Estudio comparativo de tecnologías comerciales de valorización de residuos solidos urbanos

Debido al incremento en la demand a de combustibles, y al consiguiente aumento en el precio del petróleo, se plantea el uso de la biomasa como sustituto de los combustibles fósiles. La biomasa está considerada como una fuente de energía renovable y c ada vez s e está apostando más por su uso ya que contribuye a la reducción de l CO 2 de la atmó sfera. Como la biomasa proviene de fuentes naturales, se supone que todo el CO 2 que ha absorbido durante su c iclo de vida para desarrollarse es igual a la cantidad de CO 2 que se emite al utilizar la bi omasa como combustible, por lo que el ciclo de carbono es neutro. Por otro lado, la biomasa contiene un bajo contenido , casi despreciable, de sulfuros, nitrógeno y cenizas, por lo que las emisiones producidas son menores. El termino biomasa involucra toda la materia orgánica existente en la naturaleza, por lo que utilizar ésta como combustible para la obtención de electricidad es una opción muy atractiva. Ahora bien, dado que el uso masivo de la biomasa para fines energéticos puede acarrear serios problemas medioambientales, hay que tener sumo cuidado a la hora de utilizarla , como por ejemplo en las calderas de pellets. Desde el punto de vista de la contaminación obtener calor a partir de esta fuente renovable es más ecológico, pero puede llegar a originar s erios problemas de deforestación. O tro ejemplo sería el uso de cultivos energéticos para la obtención de biocombustibles. El us o de éstos supondría su escasez debido al aumento de la demanda de éstos para fines energéticos, por lo que el precio de dichos cultivos aumentaría. Por lo tanto, la solución ideal consistiría en buscar un equilibrio o el tipo de biomasa que menos repercusión tenga sobre el medio ambiente. Entre esta última opción se encuentran los residuos sólidos urbanos (RSU) . Según la ley 22/2 011, de l 28 de Julio, de residuos y suelos contaminados, l os residuos sólidos urbanos son aquellos que son generados en los hogares como consecuencia de las actividades domésticas . Debido a que aproximadamente un 60% de su composición es materia orgánica , se pueden clasificar como biomasa, por lo que s e puede decir que los residuos sólidos urbanos son un “tipo de biomasa” a los que sería interesa nte dar uso . Debido a que l os residuos constituyen un gran problema ambiental, social y económico, se requiere mayor esfuerzo para su reducción y prevención. El aumento de la calidad de vida de la población ha hecho que cada vez se generen más residuos , por lo que es necesario un si stema eficaz para la gestión de éstos

Estudio de catalizadores basados en zeolitas HZSM-5 sometidas a tratamiento in situ con vapor de agua para la transformación de 1-buteno a propileno

El propileno es un monómero muy versátil y es la materia prima para una amplia gama de polímeros, intermedios y productos químicos. Esta versatilidad se debe a su estructura química: al igual que el etileno, el propileno contiene un doble enlace carbono - carbono, pero a diferencia de éste, el propileno contiene también un grupo metil - alílico (un grupo metilo adyacente a un doble enlace), otorgando a los químicos, diseñadores catalíticos e ingenieros dos distintas alternativas para llevar a cabo las trasformaciones químicas, por lo que son más numerosos los derivados del propilen o que del etileno (Plotkin, 2005).

Comidas preparadas sin gluten : APPCC y planes de apoyo

La enfermedad celíaca es una intolerancia permanente al gluten, proteína que forma parte de algunos cereales como trigo,cebada, centeno, triticale, kamut, espelta y probablemente, avena. Esta proteína puede producir una lesión severa en la mucosa del intestino de los individuos celiacos que influye en la adecuada absorción de los nutrientes de los alimentos (proteínas, grasas, hidratos de carbono, sales minerales y vitaminas), provocando en ocasiones desequilibrios nutricionales. Los síntomas más habituales de la enfermedad son diarrea, malnutrición, distensión abdominal, rechazo alimentario, anemia, osteoporosis y en niños, retraso en el crecimiento. En España la prevalencia de la enfermedad celíaca es del 1% aunque hay que tener en cuenta que según estudios recientes el 75% de los celíacos están sin diagnosticar. En la actualidad el único tratamiento posible es mantener de por vida una alimentación libre de gluten. Cuando se sigue una dieta estricta sin gluten, las personas celíacas recuperan la estructura normal del intestino y desaparecen los síntomas descritos. El enfermo celíaco debe retirar de su dieta habitual los cereales que contienen gluten y todos los derivados de éstos. Algunos alimentos se identifican fácilmente, como por ejemplo, harinas, pastas alimenticias, productos de bollería y pastelería, panes, etc. Sin embargo, otros derivados forman parte de los alimentos como ingredientes y no se reconocen fácilmente. Dentro de este grupo se encuentran féculas, malta, sémolas, aditivos espesantes, etc.

