Statistical quality control charts on attributes in fish processing technology

Apart from the use of statistical quality control chart for variables or attributes of food products in a food processing industry, the application of these charts for attributes of fishery products is explained. Statistical quality control chart for fraction defectives is explained by noting defective fish sausages per shift from a sausage industry while control chart for number of defectives is illustrated for number of defective fish cans in each hour of its production of a canning industry. C-chart is another type of control chart which is explained here for number of defects per single fish fillet sampled a1l random for every five minutes in a processing industry. These statistical quality control charts help in the more economic use of resource, time and labour than control charts for variables of products. Also control charts for attributes exhibit the quality history of finished products at different times of production thereby minimizing the risk of consumer rejection.

Physics in fish processing technology

To design, develop and put into operation an equipment either to increase the productivity or to improve the existing technique to obtain a better quality of the product, the fishery engineer/scientist should have a comprehensive knowledge of fundamental principles involved in the process. Many a technique in fish processing technology, whether it applies to freezing, dehydration or canning, involves always a type of heat transfer, which is dependent to a certain extent on the external physical parameters like temperature. humidity, pressure, air flow etc. and also on the thermodynamic properties of fish muscle in the temperature ranges encountered. Similarly informations on other physical values like dielectric constant and dielectric loss in the design of quick trawlers and in quality assessment of frozen/iced fish, refractive index and viscosity in the measurement of the saturation and polymerisation of fish oils and shear strength in the judgement of textural qualities of cooked fish are also equally important.

Evaluation of a summer institute on fish processing technology

The utility of Summer Institute Efficiency Index (SIEI) is demonstrated using data from evaluation of a summer institute in fish processing. The SIEI worked to 76.16 showing high efficiency rating. The acquisition of skills appears to be independent of coverage and utility perception. The three dimensions of evaluation correlate highly with SIEI.

Effect of demonstration in transferring fish processing technology

A group of 28 fisherwomen who attended demonstration on three subjects, namely, preparation of fish wafers, fish pickles and fish soup powder showed significant knowledge and skill gain for all the three messages. The total knowledge and skill gain was maximum for preparation of fish wafers followed by that for preparation of fish soup powder and fish pickles.

The significance of fish handling, preservation and processing in the development of Nigeria inland fishery with special reference to Kainji Lake

The traditional approach to fish handling, preservation and processing technology in inland fishery is critically examined using the experience in Kainji Lake as a model. The need to uplift the fishermen technology is emphasized with the ultimate expectations of improvement in fish quality

On the comparative efficiency of trawls made of cotton, polyethylene and combination of both the materials

The merits and demerits of cotton, polyethylene and combination of the two materials ascertained on the basis of cost, wear and tear, maintenance, total catch and qualitative analysis of the catch are discussed by making comparative fishing experiments with the three trawl gears made of these materials. The study can be concluded with a suggestion for switching over to polyethylene twisted monofilaments for better, in case of bottom trawls without in any way adversely affecting the catch of shrimps and at the same time for enhanced fish catch. Even though the combination net is found to be equal in efficiency as the polyethylene net this idea cannot be conveniently adopted from the point of view of economy.

Tunas and tuna fisheries of the World: an annotated bibliography, 1930-1953

This bibliography attempts to list, with descriptive annotations and a subject index, important literature published between 1930 and 1953 dealing with the tunas and their fisheries in all parts of the world. It is thus a continuation of Corwin's (1930) work, which extended with similar scope through 1929, and an extension of Shimada's (1951), which was limited to the biology of Pacific tunas. The tunas with which it deals are those fishes customarily so-called in commercial parlance and usually classified in the genera Thunnus, Neothunnus, Parathunnus, Germo, Katsuwonus, Euthynnus and Auxis and their various synonyms. All aspects of the biology of the tunas are dealt with, as are descriptions and histories of all types of tuna fisheries, commercial and exploratory tuna fishing methods and results, fishing gear, catch statistics, and fishery management, but processing technology, economics and marketing, folklore, and purely literary references have been excluded.

