Flame Propagation of H_2-Air in a Semi-Open Obstructed Tube

针对氢／空气混合物,通过实验研究了其预混火焰在半开口管道中的火焰传播加速现象,结果表明,火焰传播状态随着氢气当量比的变化而发生改变。当氢／空气混合物被点燃后,由于障碍物的扰动,火焰在管道中不断加速传播,并最终到达一准稳态传播。在氢气当量比0.31附近时,火焰速度发生跃变。当氢气当量比足够大时,火焰传播由爆燃态转变为爆轰态。在本实验条件下,爆燃转准爆轰的临界条件是d/Lambda>=2.6（d是圆环形障碍物内径,人是爆轰格胞尺度）。障碍物阻塞比的变化对最大火焰速度和压力提升的影响不明显。

Influence of open-tube Ga diffusion on the characteristics for thyristor

Open-tube Ga diffusion into a SiO2/Si structure was used for fabrication of the high speed thyristor. The advantages of open-tube Ga diffusion are as follows; it is easier to operate and easier to control the profile of the Ga concentration during processing, a clean surface, which is free from alloy spots can be obtained, this technique ensures to improve the on-state characteristics and dynamic characteristics.

Influence of Obstacle-Produced Turbulence on Development of Premixed Flames

An investigation into influence of obstructions on premixed flame propagation has been carried out in a semi-open tube. It is found that there exists flame acceleration and rising overpressure along the path of flame due to obstacles. According to the magnitude of flame speeds, the propagation of flame in the tube can be classified into three regimes: the quenching, the choking and the detonation regimes. In premixed flames near the flammability limits, the flame is observed first to accelerate and then to quench itself after propagating past a certain number of obstacles. In the choking regime, the maximum flame speeds are somewhat below the combustion product sound speeds, and insensitive to the blockage ratio. In the more sensitive mixtures, the transition to detonation (DDT) occurs when the equivalence ratio increases. The transition is not observed for the less sensitive mixtures. The dependence of overpressure on blockage ratio is not monotonous. Furthermore, a numerical study of flame acceleration and overpressure with the unsteady compressible flow model is performed, and the agreement between the simulation and measurements is good.

障碍物扰动对半开口管道中火焰传播特性的影响

自从1926年Chanman和Wheeler率先开创有障碍物管道中的火焰传播研究工作以来，管道中障碍物扰动引起的火焰加速现象引起了广泛的关注。由于这类现象在燃烧科学上的学术意义及其在生产中诸如安全问题等方面的实际意义，人们相继进行了一系列的研究工作。归纳起来，可以分为两大类：1）封闭管道的火焰传播。人们在不同形状的管道或容器中研究了障碍物对火焰加速的影响，在理论分析和数值计算方面也作了一些有益的工作；2）开口管道的火焰传播。相对于闭口管道，开口管道中的火焰传播研究则逊色得多。这方面尚缺乏系统的实验数据，理论方面的分析也欠缺得多。但当前在实际中，并不乏开口体系的应用，如，现已广泛应用于电力系统的一种燃气除灰装置，是一燃烧气体燃料的半开口系统。因此，研究半开口管道中非稳态燃烧的加速机制具有重要意义。在本论文工作中，通过大量的实验研究，比较系统地研究了障碍物的扰动对预混火焰传播特性的影响。实验在一长L=5m、内径D＝80mm的一端封闭、一端开口的火焰传播管内进行，管内均匀布置障碍物，通过改变障碍物的形状、间距、阻塞比大小，同时选用五种不同的可燃气体，探索了障碍物结构对预混湍流火焰加速和管内压力上升的影响。实验表明，对于敏感气体如氢气和乙炔，由于障碍物扰动产生的影响，火焰不断加速，并最终达到一准稳定状态；在适当的条件下，火焰传播状态可由爆燃向爆轰转变，此时火焰速度发生跃变；而对干不敏感气体如甲烷，则爆燃转爆轰现象不容易发生。在不同的火焰传播状态，障碍物结构特性对火焰速度和压力产生的影响各不相同。在缓燃态，随着阻塞比的变化，最大火焰速度先上升后下降，在BR=0.3～0.4之间存在一最大值；在銮塞态，最大火焰速度受阻塞比变化的影响不明显，略低于燃烧产物的声速；在阻塞比BR＝0.5附近，压力达到最大值。而在爆轰态，随着阻塞比的增加，最大火焰速度和压力逐渐降低，爆燃转爆轰的浓度范围变小。由于在有障碍物的管道中，火焰速度很容易达到声速（变塞态）或超声速（爆轰态），必须考虑流体的马赫数效应。本文在前人研究成果的基础上，给出了湍流马赫数修正的可压缩性两方程湍流模型，模拟了半开口狭长管道中重复布置的障碍物引起的湍流火焰加速现象。最大火焰速度和管内压力的计算结果与实验测量值吻合良好，这表明用修正后的湍流模型能够比较真实地模拟障碍物管内预混火焰的发展过程。通过对管道内障碍物扰动引起的燃烧波加速的机理和技术研究，对流场扰动对燃烧波产生和发展的影响规律有了比较全面的了解，研究结果对气脉冲除灰技术的完善具有直接的指导意义。

