103 resultados para 422
Resumo:
对再入飞行器等离子体尾迹及其雷达散射特性进行了分析、研究和大量的计算.讨论了物形、流场各因素对尾迹雷达散射截面的影响.流场计算使用准一维粘性尾迹方程,以修正基尔方法(多值法)求解,用一阶Born近似完成亚密雷达散射截面(RCS)计算.给出了研究结果.、
Resumo:
<正> 一、引言 对振动弛豫方程,自1936年以来已作过广泛的研究,并在分析弛豫实验数据和研究包含弛豫过程的物理、力学现象中,得到广泛的应用。 文献中对包含简并振型的弛豫方程的使用,一直存在着含混之处。如文献[4,6,7]都在弛豫项前未加说明地引入了一些系数,这是无法理解的。又有不少人采用的是近似的甚至是包含着错误的弛豫方程。这都会对包括弛豫过程的一些物理、力学问题的理论分析带来显著的影响,并且会在处理和使用弛豫数据时造成混乱。
Resumo:
<正> 其中r为距离,k=2π/波长,c为波的傳播速度,t为时間,i=-1~(1/2).则可根据基尔霍夫公式把求任一点P的扰动的問題化为一个求面积分的問題。后来玛吉(Maggi),柯特勸(Kottler)等人又証明可把这面积分化为一个线积分,于是P点的扰动u为:
Resumo:
are obtained by using implicit four-point and six-point schemes. The results from
Resumo:
在载流薄板的磁弹性非线性运动方程、物理方程、几何方程、洛仑兹力表达式及电动力学方程的基础上,导出四边简支载流矩形薄板在电磁场与机械载荷共同作用下的磁弹性动力屈曲方程。应用Galerkin原理将该屈曲方程整理为Mathieu方程的标准形式,并利用Mathieu方程解的稳定区域与非稳定区域的分界,即方程系数的本征值关系,得出磁弹性问题屈曲临界状态的判别方程。通过具体算例,给出四边简支矩形板的磁弹性动力屈曲方程以及屈曲临界状态与相关参量之间的关系曲线,并对计算结果及其变化规律进行分析讨论。
Resumo:
本文实验研究了微重力条件下的准稳态核态池沸腾现象中的气泡动力学特征及其对传热特性的影响,发现在低过冷度沸腾中,聚合汽泡表面的强烈振荡促进了整个加热面上的核化过程与核态沸腾传热;而高过冷沸腾中,聚合气泡在表面张力作用下呈球状,难以覆盖整个加热表面,导致核态沸腾向膜态沸腾的过度过程表现为"核态沸腾+局部的干斑扩展"现象,相应的传热曲线没有明显转折.微重力条件下池沸腾临界热流随过冷度和压力的增加而升高,与地面结果定性相符.
Resumo:
本文研究了压缩真空中无相互作用双原子的纠缠动力学特性。通过分析不同初始纠缠态的演化,发现压缩真空中纠缠原子失去纠缠的速度比在普通真空中更快,并且压缩越大纠缠衰减越快。可以用concurrence和可分性“距离”Lambda的时间演化来解释这种不同寻常的纠缠突然消失现象。
Resumo:
The electro-optic effect in uniaxial crystals for light propagating near the optic axis with any polarization has been analyzed. The passive and the electrically induced birefringences and the rotation of polarization direction in crystals have been calculated, and the conoscopic interference figures under orthogonal polariscopes for different polarizer directions have been plotted. The extinction areas caused by the rotation of polarization direction in crystals change with the polarizer direction, but the two heads of the induced optical axes do not vary, which are always on the induced principal axis with bigger refractive index. The directions of polariscopes are always extinction, and the +/- 45 degrees directions with polarizer are always complete transmission. The conoscopic interference figures for LiNbO3 crystals have been demonstrated experimentally by rotating polariscopes directions, which accord with the theoretically calculating plots. (c) 2006 Elsevier GmbH. All rights reserved.