Adoption of simple technologies for poverty alleviation

Several technologies have been disseminated to the rural populace of which few were adoptable while others were above their reaches. The adoption-rejection behaviour of the people of Monai community formed the basis for this study. Twenty women fish processors were interviewed using standard questionnaire. The study discovered that the women fish processors used the new introduced Better Life Programme Banda in rotation for even coverage. The use of new Banda has a positive effect on the quantity of fish processed and income. Additional two basins were processed on weekly basis with an income of N1,000.00 over the previous processing technology. No women processor however had the new Banda on individual basis for cost. Hence rural people adopt a technology that is cheap and simple but conforming to their traditional practices and values. Therefore any innovation intended for the rural populace should take cognizance of their socio-economic and cultural factors

Sustainability of indigenous technology in postharvest fisheries operations in Edo and Delta states, Nigeria

The study examined the sustainability of various indigenous technologies in post-harvest fishery operation in Edo and Delta States (Nigeria). A total of seventy processors were interviewed during the survey through a random selection. The data obtained were analysed by descriptive statistics. The results obtained revealed that the majority of the fish processors within the study areas were married with women who were not educated beyond the first Leaving School Certificate. Most of the fish processed were bought fresh, while the commonest method of preservation/processing practiced was smoking. The type of processing equipment used was the Chorkor smoking kiln and the drum smoker while the commonest source of energy is firewood. The processing activities within the communities were found to be profitable. However it was observed that due to the high cost of processing materials and equipment, the economic growth and the living standard is quite low. Some recommendations were made to improve the traditional method of fish preservation and processing

Processing of oil enriched fish (Hypophthalmichthys molitrix) sausage using emulsion technology

In most countries along with various food products, fish sausage is supplied in different formulas. Unfortunately, in our country because of different reasons, production and supply of fish sausage in industrial level has not yet been successful and some efforts taken, has also been doomed to failure or not welcomed. Fat fish is a rich source of poly unsaturated fatty acids (PUFA) and co-3. In this research, efforts have been made to produce and enrich sausage with fish oil and maintenance of fatty acids has also been experimented using gas chromatography along with heating process. The stages of producing ground fish and fish sausage are as the following: Transferring and preparing fish, washing the cleared fish, filleting, separating fillet steak, washing and drying them, Refining meat, Producing and homogenizing mixture from basic ingredients in a cutter, filling, knotting and heat processing. The fish sausage produced by this method tried and welcomed by the subjects. In the product in which fish meat was used, the subjects was not recognized fish flavor and taste and when in addition to fish meat, fish oil was used during enrichment, the flavor and taste of fish was considered as highly acceptable. TVN measurement of the produced fish sausage was kept in the refrigerator in two month was at a maximum of 16.5, the amount of peroxide was at a maximum 1.5% after the period of two months. During this period the Colony count was at maximum of 19.5 x 104, the high maximum of the number of coliforms was 10/gr, and for mold and yeast 83/gr , but Escherichia coli, Staphylococcus aureus, Salmonella and Clostridium perfringens were not found. The protein of the resulting product was 15-18%, lipid at about 11-15% and moisture 60-65%. Comparing fatty acids, including unsaturated fatty acids in ground and oil fish used in producing fish sausage with those of fish sausage showed that the heat used in processing had the least effect on fatty acids of the meat and oil used here and the resulting fish sausage is considered as food for good health.

Maintaining the "public good" nature of improved fish strains: dissemination of knowledge and materials

Many sources of information that discuss currents problems of food security point to the importance of farmed fish as an ideal food source that can be grown by poor farmers, (Asian Development Bank 2004). Furthermore, the development of improved strains of fish suitable for low-input aquaculture such as Tilapia, has demonstrated the feasibility of an approach that combines “cutting edge science” with accessible technology, as a means for improving the nutrition and livelihoods of both the urban poor and poor farmers in developing countries (Mair et al. 2002). However, the use of improved strains of fish as a means of reducing hunger and improving livelihoods has proved to be difficult to sustain, especially as a public good, when external (development) funding sources devoted to this area are minimal1. In addition, the more complicated problem of delivery of an aquaculture system, not just improved fish strains and the technology, can present difficulties and may go explicitly unrecognized (from Sissel Rogne, as cited by Silje Rem 2002). Thus, the involvement of private partners has featured prominently in the strategy for transferring to the public technology related to improved Tilapia strains. Partnering with the private sector in delivery schemes to the poor should take into account both the public goods aspect and the requirement that the traits selected for breeding “improved” strains meet the actual needs of the resource poor farmer. Other dissemination approaches involving the public sector may require a large investment in capacity building. However, the use of public sector institutions as delivery agents encourages the maintaining of the “public good” nature of the products.

