EMI filter design of a three-phase buck-type rectifier for aircraft applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD- 461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out of the range. This approach is not valid for aircraft applications. In order to design the switching frequency in aircraft applications, the power losses in the semiconductors and the weight of the reactive components should be considered. The proposed design is based on a harmonic analysis of the rectifier input current and an analytical study of the input filter. The classical industrial design does not consider the inductive effect in the filter design because the grid frequency is 50/60Hz. However, in the aircraft applications, the grid frequency is 400Hz and the inductance cannot be neglected. The proposed design considers the inductance and the capacitance effect of the filter in order to obtain unitary power factor at full power. In the optimization process, several filters are designed for different switching frequencies of the converter. In addition, designs from single to five stages are considered. The power losses of the converter plus the EMI filter are estimated at these switching frequencies. Considering overall losses and minimal filter volume, the optimal switching frequency is selected

New Considerations in the Input Filter Design of a Three-Phase Buck-Type PWM Rectifier for Aircraft Applications

An EMI filter for a three-phase buck-type medium power pulse-width modulation rectifier is designed. This filter considers differential mode noise and complies with MIL-STD-461E for the frequency range of 10kHz to 10MHz. In industrial applications, the frequency range of the standard starts at 150kHz and the designer typically uses a switching frequency of 28kHz because the fifth harmonic is out of the range. This approach is not valid for aircraft applications. In order to design the switching frequency in aircraft applications, the power losses in the semiconductors and the weight of the reactive components should be considered. The proposed design is based on a harmonic analysis of the rectifier input current and an analytical study of the input filter. The classical industrial design does not consider the inductive effect in the filter design because the grid frequency is 50/60Hz. However, in the aircraft applications, the grid frequency is 400Hz and the inductance cannot be neglected. The proposed design considers the inductance and the capacitance effect of the filter in order to obtain unitary power factor at full power. In the optimization process, several filters are designed for different switching frequencies of the converter. In addition, designs from single to five stages are considered. The power losses of the converter plus the EMI filter are estimated at these switching frequencies. Considering overall losses and minimal filter volume, the optimal switching frequency is selected.

Optimizing three-phase planar transformer construction

A three-phase transformer with flat conductor layers is proposed in this article. This arrangement is used for high current density transformers. Cost effectiveness in planar magnetic are related with the optimization in the number of layers in each winding. This fact takes more relevance for the medium and high power three-phase transformers where the number of parallels to achieve the required DCR is increased. The proposed method allows the use of off-the-shell core shapes that are used for single phase transformers. Cost impact is significant and design implications become more flexible. The proposed solution has been validated and compared using the conventional and the proposed methodologies to design a high power (20 kW) transformer.

Analysis and optimized design of a distributed multi-stage EMC filter for an interleaved three-phase PWM-rectifier system for aircraft applications

Different possible input filter configurations for a modular three-phase PWM rectifier system consisting of three interleaved converter cells are studied. The system is designed for an aircraft application where MIL-STD-461E conducted EMI standards have to be met and system weight is a critical design issue. The importance of a LISN model on the simulated noise levels and the effect of interleaving and power unbalance between the different converter modules is discussed. The effect of the number of filter stages and the degree of distribution of the filter stages among the individual converter modules on the weight and losses of the input filter is studied and optimal filter structures are proposed.

An alternative for reducing the layers in the construction of three-phase planar transformers

A modified winding layout for three-phase transformers with PCB windings is proposed in this paper. This modified layout can be used in high current transformers with many PCB layers to simplify the fabrication process. One of the key factors that might increase the cost and complexity in the construction of planar transformers is the number of layers of each PCB winding. This issue becomes even more important in medium-high power three-phase transformers, where the number of PCB layers is higher. In addition to that, the proposed method allows the use of commercial core shapes that are commonly used to design single-phase transformers. This fact makes possible the reduction of cost and flexibility of the design solutions. The proposed solution has been validated and compared using the conventional and the proposed methodologies to design a high power (20 kW) transformer.

