On the comparative efficiency of trawls made of cotton, polyethylene and combination of both the materials

The merits and demerits of cotton, polyethylene and combination of the two materials ascertained on the basis of cost, wear and tear, maintenance, total catch and qualitative analysis of the catch are discussed by making comparative fishing experiments with the three trawl gears made of these materials. The study can be concluded with a suggestion for switching over to polyethylene twisted monofilaments for better, in case of bottom trawls without in any way adversely affecting the catch of shrimps and at the same time for enhanced fish catch. Even though the combination net is found to be equal in efficiency as the polyethylene net this idea cannot be conveniently adopted from the point of view of economy.

Comparative efficiency of trawls made of nylon, polyethylene monofilament and tape twines

Results of comparative fishing operations conducted with three nets of identical design made of nylon, twisted polyethylene monofilament and high density polyethylene (HDPE) tape twines are presented in this communication. Since the tape net recorded the highest prawn and fish catch, monofilament and nylon following in order, it can be recommended to the fishing industry as one of the cheapest and effective fishing materials evolved for trawl fabrication.

Tensile strength properties of polyethylene netting twines under exposure to out-door and artificial UV radiation

Photodegradation of three types of polyethylene twines namely, polyethylene fibrillated tape twine, polyethylene flat tape twine and polyethylene monofilament twines were studied by exposing them to sunlight and artificial UV radiation. The percentage residual strength varied in the samples, the monofilament with the highest residual strength followed by fibrillated tape twine and flat tape twine. A plot of the difference between the breaking strengths of the fibrillated tape twine and the mono filament twines against any given period of exposure exhibited a linear relationship

Der Anteil Transportwasser bei Heringsanlandungen mittels Vakuumsauganlage in Großraumbehältern

Estimation of the water content of herring landings caused by pressure-vacuum double tank pumps and using of multi purpose transport containers About 80 % of herring that is landed in the fish processing company Euro-Baltic Fischverarbeitungs GmbH Mukran, on the Isle of Rügen at the Baltic coast is transported from the cutter into the processing plant by pumping. For this purpose 700 l-Euro-size polyethylene tubs (containers) are filled with herring by means of a pressure-vacuum pump-systems during the unloading of the cutter. To be able to pump the fish from the hold on board it is kept floating in water (transport water). At the end of the pumping/transporting process the fish ends in a dewatering box before reaching the tub, where the transport water is separated from the fish. Then, the not completely dewatered fish is slipped into the transport containers. The amount of transport water reaching the containers depends on the type of PV-equipment and on the amount of transport water in the fish holds of the different cutters. Methodologically the mixture of fish and water must be weighed together. For the experiments specially designed transport container were used which allow the measurement of the run-off of the water to be quantified and thus to measure the proportion of water remaining with the fish. Based on 30 experiments it could be shown that on average 6 % of remaining weight of the mixture is water. Furthermore, factors were detected which influence the variability of the proportion of water.

The phytoplankton of an enriched, soft-water lakel subject to intermittent hydraulic flushing (Grasmere, English Lake District)

This paper describes some characteristic features of the phytoplankton of Grasmere, one of the smaller of the principal lakes of the English Lake District, and attempts to relate these to distinctive physical and chemical properties of the lake. Quantitative data presented herein are derived from 5-m vertical column samples, collected with a flexible polyethylene hose close to the deepest point of Grasmere, generally at intervals of 14 days ( 7 days from 1972 to 1978, inclusive). The study concludes that although Grasmere has been subject to increased phosphorus-loading and has quickly developed many features associated with eutrophication, the composition of its plankton has retained the characteristics of a mesotrophic, soft-water lake: a vernal diatom maximum, generally dominated by Asterionella, is followed by summer growths of nanoplanktonic species, of various colonial Chlorophyceae, before a substantial return to Asterionella-dominance in the autumn.

Escapement of the Cape rock lobster (Jasus lalandii ) through the mesh and entrance of commercial traps

Metal-framed traps covered with polyethylene mesh used in the fishery for the South African Cape rock lobster (Jasus lalandii) incidentally capture large numbers of undersize (<75 mm CL) specimens. Air-exposure, handling, and release procedures affect captured rock lobsters and reduce the productivity of the stock, which is heavily fished. Optimally, traps should retain legalsize rock lobsters and allow sublegal animals to escape before traps are hauled. Escapement, based on lobster morphometric measurements, through meshes of 62 mm, 75 mm, and 100 mm was investigated theoretically under controlled conditions in an aquarium, and during field trials. SELECT models were used to model escapement, wherever appropriate. Size-selectivity curves based on the logistic model fitted the aquarium and field data better than asymmetrical Richards curves. The lobster length at 50% retention (L50) on the escapement curve for 100-mm mesh in the aquarium (75.5 mm CL) approximated the minimum legal size (75 mm CL); however estimates of L50 increased to 77.4 mm in field trials where trapentrances were sealed, and to 82.2 mm where trap-entrances were open. Therfore, rock lobsters that cannot escape through the mesh of sealed field traps do so through the trap entrance of open traps. By contrast, the wider selection range and lower L25 of field, compared to aquarium, trials (SR = 8.2 mm vs. 2.6 mm; L25 =73.4 mm vs. 74.1 mm), indicate that small lobsters that should be able to escape from 100-mm mesh traps do not always do so. Escapement from 62-mm mesh traps with open entrance funnels increased by 40−60% over sealed traps. The findings of this study with a known size distribution, are related to those of a recent indirect (comparative) study for the same species, and implications for trap surveys, commercial catch rates, and ghost fishing are discussed.