Marketing of fishing gear materials and fishing gear making in parts of Kainji Lake basin

The importance of fishing gear in fishing cannot be over-emphasized; as without it fish cannot be obtained. The method used to catch fish affects the condition in which the product is landed. This means that a bad-catching method would produced bad fish to the consumer. To achieve the goal of self-sufficiency in fish production in Nigeria, there is need to address the lingering problems of fishing gear and craft technology, especially in terms of availability of materials and their cost. The sale and making of fishing gear materials are two areas of fisheries, which are yet to be exploited by the general public as forms of businesses for livelihood. The study is conducted in villages around the lower part of Kainji Lake, towards the dam, including New Bussa. It reveals that only the fishermen themselves are involved in making their own fishing gears while those involved in the selling of fishing gear materials like the sheet netting, ropes, twines, floats, sinkers etc are business men and women who may not have any experience of fishing. Also considered in the study is the art of making fishing crafts like the canoe and gourd. Very few entrepreneurs are involved and they are so skilled that each is specialized in the making of only one kind of craft or gear

IBM PC Data Acquisition and Processing Software Evaluation

Commercially available software packages for IBM PC-compatibles are evaluated to use for data acquisition and processing work. Moss Landing Marine Laboratories (MLML) acquired computers since 1978 to use on shipboard data acquisition (Le. CTD, radiometric, etc.) and data processing. First Hewlett-Packard desktops were used then a transition to the DEC VAXstations, with software developed mostly by the author and others at MLML (Broenkow and Reaves, 1993; Feinholz and Broenkow, 1993; Broenkow et al, 1993). IBM PC were at first very slow and limited in available software, so they were not used in the early days. Improved technology such as higher speed microprocessors and a wide range of commercially available software made use of PC more reasonable today. MLML is making a transition towards using the PC for data acquisition and processing. Advantages are portability and available outside support.

Waste minimisation in fishing operations

Sources of wastes in fishing operations mainly include bycatch discards; processing wastes where catch is processed onboard; plastic wastes due to abandoned, lost and discarded fishing gear; bilges and other wastes from the vessel operations. Fishing systems in general have an associated catch of nontargeted organisms known as bycatch. Non-selective fishing gear that is not modified or equipped to exclude non-targeted organisms, may take a significant quantity of bycatch of non-targeted finfish, juvenile fish, benthic animals, marine mammals, marine birds and vulnerable or endangered species that are often discarded. Average annual global discards, has been estimated to be 7.3 million t, based on a weighted discard rate of 8%, during 1992-2001 period. Trawl fisheries for shrimp and demersal finfish account for over 50% of the total estimated global discards. Plastic materials are extensively used in fisheries, owing to their durability and other desirable properties, contributing to the efficiency and catchability of the fishing gear. However, plastics biodegrade at an extremely slow rate compared to other organic materials. Abandoned, lost or otherwise discarded fishing gear (ALDFG) and related marine debris have been recognized as a critical problem in the marine environment and for living marine resources. Prevention of excess fishing capacity by appropriate management measures could lead to enormous savings in terms of fuel consumption, emissions and bycatch discards from the excess fishing fleet, capital and operational investments and labour deployment in capture fisheries, with significant economic gains. In this paper, wastes originating from fishing operations are reviewed, along with their environmental impacts and possible mitigation measures

Recent advances in fish processing and product development

There are good possibilities for expanding the consumer sector in both the traditional and nontraditional marine products. Frozen shrimp continues to be the item of highest demand in foreign markets. Individual quick frozen (IQF) prawns which are indeed value added products and have already penetrated international markets elicit export incentive from development agencies like the Marine Products Export Development Authority. With the projected potential of 1.8 lakh tonnes of cephalopods against the current yield of 13,000 tonnes, there are good prospects of increasing exports of frozen squid and cuttlefish. The technology of packing fish in retortable pouches as an alternative to canning has now been perfected. Salted fish mince has good market potential in India and abroad.