质污染土壤中,观察真菌F4、F2008、F9902、F2006、F2017、F6和F9904在14d、28d和42d对胶质和沥青质的去除率,测试结果表明,菌株F2006和F2008降解效果较好,在42d时去除率分别达到55.73%和57.62%。两次实验说明,菌株F2006为降解胶质和沥青质的优势菌株,在生物修复中具有较好的应用前景。

处理含多环芳烃植物油的吸附剂筛选及其性能评价

为循环利用植物油淋洗修复多环芳烃污染土壤,应用吸附过程去除植物油中的多环芳烃.对10种吸附剂进行吸附柱和批处理筛选实验,评价了这些吸附剂的物理化学性质,从中筛选出最适合的吸附剂.动态吸附柱筛选实验表明,植物油中的多环芳烃在活性炭F400及F300上的吸附量最高,分别为55.39μg.g-1和23.82μg.g-1,说明吸附剂的粒径对吸附效果有重要影响,而多环芳烃在其他几种吸附剂上几乎没有吸附.批处理筛选实验表明,多环芳烃在两种活性炭上的吸附量仍然最多,分别为211.85μg.g-1和203.79μg.g-1.

Identifying the isolated transition metal ions/oxides in molecular sieves and on oxide supports by UV resonance Raman spectroscopy

Isolated transition metal ions/oxides in molecular sieves and on surfaces are a class of active sites for selective oxidation of hydrocarbons. Identifying the active sites and their coordination structure is vital to understanding their essential role played in catalysis and designing and synthesizing more active and selective catalysts. The isolated transition metal ions in the framework of molecular sieves (e.g., TS-1, Fe-ZSM-5, and V-MCM-41) or on the surface of oxides (e.g., MoO3/Al2O3 and TiO2/SiO2) were successfully identified by UV resonance Raman spectroscopy. The charge transfer transitions between the transition metal ions and the oxygen anions are excited by a UV laser and consequently the UV resonance Raman effect greatly enhances the Raman signals of the isolated transition metal ions. The local coordination of these ions in the rigid framework of molecular sieves or in the relatively flexible structure on the surface can also be differentiated by the shifts of the resonance Raman bands. The relative concentration of the isolated transition metal ion/oxides could be estimated by the intensity ratio of Raman bands. This study demonstrates that the UV resonance Raman spectroscopy is a general technique that can be widely applied to the in-situ characterization of catalyst synthesis and catalytic reactions. (C) 2003 Elsevier Science (USA). All rights reserved.