Validation d’un procédé automatisé d’extraction sur phase solide de glandes digestives de moules pour l’identification et la quantification des dinophysistoxines en LC/ESI/SM2 par piégeage d’ions quadripolaire

This report presents a new extraction method of the dinophysistoxins (DTXs), confirmed by quantification using high-performance liquid chromatography coupled to mass spectrometry with an ion trap and electro spray interface (HPLC/ESI/MS2). The method originality consists on the adaptation of DTXs basic extraction procedure (liquid/ liquid) to a solid phase extraction (SPE) via a robotic station: ASPEC XLi The parameters of the automatization procedure were optimized to obtain the best DTXs recovery rate. These improvements were loaded with digestive gland mussel homogenat realized on a silica cartridge SPE, activated in hexane/chloroform (50:50), washed with hexane/chloroform (50:50) and extracted by an elution gradient (chloroform methanol (65:35) and methanol (100%)). This method was validated according to two normative referentials (linearity, detection quantification limits and accuracy…) : - The Guide of the Pharmacy industry: Analytical Validation, report of the commission SFSTP 1992 (French Corporation of the Sciences and Technical Pharmaceutical), - - The Procedure of validation of an alternative method in compare to a reference method. (AFNOR, 1998. NF V 03-110). Comparison with the classical liquid/liquid extraction and the automated method present clear advantages. In an analytical method the extraction is generally considered to be the most labor-intensive and error-prone step. This new procedure allowed us to increase throughput, to improve the reproducibility and to reduce the error risks due to the individual manual treatments.

Rejets urbains. Volet Manche - Atlantique - Site de Morlaix - Etudes sédimentologique et Bathymétrique de l' estuaire de Morlaix

In order to increase our knowledge about sediment transport in the bay and maritime part of the River of Morlaix (Finistère), measurernènts have been perforrned on site. This report gives the granulometrical and physical parameters of the sediments as weIl as the hydrodynamics, used for a model of particulate transport in the area. The rnodel and its application will be published later

Campagne SELECT 13 N/O Gwen-Drez - Du 10 au 28 avril 1997

Influence of the nature of the twine on the codend selectivity: Reminder: During the “SELECT 12” campaign in April 1996, we demonstrated that the nature of the material used for the manufacture of the trawl codend has an influence on the selectivity. Results showed that the use of single twine made of polyamide in the codend was more selective on hake and Nephrops than single twine made of polyethylene. Nevertheless single twine made of polyamide codend loses “flexibility” with use and therefore a study should be done to investigate its impact on selectivity (fishermen do not often use this equipment: however this 150 mesh net is particularly selective and it would be premature to discard it). Influence of the diameter of the twine and the mesh number on the selectivity of codends: These results show the high variability of codend charactistics tested on hake. The parameters tested during this campaign - e.g., diameter of the twine and mesh number (length of codend) - influence the selectivity of codends. It seems that the capture volume and the length of the codend are essential for the selectivity, while the nature of the equipment is secondary. However each parameter should be investigated in a future campaign. Furthermore, any regulatory measure that would seek to suppress the use of double twine polyethylene codend would be premature. Perspective: further experiment should be considered with the standard polyamide codend of 32.5 mm. • An additional experiment with the 100 mesh and 65 mm polyethylene double twine test codend to determine the influence of the mesh number on the selectivity; • An additional experiment with the 100 mesh deep and 65 mm polyethylene double twine (4 mm diameter) test codend to determine the influence of the diameter of the twine on the selectivity.

Faisabilité biologique de la production de larves d'huîtres creuses Crassostrea gigas à partir d'eau de mer du site de Leucate. Convention de recherche Ifremer/Région Languedoc-Roussillon - Rapport final.

Afin de vérifier sur un site régional la présence d'une qualité d'eau de mer permettant la réalisation d'élevages larvaires d'huîtres creuses Crassostrea gigas (et/ou d'huîtres plates Ostrea edulis) sur une base régulière tout au long de l'année, une série d'élevages comparatifs a été réalisée à la Station IFREMER de Palavas, de mars 1995 à septembre 1995. Le matériel biologique nécessaire à cette comparaison est constitué de larves d'huîtres creuses Crassostrea gigas et en algues unicellulaires provenant de l'éc1oserie commerciale de la SATMAR. Les résultats obtenus démontrent la capacité de l'eau de mer du site étudié sur Leucate à supporter la production de larves d'huîtres creuses compétentes à se métamorphoser et à se fixer. Cette étude s'inscrit dans la démarche de la Région Languedoc-Roussillon et du CEPRALMAR visant à favoriser l'implantation d'une écloserie de production de Mollusques Bivalves sur le littoral méditerranéen.