Whole-gear efficiency of a benthic survey trawl for flatfish

Whole-gear efficiency (the proportion of fish passing between the otter doors of a bottom trawl that are subsequently captured) was estimated from data collected during experiments to measure the herding efficiency of bridles and doors, the capture efficiency of the net, and the length of the bridles sufficiently close to the seafloor to elicit a herding response. The experiments were focused on four species of flatfish: arrowtooth flounder (Atheresthes stomias), flathead sole (Hippoglossoides elassodon), rex sole (Glyptocephalus zachirus), and Dover sole (Microstomus pacificus). Whole-gear efficiency varied with fish length and reached maximum values between 40% and 50% for arrowtooth flounder, flathead sole, and rex sole. For Dover sole, however, whole-gear efficiency declined from a maximum of 33% over the length range sampled. Such efficiency estimates can be used to determine catchability, which, in turn, can be used to improve the accuracy of stock assessment models when the time series of a survey is short.

Bioconversion efficiency and growth in the white shrimp Penaeus indicus (Milne Edwards), fed with decomposed mangrove leaves

Food conversion efficiency and growth in the white shrimp Penaeus indicus fed with decomposed mangrove leaves of Avicennia marina and A. officinalis were monitored under laboratory conditions. It was observed that test animals fed with the decomposed leaves of A. marina had higher assimilation efficiency (87.96%), gross growth efficiency (10.82%), net growth efficiency (12.3%) and relative growth rate (0.0603 g/day) than those fed with A. officinalis. The relatively higher growth registered in the animals fed with decomposed leaves of A. marina was attributed to its high calorific and protein content.

Seasonality, labor and integration of aquaculture into southern African smallhold farming systems

Fish production on Malawian smallholdings is generally limited by the quantity and quality of inputs to the pond (Brummett and Noble 1995). The timing of labor availability and other farm activities limit the amount farmers put into their ponds resulting in lower growth rates and yields. There is potential for improving production and yields through modifications of production schedules to accommodate other farming activities. Limited material and labor inputs among farming system enterprises can be better allocated by considering seasonal availability of inputs and adapting the pond and fish farming technology to the farming system. This case from Malawi demonstrates that aquaculture technology that neglects the annual cycle of events and constraints on the farm will not be easily integrated into the farming system. Focusing on technology that maximizes fish production rather than facilitation of adoption and integration has been a feature of the majority of African smallholder agriculture/aquaculture projects. Farming Systems Research (FSR) must identify niches and opportunities for system improvement for it to be worth supporting as a development intervention.

Food conversion efficiency and the von Bertalanffy growth function 1: a modification of Pauly's model

A simple modification of Pauly's model for relating food conversion efficiency (K sub(1)) and body weight is proposed. The key parameter is an index to how efficiently food can be absorbed; the other parameter is related to the surface-limiting growth, an important component of von Bertalanff's and Pauly's theories of fish growth.

Food conversion efficiency and the von Bertalanffy growth function. Part II and conclusion: Extension of the new model to the generalized von Bertalanffy growth function

The simple model relating food conversion efficiency (K sub(1)) to body weight derived from the theoretical concepts behind von Bertalanffy's growth model, is extended here in the context of Pauly's generalization of that model. The exponent, which was fixed to 1/3 in the simple model, is in the extended model equivalent to 1-d, with d being the weight exponent of the anabolism term in Pauly's growth model. This makes the model applicable to fish for which the assumptions of the original (special) version of von Bertalanffy's growth model are violated.

Effects of Gear Modifications on the Trawl Performance and Catching Efficiency of the West Coast Upper Continental Slope Groundfish Survey Trawl