Resumo:
We demonstrate a full-range parallel Fourier-domain optical coherence tomography (FD-OCT) in which a tomogram free of mirror images as well as DC and autocorrelation terms is obtained in parallel. The phase and amplitude of two-dimensional spectral interferograms are accurately detected by using sinusoidal phase-modulating interferometry and a two-dimensional CCD camera, which allows for the reconstruction of two-dimensional complex spectral interferograms. By line-by-line inverse Fourier transformation of the two-dimensional complex spectral interferogram, a full-range parallel FD-OCT is realized. Tomographic images of two separated glass coverslips obtained with our method are presented as a proof-of-principle experiment.
Resumo:
提出一种可提高平行平板角位移干涉测量仪测量精度的优化设计方法。对角位移干涉测量系统进行了误差分析,讨论了影响角位移测量精度的主要因素。分析了在干涉仪光路中入射到平行平板上的初始入射角度、平行平板的折射率以及厚度等参数的选取对角位移测量精度的影响。结果表明,优化选取最佳的初始入射角度以及元件参数,并在干涉光路中附加引入一平面反射镜形成光程差放大系统,可实现的角位移测量精度达10-8 rad数量级。
Resumo:
在“神光-Ⅱ”装置上进行先进高能多功能激光束系统(简称第九路)研制工程中,由于在原ICF靶室上又增加了输入“汤姆逊探针光”和“X光背光照明探针光”的锥形真空套筒及其终端光学元件,导致原有靶室结构的变化,可能会引入新的不稳定因素.通过有限元分析方法,建立有限元分析模型,进行优化设计.通过位移传感器测量结果可知,第九路终端光学元件径向窜动所引起的打靶误差最大值为2.110 μm,小于“神光-Ⅱ”靶场终端光学系统的最大允许误差值7.785 μm.
Resumo:
从波动理论出发,对锥形光纤的纵向传播常数进行泰勒(Taylor)级数展开,经近似得到了锥形光纤功率分布的解。基于此理论,对锥形光纤的功率分布特性进行了讨论,并分析了锥形光纤的长度、锥度和光纤折射率等参数对锥形光纤不同模式功率分布的影响。为了减小功率泄漏,当光从锥形光纤大端入射时,应当减小锥长,减小锥度,增大纤芯包层折射率差;当光从锥形光纤小端入射时,应当增加锥长,增加锥度,增大纤芯包层折射率差。在长锥长、大锥度情况下,光纤折射率分布的影响相对较小。
Resumo:
研究了掺铒TeO2-ZnO-PbCl2碲酸盐基氧卤玻璃在977nm激光二极管抽运下的发光和上转换发光特性,结果发现除红外1.53μm^4I13.2→^4I15/2发光外(荧光半高宽高达69nm),该玻璃还存在很强的^2H11/2→^4I15/2(527nm),^4S3/2→^4I15/2(549nm)和^4R9/2→^4I15/2(666nm)可见上转换发光.应用Judd-Ofelt理论计算得到玻璃强度参数Ω1(t=2,4,6)分别为Ω2=5.87×10^20cm^2,Ω4=2.08×10^2-cm^2,
Resumo:
Sol-gel derived TiO2/SiO2/ormosil hybrid planar waveguides have been deposited on soda-lime glass slides and silicon substrates, films were heat treated at 150 degreesC for 2 h or dried at room temperature. Different amounts of water were added to sols to study their impacts on microstructures and optical properties of films. The samples were characterized by m-line spectroscopy, Fourier transform infrared spectroscopy (FT-IR), UV/VIS/NIR spectrophotometer (UV-vis), atomic force microscopy (AFM), thermal analysis instrument and scattering-detection method. The refractive index was found to have the largest value at the molar ratio H2O/OR = 1 in sol (OR means -OCH3, -OC2H5 and -OC4H9 in the sol), whereas the thickest film appears at H2O/OR = 1/2. The rms surface roughness of all the films is lower than 1.1 nm, and increases with the increase of water content in sol. Higher water content leads to higher attenuation of film. (C) 2004 Elsevier B.V. All rights reserved.