The cross layer RMPA handover: a reliable mobility pattern aware handover strategy for broadband wireless communication in a high-speed railway domain

Enhancing the handover process in broadband wireless communication deployment has traditionally motivated many research initiatives. In a high-speed railway domain, the challenge is even greater. Owing to the long distances covered, the mobile node gets involved in a compulsory sequence of handover processes. Consequently, poor performance during the execution of these handover processes significantly degrades the global end-to-end performance. This article proposes a new handover strategy for the railway domain: the RMPA handover, a Reliable Mobility Pattern Aware IEEE 802.16 handover strategy "customized" for a high-speed mobility scenario. The stringent high mobility feature is balanced with three other positive features in a high-speed context: mobility pattern awareness, different sources for location discovery techniques, and a previously known traffic data profile. To the best of the authors' knowledge, there is no IEEE 802.16 handover scheme that simultaneously covers the optimization of the handover process itself and the efficient timing of the handover process. Our strategy covers both areas of research while providing a cost-effective and standards-based solution. To schedule the handover process efficiently, the RMPA strategy makes use of a context aware handover policy; that is, a handover policy based on the mobile node mobility pattern, the time required to perform the handover, the neighboring network conditions, the data traffic profile, the received power signal, and current location and speed information of the train. Our proposal merges all these variables in a cross layer interaction in the handover policy engine. It also enhances the handover process itself by establishing the values for the set of handover configuration parameters and mechanisms of the handover process. RMPA is a cost-effective strategy because compatibility with standards-based equipment is guaranteed. The major contributions of the RMPA handover are in areas that have been left open to the handover designer's discretion. Our simulation analysis validates the RMPA handover decision rules and design choices. Our results supporting a high-demand video application in the uplink stream show a significant improvement in the end-to-end quality of service parameters, including end-to-end delay (22%) and jitter (80%), when compared with a policy based on signal-to-noise-ratio information.

Eurobalise-Train communication modelling to assess interferences in railway control signalling systems

The evolution of the railway sector depends, to a great extent, on the deployment of advanced railway signalling systems. These signalling systems are based on communication architectures that must cope with complex electromagnetical environments. This paper is outlined in the context of developing the necessary tools to allow the quick deployment of these signalling systems by contributing to an easier analysis of their behaviour under the effect of electromagnetical interferences. Specifically, this paper presents the modelling of the Eurobalise-train communication flow in a general purpose simulation tool. It is critical to guarantee this communication link since any lack of communication may lead to a stop of the train and availability problems. In order to model precisely this communication link we used real measurements done in a laboratory equipped with elements defined in the suitable subsets. Through the simulation study carried out, we obtained performance indicators of the physical layer such as the received power, SNR and BER. The modelling presented in this paper is a required step to be able to provide quality of service indicators related to perturbed scenarios.

Dynamic optimization of track components to minimize rail corrugation

In this paper, the influence on corrugation of the most significant track parameters has been examined. After this parametric study, the optimization of the track parameters to minimize the undulatory wear growth has been achieved. Finally, the influence of the dispersion of the track and contact parameters on corrugation growth has been studied. A method has been developed to obtain an optimal solution of the track parameters which minimizes corrugation growth, thus ensuring that this solution remains optimum despite dispersion of track parameters and wheel-rail contact uncertainties. This work is based on the computer application RACING (RAil Corrugation INitiation and Growth) which has been developed by the authors to predict rail corrugation features.

A comprehensive method for the elastic calculation of the two-point wheel-rail contact

This work shows the method developed to solve the wheel-rail contact problem via a look-up table with a three-dimensional elastic model. This method enables introduction of the two contact point effect on vehicle movement using three-dimensional analysis of surfaces including the influence of the angle of attack. This work presents several dynamic simulations and studies the impact that the introduction of the two contact points on three dimensions has on wear indexes and derailment risk against traditional bidimensional analysis. Furthermore, it studies advantages and disadvantages of using a look-up table against an on-line resolution of the problem.

Design of an optimised wheel profile for rail vehicles operating on two track gauges

This paper sets out an optimum synthesis methodology for wheel profiles of railway vehicles in order to secure good dynamic behaviour with different track configurations. Specifically, the optimisation process has been applied to the case of rail wheelsets mounted on double gauge bogies, that move over two different gauges, which also have different types of rail: the Iberian gauge (1668 mm) and the UIC gauge (1435 mm). Optimisation is performed using Genetic Algorithms and traditional optimisation methods in a complementary way. The objective function used is based on an ideal equivalent conicity curve which ensures good stability on straight sections and also proper negotiation of curves. To this end the curve is constructed in such a way that it is constant with a low value for small lateral wheelset displacements (with regard to stability), and increases as the displacements increase (to facilitate negotiation of curved sections). Using this kind of ideal conicity curve also enables a wheel profile to be secured where the contact points have a larger distribution over the active contact areas, making wear more homogeneous and reducing stresses. The result is a wheel profile with a conicity that is closer to the target conicity for both gauges studied, producing better curve negotiation while maintaining good stability on straight sections of track. The paper shows the resultant wheel profile, the contact curves it produces, and a number of dynamic analyses demonstrating better dynamic behaviour of the synthesised wheel on curved sections with respect to the original wheel.