Adaptive Control for ZVS Three Phase Full Active Bridge Converter with ARCN

This paper presents an adaptive control for the auxiliary circuit, called ARCN (Auxiliary Resonant Commutating Network), used to achieve ZVS in full active bridge converters under a wide load range. Depending on the load conditions, the proposed control adapts the timing of the ARCN to minimize the losses. The principle of operation and implementation considerations are presented for a three phase full active bridge converter, proposing different methods to implement the control according to the specifications. The experimental results shown verify the proposed methodology.

Interleaved multi-cell isolated three-phase PWM rectifier system for aircraft applications

Recently there has been an important increase in electric equipment, as well as, electric power demand in aircrafts applications. This prompts to the necessity of efficient, reliable, and low-weight converters, especially rectifiers from 115VAC to 270VDC because these voltages are used in power distribution. In order to obtain a high efficiency, in aircraft application where the derating in semiconductors is high, normally several semiconductors are used in parallel to decrease the conduction losses. However, this is in conflict with high reliability. To match both goals of high efficiency and reliability, this work proposes an interleaved multi-cell rectifier system, employing several converter cells in parallel instead of parallel-connected semiconductors. In this work a 10kW multi-cell isolated rectifier system has been designed where each cell is composed of a buck type rectifier and a full bridge DC-DC converter. The implemented system exhibits 91% of efficiency, high power density (10kW/10kg), low THD (2.5%), and n−1 fault tolerance which complies, with military aircraft standards.

Diseño y aplicación de una metodología prospectiva para la determinación de los condicionantes futuros del crecimiento de los grandes buques portacontenedores