Artificial Habitats for Fisheries Enhancement in the Australian Region

This paper outlines developments over about 20 years in the construction of and ecological research on artificial reefs, fish aggregation devices (FAD's), and other artificial habitats designed to enhance fish populations and fisheries in the Australian region (including New Zealand and Papua New Guinea). Work was initially carried out on multicomponent reefs using a variety of waste materials, as well as some specially constructed concrete and steel structures. Later studies concentrated on single-component reefs, again mainly using waste materials. Although no definitive conclusions were reached on the relative effectiveness of the different materials used, waste motor vehicle tires and derelict ships were generally judged to be the best all-around materials for single-component reef construction in sheltered estuarine and offshore marine environments, respectively, in this region. FAD's comprising polyvinylchloride pipe sparbuoys (or in some areas polyurethane foam floats) attached to railroad car wheel anchors by polyethylene rope and chain, and supporting attractor drapes of synthetic mesh webbing, also provedtobegenerallysuccessfulin thisarea. Overall conclusions for the Australian region include the predominant use of waste materials in artificial reef construction, which has been primarily aimed at recreational fisheries enhancement; the successful use of FAD's for both recreational and commercial fisheries enhancement; the need for further and better planned research into and monitoring of the effectiveness of both of these enhancement methods; and the need for future research into the effectiveness of unfished "artificial habitat reserves" in enhancing fisheries production from surrounding fished areas.

MDNR-NOAA trawl standardization study

Long-term living resource monitoring programs are commonly conducted globally to evaluate trends and impacts of environmental change and management actions. For example, the Woods Hole bottom trawl survey has been conducted since 1963 providing critical information on the biology and distribution of finfish and shellfish in the North Atlantic (Despres-Patango et al. 1988). Similarly in the Chesapeake Bay, the Maryland Department of Natural Resources (MDNR) Summer Blue Crab Trawl survey has been conducted continuously since 1977 providing management-relevant information on the abundance of this important commercial and recreational species. A key component of monitoring program design is standardization of methods over time to allow for a continuous, unbiased data set. However, complete standardization is not always possible where multiple vessels, captains, and crews are required to cover large geographic areas (Tyson et al. 2006). Of equal issue is technological advancement of gear which serves to increase capture efficiency or ease of use. Thus, to maintain consistency and facilitate interpretation of reported data in long-term datasets, it is imperative to understand and quantify the impacts of changes in gear and vessels on catch per unit of effort (CPUE). While vessel changes are inevitable due to ageing fleets and other factors, gear changes often reflect a decision to exploit technological advances. A prime example of this is the otter trawl, a common tool for fisheries monitoring and research worldwide. Historically, trawl nets were constructed of natural materials such as cotton and linen. However modern net construction consists of synthetic materials such as polyamide, polyester, polyethylene, and polypropylene (Nielson et. al. 1983). Over the past several decades, polyamide materials which will be referred to as nylon, has been a standard material used in otter trawl construction. These trawls are typically dipped into a latex coating for increased abrasion resistance, a process that is referred to as “green dipped.” More recently, polyethylene netting has become popular among living resource monitoring agencies. Polyethylene netting, commonly known as sapphire netting, consists of braided filaments that form a very durable material more resistant to abrasion than nylon. Additionally, sapphire netting allows for stronger knot strength during construction of the net further increasing the net’s durability and longevity. Also, sapphire absorbs less water with a specific gravity near 0.91 allowing the material to float as compared to nylon with specific gravity of 1.14 (Nielson et. al. 1983). This same property results in a light weight net which is more efficient in deployment, retrieval and fishing of the net, particularly when towing from small vessels. While there are many advantages to the sapphire netting, no comparative efficiency data is available for these two trawl net types. Traditional nylon netting has been used consistently for decades by the MDDNR to generate long term living resource data sets of great value. However, there is much interest in switching to the advanced materials. In addition, recent collaborative efforts between MDNR and NOAA’s Cooperative Oxford Laboratory (NOAA-COL) require using different vessels for trawling in support of joint projects. In order to continue collaborative programs, or change to more innovative netting materials, the influence of these changes must be demonstrated to be negligible or correction factors determined. Thus, the objective of this study was to examine the influence of trawl net type, vessel type, and their interaction on capture efficiency.

