Stray current corrosion of copper sheathing and keel cooling pipe of a 36' trawler

The results of investigations into the cause of an accelerated corrosion of copper sheathing and keel cooling pipe of a 36' wooden trawler are reported. The corrosion is attributed to the stray electric currents originating from the electrical wiring system. The sources of stray currents and the remedial measures have been suggested.

Food composition and digestive enzymes in the gut of the African electric catfish Malapterurus electricus (Gmelin 1789) (Malapteruridae)

Analyses of stomach contents of 330 Malapterurus electricus (standard length, 10.1-30.5 cm) in Mahin Lagoon (southwestern Nigeria) established it as a bottom feeder. There was a preponderance of insects accounting for >80% occurrence and >25% of total volume in stomachs of specimens, suggesting a stenophagous predatory habit. Qualitative and quantitative assays of digestive enzymes in the different regions of the gut (oesophagus, stomach, duodenum, ileum, rectum) were investigated. Carbohydrases (amylase, maltase), chitinase, proteases (pepsin, chymotrypsin, trypsin) and lipases were detected in different gut regions with different activity. The pattern of distribution and relative activity of the enzymes correlated with the predatory diet

Electric fishing survey of the gravel addition sites on the River Wyre, Grizedale Beck and Joshua's Beck.

Although geographically the River Wyre lies between two rivers containing major migrations of adult salmon and sea trout, its rod & line fisheries have for a number of years produced exceptionally low catches. In order to determine the causes of this the Wyre Salmon and Sea trout Restoration Group (WSSRG) was conceived in 1994 as a partnership between the then National Rivers Authority (now Environment Agency), local landowners, angling clubs and interested parties. Two studies of 1994 and 1995 stated that there is a shortage of useable spawning gravels on the river. This is compounded by Abbeystead Reservoir acting as a gravel trap, the siltation of gravels on several side becks and problems with access to available gravels by returning adults. There was also perceived to be a need for accurate fishery data from the river encompassing redd counts, catch data and surveys of fry populations. The 1995 report suggested a number of management proposals which might be adopted in order to improve and create available spawning habitat for migratory salmonids. Funding was made available to create three spawning gravels on each of two side becks (Grizedale Beck and Joshua's Beck) and the addition of gravels to a site oh the main river below Abbeystead Reservoir. Modifications were also made to the fish pass at Abbeystead to allow easier passage of fish. These improvements were made in the autumn of 1995. Salmonid spawning redd counting was undertaken on the whole Wyre catchment in 1995/1996 and specific surveys by electric fishing on the gravel enhancement sites in the summer of 1996. This report details the current state of the improvement works that were undertaken and presents the results of electric fishing surveys in September 1996. A number of lessons have been learnt which will be of great benefit to the Fisheries Function in other parts of the Wyre catchment and the Central Area in general.

River Ribble sheep dip incident September 1997. Electric-fishing survey report

This report summarises the findings of a series of electric-fishing surveys carried out at four sites on the River Ribble from September 1997 to September 1998. The aims of these surveys were to assess the impact on juvenile salmonids of a pollution incident involving Synthetic Pyrethrin (SP) that occurred near High Birkwith I (SD 802 767) in September 1997.One of these sites was 2.65km upstream of the pollution whilst the remaining three were at varying distances downstream. Data was collected during surveys of the River Ribble in 1992, 97 and 98. The 1997 and 1998 surveys were carried out specifically to monitor for any possible effects of the SP discharge. Data are shown as grades derived from the National Fisheries Classification scheme (NFC). Results are given for the four salmonid life stages; 0+ trout, >0+ trout, 0+ salmon, >0+ salmon and also Total Salmonids.

An investigation into the effects of electric fishing equipment on salmon and sea trout within the area of the Lancashire River Board.

The report looks at experiments into electric fishing equipment and effects on salmon and trout within the Lancashire River Board. Experiments include obtaining information on voltage gradients, ascertaining what damage to fish of the larger size groups resulted from electric fishing, determining whether or not fractures could occur in coarse fish and brown trout,similar to those occurring in salmon and sea trout, and effects low temperatures have on electrofishing techniques.