Durante las últimas décadas se observa una tendencia sostenida al crecimiento en las dimensiones de los grandes buques portacontenedores, que produce, que las infraestructuras portuarias y otras destinadas al tráfico de contenedores deban adaptarse para poder brindar los servicios correspondientes y mantenerse competitivas con otras para no perder el mercado. Esta situación implica importantes inversiones y modificaciones en los sistemas de transporte de contenedores por el gran volumen de carga que se debe mover en un corto periodo de tiempo, lo que genera la necesidad de tomar previsiones relacionadas con la probable evolución a futuro de las dimensiones que alcanzarán los grandes buques portacontenedores. En relación a los aspectos citados surge la inquietud de determinar los condicionantes futuros del crecimiento de los grandes buques portacontenedores, con una visión totalizadora de todos los factores que incidirán en los próximos años, ya sea como un freno o un impulso a la tendencia que se verifica en el pasado y en el presente. En consideración a que el tema a tratar y resolver se encuentra en el futuro, con un horizonte de predicción de veinte años, se diseña y se aplica una metodología prospectiva, que permite alcanzar conclusiones con mayor grado de objetividad sobre probables escenarios futuros. La metodología prospectiva diseñada, conjuga distintas herramientas metodológicas, cualitativas, semi-cuantitativas y cuantitativas que se validan entre sí. Sobre la base del pasado y el presente, las herramientas cuantitativas permiten encontrar relaciones entre variables y hacer proyecciones, sin embargo, estas metodologías pierden validez más allá de los tres a cuatro años, por los vertiginosos y dinámicos cambios que se producen actualmente, en las áreas política, social y económica. Las metodologías semi-cuantitativas y cualitativas, empleadas en forma conjunta e integradas, permiten el análisis de circunstancias del pasado y del presente, obteniendo resultados cuantitativos que se pueden proyectar hacia un futuro cercano, los que integrados en estudios cualitativos proporcionan resultados a largo plazo, facilitando considerar variables cualitativas como la creciente preocupación por la preservación del medio ambiente y la piratería. La presente tesis, tiene como objetivo principal “identificar los condicionantes futuros del crecimiento de los grandes buques portacontenedores y determinar sus escenarios”. Para lo cual, la misma se estructura en fases consecutivas y que se retroalimentan continuamente. Las tres primeras fases son un enfoque sobre el pasado y el presente, que establece el problema a resolver. Se estudian los antecedentes y el estado del conocimiento en relación a los factores y circunstancias que motivaron y facilitaron la tendencia al crecimiento de los grandes buques. También se estudia el estado del conocimiento de las metodologías para predecir el futuro y se diseña de una metodología prospectiva. La cuarta fase, denominada Resultados, se desarrolla en distintas etapas, fundamentadas en las fases anteriores, con el fin de resolver el problema dando respuestas a las preguntas que se formularon para alcanzar el objetivo fijado. En el proceso de esta fase, con el objeto de predecir probables futuros, se aplica la metodología prospectiva diseñada, que contempla el análisis del pasado y el presente, que determina los factores cuya influencia provocó el crecimiento en dimensiones de los grandes buques hasta la actualidad, y que constituye la base para emplear los métodos prospectivos que permiten determinar qué factores condicionarán en el futuro la evolución de los grandes buques. El probable escenario futuro formado por los factores determinados por el criterio experto, es validado mediante un modelo cuantitativo dinámico, que además de obtener el probable escenario futuro basado en las tendencias de comportamiento hasta el presente de los factores determinantes considerados, permite estudiar distintos probables escenarios futuros en función de considerar un cambio en la tendencia futura de los factores determinantes. El análisis del pasado indica que la tendencia al crecimiento de los grandes buques portacontenedores hasta el presente, se ha motivado por un crecimiento económico mundial que se tradujo en un aumento del comercio internacional, particularmente entre los países de Asia, con Europa y Estados Unidos. Esta tendencia se ha visto favorecida por el factor globalización y la acelerada evolución tecnológica que ha permitido superar los obstáculos que se presentaron. Es de destacar que aún en periodos de crisis económicas, con pronósticos de contracciones en el comercio, en los últimos años continuó la tendencia al crecimiento en dimensiones, en busca de una economía de escala para el transporte marítimo de contenedores, en las rutas transoceánicas. La investigación de la evolución de los grandes buques portacontenedores en el futuro, se efectúa mediante el empleo de una metodología prospectiva en la que el criterio experto se valida con un método cuantitativo dinámico, y además se fundamenta en una solida base pre-prospectiva. La metodología diseñada permite evaluar con un alto grado de objetividad cuales serán los condicionantes que incidirán en el crecimiento en tamaño de los grandes buques portacontenedores en el escenario con mayor probabilidad de acontecer en los próximos veinte años (2032), y también en otros escenarios que podrían presentarse en el caso de que los factores modifiquen su tendencia o bien se produzcan hechos aleatorios. El resultado se sintetiza en que la tendencia al crecimiento de los grandes buques portacontenedores en los próximos 20 años se verá condicionada por factores en relación a los conceptos de oferta (los que facilitan u obstaculizan la tendencia), demanda (los que motivan o impulsan la tendencia) y factores externos (los que desestabilizan el equilibrio entre oferta y demanda). La tendencia al crecimiento de los grandes buques portacontenedores se verá obstaculizada / limitada principalmente por factores relacionados a las infraestructuras, resultando los pasos y/o canales vinculados a las rutas marítimas, los limitantes futuros al crecimiento en dimensiones de los grandes buques portacontenedores; y la interacción buque / infraestructura (grúas) un factor que tenderá a obstaculizar esta tendencia de los grandes portacontenedores. El desarrollo económico mundial que estimula el comercio internacional y los factores precio del petróleo y condicionantes medioambientales impulsarán la tendencia al crecimiento de los grandes buques portacontenedores. Recent years have seen a sustained tendency towards the growth in the dimensions of large container ships. This has meant that port and other infrastructure used for container traffic has had to be adapted in order to provide the required services and to maintain a competitive position, so as not to lose