Increase of storage shelf life of locally produced salted/dried fish by redrying and/or packeting

Experiments were undertaken to prolong the storage life of salted/dried fish by re-drying and/or packing. The storage life under normal conditions is 51 days; re-drying the fish at 50°C for 12 hours extends the storage life only by 7 days. However, re-drying and packing gizzard shad (Gonialosa manminna ) in polyethylene maintains the fish in excellent conditions for well over 87 days. The use of air tight bags for storing good quality salted dried fish is recommended.

Packaging and storage studies of dried lizard fish

Packaging and storage studies of salted and dried lizard fish (Saurida sp.) have been conducted using different synthetic films like low density polyethylene (LDPE) of different gauges, high density polyethylene (HDPE) of 200 gauge, polyvinylidene chloride (PVDC) coated 400 MXXT cellophane, 100 gauge polypropylene (PP) and paper laminate of 100 gauge polythene. The films found most effective in the preliminary studies were subsequently used for packaging and storage of dried fish at atmospheric and lower temperature and humidity conditions for confirming their suitability under these conditions. Polyethylene films of higher gauges showed better results under both sets of conditions. PVDC coated cellophane film also performed satisfactorily under the latter conditions which under the former condition got easily attacked by insects. Lower temperature and humidity conditions in general enhanced the storage life of the dried product.

Copper-nickel alloys for marine aquacultural engineering

Engineering developments, problems of marine corrosion, fouling and practical innovative applications of copper-nickel alloys in comparison with other materials for marine aquacultural engineering are presented. Coefficient of drag and hydrodynamic force acting on nylon and polyethylene net enclosures have shown a four-fold increase of force in four months at the Cochin harbour due to fouling. Corrosion behaviour of copper-nickel and other copper base alloys are also presented. Effects of copper additions to culture water are reviewed.

Studies on the ice storage characteristics of blood clam Anadara granosa meat

Ice-storage study of blood clam (Anadara granosa) meat in direct contact and out of contact (in 200 gauge polyethylene bag) with ice was taken up to assess the amenability of the meat to icing. Changes in moisture, total protein, non-protein nitrogen, α amino nitrogen, total volatile base nitrogen, glycogen, free fatty acid, peroxide value, total bacterial count and coliform count were followed every day. The raw and cooked meat were also subjected to organoleptic evaluation. The study showed that the clam meat can be ice-stored in very good condition out of contact with ice in polyethylene packets for 4 days and in direct contact with ice for 2 days.

Studies on the effect of leaching on the quality of ice-stored fish

A comparative ice storage study of milk fish (Chanos chanos) in direct contact and out of contact (in 200 gauge polyethylene bag) with ice was taken up to assess the effect of leaching on quality of ice-stored fish. It was observed that the leaching effect was more significant on TVN and NPN than that on cc amino nitrogen components while there was very little effect on bacterial load. It is concluded that under similar conditions of icing, fish out of contact with ice will have longer shelf life and more acceptability than the fish preserved in contact with ice.

Bulk packages for storage and transportation of salted and dried fish

The effect of bulk packaging on the storage of salted and dried fish was studied at ambient conditions. Four different packaging systems were tried, among which gusseted type high density polyethylene woven sacks having either circular loom or traditional loom laminated with 100 gauge low density polyethylene were found to be best suited for dry fish packaging as they could withstand the hazards of handling, transportation and storage.

Effects of different levels of energy and protein sources on the growth performance, feeding, survival rate and the chemical body composition of juvenile Pacific white shrimp (Litopenaeus vannamei)

The present study was carried out in order to establish an economical effective diet for the pacific white shrimp in the southern part conditions of Iran. With the consideration of three dietary energy levels (E1=262, E2=312, E3=362 kcal 100 g-1 diet) and six ratios of fish meal (FM) to soybean meal (SBM) [(P1=100%FM+0%SBM, P2=80%FM+20%SBM, P3=60%FM+40%SBM, P4=40%FM+60%SBM, P5=20%FM+80%SBM, P6=0%FM+100%SBM)], 18 experimental diets (with 36% crude protein) were prepared. Completely randomized design was used to assign 54 polyethylene 300 litre round tanks provided by aeration and flow through water system and was stocked by 19 juvenile as 3 replicates to each treatment. Shrimps average weight was about 0.77 grams at the start. After 56 days culture period, maximum growth and nutritional performances were observed in the P6E1 treatment (containing 100% soybean meal and 262 kcal 100 g-1 diet) and P5E1 treatment (containing 80% soybean meal and 262 kcal 100 g-1 diet). Also the highest survival rate of the shrimps was observed in the P1E1, P1E2, P3E3 and P5E3 treatments. Additionally interactive effect of different protein ratios and energy levels had significant difference on body protein, fat, fiber and ash contents (P<0.05). Results of the present study suggest the possibility replacement of at least 80% of dietary fish meal by soybean meal in the diet of pacific white shrimp in the conditions of southern part of Iran.