氢/空气火焰在半开口有障碍管道中的传播特性

针对氢/空气混合物，通过实验研究了其预混火焰在半开口管道中的火焰传播加速现象。结果表明，火焰传播状态随着氢气当量比的变化而发生改变。当氢/空气混合物被点燃后，由于障碍物的扰动，火焰在管道中不断加速传播，并最终到一准稳态传播。在氢气当量比0.34附近时，火焰速度发生跃变。当氢气当量比足够大时，火焰传播由爆燃态转变为爆轰态。在本实验条件下，爆燃转准爆轰的临界条件是d/λ ≥ 2.6（d是圆环形障碍物内径，λ是爆轰格胞尺度）。障碍物阻塞比的变化对最大火焰速度和压力提升的影响不明显。

Numerical and Experimental Investigation On The Prevention of Co Deflagration

The exhaust gases from industrial furnaces contain a huge amount of heat and chemical enthalpy. However, it is hard to recover this energy since exhaust gases invariably contain combustible components such as carbon monoxide (CC). If the CO is unexpectedly ignited during the heat recovery process, deflagration or even detonation could occur, with serious consequences such as complete destruction of the equipment. In order to safely utilize the heat energy contained in exhaust gas, danger of its explosion must be fully avoided. The mechanism of gas deflagration and its prevention must therefore be studied. In this paper, we describe a numerical and experimental investigation of the deflagration process in a semi-opened tube. The results show that, upon ignition, a low-pressure wave initially spreads within the tube and then deflagration begins. For the purpose of preventing deflagration, an appropriate amount of nitrogen was injected into the tube at a fixed position. Both simulation and experimental results have shown that the injection of inert gas can successfully interrupt the deflagration process. The peak value of the deflagration pressure can thereby be reduced by around 50%. (C) 2008 Elsevier Ltd. All rights reserved.