Advanced Reaction Systems for Hydrogen Production

[EN] This PhD work started in March 2010 with the support of the University of the Basque Country (UPV/EHU) under the program named “Formación de Personal Investigador” at the Chemical and Environmental Engineering Department in the Faculty of Engineering of Bilbao. The major part of the Thesis work was carried out in the mentioned department, as a member of the Sustainable Process Engineering (SuPrEn) research group. In addition, this PhD Thesis includes the research work developed during a period of 6 months at the Institut für Mikrotechnik Mainz GmbH, IMM, in Germany. During the four years of the Thesis, conventional and microreactor systems were tested for several feedstocks renewable and non-renewable, gases and liquids through several reforming processes in order to produce hydrogen. For this purpose, new catalytic formulations which showed high activity, selectivity and stability were design. As a consequence, the PhD work performed allowed the publication of seven scientific articles in peer-reviewed journals. This PhD Thesis is divided into the following six chapters described below. The opportunity of this work is established on the basis of the transition period needed for moving from a petroleum based energy system to a renewable based new one. Consequently, the present global energy scenario was detailed in Chapter 1, and the role of hydrogen as a real alternative in the future energy system was justified based on several outlooks. Therefore, renewable and non-renewable hydrogen production routes were presented, explaining the corresponding benefits and drawbacks. Then, the raw materials used in this Thesis work were described and the most important issues regarding the processes and the characteristics of the catalytic formulations were explained. The introduction chapter finishes by introducing the concepts of decentralized production and process intensification with the use of microreactors. In addition, a small description of these innovative reaction systems and the benefits that entailed their use were also mentioned. In Chapter 2 the main objectives of this Thesis work are summarized. The development of advanced reaction systems for hydrogen rich mixtures production is the main objective. In addition, the use and comparison between two different reaction systems, (fixed bed reactor (FBR) and microreactor), the processing of renewable raw materials, the development of new, active, selective and stable catalytic formulations, and the optimization of the operating conditions were also established as additional partial objectives. Methane and natural gas (NG) steam reforming experimental results obtained when operated with microreactor and FBR systems are presented in Chapter 3. For these experiments nickel-based (Ni/Al2O3 and Ni/MgO) and noble metal-based (Pd/Al2O3 and Pt/Al2O3) catalysts were prepared by wet impregnation and their catalytic activity was measured at several temperatures, from 973 to 1073 K, different S/C ratios, from 1.0 to 2.0, and atmospheric pressure. The Weight Hourly Space Velocity (WHSV) was maintained constant in order to compare the catalytic activity in both reaction systems. The results obtained showed a better performance of the catalysts operating in microreactors. The Ni/MgO catalyst reached the highest hydrogen production yield at 1073 K and steam-to-carbon ratio (S/C) of 1.5 under Steam methane Reforming (SMR) conditions. In addition, this catalyst also showed good activity and stability under NG reforming at S/C=1.0 and 2.0. The Ni/Al2O3 catalyst also showed high activity and good stability and it was the catalyst reaching the highest methane conversion (72.9 %) and H2out/CH4in ratio (2.4) under SMR conditions at 1073 K and S/C=1.0. However, this catalyst suffered from deactivation when it was tested under NG reforming conditions. Regarding the activity measurements carried out with the noble metal-based catalysts in the microreactor systems, they suffered a very quick deactivation, probably because of the effects attributed to carbon deposition, which was detected by Scanning Electron Microscope (SEM). When the FBR was used no catalytic activity was measured with the catalysts under investigation, probably because they were operated at the same WHSV than the microreactors and these WHSVs were too high for FBR system. In Chapter 4 biogas reforming processes were studied. This chapter starts with an introduction explaining the properties of the biogas and the main production routes. Then, the experimental procedure carried out is detailed giving concrete information about the experimental set-up, defining the parameters measured, specifying the characteristics of the reactors used and describing the characterization techniques utilized. Each following section describes the results obtained from activity testing with the different catalysts prepared, which is subsequently summarized: Section 4.3: Biogas reforming processes using γ-Al2O3 based catalysts The activity results obtained by several Ni-based catalysts and a bimetallic Rh-Ni catalyst supported on magnesia or alumina modified with oxides like CeO2 and ZrO2 are presented in this section. In addition, an alumina-based commercial catalyst was tested in order to compare the activity results measured. Four different biogas reforming processes were studied using a FBR: dry reforming (DR), biogas steam reforming (BSR), biogas oxidative reforming (BOR) and tri-reforming (TR). For the BSR process different steam to carbon ratios (S/C) from 1.0 to 3.0, were tested. In the case of BOR process the oxygen-to-methane (O2/CH4) ratio was varied from 0.125 to 0.50. Finally, for TR processes different S/C ratios from 1.0 to 3.0, and O2/CH4 ratios of 0.25 and 0.50 were studied. Then, the catalysts which achieved high activity and stability were impregnated in a microreactor to explore the viability of process intensification. The operation with microreactors was carried out under the best experimental conditions measured in the FBR. In addition, the physicochemical characterization of the fresh and spent catalysts was carried out by Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES), N2 physisorption, H2 chemisorption, Temperature Programmed Reduction (TPR), SEM, X-ray Photoelectron Spectroscopy (XPS) and X-ray powder Diffraction (XRD). Operating with the FBR, conversions close to the ones predicted by thermodynamic calculations were obtained by most of the catalysts