26 resultados para Chloride of sodium
Resumo:
Arylsulfatase activity and growth were estimated in Escherichia coli, isolated from marine sediment. Maximum activity was observed at pH 6.6 whereas the maximum growth was at pH 5.6. 2x10ˉ³ M is the optimum substrate concentration for the highest level of enzyme activity/synthesis as well as for its growth. In general higher substrate concentration tended to inhibit enzyme activity and also the growth of the bacterium. Maximum growth and highest enzyme activity occurred at 29°C and above this temperature decreased both of them. Besides these, glucose, sodium sulfate, sodium chloride, sodium dihydrogen phosphate, sodium acetate and ammonium chloride at higher concentrations were inhibiting the enzyme activity and growth. Above 0.2% of glucose, 3% of sodium chloride, 10x10ˉ³ M concentrations of sodium sulfate, sodium dihydrogen phosphate, sodium acetate and ammonium chloride inhibited the activity and growth also. These observations indicate that, to generalize a compound as inhibitor or activator it is difficult since this depends not only on its concentration but also on the source of the enzyme when more than one type is encountered in nature.
Resumo:
Four chemical extenders in 7 different concentrations (potassium chloride, sodium chloride, glucose, sodium citrate, Ringer s solution, cow serum and milkfish (Chanos chanos) serum) were compared in the preservation of milkfish sperm. Results showed milkfish serum to be the most suitable of the various extenders tested. This may be attributed to suitable osmotic potential and/or presence of proteins which may have directly or indirectly influenced sperm viability. The effects of milkfish serum on the motility and fertilizing capacity of sperm at different durations of storage however need to be investigated.
Resumo:
Thirty-three groups of geochemically related natural lake and river waters collected from 368 sites scattered over East and West Africa, were investigated to determine correlations between their various ions and the patterns of change in their ionic composition across the African continent. The following nine significant correlations were found to exist in the entire area or in a major part of it: sodium and potassium; sodium and chloride; sodium and sulphate; potassium and ammonium; potassium and chloride; ammonium and nitrate; calcium and magnesium; magnesium and chloride; sulphate and chloride. When compared with the world average composition. The concentration of potassium in these waters was found to be high, that of calcium and nitrate was low. With respect to the area of East Africa only, trends in the pattern of change involving the ionic composition of the lake and river water and the longitude at which the sites were present, were found to exist for the ratio of sodium: conductivity (which showed an increase in the direction of West to East), magnesium: conductivity, and for the sum of calcium and magnesium: phosphate was generally found to increase in East Africa in the direction of west to East.
Resumo:
This short paper records some measurements made on the Little Sea, a shallow, coastal, acidic lake on Studland Heath, Dorset. The lake, formed about 100 years ago by dunes cutting off a sea inlet, has not received any input of agricultural fertilizers or other waste products for at least the last 30 years. It is a Site of Special Scientific Interest (SSSI). Samples of surface water were taken from the northern and southern ends of the lake at 3-monthly intervals, from July 1995 to April 1996. The first samples in July 1995 were taken during a period of drought; rain, sometimes very heavy, came in late September. With the exception of silicate, potassium and phosphate, there were no large changes in plant nutrient concentrations during the year. The concentration of nitrate-nitrogen was very low (close to the limits of analytical detection), but total phosphorus at ca. 30 mu g per litre was similar to concentrations found in some of the Cumbrian eutrophic lakes. The large number of algal species at low cell/colony concentrations suggested that the lake is mesotrophic. Sodium, chloride and magnesium in the lake water were close to the same proportions as those found in sea water. Dry and wet deposition of sea-salts on the lake surface and its catchment area probably is the major source of sodium, magnesium and chloride ions in the lake, and also accounts for about half of the mean potassium and sulphate concentrations.
Resumo:
There is no evidence of an increase in the acidity (lower pH or alkalinity) of water-bodies in the Lake District over the last 50 years. Brown trout occur in acid streams and upland tarns where pH is 4.5-5.2 throughout the year. Their occurrence in such waters in Britain and Ireland has been known for most of this century and there is no previous evidence of harmful effects on salmonid fisheries, though numbers of fish are naturally low. However, many benthic invertebrates that are common in hill-streams where pH is above 5.7 do not occur in more acid streams. This phenomenon occurs in the headwaters of several western rivers in Cumbria. It is not a recent response to "acid rain". Harmful effects of pH are undoubtedly more pronounced in waters that are poor in other dissolved ions. Low concentrations of sodium, potassium, calcium and chloride are especially important and may limit the distributions of some aquatic animals even where pH is above 5.7. The concentration of sulphate ions is usually relatively high but this is not important to the fauna; concentrations are at least two times higher in productive alkaline water-bodies than they are in unproductive acid waters.
Resumo:
This dataset provides raw data of chemical analyses made during studies on seasonal variations of 25 frequently sampled tarns in Cumbria. Measurements of sodium, calcium, potassium, magnesium, pH, chloride ions, alkalinity, sulphite, strong acids and nitrate were taken between 1954 and 1956 and between 1974-1976.