中国企业员工组织承诺研究

The research objectives were to investigate the psychological structure of employees' organizational commitments(OCs), and its antecedents, and to examine the relative effects of employees' OCs to their performances. In order to deeply uncover the nature of OCs, some standard methods, such as in-depth interview, focus-group, semi-open questionnaire, standard questionnaire etc., were employed. In data analysis, not only some common statistical methods, such as multivariate analysis of variance, cross-table analysis, factor analysis, but also some forefront ones, such as confirmatory factor analysis and path analysis of SEM, were used. The paper covers six chapters: 1) In the first chapter, Firstly some previous empirical studies, which examined structures, antecedents, correlates, and/or consequences of organizational commitment in China and Western countries, were summarized. This summary covers most of the respectable researchers' works of this field, such as H.S.Becker, B.Buchanan, L.W.Porter, G. Ritzer, H.M.Trice, J.A.Alutto, L.G.Hrebiniak, R.T.Mowday, J.P.Meyer, N.J.Allen, G.W.McGee, R.C.Ford, R.Eisenberger, etc. Then three theoretical hypothesis were put forward as following: ① In China, OCs should be multidimensional psychological structures, which means there should exist more than one type of OCs; ② There should be some different antecedents to different OCs; ③ Employees with different types of OC should perform differently in their works. Finally the theoretical and practical significance were discussed. 2) In the second chapter, great efforts were made to investigate the OC types. Firstly, in-depth interview with managers and employees, semi-open questionnaire, and some other methods were used in the pilot research to gather much qualitative material. Then OC questionnaire was designed to get quantitative data in about 20 enterprises, including state-owned, collective-owned, wholly foreign-funded, and joint-ventures. During revising of this questionnaire, there were about 5000 samples surveyed. after factor analysis, the data shows that there should be 5 types of OCs in China, which were respectively named as Affective Commitment, Normative commitment, Ideal Commitment, Economic Commitment, Choice Commitment. Thirdly, confirmatory factor analysis method was used to successfully confirm this 5-factor model. Finally, Cronbach a and test-retest correlate indicate that this questionnaire is reliable. Since factor analysis result has show its construct validity, a simple criterion-related validity research was conducted. 3) In order to investigate the correlation between different OC and employee performance and different antecedents of OC, 5 other questionnaires, such as Employee Satisfaction Questionnaire, Perceived Organizational Support Questionnaire, Social Exchange Questionnaire, Altruism Scale, and Leader Confidence Scale were revised in the third chapter. 4)In the fourth chapter, a lot of correlates, cross-table analysis were conducted to show the correlation between different OCs and 10 performances, which indicate employees with different OCs will show different performance in 10 variables, such as altruism, etc. 5) In the fifth chapter, correlate analysis, multivariate of analysis, and path analysis of SEM were used to investigate the antecedents of OC. A satisfactory model showing the correlation between OC and their antecedents was confirmed. 6) In the last chapter, all researches about OC, and its limitations were summarized.

保险推销员自我效能感及其工作模型

The research studied self-efficacy and job mechanism of insurance salesmen in China by the methods of in-depth interview, focus-group, semi-open questionnaire, standard questionnaire. There were about 1300 samples surveyed. The way of data analysis such as factor analysis, correlation analysis, regreesion analysis and structure equation was used. Four following conclusions were drawn: First, self-efficacy of inssurance salesmen in China consists of eight factorswhich are interview skills, manner, persistence, control of emotion, plans and comments, master of knowledge, intuition and judgement, preparation. Second, the relationship between self-efficacy and other job variables such as achievement motivation, work incentive, coping strategy, view of ability, performance, goalsetting, colleague relationship, the way of feedback from leader, job satisfaction and exertion were tested and all the correlations were significant. Third, regression analysis was used to test the relationship between self-efficacy and the antecedent variables. The result was that four antecedent varialbes enter equation (p<.05). They are self-oriented achievement motivation, stability of emotion, performance and colleague relationship.. Finally, vertified by path-analysis, the research posits a comprehensive model about job for insurance salesmen, in which self-efficacy was the most important factor. On the one hand, self-efficacy has dominant effects on the consequent variables, such as mastery goal, performance- approach goal, job satisfaction, exertion, coping strategy, on the another hand, self-efficacy was found as mediator of the relationship between the antecedent variables and consequent variables.

The Interaction Between Shock Waves and Foam in a Shock Tube

An experimental study and a numerical simulation were conducted to investigate the mechanical and thermodynamic processes involved in the interaction between shock waves and low density foam. The experiment was done in a stainless shock tube (80mm in inner diameter, 10mm in wall thickness and 5360mm in length). The velocities of the incident and reflected compression waves in the foam were measured by using piezo-ceramic pressure sensors. The end-wall peak pressure behind the reflected wave in the foam was measured by using a crystal piezoelectric sensor. It is suggested that the high end-wall pressure may be caused by a rapid contact between the foam and the end-wall surface. Both open-cell and closed-cell foams with different length and density were tested. Through comparing the numerical and experimental end-wall pressure, the permeability coefficients a and 0 are quantitatively determined.