Since 1984, annual bottom trawl surveys of the west coast (California–Washington) upper continental slope (WCUCS) have provided information on the abundance, distribution, and biological characteristics of groundfish resources. Slope species of the deep-water complex (DWC) are of particular importance and include Dover sole, Microstomus pacificus; sablefish, Anoplopoma fimbria; shortspine thornyhead, Sebastolobus alascanus; and longspine thornyhead, S. altivelis. In the fall of 1994, we conducted an experimental gear research cruise in lieu of our normal survey because of concerns about the performance of the survey trawl. The experiment was conducted on a soft mud bottom at depths of 460–490 m off the central Oregon coast. Treatments included different combinations of door-bridle rigging, groundgear weight, and scope length. The experimental design was a 2 ´ 2 ´ 2 factorial within a randomized complete-block. Analysis of variance was used to examine the effects of gear modifications on the engineering performance of the trawl (i.e. trawl dimensions, variation in trawl dimensions, and door attitude) and to determine if catch rates in terms of weight and number of DWC species and invertebrates were affected by the gear modifications. Trawl performance was highly variable for the historically used standard trawl configuration. Improvements were observed with the addition of either a 2-bridle door or lighter ground gear. Changes in scope length had relatively little effect on trawl performance. The interaction of door bridle and ground gear weight had the most effect on trawl performance. In spite of the standard trawl’s erratic performance, catch rates of all four DWC species and invertebrates were not significantly different than the 2-bridle/heavy combination, which did the best in terms of engineering performance. The most important factor affecting DWC catch rates was ground gear. Scope length and the type of door bridle had little effect on DWC catch rates. Subsequent revisions to survey gear and towing protocol and their impact on the continuity of the slope survey time series are discussed.

The Atlantic and Gulf Menhaden Purse Seine Fisheries: Origins, Harvesting Technologies, Biostatistical Monitoring, Recent Trends in Fisheries Statistics, and Forecasting

With its genesis in New England during the 1800's, the purse seine fishery for Atlantic menhaden, Brevoortia tyrannus, expanded south and by the early 1900's ranged the length of the eastern seaboard. The purse seine fishery for Gulf menhaden. B. patronus, is of relatively recent development, exploitation of the stock beginning in the late 1940's. Landings from both fisheries annually comprise 35-40% of the total U. S. fisheries landings, ranking menhaden first in terms of volume landed. Technological advances in harvesting methods, fish-spotting capabilities, and vessel designs accelerated after World War II, resulting in larger, faster, and wider-ranging carrier vessels, improved speed and efficiency of the harvest, and reduction in labor requirements. Chief products of the menhaden industry are fish meal, fish oil, and solubles, but research into new product lines is underway. Since 1955 on the Atlantic coast and 1964 on the Gulf coast, the NMFS has monitored the fisheries for biostatistical data. Annual data summaries of numbers-of-fish-at-age harvested, catch tonnage, and fishing effort of the fleet form the basis of routine stock assessments and annual catch forecasts to industry for the upcoming fishing season. After landings declined in the 1960's, the Atlantic menhaden stock has recovered through the 1970's and 1980's. Exceptional year classes of Gulf menhaden in recent years account for record landings during the 1980's.

Increasing Creel Interview Efficiency Through Early Survey Termination

Operational modifications based on recreational angler activity patterns can be successfully formulated to increase creel survey efficiency without a significant loss of information. This study was conducted to estimate the amount of Texas marine sport-boat angler interview and retained fish data (bay and Gulf) that would be missed both coastwide and within each bay system if surveys were terminated early when no angler interviews were conducted by a specified time. Using this method, <3 percent of the total interviews and retained fish would be missed coastwide by terminating surveys at 1400 hours on weekends and 1600 hours on weekdays throughout the survey year. This would result in the early termination of 14 percent of the weekend surveys and 23 percent of the weekday surveys, thus allowing an annual redirection of 440 work-hours and $6,063 in operating expenses.

Technical efficiency in artisanal fisheries (AF) in Badagry local government area of Lagos State, Nigeria

This study examined the technical efficiency in artisanal fisheries in Lagos State of Nigeria. The study employed a two stage random sampling procedure for the selection of 120 respondents. The analytical techniques involved descriptive statistics and estimation of technical efficiency following maximum likelihood estimation (MLE) procedure available in FRONTIER 4.1. The MLE result of the stochastic frontier production function showed that hired labour, cost of repair and capital items are critical factors that influences productivity of artisanal fishermen with the coefficient of hired labour being highly elastic. This implies that employing more labour will significantly increase the catch in the study area. The predicted farm efficiency with an average value of 0.92 showed that there is a marginal potential of about 8 percent to increase the catch, hence the income of the fishermen. The study further examined the factors that influence productivity of fishermen in the study area. Year of education, mode of operation and frequency of fishing have important implication on the technical efficiency of fishermen in the study area.