Gender segregation in technological undergraduate studies in the University of the Basque Country (UPV/EHU)

In this work we study the gender segregation in technological undergraduate studies in the University of The Basque Country (UPV/EHU). For this study we use the data of new admissions at the UPV/EHU. They are from the time period of the years 2003-2013. We focus on the first and last year to check if the segregation has changed over these ten years. We build segregation curves within the Lorenz approach. Our results show that the gender segregation in technological undergraduate studies in the University of the Basque Country has increased over the last ten years. We also show that the distribution between men and women has changed.  

Centro de Acogida Inmediata –CAI- para víctimas de violencia de género: marco teórico

El presente documento hace parte del Proyecto Técnico “Centro de Acogida Inmediata –CAI- para víctimas de violencia de género”, elaborado para la Asociación BETA, Asociación para el Desarrollo de Proyectos de Intervención Social, presentado a la convocatoria del Departamento de Asuntos Sociales y de las Personas Mayores (Nº Expediente 2014//CONASP0148; CÓDIGO CPV: 85311000 Servicios de Asistencia Social con alojamiento).

Company financial performance: Does board size matter? Case of the EUROSTOXX50 index

[EN] This study analyzes the relationship between board size and economic-financial performance in a sample of European firms that constitute the EUROSTOXX50 Index. Based on previous literature, resource dependency and agency theories, and considering regulation developed by the OECD and European Union on the normative of corporate governance for each country in the sample, the authors propose the hypotheses of both positive linear and quadratic relationships between the researched parameters. Using ROA as a benchmark of financial performance and the number of members of the board as measurement of the board size, two OLS estimations are performed. To confirm the robustness of the results the empirical study is tested with two other similar financial ratios, ROE and Tobin s Q. Due to the absence of significant results, an additional factor, firm size, is employed in order to check if it affects firm performance. Delving further into the nature of this relationship, it is revealed that there exists a strong and negative relation between firm size and financial performance. Consequently, it can be asseverated that the generic recommendation one size fits all cannot be applied in this case; which conforms to the Recommendations of the European Union that dissuade using generic models for all countries.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Landscape Genetics for the Empirical Assessment of Resistance Surfaces: The European Pine Marten (Martes martes) as a Target-Species of a Regional Ecological Network

Coherent ecological networks (EN) composed of core areas linked by ecological corridors are being developed worldwide with the goal of promoting landscape connectivity and biodiversity conservation. However, empirical assessment of the performance of EN designs is critical to evaluate the utility of these networks to mitigate effects of habitat loss and fragmentation. Landscape genetics provides a particularly valuable framework to address the question of functional connectivity by providing a direct means to investigate the effects of landscape structure on gene flow. The goals of this study are (1) to evaluate the landscape features that drive gene flow of an EN target species (European pine marten), and (2) evaluate the optimality of a regional EN design in providing connectivity for this species within the Basque Country (North Spain). Using partial Mantel tests in a reciprocal causal modeling framework we competed 59 alternative models, including isolation by distance and the regional EN. Our analysis indicated that the regional EN was among the most supported resistance models for the pine marten, but was not the best supported model. Gene flow of pine marten in northern Spain is facilitated by natural vegetation, and is resisted by anthropogenic landcover types and roads. Our results suggest that the regional EN design being implemented in the Basque Country will effectively facilitate gene flow of forest dwelling species at regional scale.

The prevalence of diabetes-related complications and multimorbidity in the population with type 2 diabetes mellitus in the Basque Country

Background: Type 2 diabetes mellitus is associated with a diverse range of pathologies. The aim of the study was to determine the incidence of diabetes-related complications, the prevalence of coexistent chronic conditions and to report multimorbidity in people with type 2 diabetes living in the Basque Country. Methods: Administrative databases, in four cross sections (annually from 2007 to 2011) were consulted to analyse 149,015 individual records from patients aged >= 35 years with type 2 diabetes mellitus. The data observed were: age, sex, diabetes-related complications (annual rates of acute myocardial infarction, major amputations and avoidable hospitalisations), diabetes-related pathologies (prevalence of ischaemic heart disease, renal failure, stroke, heart failure, peripheral neuropathy, foot ulcers and diabetic retinopathy) and other unrelated pathologies (44 diseases). Results: The annual incidence for each condition progressively decreased during the four-year period: acute myocardial infarction (0.47 to 0.40%), major amputations (0.10 to 0.08%), and avoidable hospitalisations (5.85 to 5.5%). The prevalence for diabetes-related chronic pathologies was: ischaemic heart disease (11.5%), renal failure (8.4%), stroke (7.0%), heart failure (4.3%), peripheral neuropathy (1.3%), foot ulcers (2.0%) and diabetic retinopathy (7.2%). The prevalence of multimorbidity was 90.4%. The highest prevalence for other chronic conditions was 73.7% for hypertension, 13.8% for dyspepsia and 12.7% for anxiety. Conclusions: In the type 2 diabetes mellitus population living in the Basque Country, incidence rates of diabetes complications are not as high as in other places. However, they present a high prevalence of diabetes related and unrelated diseases. Multimorbidity is very common in this group, and is a factor to be taken into account to ensure correct clinical management.