Wave dynamic processes induced by a supersonic projectile discharging from a shock tube

A numerical study on wave dynamic processes occurring in muzzle blast flows, which are created by a supersonic projectile released from the open-end of a shock tube into ambient air, is described in this paper. The Euler equations, assuming axisymmetric flows, are solved by using a dispersion-controlled scheme implemented with moving boundary conditions. Three test cases are simulated for examining friction effects on the muzzle flow. From numerical simulations, the wave dynamic processes, including two blast waves, two jet flows, the bow shock wave and their interactions in the muzzle blasts, are demonstrated and discussed in detail. The study shows that the major wave dynamic processes developing in the muzzle flow remain similar when the friction varies, but some wave processes, such as shock-shock interactions, shock-jet interactions and the contact surface instability, get more intensive, which result in more complex muzzle blast flows.

Diffusive Wave Solutions for Open Channel Flows with Uniform and Concentrated Lateral Inflow

The diffusive wave equation with inhomogeneous terms representing hydraulics with uniform or concentrated lateral inflow intoa river is theoretically investigated in the current paper. All the solutions have been systematically expressed in a unified form interms of response function or so called K-function. The integration of K-function obtained by using Laplace transform becomesS-function, which is examined in detail to improve the understanding of flood routing characters. The backwater effects usuallyresulting in the discharge reductions and water surface elevations upstream due to both the downstream boundary and lateral infloware analyzed. With a pulse discharge in upstream boundary inflow, downstream boundary outflow and lateral inflow respectively,hydrographs of a channel are routed by using the S-functions. Moreover, the comparisons of hydrographs in infinite, semi-infiniteand finite channels are pursued to exhibit the different backwater effects due to a concentrated lateral inflow for various channeltypes.

The Characteristics of Semi-Cokes --The Solid Residues from Coal Partial Gasification

In this paper the proximate analysis and ultimate analysis of sulfur in different semi-cokes generated from Rizhao bituminous coal and Beijing anthracite under different temperatures is done. Also the tendency of the contents of volatile, ash, fixed carbon and sulfur in different semi-cokes along with the different preparation temperatures is studied. Then the combustion experiment of semi-cokes in the drop-tube furnace system was carried out, and the kinetic parameters of different semi-cokes ware calculated.

Quantum transport from the perspective of quantum open systems

By viewing the non-equilibrium transport setup as a quantum open system, we propose a reduced-density-matrix based quantum transport formalism. At the level of self-consistent Born approximation, it can precisely account for the correlation between tunneling and the system internal many-body interaction, leading to certain novel behavior such as the non-equilibrium Kondo effect. It also opens a new way to construct time-dependent density functional theory for transport through large-scale complex systems. (c) 2006 Elsevier B.V. All rights reserved.

Shock Tube Studies on Recombination Kinetics of Sodium Ion with Electron

The ionization kinetics of sodium diluted in argon is studied in a shock tube, in which the test gas mixture is ionized by a reflected shock wave and subsequently quenched by a strong rarefaction wave. A Langmuir electrostatic probe is used to monitor the variation of the ion number density at the reflection shock wave region. The working state of the probe is in the near fi-ee fall region and a correction for reduction of the probe current due to elastic scattering in the probe sheath is introduced. At the temperature range of 800 to 2600 K and in the ambience of argon gas, the three-body recombination rate coefficient of the sodium ion with electron is determined: 3.43 x 10(-14)T(-3.77) cm(6).s(-1).

Influence of the Configuration of Obstacles on Premixed Flame Acceleration in a Tube

在一端封闭、一端开口的火焰传播管中均匀布置障碍物,研究了障碍物结构对管道中预混火焰传播的影 响。结果表明,由于障碍物的扰动,火焰不断加速,在阻塞比相同的条件下,最终的火焰稳态速度与障碍物的形状 和间距基本无关,其中障碍物间距仅仅影响火焰的加速速率,在障碍物间距约等于火焰传播管内径( W/ D≈1. 0) 时,平均火焰速度达到最大值,火焰到达稳态传播的距离最短。同时,本文用一维简化模型模拟了火焰在障碍物管 道中的加速过程,计算结果与实验测试结果在定性上比较吻合,说明在管内火焰速度较低的情况下,用一维可压缩 流动近似处理能初步揭示管内火焰的加速机制。