Resumo:
Results of preliminary studies on the use of sodium alginate as a protective coating for fishery products showed that several varieties of fishes and shell fish had better keeping qualities when coated with sodium alginate.
Resumo:
Sediment and water samples were collected from mangrove and estuarine biotopes at fortnightly intervals. The physico-chemical characters of the overlying water were studied. In the mangrove biotope maximum temperature (31.5°C) and in the estuarine biotope maximum salinity (35.6‰) were recorded during the summer season, whereas in post-monsoon period the sulphate content was increased to 516 p.p.m. and the pH was reduced to 7.4. Invariably both in the enriched sediment and water samples four major peaks (at wavelengths 460, 705, 772 and 850 nm) and two minor peaks (at wavelengths 580 and 663 nm) of absorption spectra were noticed. A pure culture of Chromatium sp., isolated from mangroves sediment, showed three peaks of absorption spectra at wavelengths, 500, 580 and 850 nm. The effect of sodium chloride on the growth of Chromatium sp., was also studied and it was observed that maximum growth occurred in the range 1-3% sodium chloride concentration. This isolate was also capable of utilizing various sulphur and carbon compounds. Glycerol and glucose did not show any specific effect whereas pyruvate, malate and acetate increased the growth.
Resumo:
Electroless coating is much appropriate process at engineering surface. Since the discovery of electroless nickel-phosphorus coating in 3996, due to technical and economic advantages as well as desirable characteristics such as resistance to corrosion, abrasion and a high hardness has found wide application at engineering industries. Properties of electroless nickel-phosphorus coating depend on the characteristics of the used bath and heat treatment. In this study, optimal conditions and concentration of sodium citrate, sodium acetate and lactic acid in the bath of electroless nickel-phosphorus coating to the steel ck67 surface was determined. Structure, chemical composition and phases occurring in the coating were investigated using Scanning Electron Microscope (SEM) and X-ray diffraction analysis (XRD). The corrosion behavior of coatings in solution 3.5٪ NaCl was studied using electrochemical. The results showed that corrosion resistance of the coating with composition sodium citrate, sodium acetate and lactic acid decreased respectively.
Resumo:
Pure Water, is a crucial demand of creature life. Following industrial development, extra amount of toxic metals such as chromium enters the environmental cycle through the sewage, which is considered as a serious threat for organisms. One of the modern methods of filtration and removal of contaminants in water, is applying Nano-technology. According to specific property of silicate materials, in this article we try to survey increased power in composites and various absorption in several morphologies and also synthesis of Nano-metal silicates with different morphologies as absorbent of metal toxic ions. At first, we synthesize nano zink silicate with three morphologies considering context and the purpose of this survey. 1) Nano synthesis of zink silicate hollow cavity by hydrothermal method in mixed solvent system of ethanol/glycol polyethylene. 2) Zink nano wires silicate in a water-based system by controlling the amount of sodium silicate. 3) Synthesis of nano zink silicate membrane. After synthesizing, we measured the cadmium ion absorbance by synthesized nano zink silicates. Controlling PH, is the applied absorption method. Next step, we synthesized nano zink-magnesium silicate composite in two various morphologies of nanowires and membrane by different precent of zink and magnesium, in order to optimize synthesized nano metal silicate. We used zink nitrate and magnesium nitrate and also measured cadmium absorption by synthesized nano metal silicates in the same way of PH control absorption. In the 3rd step, in order to determine the impact of the type of metal in nano metal silicate, we synthesized nano magnesium silicate and compared its absorption with nano zink silicate. Furthermore, we calculated the optimal concentration in one of synthesizes. Optimal concentration is the process which has the maximum absorption. While applying two methods of absorption in the test, finally we compared the effect of absorption method on the absorption level. Below you find further steps of synthesis: 1) Using IR, RAMAN, XRD spectroscopy to check the accuracy of synthesis. 2) Checking the dispersion of nano particles in ethanol solution by light microscope. 3) Measuring and observing particles with scanning electron microscope (SEM). 4) Using atomic absorption device for measuring the cadmium concentration in water-based solutions. The nano metal silicates were synthesized successfully. All of synthesized nano absorbents have the cadmium ion absorbency. The cadmium absorption via nano absorbents depend on various factors such as kind of metal in nano silicate and percent of metal in nano metal silicate composite. Meanwhile the absorption and PH control of medium containing the absorbent and solution would affect the cadmium absorption.
Resumo:
Although the live reef food fish trade has become an increasingly "hot" topic in the environmental press in recent months, many of the sources reporting on this practice have tended to focus on issues related to the rampant use of sodium cyanide in the trade, rather than the more pressing matter of the looming potential for overexploitation engendered by this practice. Presented in this article is a brief overview of the live reef food fish trade as it is practiced in eastern Indonesia covering the methods used and economics, geographic extent and numerous deleterious effects of the fishery.