tested. The Rh-Ni/Ce-Al2O3 catalyst obtained the highest hydrogen production yield in DR. In BSR process, the Ni/Ce-Al2O3 catalyst achieved the best activity results operating at S/C=1.0. In the case of BOR process, the Ni/Ce-Zr-Al2O3 catalyst showed the highest reactants conversion values operating at O2/CH4=0.25. Finally, in the TR process the Rh-Ni/Ce-Al2O3 catalyst obtained the best results operating at S/C=1.0 and O2/CH4=0.25. Therefore, these three catalysts were selected to be coated onto microchannels in order to test its performance under BOR and TR processes conditions. Although the operation using microreactors was carried out under considerably higher WHSV, similar conversions and yields as the ones measured in FBR were measured. Furthermore, attending to other measurements like Turnover Frequency (TOF) and Hydrogen Productivity (PROD), the values calculated for the catalysts tested in microreactors were one order of magnitude higher. Thus, due to the low dispersion degree measured by H2-chemisorption, the Ni/Ce-Al2O3 catalyst reached the highest TOF and PROD values. Section 4.4: Biogas reforming processes using Zeolites L based catalysts In this section three type of L zeolites, with different morphology and size, were synthesized and used as catalyst support. Then, for each type of L zeolite three nickel monometallic and their homologous Rh-Ni bimetallic catalysts were prepared by the wetness impregnation method. These catalysts were tested using the FBR under DR process and different conditions of BSR (S/C ratio of 1.0 and 2.0), BOR (O2/CH4 ratio of 0.25 and 0.50) and TR processes (at S/C=1.0 and O2/CH4=0.25). The characterization of these catalysts was also carried out by using the same techniques mentioned in the previous section. Very high methane and carbon dioxide conversion values were measured for almost all the catalysts under investigation. The experimental results evidenced the better catalytic behavior of the bimetallic catalysts as compared to the monometallic ones. Comparing the catalysts behavior with regards to their morphology, for the BSR process the Disc catalysts were the most active ones at the lowest S/C ratio tested. On the contrary, the Cylindrical (30–60 nm) catalysts were more active under BOR conditions at O2/CH4=0.25 and TR processes. By the contrary, the Cylindrical (1–3 µm) catalysts showed the worst activity results for both processes. Section 4.5: Biogas reforming processes using Na+ and Cs+ doped Zeolites LTL based catalysts A method for the synthesis of Linde Type L (LTL) zeolite under microwave-assisted hydrothermal conditions and its behavior as a support for heterogeneously catalyzed hydrogen production is described in this section. Then, rhodium and nickel-based bimetallic catalysts were prepared in order to be tested by DR process and BOR process at O2/CH4=0.25. Moreover, the characterization of the catalysts under investigation was also carried out. Higher activities were achieved by the catalysts prepared from the non-doped zeolites, Rh-Ni/D and Rh-Ni/N, as compared to the ones supported on Na+ and Cs+ exchanged supports. However, the differences between them were not very significant. In addition, the Na+ and Cs+ incorporation affected mainly to the Disc catalysts. Comparing the results obtained by these catalysts with the ones studied in the section 4.4, in general worst results were achieved under DR conditions and almost the same results when operated under BOR conditions. In Chapter 5 the ethylene glycol (EG) as feed for syngas production by steam reforming (SR) and oxidative steam reforming (OSR) was studied by using microchannel reactors. The product composition was determined at a S/C of 4.0, reaction temperatures between 625°C and 725°C, atmospheric pressure and Volume Hourly Space Velocities (VHSV) between 100 and 300 NL/(gcath). This work was divided in two sections. The first one corresponds to the introduction of the main and most promising EG production routes. Then, the new experimental procedure is detailed and the information about the experimental set-up and the measured parameters is described. The characterization was carried out using the same techniques as for the previous chapter. Then, the next sections correspond to the catalytic activity and catalysts characterization results. Section 5.3: xRh-cm and xRh-np catalysts for ethylene glycol reforming Initially, catalysts with different rhodium loading, from 1.0 to 5.0 wt. %, and supported on α-Al2O3 were prepared by two different preparation methods (conventional impregnation and separate nanoparticle synthesis). Then, the catalysts were compared regarding their measured activity and selectivity, as well as the characterization results obtained before and after the activity tests carried out. The samples prepared by a conventional impregnation method showed generally higher activity compared to catalysts prepared from Rh nanoparticles. By-product formation of species such as acetaldehyde, ethane and ethylene was detected, regardless if oxygen was added to the feed or not. Among the catalysts tested, the 2.5Rh-cm catalyst was considered the best one. Section 5.4: 2.5Rh-cm catalyst support modification with CeO2 and La2O3 In this part of the Chapter 5, the catalyst showing the best performance in the previous section, the 2.5Rh-Al2O3 catalyst, was selected in order to be improved. Therefore, new Rh based catalysts were designed using α-Al2O3 and being modified this support with different contents of CeO2 or La2O3 oxides. All the catalysts containing additives showed complete conversion and selectivities close to the equilibrium in both SR and OSR processes. In addition, for these catalysts the concentrations measured for the C2H4, CH4, CH3CHO and C2H6 by-products were very low. Finally, the 2.5Rh-20Ce catalyst was selected according to its catalytic activity and characterization results in order to run a stability test, which lasted more than 115 hours under stable operation. The last chapter, Chapter 6, summarizes the main conclusions achieved throughout this Thesis work. Although very high reactant conversions and rich hydrogen mixtures were obtained using a fixed bed reaction system, the use of microreactors improves the key issues, heat and mass transfer limitations, through which the reforming reactions are intensified. Therefore, they seem to be a very interesting and promising alternative for process intensification and decentralized production for remote application.