Changes in social inequalities in disability-free life expectancy in Southern Europe: the case of the Basque Country

Background: Health expectancy is a useful tool to monitor health inequalities. The evidence about the recent changes in social inequalities in healthy expectancy is relatively scarce and inconclusive, and most studies have focused on Anglo-Saxon and central or northern European countries. The objective of this study was to analyse the changes in socioeconomic inequalities in disability-free life expectancy in a Southern European population, the Basque Country, during the first decade of the 21st century. Methods: This was an ecological cross-sectional study of temporal trends on the Basque population in 1999-2003 and 2004-2008. All-cause mortality rate, life expectancy, prevalence of disability and disability free-life expectancy were calculated for each period according to the deprivation level of the area of residence. The slope index of inequality and the relative index of inequality were calculated to summarize and compare the inequalities in the two periods. Results: Disability free-life expectancy decreased as area deprivation increased both in men and in women. The difference between the most extreme groups in 2004-2008 was 6.7 years in men and 3.7 in women. Between 1999-2003 and 2004-2008, socioeconomic inequalities in life expectancy decreased, and inequalities in disability-free expectancy increased in men and decreased in women. Conclusions: This study found important socioeconomic inequalities in health expectancy in the Basque Country. These inequalities increased in men and decreased in women in the first decade of the 21st century, during which the Basque Country saw considerable economic growth.

Frame-level features conveying phonetic information for language and speaker recognition

150 p.

Political Institutions, Technology and Growth: a dynamic panel approach

This paper investigates whether the effect of political institutions on sectoral economic performance is determined by the level of technological development of industries. Building on previous studies on the linkages among political institutions, technology and economic growth, we employ the dynamic panel Generalized Method of Moments (GMM) estimator for a sample of 4,134 country-industries from 61 industries and 89 countries over the 1990-2010 period. Our main findings suggest that changes of political institutions towards higher levels of democracy, political rights and civil liberties enhance economic growth in technologically developed industries. On the contrary, the same institutional changes might retard economic growth of those industries that are below a technological development threshold. Overall, these results give evidence of a technologically conditioned nature of political institutions to be growth-promoting.

Genotypes, Recombinant Forms, and Variants of Norovirus GII.4 in Gipuzkoa (Basque Country, Spain), 2009-2012

Background: Noroviruses (NoVs) are genetically diverse, with genogroup II-and within it-genotype 4 (GII.4) being the most prevalent cause of acute gastroenteritis worldwide. The aim of this study was to characterize genogroup II NoV causing acute gastroenteritis in the Basque Country (northern Spain) from 2009-2012. Methods: The presence of NoV RNA was investigated by reverse transcriptase-polymerase chain reaction (RT-PCR) in stool specimens from children younger than 15 years old with community-acquired acute gastroenteritis, and from hospitalized adults or elderly residents of nursing homes with acute gastroenteritis. For genotyping, the open reading frames ORF1 (encoding the polymerase) and ORF2 (encoding the major capsid protein) were partially amplified and sequenced. Recombinant strains were confirmed by PCR of the ORF1/ORF2 junction region. Results: NoV was detected in 16.0% (453/2826) of acute gastroenteritis episodes in children younger than 2 years, 9.9% (139/1407) in children from 2 to 14 years, and 35.8% (122/341) in adults. Of 317 NoVs characterized, 313 were genogroup II and four were genogroup I. The GII.4 variants Den Haag-2006b and New Orleans-2009 predominated in 2009 and 2010-2011, respectively. In 2012, the New Orleans-2009 variant was partially replaced by the Sydney-2012 variant (GII.Pe/GII.4) and New Orleans-2009/Sydney-2012 recombinant strains. The predominant capsid genotype in all age groups was GII.4, which was the only genotype detected in outbreaks. The second most frequent genotype was GII.3 (including the recently described recombination GII.P16/GII.3), which was detected almost exclusively in children. Conclusion: Nine different genotypes of NoV genogroup II were detected; among these, intergenotype recombinant strains represented an important part, highlighting the role of recombination in the evolution of NoVs. Detection of new NoV strains, not only GII.4 strains, shortly after their first detection in other parts of the world shows that many NoV strains can spread rapidly.

Análisis de la desigualdad económica en los municipios del País Vasco agrupados por tamaño de la población. Economic Inequality in the municipalities of the Basque Country aggregated by population size.

This paper analyses the economic inequality in the municipalities of the Basque Country during the period 1996 and 2010. We have used dates from the Udalmap database mainly the GDP per capita. We have drawn Lorenz Curves and also we have computed Gini indexes to analyse the evolution of inequality during this period. Therefore, we have concluded that there has been an increase of the economic inequality in the municipalities of the Basque Country during this period of time.

Analysis of the housing market in the autonomous community of the Basque country: the adjustment after the burst of the housing bubble

In this project study the characteristic and dynamics of the residential housing market in the Basque country. When strong expansion and colapsing emerged in 2007,studied the differents adjustment.

Entrepreneurship in the University of the Basque Country (UPV/EHU)

Currently entrepreneurship is a basic pillar in the socioeconomic area of any country since it contributes to attain the government objectives of job creation and boost of dynamism and competitiveness of the business network. These aspects are even more crucial nowadays due to the global economic crisis. This paper attempts to provide some new insights about the scientific field entrepreneurship in the Basque Country analyzing some aspects related to the entrepreneurial activity, the profile of the entrepreneur and the characteristics of the entrepreneurial businesses. It also aims to provide empirical evidence that proves the good features of the spin-offs and TBF groups as job creators, technology transferors to the society and important actors in the growth and development of the economies for both the business network and its surrounding society. To this aim, a descriptive study has been performed of the firms belonging to the Zitek Program of Bizkaia Campus of the University of the Basque Country (UPV/EHU).

Factors behind the wage in the Basque Country

[EN]This project aims to determine the factors which influence workers’ wages in the Basque Country, taking data from the INE (Spanish Statistical Office). In first place, I will decide which variables to choose and describe them. Then they will be used to build a wage model. At this point I will observe their behaviour according to their values and the possible differences between them. Once these variables are described, they will be used to develop an econometric model that will allow to see the different effects of the variables on the endogenous variable, in this case the gross annual wage. Finally, all the analysed data will be taken and examined to draw the final conclusions and see how workers’ age, training or gender affect their salary. [EN]