Handover en LTE basado en distancia en plataforma de simulación

[ES]Mejorar el proceso de handover en el despliegue de comunicaciones inalámbricas de banda ancha tradicionalmente ha motivado muchas iniciativas de investigación. En el dominio de los ferrocarriles de alta velocidad, el reto es incluso mayor. Debido a las largas distancias que se cubren, el nodo móvil se ve envuelto en una secuencia obligatoria de procesos de handover. Consecuentemente, un rendimiento pobre en la ejecución de esos procesos de handover degrada significativamente el rendimiento global extremo a extremo. Este documento propone una nueva estrategia de handover para el dominio de los ferrocarriles: un algoritmo de decisión para LTE basado en distancia en lugar de en potencia. La decisión de realizar el handover se realiza cuando un eNB candidato se encuentra más cerca del UE que el eNB fuente. Adicionalmente, cabe la posibilidad de retrasar esa decisión mediante un umbral. Asimismo, se añade una nueva función al modelo de LTE de la plataforma de simulación empleada en la verificación de este modelo. Este mecanismo de decisión introduce un retardo menor en los procesos de handover y, en consecuencia, la calidad extremo-a-extremo aumenta.

Modelización acústica del interior de un Tren de Alta Velocidad

[ES]El presente Trabajo de Fin de Grado, titulado ‘Modelización Acústica del Interior de un Tren de Alta Velocidad’, tiene como objetivo el análisis acústico a bajas frecuencias del habitáculo de un coche de un tren de alta velocidad. La temática ha sido elegida debido a la creciente presencia de trenes de alta velocidad en nuestro entorno, en los cuales el Control Acústico o de Ruidos es un aspecto muy importante para el confort del medio de transporte. Dentro de los ruidos por los que se ve afectado el tren, los de baja frecuencia son los más difíciles de tratar y controlar, y es por ello que van a constituir la línea de trabajo de este proyecto. La estructura de lo que se va a tratar en este proyecto es la siguiente: En primer lugar, se analizará el contexto en que se encuadra este proyecto y las razones que han llevado a su realización. Posteriormente, se explicarán los fundamentos teóricos que hay detrás de los análisis que se van a realizar. Más adelante se pasará al análisis del caso práctico que se ha elegido para ilustrar el proyecto: el habitáculo de un coche del tren Serie 120 de Renfe, construido por CAF [1, 2, 3]. Se realizarán tanto análisis modales como de respuesta forzada. Dicho ejemplo servirá de base para asentar las conclusiones y proponer la aplicación que se les puede dar a éstas, así como las líneas de investigación para las cuales este proyecto puede ser un punto de partida.

Modelización acústica del interior de un tren de alta velocidad.

[ES]El presente Trabajo de Fin de Grado titulado 'Modelización Acústica del Interior de un Tren de Alta Velocidad' tiene como tarea la realización de diversos análisis acústicos de un habitáculo de un coche ferroviario. El principal objetivo va a ser ofrecer una guía detallada a modo de manual de usuario para llevar a cabo dichos análisis sin necesitar información adicional. Las herramientas de ayuda a utilizar van a ser un programa CAD de diseño como Solid Edge ST6 o Catia V5 y un software de elementos finitos como Ansys.

Modelling and Simulation of ERTMS for Current and Future Mobile Technologies

Nowadays, train control in-lab simulation tools play a crucial role in reducing extensive and expensive on-site railway testing activities. In this paper, we present our contribution in this arena by detailing the internals of our European Railway Train Management System in-lab demonstrator. This demonstrator is built over a general-purpose simulation framework, Riverbed Modeler, previously Opnet Modeler. Our framework models both ERTMS subsystems, the Automatic Train Protection application layer based on movement authority message exchange and the telecommunication subsystem based on GSM-R communication technology. We provide detailed information on our modelling strategy. We also validate our simulation framework with real trace data. To conclude, under current industry migration scenario from GSM-R legacy obsolescence to IP-based heterogeneous technologies, our simulation framework represents a singular tool to railway operators. As an example, we present the assessment of related performance indicators for a specific railway network using a candidate replacement technology, LTE, versus current legacy technology. To the best of our knowledge, there is no similar initiative able to measure the impact of the telecommunication subsystem in the railway network availability.

ETCS protokoloaren hedatzea simulazio hibridodun ingurune batean System-in-the-loop erreminta erabiliz.

[EU]Gaur egun, Europa mailan European Rail Traffic Management System (ERTMS) seinaleztapen-sistema bateratua hedatzen ari dira trenbide sare desberdinen arteko elkar eragintasuna bultzatzeko. Proiektu honen helburua da ERTMS sistemaren barneko ETCS protokoloa hedatzea simulazio hibridodun ingurune batean, ERTMS sistemaren hedatzea azkartuko duten erakusleak sortuz. Horretarako, OPNET simulagailuaren System-in-the-loop erreminta erabili da. Erreminta hau baliatuz ETCS protokoloaren pakete errealak ingurune simulatuan integratzeko funtzioen liburutegi bat idatzi da. Amaitzeko, liburutegi hori baliatuz ETCS protokoloak sareko arazoen aurrean duen errendimenduaren analisi bat burutu da eta liburutegi berri horrek pakete errealak simulatuetara itzultzean (eta kontrakoa) duen errendimendua zein den aztertu da.

Implementación de sistema ETCS en entorno cliente-servidor.

[ES]La interoperabilidad entre distintas redes ferroviarias europeas es muy escasa. Para dar solución a este problema, la Unión Europea creó el sistema europeo de gestión del tráfico ferroviario (ERTMS), encargado de crear un estándar único para toda la red europea. El objetivo de este proyecto es la implementación del sistema ETCS ( European Train Control System ) en un entorno cliente-servidor. La implementación incluye el sistema del tren y el del centro de control (RBC). Se ha implementado de forma que se pueda operar sobre dos protocolos de red transporte, de forma que será compatible tanto para redes orientadas a la conexión (TCP) como no orientadas a conexión (UDP).