Effective herding of flatfish by cables with minimal seafloor contact

Otter trawls are very effective at capturing flatfish, but they can affect the seaf loor ecosystems where they are used. Alaska f latf ish trawlers have very long cables (called sweeps) between doors and net to herd fish into the path of the trawl. These sweeps, which ride on and can disturb the seaf loor, account for most of the area affected by these trawls and hence a large proportion of the potential for damage to seaf loor organisms. We examined modifications to otter trawls, such that disk clusters were installed at 9-m intervals to raise trawl sweeps small distances above the seafloor, greatly reducing the area of direct seafloor contact. A critical consideration was whether flatfish would still be herded effectively by these sweeps. We compared conventional and modified sweeps using a twin trawl system and analyzed the volume and composition of the resulting catches. We tested sweeps raised 5, 7.5, and 10 cm and observed no significant losses of flatfish catch until sweeps were raised 10 cm, and those losses were relatively small (5–10%). No size composition changes were detected in the flatfish catches. Alaska pollock (Theragra chalcogramma) were captured at higher rates with two versions of the modified sweeps. Sonar observations of the sweeps in operation and the seaf loor after passage confirmed that the area of direct seafloor contact was greatly reduced by the modified sweep

Effect of electric stimulation on heart beat and body muscle in fish

The effect of AC and DC electric stimulations on the heart-rate and the entire body of Heteropneustis fossillis, Tilapia mossambica and Macrobrachium rosenbergii were studied and presented in kymograph tracings. The reaction of spinal cord in Puntius ticto, Heteropneustis fossilis and Tilapia mossambica to D. C. field was observed to find out its role in electric shocks. A test-check of the electrical resistance of a few species was also conducted. The effect of D. C. and A.C. on the body muscle was found to be the same as that in the case of frog. Different degrees of cardiac slowing were observed in AC and DC. Unbalanced galvanotropic movements were also noticed in spinal fishes.

Development of an electric shrimp trawl 1. Reaction of shrimps to low volt direct current

Preliminary attempts were made to assess the effect of direct current on shrimps and to see whether the shrimp could be guided in large numbers into the fishing net by using a current of appropriate voltage without scattering them away as it happens at present. This communication is the first in the series of studies and primarily deals with laboratory equipment and experimental procedures followed.

Studies on arsenical creosote as a wood preservative for marine structures. Part 2. Observation on leaching, corrosion and resistance to borer attack

A detailed study on arsenical creosote with reference to leaching, corrosion and anti-borer properties was carried out. Results showed that aging had very little effect on the preservative which suggested better fixation of the preservative into the wood. Corrosion of mild steel, galvanised iron, aluminium-magnesium alloy (M57S) and copper panels in the preservative was found to be negligible. Normal creosote and low temperature creosote of Regional Research Laboratory, Hyderabad, both fortified with arsenic trioxide resisted borer damage on wooden panels for a period of over five months in the port of Cochin. The performance of low temperature creosote fortified with arsenic was found to be equally satisfactory when compared to normal creosote fortified in the same manner. A loading of 208.6 Kgs/ml³ for Haldu (Adina cordifolia) and 138 Kgs/m³ for Mango (Mangifera indica) in the case of normal creosote and 177 Kgs/m³ for Mango the case of RRL creosote were found to be sufficient for treating the wood.

A case history on the phenomenal corrosion of marine propellers in fishing boats

Although high tensile brassess of copper-zinc alloys (Manganese bronze) find extensive use in all marine applications, under aggressive sea-water, marine propellers cast out of such an alloy frequently suffer heavy corrosion damages due to dezincification. An interesting case history where a number of propellers have undergone dezincification in the Cochin backwaters is narrated in this paper.

Problems associated with the over protection of fishing trawlers against sea water corrosion and fouling

Some presently used anti-fouling materials contain metals and other compounds, which are toxic in the environment. Coating products are not always stable, and there is a resulting pollution hazard. In particular if surfaces are poorly prepared and manufactures' instructions are not closely followed the application of anti-fouling substances becomes pointless and dangerous. In addition the salinity, constant biological activity and suspended particles make seawater a highly corrosive material in its own right.

Effect of sulphide on corrosion of copper in seawater

The corrosion of ETP copper in natural seawater and putrid seawater has been studied. The corrosion rates and the sulphide content were monitored at regular intervals. In the absence of oxygen in the putrid media, the presence of sulphide favoured a reduction in the corrosion rate.