Charge and spin transport in graphene devices

170 p.

Poly(lactic acid)-based bio-blends and nanocomposites

172 p.

Desarrollo de una solución CAD/CAM para la fabricación automatizada de brocas.

[ES]Este proyecto se basa en la idea de llevar a cabo un código CAM de un diseño anterior (CAD). El modelo CAD consiste en una broca, que está diseñado específicamente para perforar materiales apilados, como el titanio y fibra de carbono que son ampliamente utilizados por la industria de la aviación en la actualidad. Para lograr este objetivo se sería necesario contar con los recursos adecuados, licencias de software, soporte de fábrica y por supuesto el conocimiento de la materia. Este texto tiene como objetivo la ceración del código CAM, así como demostrar la rentabilidad de este método de mecanizado alternativo.

Aporte adicional de energía renovable geotérmica a instalación con cogeneración en hospital existente.

[ES]Este proyecto tiene como objetivo apoyar a la generación de energía por cogeneración mediante una fuente de energía renovable. Se pretende plantear una solución que satisfaga parte de las necesidades básicas del Hospital Universitario de Álava, en su sede del Hospital de Santiago, de una forma económicamente rentable. Este proyecto se enmarca dentro de los esfuerzos en la promoción de energías renovables que comenzaron con el protocolo Kioto, al que le siguieron los objetivos Europa 20/20/20. Se realizará un acercamiento a la utilización de la energía renovable geotérmica como fuente de energía que disminuye el impacto ambiental. El edificio hospitalario considerado ya cuenta con un sistema de generación energética con cogeneración, considerada dentro del régimen especial, por la utilización de energía residual para procesos que de otra manera hubieran requerido consumo de combustible. Se plantearán diferentes alternativas para la generación de energía térmica con geotermia, que al ser de origen renovable, es una fuente de energía de combustibles no fósiles, y se demostraran sus beneficios analizando cómo mejora la huella de carbono del hospital con la propuesta. Finalmente, para valorar si se trata de un proyecto viable se planteará el estudio económico analizando el presupuesto y análisis de rentabilidad.

La utilización del acero inoxidable en estructuras de hormigón armado en edificación.