market share. This situation implies the need for major investments in modifications to the container transport system, on account of the large volume of traffic to be handled in a short period of time. This in turn has generated a need to make provision for the probable future evolution of the ultimate dimensions that will be reached by large container ships. Such considerations give rise to the question of what are the future determinants for the growth of large container ships, requiring an overall vision of all the factors that will apply in future years, whether as a brake on or an incentive to the growth tendency which has been seen in the past and present In view of the fact that the theme to be dealt with and resolved relates to the future, with a forecasting horizon of some 20 years, a foresight methodology has been designed and applied so as to enable conclusions about probable future scenarios to be reached with a greater degree of objectivity. The designed methodology contains different methodological tools, both qualitative, semi-quantitative and quantitative, which are internally consistent. On the basis of past and present observations, the quantitative elements enable relationships to be established and forecasts to be made. Nevertheless such an approach loses validity more than three or four years into the future, on account of the very rapid and dynamic changes which may be seen at present in political, social and economic spheres. The semi-quantitative and qualitative methodologies are used coherently together and allow the analysis of past and present conditions, thus obtaining quantitative results which for short-term projections, which when integrated with the qualitative studies provide results for the long-term, facilitating the consideration of qualitative variables such as the increasing importance of environmental protection and the impact of piracy. The principal objective of the present thesis is "to identify the future conditions affecting the growth of large container ships and to determine possible scenarios". The thesis is structured in consecutive and related phases. The first three phases focus on the past and present in order to determine the problem to be resolved. The background is studied in order to establish the state of knowledge about the factors and circumstances which have motivated and facilitated the growth tendency for large container ships and the methodologies that have been used. In this way a specific foresight methodology is designed. The fourth phase, Results, is developed in distinct stages based on the previous phases, so as to resolve the problem posed and responding to the questions that arise. In this way the determined objective is reached. The fourth phase sees the application of the methodology that has been designed in order to predict posible futures. This includes analysis of the past and present factors which have caused the growth in the dimensions of large container ships up to the present. These provide the basis on which to apply the foresight methods which enable the future factors which will condition the development of such large container ships. The probable future scenarios are made up of the factors identified by expert judgement (using the Delphi technique) and validated by means of a dynamic quantitative model. This model both identifies the probable future scenarios based on past and present factors and enables the different future scenarios to be analysed as a function of future changes in the conditioning factors. Analysis of the past shows that the growth tendency up to the present for large container ships has been motivated by the growth of the world economy and the consequent increased international trade, especially between the countries of Asia with Europe and the United States. This tendency has been favoured by the trend towards globalization and by the rapid technical evolution in ship design, which has allowed the obstacles encountered to be overcome. It should be noted that even in periods of economic crisis, with an expectation for reduced trade, as experienced in recent years, the tendency towards increased ship dimensions has continued in search of economies of scale for the maritime transport of containers on transoceanic routes. The present investigation of the future evolution of large container ships has been done using a foresight methodology in which the expert judgement is validated by a dynamic quantitative methodology, founded on a firm pre-foresight analysis. The methodology that has been designed permits the evaluation, with a high degree of objectivity, of the future factors that will affect the growth of large container ships for the most probable scenario expected in the next 20 years (up to 2032). The evaluation applies also to other scenarios which may arise, in the event that their component factors are modified or indeed in the light of random events. In summary, the conclusión is that the tendency for growth in large container ships in the future 20 years will be determined by: factors related to supply, which slow or halt the tendency; factors related to demand, which encourage the tendency and finally, external factors which interrupt the equilibrium between supply and demand. The tendency for increasing growth in large container ships will be limited or even halted by factors related to infrastructure, including the natural and man-made straits and canals used by maritime transport. In addition the infrastructure required to serve such vessels both in port (including cranes and other equipment) and related transport, will tend to slow the growth tendency. The factors which will continue to encourage the tendency towards the growth of large container ships include world economic development, which stimulates international trade, and an increasing emphasis on environmental aspects.

Consideration of Multi-Phase Criterion in the Differential Protection Algorithm for High-Impedance Grounded Synchronous Generators

The generator differential protection is one of the most important electrical protections of synchronous generator stator windings. Its operation principle is based on the comparison of the input current and output current at each phase winding. Unwanted trip commands are usually caused by CT saturation, wrong CT selection, or the fact that they may come from different manufacturers. In generators grounded through high impedance, only phase-to-phase or three-phase faults can be detected by the differential protection. This kind of fault causes differential current to flow in, at least, two phases of the winding. Several cases of unwanted trip commands caused by the appearance of differential current in only one phase of the generator have been reported. In this paper multi-phase criterion is proposed for generator differential protection algorithm when applied to high impedance grounded generators.