Farm-raised shrimp: good aquacultural practices for product quality and safety

(PDF has 75 pages)

Choosing the best model in the presence of zero trade: a fish product analysis

The purpose of the paper is to test the hypothesis that food safety (chemical) standards act as barriers to international seafood imports. We use zero-accounting gravity models to test the hypothesis that food safety (chemical) standards act as barriers to international seafood imports. The chemical standards on which we focus include chloramphenicol required performance limit, oxytetracycline maximum residue limit, fluoro-quinolones maximum residue limit, and dichlorodiphenyltrichloroethane (DDT) pesticide residue limit. The study focuses on the three most important seafood markets: the European Union’s 15 members, Japan, and North America.

Wassergehalte tiefgefrorener Kammmuscheln

Kurzfassung Der Handel mit tiefgefrorenen Kammmuscheln (Pectinidae) hat in den letzten Jahren deutlich zugenommen und ist von der Jakobsmuschel (Pecten maximus) auf eine Reihe weiterer Spezies erweitert worden. Neben nicht zutreffender Handelsbezeichnung fällt diese Erzeugnisgruppe immer wieder durch einen erhöhten Wasserzusatz negativ auf. Es wurde die Zusammensetzung des Muskelfleisches von Produkten aus dem deutschen Handel bestimmt und das Wasser zu Protein- Verhältnis (W/P) berechnet. Eine erhebliche Zahl von Proben hatte hohe Wassergehalte und ein W/P Verhältnis > 5. Dies betraf insbesondere die Tiefseescallop (Placopecten magellanicus) und die Japanische Kammmuschel (Mizuhopecten yessoensis). In den meisten Fällen wurden Zusatzstoffe nachgewiesen, obwohl die gesetzlich vorgeschriebene Deklaration fehlte. Abstract The market share of quick-frozen scallops (Pectinidae) has increased significantly in recent years and has been extended besides the king scallop (Pecten maximus) to a variety of other species. Apart from an incorrect labeling this product group stands out for often excessively high water addition. The composition of the muscle meat and the water to protein ratio (W/P) was determined in samples from the German retail. The results showed that a considerable number of samples had very high moisture contents and W/P ratios > 5. These facts were mainly true for Placopecten magellanicus and Mizuhopecten yessoensis. There was no conformity with the prescribed declaration of food additives.

Recent advances in fish processing and product development

There are good possibilities for expanding the consumer sector in both the traditional and nontraditional marine products. Frozen shrimp continues to be the item of highest demand in foreign markets. Individual quick frozen (IQF) prawns which are indeed value added products and have already penetrated international markets elicit export incentive from development agencies like the Marine Products Export Development Authority. With the projected potential of 1.8 lakh tonnes of cephalopods against the current yield of 13,000 tonnes, there are good prospects of increasing exports of frozen squid and cuttlefish. The technology of packing fish in retortable pouches as an alternative to canning has now been perfected. Salted fish mince has good market potential in India and abroad.

Ensiled product from fish by microbial fermentation

Fish ensilage for animal feed stuff was prepared from Jew fish (Pseudosciaena spp.) and Silver bellies (Leiognathus spp.) by fermentation with pure culture of Lactobacillus piantarum NCIB 6105. The precooked ensiled product gave better product of fish silage (high content of lactic acid, about 5%). Protein Nitrogen content ranged between 1.76 to 1.94%. During storage for one year, the Protein Nitrogen loss was not significant. The material can be used as a supplemental animal ration.

Studies on blackening of canned prawns. Pt. 1. Influence of copper and iron on product blackening

A linear relationship was observed between the copper content and intensity of blackening in commercially canned prawn meat. Average copper and iron contents of non-blackened canned prawn meat were 9.6 and 32.5 ppm on dry weight basis respectively. In the blackened product copper content ranged from 15.8 to 63.9 ppm and iron content between 43.7 and 71.45 ppm depending on the intensity of blackening. But incorporation of copper in the above range to experimental cans produced blackening while iron up to 250 ppm did not impart any blackening under standard conditions of canning.

Preparation of an extruded fish snack using twin screw extruder and the storage characteristics of the product

A value-added extruded fish product was prepared with corn flour (80%) and fish (sciaenid) powder (20%), using a twin-screw extruder. The effect of different parameters like moisture, temperature, fish powder concentration, speed of the extruder and die-diameter on expansion ratio and crisp texture were studied. The storage characteristics of the final product were studied using three different types of packaging under nitrogen flushing. The study revealed that aluminum foil is the best packaging material to keep the product acceptable for more than three months.

Commodity and product identification for value chain analysis.

This commodity and product identification research was undertaken in the context of the CGIAR Research Program on Aquatic Agricultural Systems (AAS). AAS seeks to reduce poverty and improve food security for the millions of small-scale fishers and farmers who depend on the world’s floodplains, deltas and coasts. The objective of this research is to strengthen the capacity of AAS to undertake value chain studies with high potential impact on smallholders. The capacity-building aspect of this research was focused on the process of commodity and product identification for value chain analysis. Its scope was limited to fish and other aquatic animals and products in the Tonle Sap area identified for AAS intervention. The result of the identification process was the selection of a number of commodities and products that were deemed to involve a high number of smallholders along the value chain and that have high market development potential.

Evaluation of biochemical characteristics of a traditional salt fermented fish product of northeast India with special reference to its flavour components

'Lona ilish', is a traditional salt fermented fish product, widely consumed and very popular in north-east part of India and Bangladesh. It is prepared exclusively from a high fat fish, Hilsa (Tenualosa) ilisha. 'Lona ilish' was prepared in the laboratory following traditional process. After 150 days of fermentation, a better quality 'lona ilish' was obtained. Biochemical characteristics of market sample was estimated and compared with the laboratory prepared one. A variation in biochemical composition was observed. Sensory quality of the final product of laboratory prepared 'lona ilish' was compared with the market sample and found that the laboratory prepared product scored better than the market sample. The moisture (49.89%) and salt (15.48%) of the final product was found to be satisfactory for stability of the 'lona ilish' at ambient temperature. Analysis of volatile compounds of 'lona ilish' was done using GC-MS. It was concluded that, aldehydes, ketones and esters may possibly contribute characteristic aromas to the overall flavour of the salt fermented hilsa.

Development of intermediate moisture marinated fish product and its storage characteristics

An attempt was made to prepare an intermediate moisture (around 44% moisture) marinated (pH around 4) fish product. Fillets from Sciaenid fish (each fish weighing 70-80 gm) were dipped in a solution containing 7% acetic acid, 20% common salt and 1% propionic acid for 2 hours. After soaking, the soaked fillets were partially dried to about 44% moisture. Three effective hurdles like low pH (by using 7% acetic add and 1% propionic acid), low water activity (by using 20% salt and partially drying the fillets) and preservative (1% propionic add), were used to prepare a shelf-stable product at room temperature. The dried product was sprayed with 0.0 5% BHA in 50% alcohol and further dried for 10 minutes to remove added water and alcohol, thereby another hurdle (preservative) against fat oxidation. The product was packed in 300 gauge polythene bags and stored in transparent screw cap plastic jars. Fortnightly samples were drawn and subjected to biochemical, bacteriological and organoleptic evaluation to study its storage characteristics. The product was in good acceptable form up to 4 months at ambient temperature. The product needed one hour soaking in water with two changes of water in between to make it free from excess salt and acid smell.