[ES]El hormigón, y más concretamente las armaduras de hormigón, son usadas a diario en múltiples lugares. Estas armaduras son utilizadas en diversas estructuras, de las cuales se espera una duración relativamente larga; aún así, en ciertos ambientes, ciertos agentes, tales como el dióxido de carbono o los cloruros, consiguen atravesar el hormigón alcanzando las armaduras y reducir el pH del hormigón hasta el punto que el acero del interior queda despasivado. A partir de aquí, y debido mayormente al oxígeno, el acero se corroe, reduciendo drásticamente la vida de dichas armaduras y, por tanto, de las estructuras. Debido a esto, la utilización de armaduras de acero inoxidable, en lugar de las típicas de acero al carbono, está cobrando fuerza, a pesar de su mayor coste inicial. Su mayor resistencia a la corrosión en ambientes agresivos convierte al acero inoxidable en una opción a tener en cuenta para prolongar la vida de las estructuras que se encuentran en estos ambientes. En este trabajo se han comparado ambos tipos de aceros, en dos tipos de secciones diferentes, resaltando las ventajas e inconvenientes de cada uno de ellos, mayormente centrándose en la resistencia y el coste que tiene cada uno de ellos. Los resultados demuestran que el acero inoxidable supone una ventaja considerable en algunos ámbitos de uso, a pesar de que en otros el acero al carbono siga siendo más viable. A pesar de esto, queda claro que la evolución ascendente del uso de armaduras de acero inoxidable está de sobra justificada.

Análisis del flujo de

[ES]Este proyecto estudia el flujo de dióxido de carbono a través de toberas de diferentes diámetros con un software de simulación, mediante el método de los volúmenes finitos (CFD). El objetivo es poder elegir la tobera que optimice la cantidad de gas utilizado en función de la distancia a la que tenga que llegar. Con un modelo computacional adecuado, esta simulación puede realizarse en un ordenador sin tener que recurrir a ensayos, ahorrando costes y tiempo.

Development of the heterogeneous catalysts for the production of levulinic acid from furfuryl alcohol

207 p.

Aireztapenen maiztasunaren neurketa bihotz biriketako berpiztean kapnografia erabiliz.

[EN]Hyperventilation, which is common both in-hospital and out-of-hospital cardiac arrest, decreases coronary and cerebral perfusion contributing to poorer survival rates in both animals and humans. Current resucitation guidelines recommend continuous monitoring of exhaled carbon dioxide (CO2) during cardiopulmonary resucitation (CPR) and emphasize good quality of CPR, including ventilations at 8-10 min1. Most of commercial monitors/de- brilators incorporate methods to compute the respiratory rate based on capnography since it shows uctuations caused by ventilations. Chest compressions may induce artifacts in this signal making the calculation of the respiratory rate di cult. Nevertheless, the accuracy of these methods during CPR has not been documented yet. The aim of this project is to analyze whether the capnogram is reliable to compute ventilation rate during CPR. A total of 91 episodes, 63 out-of-hospital cardiac arrest episodes ( rst database) and 28 in-hospital cardiac arrest episodes (second database) were used to develop an algorithm to detect ventilations in the capnogram, and the nal aim is to provide an accurate ventilation rate for feedback purposes during CPR. Two graphic user interfaces were developed to make the analysis easier and another two were adapted to carry out this project. The use of this interfaces facilitates the managment of the databases and the calculation of the algorithm accuracy. In the rst database, as gold standard every ventilation was marked by visual inspection of both the impedance, which shows uctuations with every ventilation, and the capnography signal. In the second database, volume of the respiratory ow signal was used as gold standard to mark ventilation instants since it is not a ected by chest compressions. The capnogram was preprocessed to remove high frequency noise, and the rst di erence was computed to de ne the onset of inspiration and expiration. Then, morphological features were extracted and a decission algorithm built based on the extracted features to detect ventilation instants. Finally, ventilation rate was calculated using the detected instants of ventilation. According to the results obtained in this project, the capnogram can be reliably used to give feedback ventilation rate, and therefore, on hyperventilation in a resucitation scenario.

Geomicrobiology of meromictic, metal-mine pit lakes in the Iberian Pyrite Belt and biotechnological applications

220 p.

Síntesis enantio- y diastereocontrolada de aminas y alcoholes propargílicos mediante reacciones de Mannich y aldólica organocatalíticas

373 + anexos

Metodologías Sintéticas para la Obtención de Compuestos de Coordinación Metal-Orgánicos

Comunicación a congreso (póster): Reunión conjunta de la Sociedad Española de Mineralogía y la Sociedad Española de Arcillas (SEM-SEA 2012), Bilbao 27-30 de junio 2012.